Holding Tools for O.D. Tuning（Applicable Tip Shape：T (Triangle)）

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-M Type Tool Bit MTJN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Clamp on + pin lock type. General / Profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter / Profiling	Double Clamp	20 ～ 32	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WTJN-N Type (outer diameter, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Wedge Lock	-	-

  From: 2,255,783 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter	Cable clamp	16 ～ 32	16 ～ 32

  From: 3,310,621 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, TTGN/WTGN

  NGK SPARK PLUG

  [Features]· For TN (equilateral triangle) inserts· Multi clamp

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on / Cable clamp	-	-

  From: 4,521,053 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, STAC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	8 ～ 20	8 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, STGC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	8 ～ 20	8 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 type byte ETAN type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PTGN Type (Outer Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter	Lever lock	12 ～ 25	12 ～ 25

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WTKN-N Type (outer diameter, end surface, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Wedge Lock	-	-

  From: 2,255,783 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Negative Shank Bit for O.D.

  SANDVIK

  Outer diameter turning shank tool bit that realizes high productivity, high efficiency and high quality machining solutions

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter / Profiling	Wedge Lock	32	32

  From: 4,559,740 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Back-Turning, GTT

  NGK SPARK PLUG

  [Features]Front/back common tightening type· Can be equipped with the grooving inserts, GTM32, GTMH32 or GTMX32.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand / Left-hand	Post-Grinding	-	-	-

  From: 2,684,370 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for SEC-Solid Sumi Boron FN21

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: Negative 0° (N)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	25	25

  From: 3,777,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, ETXN Type

  SUMITOMO ELECTRIC HARDMETAL

  Pin lock type, for general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, MTXN Type

  SUMITOMO ELECTRIC HARDMETAL

  Clamp on and pin lock type, for general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Double Clamp	20 ～ 25	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Turning Tool Bit, CTFP Type

  SUMITOMO ELECTRIC HARDMETAL

  Clamp-on. For flanges.[Features]·Stable clamping improves wear resistance of inserts·High index precision improves machining precision·It is possible to replace the insert from the underside of the tool bit·It is ideal for high-efficiency, intermittent, high-hardness material machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand	Outer Diameter / End Face	Clamp-on	19 ～ 25	19 ～ 25

  From: 3,310,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Turning Tool Bit, CTGP Type

  SUMITOMO ELECTRIC HARDMETAL

  Clamp-on. For general turning.[Features]·Stable clamping improves wear resistance of inserts·High index precision improves machining precision·It is possible to replace the insert from the underside of the tool bit·It is ideal for high-efficiency, intermittent, high-hardness material machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand	Outer Diameter	Clamp-on	19 ～ 25	19 ～ 25

  From: 3,310,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Tool Bit, DTFN Type

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp. For flanges.[Features]·Stable clamping improves wear resistance of inserts·High index precision improves machining precision·It is possible to replace the insert from the underside of the tool bit·It is ideal for high-efficiency, intermittent, high-hardness material machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Bit, DTGN Type

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type. For General Outer Diameter Cutting

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 Type Tool Bit ETAN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Pin lock type. Outer diameter, for general cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 Type Bit, ETEN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	No-hand	Outer Diameter / Profiling	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 Type Tool Bit ETFN Type (Cutting Direction: Left)

  SUMITOMO ELECTRIC HARDMETAL

  Pin lock type. For end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 Type Bit ETFN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 Type Bit ETGN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 Type Tool Bit ETGN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Pin lock type. Outer diameter, for general cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-M Type Tool Bit MTJN Type (Cutting Direction: Left)

  SUMITOMO ELECTRIC HARDMETAL

  Clamp on + pin lock type. General / Profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter / Profiling	Double Clamp	20 ～ 32	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit, PTFN Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-70 type tool bit PTFN type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Bit PTGN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter	Lever lock	16 ～ 25	16 ～ 25

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit PTGN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Lever lock type. Outer diameter, for general cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Lever lock	16 ～ 25	16 ～ 25

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 type tool PTTN type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter	Lever lock	16 ～ 25	16 ～ 25

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit PTTN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Lever lock type. Outer diameter, for general cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Lever lock	16 ～ 25	16 ～ 25

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-for Solid Sumiboron Bit, CTGN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Clamp-on	25	25

  From: 3,649,738 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DTGN Type (Outer Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter	Cable clamp	-	-

  From: 1,969,949 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PTFN Type (End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Lever lock	12 ～ 25	12 ～ 25

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WTEN-N Type (outer diameter, chamfer machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	No-hand	Outer Diameter / Chamfer	Wedge Lock	-	-

  From: 2,255,783 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CTJN Type (Outer Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 2,031,129 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CTUN Type (End Machining)

  KYOCERA

  [Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Clamp-on	-	-

  From: 2,031,129 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CTJN-A Type (Outer Diameter Machining)

  KYOCERA

  Holder for clamp-on type solid CBN tools.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STGC (P) Type (Outside Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STLN Type (without offset) (outer diameter, pull end surface machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PTLN-FF Type (without Offset) (External Diameter, Pull End Face Machining)

  KYOCERA

  Lever lock type negative holder for automatic lathe.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Lever lock	-	-

  From: 1,813,754 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  QS Holding System Stepping CoroTurn 107 Bit

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	Outer Diameter	Clamp-on	16	16

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit / T-Max P Lever Clamp, PTGNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter	Lever lock	16 ～ 25	16 ～ 25

  From: 3,097,514 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, 177.9

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	No-hand	End Face	-	20 ～ 25	9 ～ 13

  From: 4,102,268 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, CTFPR/L

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand / Left-hand	End Face	Clamp-on	-	-

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, CTGPR/L

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	Outer Diameter	Clamp-on	32	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	SANDVIK	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	SANDVIK	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	SEC-M Type Tool Bit MTJN Type (Cutting Direction: Right)	WTJN-N Type (outer diameter, profile machining)	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L	Holder For Outer Diameter Machining, TTGN/WTGN	SEC-Mini Bit, STAC Type	SEC-Mini Bit, STGC Type	SEC-30 type byte ETAN type	PTGN Type (Outer Diameter Machining)	WTKN-N Type (outer diameter, end surface, profile machining)	T-Max P Negative Shank Bit for O.D.	Holder For Back-Turning, GTT	Tool Bit for SEC-Solid Sumi Boron FN21	SEC-Outer Diameter Bit, ETXN Type	SEC-Outer Diameter Bit, MTXN Type	SEC-Turning Tool Bit, CTFP Type	SEC-Turning Tool Bit, CTGP Type	SEC-D Type Tool Bit, DTFN Type	SEC-D Type Bit, DTGN Type	SEC-30 Type Tool Bit ETAN Type (Cutting Direction: Right)	SEC-30 Type Bit, ETEN Type	SEC-30 Type Tool Bit ETFN Type (Cutting Direction: Left)	SEC-30 Type Bit ETFN Type	SEC-30 Type Bit ETGN Type	SEC-30 Type Tool Bit ETGN Type (Cutting Direction: Right)	SEC-M Type Tool Bit MTJN Type (Cutting Direction: Left)	SEC-70 Type Tool Bit, PTFN Type	SEC-70 Type Bit PTGN Type	SEC-70 Type Tool Bit PTGN Type (Cutting Direction: Right)	SEC-70 type tool PTTN type	SEC-70 Type Tool Bit PTTN Type (Cutting Direction: Right)	SEC-for Solid Sumiboron Bit, CTGN Type	DTGN Type (Outer Diameter Machining)	PTFN Type (End Face Machining)	WTEN-N Type (outer diameter, chamfer machining)	CTJN Type (Outer Diameter Machining)	CTUN Type (End Machining)	CTJN-A Type (Outer Diameter Machining)	STGC (P) Type (Outside Diameter Machining)	STLN Type (without offset) (outer diameter, pull end surface machining)	PTLN-FF Type (without Offset) (External Diameter, Pull End Face Machining)	QS Holding System Stepping CoroTurn 107 Bit	Shank Tool Bit / T-Max P Lever Clamp, PTGNR/L	T-Max S Shank Tool Bit For Turning, 177.9	T-Max S Shank Tool Bit For Turning, CTFPR/L	T-Max S Shank Tool Bit For Turning, CTGPR/L
From	2,589,616 VND	2,255,783 VND	3,310,621 VND	4,521,053 VND	1,739,394 VND	1,739,394 VND	1,268,644 VND	1,803,918 VND	2,255,783 VND	4,559,740 VND	2,684,370 VND	3,777,015 VND	1,268,644 VND	2,589,616 VND	3,310,593 VND	3,310,593 VND	1,944,769 VND	1,944,769 VND	1,268,644 VND	1,268,644 VND	1,268,644 VND	1,268,644 VND	1,268,644 VND	1,268,644 VND	2,589,616 VND	1,771,263 VND	1,771,263 VND	1,771,263 VND	1,771,263 VND	1,771,263 VND	3,649,738 VND	1,969,949 VND	1,803,918 VND	2,255,783 VND	2,031,129 VND	2,031,129 VND	3,746,327 VND	1,663,657 VND	1,663,657 VND	1,813,754 VND	9,413,108 VND	3,097,514 VND	4,102,268 VND	3,447,280 VND	5,519,688 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	15 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Applicable Tip Shape	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)
Applicable Chip Clearance Angle	Negative	Negative	Negative	-	Pozidriv	Pozidriv	Negative	Negative	Negative	Negative	-	-	Negative	Negative	Pozidriv	Pozidriv	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Pozidriv	Negative	Negative	-	Negative	-	-	-
Selfishly	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	No-hand	Left-hand	Right-hand	Left-hand	Right-hand	Left-hand	Right-hand / Left-hand	Left-hand	Right-hand	Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand	Left-hand	No-hand	Right-hand / Left-hand	Right-hand
Application	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling	Post-Grinding	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter	End Face	Outer Diameter	Outer Diameter	Outer Diameter / Profiling	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter / Profiling	End Face	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	End Face	Outer Diameter / Chamfer	Outer Diameter	End Face	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	End Face	End Face	Outer Diameter
Clamp Shape	Double Clamp	Wedge Lock	Cable clamp	Clamp-on / Cable clamp	Screw-on	Screw-on	Pin Lock	Lever lock	Wedge Lock	Wedge Lock	-	Clamp-on	Pin Lock	Double Clamp	Clamp-on	Clamp-on	Cable clamp	Cable clamp	Pin Lock	Pin Lock	Pin Lock	Pin Lock	Pin Lock	Pin Lock	Double Clamp	Lever lock	Lever lock	Lever lock	Lever lock	Lever lock	Clamp-on	Cable clamp	Lever lock	Wedge Lock	Clamp-on	Clamp-on	Clamp-on	Screw-on	Screw-on	Lever lock	Clamp-on	Lever lock	-	Clamp-on	Clamp-on
Shank height(mm)	20 ～ 32	-	16 ～ 32	-	8 ～ 20	8 ～ 20	12 ～ 25	12 ～ 25	-	32	-	25	12 ～ 25	20 ～ 25	19 ～ 25	19 ～ 25	20 ～ 25	20 ～ 25	12 ～ 25	12 ～ 25	12 ～ 25	12 ～ 25	12 ～ 25	12 ～ 25	20 ～ 32	16 ～ 32	16 ～ 25	16 ～ 25	16 ～ 25	16 ～ 25	25	-	12 ～ 25	-	-	-	-	-	-	-	16	16 ～ 25	20 ～ 25	-	32
Shank width(mm)	20 ～ 25	-	16 ～ 32	-	8 ～ 20	8 ～ 20	12 ～ 25	12 ～ 25	-	32	-	25	12 ～ 25	20 ～ 25	19 ～ 25	19 ～ 25	20 ～ 25	20 ～ 25	12 ～ 25	12 ～ 25	12 ～ 25	12 ～ 25	12 ～ 25	12 ～ 25	20 ～ 25	16 ～ 32	16 ～ 25	16 ～ 25	16 ～ 25	16 ～ 25	25	-	12 ～ 25	-	-	-	-	-	-	-	16	16 ～ 25	9 ～ 13	-	25

Loading...Tải…