Holding Tools for O.D. Tuning（Clamp Shape：Clamp-on Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCACR-E06

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	10 ～ 12	10 ～ 12

  From: 3,151,713 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCLCR-E09

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	12 ～ 16	12 ～ 16

  From: 4,307,846 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCLCR1212E

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / End Face / Chamfer	Clamp-on	12	12

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SDJCR

  SANDVIK

  Sandvik Outer Holder Tool for Small Lathe Shank Bit Short Bit for QS Holding System QS- SDJCR

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 4,179,211 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDJCR1012E

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	10 ～ 16	12 ～ 16

  From: 9,128,618 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	12 ～ 16	12 ～ 16

  From: 4,307,846 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L

  SANDVIK

  Sandvik Outer Diameter Holder Small Lathe Tool Shank Bit QS Holding System Short Bit QS- SVABR/L

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	12	12

  From: 4,739,186 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand / Left-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 4,681,093 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJCR/L-E11HP

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand / Left-hand	Outer Diameter / Profiling	Clamp-on	10 ～ 16	10 ～ 16

  From: 9,824,271 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVVBN1616E11

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	No-hand	Outer Diameter / Profiling	Clamp-on	8.3	16

  From: 5,061,645 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, CoroTurn, 107, SVABR/LKS

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand / Left-hand	Outer Diameter / Profiling	Clamp-on	8 ～ 16	10 ～ 16

  From: 3,958,685 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSDNN -4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	No-hand	Outer Diameter / Post-Grinding	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSKNR/L -4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	End Face	Clamp-on	-	-

  From: 10,902,832 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSRNR/L -4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp,CRDCN5040T-ID

  SANDVIK

  Excellent chip control and process stability for best part quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	50	40

  From: 12,786,812 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp, CRSNR/L5040T25

  SANDVIK

  Excellent chip control and process stability for best part quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand / Left-hand	Outer Diameter / End Face / Profiling / Post-Grinding	Clamp-on	50	40

  From: 12,786,812 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13JCR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Clamp-on	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13MCL

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / End Face / Profiling	Clamp-on	-	-

  From: 10,095,240 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13NCN

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13JBR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 9,412,865 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13MBL

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Left-hand	Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding	Clamp-on	-	-

  From: 10,606,644 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13VBN

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	-	-

  From: 10,201,168 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11

  SANDVIK

  [Features]An outer-diameter turning tool featuring stable insert clamping and excellent repeatability. Produces an unimpeded flow of cutting chips. Requires little space for operation. Features a small number of component parts. For outer-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Clamp-on	12 ～ 16	12 ～ 16

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STJCR/L-K11-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Clamp-on	12 ～ 16	12 ～ 16

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-11

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Clamp-on	-	-

  From: 3,958,685 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto, DSSNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Clamp-on	-	-

  From: 10,956,711 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C17

  NGK SPARK PLUG

  [Applications]Can be used for external machining.[Features]Clamp-on method.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 3,903,513 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C15

  NGK SPARK PLUG

  [Features]· For SN (square) inserts· For end surface machining· Clamp-on type

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 3,903,513 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C12/CSSN

  NGK SPARK PLUG

  [Features]· For SN (square) inserts· For end surface machining· Clamp-on type

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 3,903,513 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C14/CSDN

  NGK SPARK PLUG

  [Features]· For SN (square) inserts· Clamp-on type

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	No-hand	Outer Diameter	Clamp-on	-	-

  From: 3,903,513 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C11

  NGK SPARK PLUG

  [Features]· For SN (square) inserts· Clamp-on type

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 3,903,513 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, TTGN/WTGN

  NGK SPARK PLUG

  [Features]· For TN (equilateral triangle) inserts· Multi clamp

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 4,521,053 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C31/CCLN

  NGK SPARK PLUG

  [Features]· For CN (diamond 80°) inserts· For outer diameter and end surface machining· Clamp-on type

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	-	-

  From: 3,903,513 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C54/CRDN

  NGK SPARK PLUG

  This is a holder for outer diameter processing made by NGK SPARK PLUG.Circular shape, RN□N1204 (1207) inserts are compatible.The clamping method is clamp-on.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	No-hand	Outer Diameter	Clamp-on	-	-

  From: 4,142,560 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG
Product SeriesDòng sản phẩm	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCACR-E06	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCLCR-E09	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCLCR1212E	Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SDJCR	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDJCR1012E	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11	Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJCR/L-E11HP	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVVBN1616E11	Shank Tool Bit, Outer Diameter Turning Compact Lathes, CoroTurn, 107, SVABR/LKS	Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSDNN -4	Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSKNR/L -4	Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSRNR/L -4	Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp,CRDCN5040T-ID	Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp, CRSNR/L5040T25	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13JCR/L	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13MCL	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13NCN	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13JBR/L	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13MBL	Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13VBN	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STJCR/L-K11-S	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-11	Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto, DSSNR/L	Holder For Outer Diameter Machining, C17	Holder For Outer Diameter Machining, C15	Holder For Outer Diameter Machining, C12/CSSN	Holder For Outer Diameter Machining, C14/CSDN	Holder For Outer Diameter Machining, C11	Holder For Outer Diameter Machining, TTGN/WTGN	Holder For Outer Diameter Machining, C31/CCLN	Holder For Outer Diameter Machining, C54/CRDN
From	3,151,713 VND	4,307,846 VND	9,413,108 VND	4,179,211 VND	9,128,618 VND	4,307,846 VND	4,739,186 VND	4,681,093 VND	9,824,271 VND	5,061,645 VND	3,958,685 VND	9,772,263 VND	10,902,832 VND	9,772,263 VND	12,786,812 VND	12,786,812 VND	7,915,072 VND	10,095,240 VND	7,915,072 VND	9,412,865 VND	10,606,644 VND	10,201,168 VND	3,339,521 VND	3,339,521 VND	3,958,685 VND	10,956,711 VND	3,903,513 VND	3,903,513 VND	3,903,513 VND	3,903,513 VND	3,903,513 VND	4,521,053 VND	3,903,513 VND	4,142,560 VND
Days to ShipSố ngày giao hàng	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	15 Day(s) or more	15 Day(s) or more	15 Day(s) or more	15 Day(s) or more	15 Day(s) or more	15 Day(s) or more	15 Day(s) or more	15 Day(s) or more
Applicable Tip Shape	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	S (Rectangular)	S (Rectangular)	S (Rectangular)	R (Circular)	R (Circular)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	T (Triangle)	T (Triangle)	V (35° Diamond-Shaped)	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	T (Triangle)	C (80° Diamond-Shape)	R (Circular)
Applicable Chip Clearance Angle	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	-	-	-	-	-	-	-	-	-
Selfishly	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	No-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	No-hand	Right-hand / Left-hand	Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand
Application	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Post-Grinding	End Face	Outer Diameter	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / End Face / Profiling / Post-Grinding	Outer Diameter / End Face / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding	Outer Diameter / Profiling / Post-Grinding	Outer Diameter	Outer Diameter	Outer Diameter / End Face / Profiling	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter / End Face	Outer Diameter
Clamp Shape	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on
Shank height(mm)	10 ～ 12	12 ～ 16	12	-	10 ～ 16	12 ～ 16	12	-	10 ～ 16	8.3	8 ～ 16	-	-	-	50	50	-	-	-	-	-	-	12 ～ 16	12 ～ 16	-	-	-	-	-	-	-	-	-	-
Shank width(mm)	10 ～ 12	12 ～ 16	12	-	12 ～ 16	12 ～ 16	12	-	10 ～ 16	16	10 ～ 16	-	-	-	40	40	-	-	-	-	-	-	12 ～ 16	12 ～ 16	-	-	-	-	-	-	-	-	-	-

Loading...Tải…