Holding Tools for O.D. Tuning（Clamp Shape：Screw-on）

• You can add up to 6 items per a category to the compare list. Compare

  

  SVJB-FF Type (not offset) (outer diameter, profile machining)

  KYOCERA

  Back surface clamping type / screw clamping type small tool holder (outer diameter).

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Screw-on type. General / Profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	8 ～ 25	8 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVPB Type (outer diameter, end surface, profile, relief machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Screw-on	10 ～ 25	10 ～ 25

  From: 1,865,295 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDLC-FF Type (without Offset) (External Diameter / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SV Type Profiling Tool Bit, SVJC Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-SV type profiling tool bit SVJC type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	20 ～ 32	20 ～ 25

  From: 2,886,466 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDJC Type (External Diameter, Profiling) Holder

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVJB Type (outer diameter, profile machining)

  KYOCERA

  Back surface clamping type / screw clamping type small tool holder (outer diameter).

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,969,949 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SCLC Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / End Face	Screw-on	11 ～ 23	11 ～ 23

  From: 4,825,924 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVLP Type (outer diameter, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 2,888,826 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCLC Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face	Screw-on	10 ～ 25	10 ～ 25

  From: 1,701,821 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder

  KYOCERA

  [Features]·This is SDJC-FF type[Applications]·For small tools, general turning holders, machining of outer diameter and profiling

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / End Face / Profiling	Screw-on	-	-

  From: 1,826,934 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SDLC Type (External Diameter, Copy Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 4,787,761 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit Applicable With DE○○ Insert, Aluminum Alloy Tool Bit for Outer Diameter and Profile Processing

  MITSUBISHI MATERIALS

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 20° (E); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand / No-hand	Outer Diameter / Profiling	Screw-on	16 ～ 20	16 ～ 20

  From: 2,694,258 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit

  MITSUBISHI MATERIALS

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 15° (D); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	20 ～ 25	20 ～ 25

  From: 3,316,034 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, SDNC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling	Screw-on	10 ～ 20	10 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, STAC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	8 ～ 20	8 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, STGC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	8 ～ 20	8 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, SVPC Type

  SUMITOMO ELECTRIC HARDMETAL

  Screw-on type, for necking[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 25	10 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, SVVC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	No-hand	Outer Diameter / Profiling	Screw-on	20 ～ 32	20 ～ 25

  From: 2,886,466 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Left)

  SUMITOMO ELECTRIC HARDMETAL

  Screw-on type. General / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / End Face	Screw-on	8 ～ 25	8 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Screw-on type. General / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / End Face	Screw-on	8 ～ 25	8 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SD type copying tool SDJC type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 25	10 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Tool Bit, Zero Offset Holder, SVJC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit offset 0 holder SVJC-X type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 12	10 ～ 12

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Tool Bit, SCAC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit SCAC-X type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-MINI Tool Holder Zero Offset Holder SCLC-X Type (Cutting Direction: Left)

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / End Face	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-MINI Tool Holder Zero Offset Holder SCLC-X Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / End Face	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Tool Bit, Zero Offset Holder, SDAC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit offset 0 holder SDAC-X type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit Offset 0 Holder SDJC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Tool Bit, Zero Offset Holder, SDJC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit offset 0 holder SDJC-X type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SWC-SV type Mini-bite SVLC type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 25	10 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SWC-SV Type Mini Tool Holder SVLC Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Screw-on type. For general / profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	10 ～ 25	10 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Tool Bit (11° Positive), SVLP Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit (11° positive) SVLP type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 16	10 ～ 16

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HELI TURN, SLANR/L (for Outer Diameter Machining)

  ISCAR

  [Applications]Can be used for external machining.[Features]Supports high-cut and high-feed machining, leading to high metal removal rate and high productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand / Left-hand	Outer Diameter	Screw-on	20 ～ 32	20 ～ 32

  From: 2,981,936 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PENTACUT , Toolholder for Parting, Grooving (Shallow Groove), Multifunctional Tool

  ISCAR

  For cutting off, grooving, and multi-functional machining (for shallow grooves)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand / Left-hand	Outer Diameter	Screw-on	12 ～ 25	12 ～ 25

  From: 3,140,205 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder for Outer Diameter Machining STFCR/L, STGCR/L

  ISCAR

  [Applications]Can be used for external machining.[Features]A screw-on type that can firmly fix the insert.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	Outer Diameter	Screw-on	12 ～ 25	12 ～ 25

  From: 1,828,830 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder for Outer Diameter Machining (Screw Clamp) SCLCR/L

  ISCAR

  Various inserts can be mounted.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter	Screw-on	8 ～ 25	8 ～ 25

  From: 1,828,830 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder for Outer Diameter Machining (Screw Clamp) SRGCR/L, SRDCN

  ISCAR

  [Applications]Can be used for external machining.[Features]Supports both left and right cutting directions.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand	Outer Diameter	Screw-on	20	20

  From: 2,054,928 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder for Blank Forming (One Corner Usage for Blank Forming)

  ISCAR

  [Applications]Can be used for machining for shape forming.[Features]A blank plate can be clamped with a screw.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	No-hand	Outer Diameter	Screw-on	12	12

  From: 3,537,826 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCLC-FF Type (without Offset) (External Diameter / End Face Machining)

  KYOCERA

  [Features]·This is SCLC-FF type[Applications]·For small tools, general turning holders, machining of outer diameter and flange

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face	Screw-on	8 ～ 18	8 ～ 16

  From: 1,701,821 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDXC Type (External Diameter, End Face, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDNC-F Type (External Diameter, Profiling)

  KYOCERA

  Screw clamping type small tool holder (outer diameter).

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDNC Type (External Diameter, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDLP-FF Type (without Offset) (External Diameter / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STGC (P) Type (Outside Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	SVJB-FF Type (not offset) (outer diameter, profile machining)	SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)	SVPB Type (outer diameter, end surface, profile, relief machining)	SDLC-FF Type (without Offset) (External Diameter / Profiling)	SEC-SV Type Profiling Tool Bit, SVJC Type	SDJC Type (External Diameter, Profiling) Holder	SVJB Type (outer diameter, profile machining)	S...SCLC Type (External Diameter/End-Face Machining)	SVLP Type (outer diameter, profile machining)	SCLC Type (External Diameter/End-Face Machining)	SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder	SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)	S...SDLC Type (External Diameter, Copy Machining)	Tool Bit Applicable With DE○○ Insert, Aluminum Alloy Tool Bit for Outer Diameter and Profile Processing	VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit	SEC-Mini Bit, SDNC Type	SEC-Mini Bit, STAC Type	SEC-Mini Bit, STGC Type	SEC-Outer Diameter Bit, SVPC Type	SEC-Outer Diameter Bit, SVVC Type	SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Left)	SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Right)	SEC-SD type copying tool SDJC type	SEC-Mini Tool Bit, Zero Offset Holder, SVJC-X Type	SEC-Mini Tool Bit, SCAC-X Type	SEC-MINI Tool Holder Zero Offset Holder SCLC-X Type (Cutting Direction: Left)	SEC-MINI Tool Holder Zero Offset Holder SCLC-X Type (Cutting Direction: Right)	SEC-Mini Tool Bit, Zero Offset Holder, SDAC-X Type	SEC-Mini Bit Offset 0 Holder SDJC-X Type	SEC-Mini Tool Bit, Zero Offset Holder, SDJC-X Type	SWC-SV type Mini-bite SVLC type	SWC-SV Type Mini Tool Holder SVLC Type (Cutting Direction: Right)	SEC-Mini Tool Bit (11° Positive), SVLP Type	HELI TURN, SLANR/L (for Outer Diameter Machining)	PENTACUT , Toolholder for Parting, Grooving (Shallow Groove), Multifunctional Tool	Holder for Outer Diameter Machining STFCR/L, STGCR/L	Holder for Outer Diameter Machining (Screw Clamp) SCLCR/L	Holder for Outer Diameter Machining (Screw Clamp) SRGCR/L, SRDCN	Holder for Blank Forming (One Corner Usage for Blank Forming)	SCLC-FF Type (without Offset) (External Diameter / End Face Machining)	SDXC Type (External Diameter, End Face, Profiling)	SDNC-F Type (External Diameter, Profiling)	SDNC Type (External Diameter, Profiling)	SDLP-FF Type (without Offset) (External Diameter / Profiling)	STGC (P) Type (Outside Diameter Machining)
From	1,663,657 VND	1,739,394 VND	1,865,295 VND	1,663,657 VND	2,886,466 VND	1,663,657 VND	1,969,949 VND	4,825,924 VND	2,888,826 VND	1,701,821 VND	1,663,657 VND	1,826,934 VND	4,787,761 VND	2,694,258 VND	3,316,034 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	2,886,466 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	2,981,936 VND	3,140,205 VND	1,828,830 VND	1,828,830 VND	2,054,928 VND	3,537,826 VND	1,701,821 VND	1,663,657 VND	1,663,657 VND	1,663,657 VND	1,663,657 VND	1,663,657 VND
Days to ShipSố ngày giao hàng	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	7 Day(s) or more	9 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more
Applicable Tip Shape	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	T (Triangle)	T (Triangle)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	Other	Other	T (Triangle)	C (80° Diamond-Shape)	R (Circular)	Other	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	T (Triangle)
Applicable Chip Clearance Angle	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	-	-	-	-	-	-	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv
Selfishly	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Left-hand	Right-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand	Right-hand / Left-hand	Left-hand	Right-hand	Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand
Application	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter	Outer Diameter	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter
Clamp Shape	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on
Shank height(mm)	-	8 ～ 25	10 ～ 25	-	20 ～ 32	-	-	11 ～ 23	-	10 ～ 25	-	-	-	16 ～ 20	20 ～ 25	10 ～ 20	8 ～ 20	8 ～ 20	10 ～ 25	20 ～ 32	8 ～ 25	8 ～ 25	10 ～ 25	10 ～ 12	10 ～ 12	10 ～ 12	10 ～ 12	10 ～ 12	10 ～ 12	10 ～ 12	10 ～ 25	10 ～ 25	10 ～ 16	20 ～ 32	12 ～ 25	12 ～ 25	8 ～ 25	20	12	8 ～ 18	-	-	-	-	-
Shank width(mm)	-	8 ～ 25	10 ～ 25	-	20 ～ 25	-	-	11 ～ 23	-	10 ～ 25	-	-	-	16 ～ 20	20 ～ 25	10 ～ 20	8 ～ 20	8 ～ 20	10 ～ 25	20 ～ 25	8 ～ 25	8 ～ 25	10 ～ 25	10 ～ 12	10 ～ 15	10 ～ 15	10 ～ 15	10 ～ 15	10 ～ 15	10 ～ 15	10 ～ 25	10 ～ 25	10 ～ 16	20 ～ 32	12 ～ 25	12 ～ 25	8 ～ 25	20	12	8 ～ 16	-	-	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	SVJB-FF Type (not offset) (outer diameter, profile machining)	SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)	SVPB Type (outer diameter, end surface, profile, relief machining)	SDLC-FF Type (without Offset) (External Diameter / Profiling)	SEC-SV Type Profiling Tool Bit, SVJC Type	SDJC Type (External Diameter, Profiling) Holder	SVJB Type (outer diameter, profile machining)	S...SCLC Type (External Diameter/End-Face Machining)	SVLP Type (outer diameter, profile machining)	SCLC Type (External Diameter/End-Face Machining)	SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder	SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)	S...SDLC Type (External Diameter, Copy Machining)	Tool Bit Applicable With DE○○ Insert, Aluminum Alloy Tool Bit for Outer Diameter and Profile Processing	VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit	SEC-Mini Bit, SDNC Type	SEC-Mini Bit, STAC Type	SEC-Mini Bit, STGC Type	SEC-Outer Diameter Bit, SVPC Type	SEC-Outer Diameter Bit, SVVC Type	SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Left)	SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Right)	SEC-SD type copying tool SDJC type	SEC-Mini Tool Bit, Zero Offset Holder, SVJC-X Type	SEC-Mini Tool Bit, SCAC-X Type	SEC-MINI Tool Holder Zero Offset Holder SCLC-X Type (Cutting Direction: Left)	SEC-MINI Tool Holder Zero Offset Holder SCLC-X Type (Cutting Direction: Right)	SEC-Mini Tool Bit, Zero Offset Holder, SDAC-X Type	SEC-Mini Bit Offset 0 Holder SDJC-X Type	SEC-Mini Tool Bit, Zero Offset Holder, SDJC-X Type	SWC-SV type Mini-bite SVLC type	SWC-SV Type Mini Tool Holder SVLC Type (Cutting Direction: Right)	SEC-Mini Tool Bit (11° Positive), SVLP Type	HELI TURN, SLANR/L (for Outer Diameter Machining)	PENTACUT , Toolholder for Parting, Grooving (Shallow Groove), Multifunctional Tool	Holder for Outer Diameter Machining STFCR/L, STGCR/L	Holder for Outer Diameter Machining (Screw Clamp) SCLCR/L	Holder for Outer Diameter Machining (Screw Clamp) SRGCR/L, SRDCN	Holder for Blank Forming (One Corner Usage for Blank Forming)	SCLC-FF Type (without Offset) (External Diameter / End Face Machining)	SDXC Type (External Diameter, End Face, Profiling)	SDNC-F Type (External Diameter, Profiling)	SDNC Type (External Diameter, Profiling)	SDLP-FF Type (without Offset) (External Diameter / Profiling)	STGC (P) Type (Outside Diameter Machining)

Loading...Tải…