Holding Tools for O.D. Tuning（Selfishly：Right-hand）

• You can add up to 6 items per a category to the compare list. Compare

  

  AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)

  KYOCERA

  Back surface clamping type / screw clamping type small tool holder (outer diameter).

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling	Back Surface Clamp	-	-

  From: 1,990,408 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WTJN-N Type (outer diameter, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter / Profiling	Wedge Lock	-	-

  From: 2,255,783 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Screw-on type. General / Profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	8 ～ 25	8 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PTGN Type (Outer Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Lever lock	12 ～ 25	12 ～ 25

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDJC Type (External Diameter, Profiling) Holder

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MVLN Type (External Diameter, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (M)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand	Outer Diameter / Profiling	Double Clamp	-	-

  From: 2,990,924 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PVPN Type (External Diameter, Copying/Undercutting)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand	Outer Diameter / End Face / Profiling	Pin Lock	20 ～ 25	20 ～ 25

  From: 2,293,946 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVJB-FF Type (not offset) (outer diameter, profile machining)

  KYOCERA

  Back surface clamping type / screw clamping type small tool holder (outer diameter).

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	-	-

  From: 19,726,421 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PCLN Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DWLN Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand	Outer Diameter / End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,008,113 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder

  KYOCERA

  [Features]·This is SDJC-FF type[Applications]·For small tools, general turning holders, machining of outer diameter and profiling

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, SDJC-N/SDJC

  NGK SPARK PLUG

  [Features]·By adopting a unique center height adjustment mechanism, you can easily adjust the height of the cutting edge with a single wrench! Reduces the time spent for accuracy!

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	-	-	-	-

  From: 3,285,973 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Bit, ESBN Type

  SUMITOMO ELECTRIC HARDMETAL

  Pin lock type. For General Outer Diameter Cutting

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	Outer Diameter	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit, PTFN Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-70 type tool bit PTFN type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DCLN Type (Outer Diameter Machining / End Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,008,113 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PDJN Type (External Diameter, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand	Outer Diameter / Profiling	Lever lock	16 ～ 32	16 ～ 32

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSSN Type (External Diameter, End Face, Chamfering)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	Outer Diameter / End Face / Chamfer	Lever lock	16 ～ 25	16 ～ 25

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCLC-FF Type (without Offset) (External Diameter / End Face Machining)

  KYOCERA

  [Features]·This is SCLC-FF type[Applications]·For small tools, general turning holders, machining of outer diameter and flange

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / End Face	Screw-on	8 ～ 18	8 ～ 16

  From: 1,701,821 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7; clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Back Surface Clamp	-	-

  From: 1,990,408 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDLC-FF Type (without Offset) (External Diameter / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVJB Type (outer diameter, profile machining)

  KYOCERA

  Back surface clamping type / screw clamping type small tool holder (outer diameter).

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,969,949 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 Type Tool Bit ETAN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Pin lock type. Outer diameter, for general cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SV Type Profiling Tool Bit, SVJC Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-SV type profiling tool bit SVJC type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter	Screw-on	20 ～ 32	20 ～ 25

  From: 2,886,466 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WTKN-N Type (outer diameter, end surface, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter / End Face / Profiling	Wedge Lock	-	-

  From: 2,439,519 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SABS-40F Type (Cutting Edge Width 2.8 mm, Depth 4 mm Max.)

  KYOCERA

  Back surface clamping type / screw clamping type back turning (outer diameter) holder.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand	Post-Grinding	Other	-	-

  From: 2,766,270 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVPB Type (outer diameter, end surface, profile, relief machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / End Face / Profiling	Screw-on	10 ～ 25	10 ～ 25

  From: 1,865,295 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	Outer Diameter	Cable clamp	-	-

  From: 7,817,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, CSDP Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: chamfering; compatible insert shape: S (square); compatible insert relief angle: positive 11° (P); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Pozidriv	Right-hand	Outer Diameter / Chamfer	Clamp-on	19 ～ 25	19 ～ 25

  From: 3,310,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-REX Tool Bit DTR55Q

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ The machining cost is significantly reduced due to the number of cutting edges which is 1.5 times as many as DNMG inserts.・ Strongly clamps the insert with corrugated fitting and double clamp on lock.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand	Outer Diameter / End Face / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,483,584 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, SS Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: S (square); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Pozidriv	Right-hand	Outer Diameter	-	10 ～ 20	10 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Tool Bit DCLN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type. For general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-M Type Tool Bit MTJN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Clamp on + pin lock type. General / Profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter / Profiling	Double Clamp	20 ～ 32	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-M Type Bit, MWLN Type

  SUMITOMO ELECTRIC HARDMETAL

  Clamp-on + pin lock type. General / End Face Cutting

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand	Outer Diameter / End Face	Double Clamp	20 ～ 32	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Tool Bit (11° Positive), SVLP Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit (11° positive) SVLP type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	10 ～ 16	10 ～ 16

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Tool Bit DVJN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type. For general / profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand	Outer Diameter / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-for Solid Sumiboron Bit (dimple lock type), XCLN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face	-	25	25

  From: 4,604,024 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DDJN Type (Outer Diameter Machining / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face	Cable clamp	-	-

  From: 1,969,949 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PDHN Type (External Diameter, End Face, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face / Profiling	Lever lock	-	-

  From: 1,867,852 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSKN Type (End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: flange; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	End Face	Lever lock	-	-

  From: 1,867,852 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PTFN Type (End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	End Face	Lever lock	12 ～ 25	12 ～ 25

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DVLN Type (External Diameter, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand	Outer Diameter / Profiling	Cable clamp	-	-

  From: 1,969,949 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DVPN Type (External Diameter, Profiling/Undercutting)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand	Outer Diameter / End Face / Profiling	Cable clamp	-	-

  From: 2,378,339 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PVLN Type (External Diameter, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand	Outer Diameter / Profiling	Pin Lock	-	-

  From: 2,031,129 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: R (round); compatible insert relief angle: Positive 7 (C), negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative / Pozidriv	Right-hand	Outer Diameter / End Face / Profiling	Lever lock	-	-

  From: 1,867,852 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	KYOCERA	KYOCERA	KYOCERA	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)	WTJN-N Type (outer diameter, profile machining)	SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)	PTGN Type (Outer Diameter Machining)	SDJC Type (External Diameter, Profiling) Holder	MVLN Type (External Diameter, Profiling)	PVPN Type (External Diameter, Copying/Undercutting)	SVJB-FF Type (not offset) (outer diameter, profile machining)	Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP	PCLN Type (External Diameter/End-Face Machining)	DWLN Type (External Diameter/End-Face Machining)	SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder	Holder For Front-Turning, SDJC-N/SDJC	SEC-70 Type Bit, ESBN Type	SEC-70 Type Tool Bit, PTFN Type	DCLN Type (Outer Diameter Machining / End Machining)	PDJN Type (External Diameter, Profiling)	PSSN Type (External Diameter, End Face, Chamfering)	SCLC-FF Type (without Offset) (External Diameter / End Face Machining)	ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)	SDLC-FF Type (without Offset) (External Diameter / Profiling)	SVJB Type (outer diameter, profile machining)	SEC-30 Type Tool Bit ETAN Type (Cutting Direction: Right)	SEC-SV Type Profiling Tool Bit, SVJC Type	WTKN-N Type (outer diameter, end surface, profile machining)	SABS-40F Type (Cutting Edge Width 2.8 mm, Depth 4 mm Max.)	SVPB Type (outer diameter, end surface, profile, relief machining)	Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L	SEC-Outer Diameter Bit, CSDP Type	T-REX Tool Bit DTR55Q	SEC-Mini Bit, SS Type	SEC-D Type Tool Bit DCLN Type (Cutting Direction: Right)	SEC-M Type Tool Bit MTJN Type (Cutting Direction: Right)	SEC-M Type Bit, MWLN Type	SEC-Mini Tool Bit (11° Positive), SVLP Type	SEC-D Type Tool Bit DVJN Type (Cutting Direction: Right)	SEC-for Solid Sumiboron Bit (dimple lock type), XCLN Type	DDJN Type (Outer Diameter Machining / Profiling)	PDHN Type (External Diameter, End Face, Profiling)	PSKN Type (End Face Machining)	PTFN Type (End Face Machining)	DVLN Type (External Diameter, Profiling)	DVPN Type (External Diameter, Profiling/Undercutting)	PVLN Type (External Diameter, Profiling)	PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)
From	1,990,408 VND	2,255,783 VND	1,739,394 VND	1,803,918 VND	1,663,657 VND	2,990,924 VND	2,293,946 VND	1,663,657 VND	19,726,421 VND	1,803,918 VND	2,008,113 VND	1,663,657 VND	3,285,973 VND	1,268,644 VND	1,771,263 VND	2,008,113 VND	1,803,918 VND	1,803,918 VND	1,701,821 VND	1,990,408 VND	1,663,657 VND	1,969,949 VND	1,268,644 VND	2,886,466 VND	2,439,519 VND	2,766,270 VND	1,865,295 VND	7,817,848 VND	3,310,593 VND	2,483,584 VND	1,739,394 VND	1,944,769 VND	2,589,616 VND	2,589,616 VND	1,739,394 VND	2,589,616 VND	4,604,024 VND	1,969,949 VND	1,867,852 VND	1,867,852 VND	1,803,918 VND	1,969,949 VND	2,378,339 VND	2,031,129 VND	1,867,852 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more
Applicable Tip Shape	V (35° Diamond-Shaped)	T (Triangle)	D (55° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	W (Hexagonal Type)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	T (Triangle)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	T (Triangle)	V (35° Diamond-Shaped)	T (Triangle)	Other	V (35° Diamond-Shaped)	S (Rectangular)	S (Rectangular)	Other	S (Rectangular)	C (80° Diamond-Shape)	T (Triangle)	W (Hexagonal Type)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	T (Triangle)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	R (Circular)
Applicable Chip Clearance Angle	Pozidriv	Negative	Pozidriv	Negative	Pozidriv	Negative	Negative	Pozidriv	Pozidriv	Negative	Negative	Pozidriv	-	Negative	Negative	Negative	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Negative	Pozidriv	Negative	-	Pozidriv	Negative	Pozidriv	-	Pozidriv	Negative	Negative	Negative	Pozidriv	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative / Pozidriv
Selfishly	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand
Application	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / Profiling	-	Outer Diameter	End Face	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter	Outer Diameter	Outer Diameter / End Face / Profiling	Post-Grinding	Outer Diameter / End Face / Profiling	Outer Diameter	Outer Diameter / Chamfer	Outer Diameter / End Face / Profiling	Outer Diameter	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face / Profiling	End Face	End Face	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling
Clamp Shape	Back Surface Clamp	Wedge Lock	Screw-on	Lever lock	Screw-on	Double Clamp	Pin Lock	Screw-on	Clamp-on	Lever lock	Cable clamp	Screw-on	-	Pin Lock	Lever lock	Cable clamp	Lever lock	Lever lock	Screw-on	Back Surface Clamp	Screw-on	Screw-on	Pin Lock	Screw-on	Wedge Lock	Other	Screw-on	Cable clamp	Clamp-on	Cable clamp	-	Cable clamp	Double Clamp	Double Clamp	Screw-on	Cable clamp	-	Cable clamp	Lever lock	Lever lock	Lever lock	Cable clamp	Cable clamp	Pin Lock	Lever lock
Shank height(mm)	-	-	8 ～ 25	12 ～ 25	-	-	20 ～ 25	-	-	16 ～ 32	20 ～ 25	-	-	12 ～ 25	16 ～ 32	20 ～ 25	16 ～ 32	16 ～ 25	8 ～ 18	-	-	-	12 ～ 25	20 ～ 32	-	-	10 ～ 25	-	19 ～ 25	20 ～ 25	10 ～ 20	20 ～ 25	20 ～ 32	20 ～ 32	10 ～ 16	20 ～ 25	25	-	-	-	12 ～ 25	-	-	-	-
Shank width(mm)	-	-	8 ～ 25	12 ～ 25	-	-	20 ～ 25	-	-	16 ～ 32	20 ～ 25	-	-	12 ～ 25	16 ～ 32	20 ～ 25	16 ～ 32	16 ～ 25	8 ～ 16	-	-	-	12 ～ 25	20 ～ 25	-	-	10 ～ 25	-	19 ～ 25	20 ～ 25	10 ～ 20	20 ～ 25	20 ～ 25	20 ～ 25	10 ～ 16	20 ～ 25	25	-	-	-	12 ～ 25	-	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	KYOCERA	KYOCERA	KYOCERA	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)	WTJN-N Type (outer diameter, profile machining)	SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)	PTGN Type (Outer Diameter Machining)	SDJC Type (External Diameter, Profiling) Holder	MVLN Type (External Diameter, Profiling)	PVPN Type (External Diameter, Copying/Undercutting)	SVJB-FF Type (not offset) (outer diameter, profile machining)	Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP	PCLN Type (External Diameter/End-Face Machining)	DWLN Type (External Diameter/End-Face Machining)	SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder	Holder For Front-Turning, SDJC-N/SDJC	SEC-70 Type Bit, ESBN Type	SEC-70 Type Tool Bit, PTFN Type	DCLN Type (Outer Diameter Machining / End Machining)	PDJN Type (External Diameter, Profiling)	PSSN Type (External Diameter, End Face, Chamfering)	SCLC-FF Type (without Offset) (External Diameter / End Face Machining)	ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)	SDLC-FF Type (without Offset) (External Diameter / Profiling)	SVJB Type (outer diameter, profile machining)	SEC-30 Type Tool Bit ETAN Type (Cutting Direction: Right)	SEC-SV Type Profiling Tool Bit, SVJC Type	WTKN-N Type (outer diameter, end surface, profile machining)	SABS-40F Type (Cutting Edge Width 2.8 mm, Depth 4 mm Max.)	SVPB Type (outer diameter, end surface, profile, relief machining)	Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L	SEC-Outer Diameter Bit, CSDP Type	T-REX Tool Bit DTR55Q	SEC-Mini Bit, SS Type	SEC-D Type Tool Bit DCLN Type (Cutting Direction: Right)	SEC-M Type Tool Bit MTJN Type (Cutting Direction: Right)	SEC-M Type Bit, MWLN Type	SEC-Mini Tool Bit (11° Positive), SVLP Type	SEC-D Type Tool Bit DVJN Type (Cutting Direction: Right)	SEC-for Solid Sumiboron Bit (dimple lock type), XCLN Type	DDJN Type (Outer Diameter Machining / Profiling)	PDHN Type (External Diameter, End Face, Profiling)	PSKN Type (End Face Machining)	PTFN Type (End Face Machining)	DVLN Type (External Diameter, Profiling)	DVPN Type (External Diameter, Profiling/Undercutting)	PVLN Type (External Diameter, Profiling)	PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)

Loading...Tải…