Holding Tools for O.D. Tuning（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SVUB (C) Type (Outer Diameter and Undercutting Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Left-hand	Outer Diameter / Profiling	Screw-on	17 ～ 23	17 ～ 23

  From: 6,584,597 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PTLN-FF Type (without Offset) (External Diameter, Pull End Face Machining)

  KYOCERA

  Lever lock type negative holder for automatic lathe.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Lever lock	-	-

  From: 1,813,754 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit T-Max P Lever Clamp PCLNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Lever lock	20	20

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  O.D. Drop Head Holder (SER)

  CARMEX

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  -	-	-	-	-	-	-

  From: 5,657,627 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  O.D. Vertical Holder

  CARMEX

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  -	-	-	-	-	16 ～ 25	18 ～ 27.5

  From: 5,383,955 VND
  Days to Ship: Số ngày giao hàng: 23 Day(s)

  23 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  NEW DSI (6-Blade) O.D. Holder

  CARMEX

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  -	-	-	-	-	-	-

  From: 3,513,979 VND
  Days to Ship: Số ngày giao hàng: 23 Day(s)

  23 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDHNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRSNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Profiling / Chamfer	Pin Lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter	Cable clamp	-	-

  From: 7,817,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Double Clamp	-	-

  From: 7,817,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	No-hand	Outer Diameter / Post-Grinding	Cable clamp	16 ～ 40	16 ～ 40

  From: 2,777,823 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, SVJBR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	-	-

  From: 9,530,256 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp, SCLCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	-	-

  From: 6,975,588 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L

  SANDVIK

  Sandvik Outer Diameter Holder Small Lathe Tool Shank Bit QS Holding System Short Bit QS- SVABR/L

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	12	12

  From: 4,739,186 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11

  SANDVIK

  [Features]An outer-diameter turning tool featuring stable insert clamping and excellent repeatability. Produces an unimpeded flow of cutting chips. Requires little space for operation. Features a small number of component parts. For outer-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Clamp-on	12 ～ 16	12 ～ 16

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Clamp-on	8	-

  From: 3,958,685 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik T-Max P Negative Tip Shank Bit

  SANDVIK

  [Features]· The first recommended turning tool for outer diameter roughing and finishing, it has a negative insert and center hole, allowing speedy and accurate indexing.[Applications]· Outer diameter turning/negative insert supported.· Support from rough machining to finish machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  -	-	-	Outer Diameter	Lever lock	-	-

  From: 3,539,968 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Outer Diameter Machining, C31/CCLN

  NGK SPARK PLUG

  [Features]· For CN (diamond 80°) inserts· For outer diameter and end surface machining· Clamp-on type

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	-	-

  From: 3,903,513 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter EXTERNAL TOOL HOLDER

  CARMEX

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  -	-	-	-	-	-	-

  From: 2,220,406 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit Applicable With DE○○ Insert, Aluminum Alloy Tool Bit for Outer Diameter and Profile Processing

  MITSUBISHI MATERIALS

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 20° (E); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	20	20

  From: 3,442,810 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit

  MITSUBISHI MATERIALS

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 15° (D); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	20	20

  From: 3,316,034 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-GD Type Profiling Bit GDE Type

  SUMITOMO ELECTRIC HARDMETAL

  Available with dogbone inserts. For profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	-	25	25

  From: 8,675,333 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for SEC-Solid Sumi Boron FCLN

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	25	25

  From: 3,777,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for SEC-Solid Sumi Boron FN11

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	25	25

  From: 3,777,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for SEC-Solid Sumi Boron FN21

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: Negative 0° (N)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	25	25

  From: 3,777,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, SBT Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: post-pull; compatible insert shape: non-ISO standard; clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand	Post-Grinding	-	10 ～ 20	10 ～ 20

  From: 2,483,584 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, SDNC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling	Screw-on	10 ～ 20	10 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, STAC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	8 ～ 20	8 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, STGC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand / Left-hand	Outer Diameter	Screw-on	8 ～ 20	8 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, CSDP Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: chamfering; compatible insert shape: S (square); compatible insert relief angle: positive 11° (P); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Pozidriv	Right-hand	Outer Diameter / Chamfer	Clamp-on	19 ～ 25	19 ～ 25

  From: 3,310,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, DDHN Type

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type, for outer diameter / profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, DVQN Type

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type, for general purpose, profiling, and necking[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, DVVN Type

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type, for general / profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	No-hand	Outer Diameter / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, ETXN Type

  SUMITOMO ELECTRIC HARDMETAL

  Pin lock type, for general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, MTXN Type

  SUMITOMO ELECTRIC HARDMETAL

  Clamp on and pin lock type, for general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Double Clamp	20 ～ 25	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, PCLN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Lever lock	40	40

  From: 3,310,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, SVPC Type

  SUMITOMO ELECTRIC HARDMETAL

  Screw-on type, for necking[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 25	10 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, SVVC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	No-hand	Outer Diameter / Profiling	Screw-on	20 ～ 32	20 ～ 25

  From: 2,886,466 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wide Bit, SGW Type

  SUMITOMO ELECTRIC HARDMETAL

  High-efficiency roughing of long components is possible. Spring shaped cutting chips are unlikely to become entangled in workpieces or machinery.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand	Outer Diameter	-	12 ～ 16	12 ～ 16

  From: 3,183,316 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-REX Tool Bit DTR55C

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: T (triangle); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand / Left-hand	Outer Diameter / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,483,584 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-REX Tool Bit DTR55Q

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ The machining cost is significantly reduced due to the number of cutting edges which is 1.5 times as many as DNMG inserts.・ Strongly clamps the insert with corrugated fitting and double clamp on lock.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,483,584 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, SS Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: S (square); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Pozidriv	Right-hand / Left-hand	Outer Diameter	-	10 ～ 20	10 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	SANDVIK	CARMEX	CARMEX	CARMEX	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	NGK SPARK PLUG	CARMEX	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL
Product SeriesDòng sản phẩm	S...SVUB (C) Type (Outer Diameter and Undercutting Machining)	PTLN-FF Type (without Offset) (External Diameter, Pull End Face Machining)	Shank Tool Bit T-Max P Lever Clamp PCLNR/L	O.D. Drop Head Holder (SER)	O.D. Vertical Holder	NEW DSI (6-Blade) O.D. Holder	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4	T-Max P Cutting Unit For Turning, C-DDHNR/L	Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRSNR/L	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP	Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L	Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN	Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, SVJBR/L	Sandvik CoroTurn 107, Screw Clamp, SCLCR/L	Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S	Sandvik T-Max P Negative Tip Shank Bit	Holder For Outer Diameter Machining, C31/CCLN	Outer Diameter EXTERNAL TOOL HOLDER	Tool Bit Applicable With DE○○ Insert, Aluminum Alloy Tool Bit for Outer Diameter and Profile Processing	VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit	SEC-GD Type Profiling Bit GDE Type	Tool Bit for SEC-Solid Sumi Boron FCLN	Tool Bit for SEC-Solid Sumi Boron FN11	Tool Bit for SEC-Solid Sumi Boron FN21	SEC-Mini Bit, SBT Type	SEC-Mini Bit, SDNC Type	SEC-Mini Bit, STAC Type	SEC-Mini Bit, STGC Type	SEC-Outer Diameter Bit, CSDP Type	SEC-Outer Diameter Bit, DDHN Type	SEC-Outer Diameter Bit, DVQN Type	SEC-Outer Diameter Bit, DVVN Type	SEC-Outer Diameter Bit, ETXN Type	SEC-Outer Diameter Bit, MTXN Type	SEC-Outer Diameter Bit, PCLN Type	SEC-Outer Diameter Bit, SVPC Type	SEC-Outer Diameter Bit, SVVC Type	SEC-Wide Bit, SGW Type	T-REX Tool Bit DTR55C	T-REX Tool Bit DTR55Q	SEC-Mini Bit, SS Type
From	6,584,597 VND	1,813,754 VND	3,447,280 VND	5,657,627 VND	5,383,955 VND	3,513,979 VND	9,772,263 VND	9,413,108 VND	9,772,263 VND	9,772,263 VND	12,668,141 VND	7,817,848 VND	7,817,848 VND	2,777,823 VND	9,530,256 VND	6,975,588 VND	4,739,186 VND	3,339,521 VND	3,958,685 VND	3,539,968 VND	3,903,513 VND	2,220,406 VND	3,442,810 VND	3,316,034 VND	8,675,333 VND	3,777,015 VND	3,777,015 VND	3,777,015 VND	2,483,584 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	3,310,593 VND	1,944,769 VND	2,589,616 VND	2,589,616 VND	1,268,644 VND	2,589,616 VND	3,310,593 VND	1,739,394 VND	2,886,466 VND	3,183,316 VND	2,483,584 VND	2,483,584 VND	1,739,394 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	4 Day(s)	23 Day(s)	23 Day(s)	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	15 Day(s) or more	4 Day(s) or more	9 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Applicable Tip Shape	V (35° Diamond-Shaped)	T (Triangle)	C (80° Diamond-Shape)	-	-	-	C (80° Diamond-Shape)	D (55° Diamond-Shape)	R (Circular)	C (80° Diamond-Shape)	S (Rectangular)	S (Rectangular)	T (Triangle)	S (Rectangular)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	T (Triangle)	V (35° Diamond-Shaped)	-	C (80° Diamond-Shape)	-	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	Other	C (80° Diamond-Shape)	S (Rectangular)	T (Triangle)	Other	D (55° Diamond-Shape)	T (Triangle)	T (Triangle)	S (Rectangular)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	T (Triangle)	T (Triangle)	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	Other	Other	Other	S (Rectangular)
Applicable Chip Clearance Angle	Pozidriv	Negative	Negative	-	-	-	-	-	-	-	Negative	Negative	Negative	Negative	Pozidriv	Pozidriv	-	Pozidriv	Pozidriv	-	-	-	Pozidriv	Pozidriv	Pozidriv	-	-	-	-	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Negative	Negative	Negative	Negative	Negative	Negative	Pozidriv	Pozidriv	-	-	-	Pozidriv
Selfishly	Left-hand	Right-hand	Right-hand	-	-	-	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Application	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / End Face / Profiling / Chamfer	-	-	-	Outer Diameter	Outer Diameter / Profiling / Chamfer	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter / Profiling / Chamfer	Outer Diameter / Post-Grinding	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / End Face	-	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / End Face	Outer Diameter	Outer Diameter / End Face	Post-Grinding	Outer Diameter / Profiling	Outer Diameter	Outer Diameter	Outer Diameter / Chamfer	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter
Clamp Shape	Screw-on	Lever lock	Lever lock	-	-	-	Clamp-on	-	Clamp-on	Cable clamp	Pin Lock	Cable clamp	Double Clamp	Cable clamp	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Lever lock	Clamp-on	-	Screw-on	Screw-on	-	Clamp-on	Clamp-on	Clamp-on	-	Screw-on	Screw-on	Screw-on	Clamp-on	Cable clamp	Cable clamp	Cable clamp	Pin Lock	Double Clamp	Lever lock	Screw-on	Screw-on	-	Cable clamp	Cable clamp	-
Shank height(mm)	17 ～ 23	-	20	-	16 ～ 25	-	-	-	-	-	-	-	-	16 ～ 40	-	-	12	12 ～ 16	8	-	-	-	20	20	25	25	25	25	10 ～ 20	10 ～ 20	8 ～ 20	8 ～ 20	19 ～ 25	20 ～ 25	20 ～ 25	20 ～ 25	12 ～ 25	20 ～ 25	40	10 ～ 25	20 ～ 32	12 ～ 16	20 ～ 25	20 ～ 25	10 ～ 20
Shank width(mm)	17 ～ 23	-	20	-	18 ～ 27.5	-	-	-	-	-	-	-	-	16 ～ 40	-	-	12	12 ～ 16	-	-	-	-	20	20	25	25	25	25	10 ～ 20	10 ～ 20	8 ～ 20	8 ～ 20	19 ～ 25	20 ～ 25	20 ～ 25	20 ～ 25	12 ～ 25	20 ～ 25	40	10 ～ 25	20 ～ 25	12 ～ 16	20 ～ 25	20 ～ 25	10 ～ 20

Loading...Tải…