Holding Tools for O.D. Tuning（Page5）

• You can add up to 6 items per a category to the compare list. Compare

  

  PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: R (round); compatible insert relief angle: Positive 7 (C), negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative / Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Lever lock	-	-

  From: 1,867,852 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DWLN Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,008,113 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WWLN Type (outer diameter, end surface machining)

  KYOCERA

  Double clamp type / lever lock type / wedge lock type general outer diameter holder.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Wedge Lock	20 ～ 25	20 ～ 25

  From: 3,029,088 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CCLN Type (Outer Diameter Machining / End Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	-	-

  From: 2,031,129 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CDJN Type (Outer Diameter Machining / Profiling / Boring)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 5,420,804 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CELN Type (Outer Diameter Machining / End Machining)

  KYOCERA

  Outer diameter holder for clamp-on type ceramic tools.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	Negative	Left-hand	Outer Diameter / End Face	Clamp-on	-	-

  From: 3,542,132 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CSRN Type (Outer Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 2,031,129 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS-N Type (Outer Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 2,215,062 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CSYN Type (End Machining)

  KYOCERA

  [Specifications]·Machining applications: flange; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Clamp-on	-	-

  From: 2,215,062 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CSSN Type (Outer Diameter Machining / End Machining / Chamfering)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	-	-

  From: 2,031,129 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CSDN Type (Outer Diameter Machining / Chamfering)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	No-hand	Outer Diameter / Chamfer	Clamp-on	-	-

  From: 2,031,129 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CTJN Type (Outer Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 2,031,129 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CTUN Type (End Machining)

  KYOCERA

  [Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Clamp-on	-	-

  From: 2,031,129 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRSN Type (Outer Diameter Machining / End Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: R (round); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	-	-

  From: 2,215,062 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRDN Type (Outer Diameter Machining / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative	No-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 2,215,062 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CCRN-A Type (Outer Diameter Machining)

  KYOCERA

  Holder for clamp-on type solid CBN tools.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CCLN-A Type (Outer Diameter Machining / End Machining)

  KYOCERA

  Holder for clamp-on type solid CBN tools.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRDN-A Type (Outer Diameter Machining / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative	No-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRSN-A Type (Outer Diameter Machining / End Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: R (round); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CSKN-A Type (End Machining)

  KYOCERA

  Holder for clamp-on type solid CBN tools.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	End Face	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CSRN-A Type (Outer Diameter Machining)

  KYOCERA

  Holder for clamp-on type solid CBN tools.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CSDN-A Type (Outer Diameter Machining / Chamfering)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	No-hand	Outer Diameter / Chamfer	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CSSN-A Type (Outer Diameter Machining / End Machining / Chamfering)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CTJN-A Type (Outer Diameter Machining)

  KYOCERA

  Holder for clamp-on type solid CBN tools.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	-

  From: 3,746,327 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRGC-BE Type (External Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Pozidriv	Right-hand	Outer Diameter	Lever lock	-	-

  From: 3,787,245 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBSN Type (Outer Diameter Rounded Chamfering)

  KYOCERA

  Unique curved cutting blade adopted to improve cutting edge strength and reduce cutting resistance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	Negative	Right-hand / Left-hand	Outer Diameter / Chamfer	Clamp-on	-	-

  From: 4,358,912 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AABS-40F Type (Blade Width 2.8 mm / Depth 4 mm MAX)

  KYOCERA

  Back surface clamping type / screw clamping type back turning (outer diameter) holder.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand	Post-Grinding	Back Surface Clamp	-	-

  From: 2,950,006 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AABW-40F Type (Blade Width 4.7 mm / Depth 4 mm MAX)

  KYOCERA

  Back surface clamping type / screw clamping type back turning (outer diameter) holder.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand	Post-Grinding	Back Surface Clamp	-	-

  From: 2,950,006 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SABW-40F Type (Cutting Edge Width 4.7 mm, Depth 4 mm Max.)

  KYOCERA

  Back surface clamping type / screw clamping type back turning (outer diameter) holder.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand	Post-Grinding	Other	-	-

  From: 2,766,270 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  AABW-50F Type (Blade Width 4.7 mm / 1 Path 5 mm MAX)

  KYOCERA

  Back surface clamping type / screw clamping type back turning (outer diameter) holder.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand	Post-Grinding	Back Surface Clamp	-	-

  From: 2,950,006 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SABW-50F Type (Cutting Edge Width 4.7 mm, 1 Pass 5 mm Max.)

  KYOCERA

  Back surface clamping type / screw clamping type back turning (outer diameter) holder.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand	Post-Grinding	Other	-	-

  From: 2,766,270 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVLP Type (outer diameter, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 2,888,826 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7; clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face	Back Surface Clamp	-	-

  From: 1,990,408 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCLC-FF Type (without Offset) (External Diameter / End Face Machining)

  KYOCERA

  [Features]·This is SCLC-FF type[Applications]·For small tools, general turning holders, machining of outer diameter and flange

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face	Screw-on	8 ～ 18	8 ～ 16

  From: 1,701,821 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCLC Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face	Screw-on	10 ～ 25	10 ～ 25

  From: 1,701,821 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7; clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Back Surface Clamp	-	-

  From: 1,990,408 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDXC Type (External Diameter, End Face, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDNC-F Type (External Diameter, Profiling)

  KYOCERA

  Screw clamping type small tool holder (outer diameter).

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDNC Type (External Diameter, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDLP-FF Type (without Offset) (External Diameter / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVJB-FF Type (not offset) (outer diameter, profile machining)

  KYOCERA

  Back surface clamping type / screw clamping type small tool holder (outer diameter).

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVPB Type (outer diameter, end surface, profile, relief machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Screw-on	10 ～ 25	10 ～ 25

  From: 1,865,295 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVJP-FF Type (not offset) (outer diameter, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,929,032 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVLP-FF Type (not offset) (outer diameter, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,826,934 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SDUC Type (External Diameter, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / Profiling	Screw-on	13 ～ 23	13 ～ 23

  From: 5,071,037 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)	DWLN Type (External Diameter/End-Face Machining)	WWLN Type (outer diameter, end surface machining)	CCLN Type (Outer Diameter Machining / End Machining)	CDJN Type (Outer Diameter Machining / Profiling / Boring)	CELN Type (Outer Diameter Machining / End Machining)	CSRN Type (Outer Diameter Machining)	CS-N Type (Outer Diameter Machining)	CSYN Type (End Machining)	CSSN Type (Outer Diameter Machining / End Machining / Chamfering)	CSDN Type (Outer Diameter Machining / Chamfering)	CTJN Type (Outer Diameter Machining)	CTUN Type (End Machining)	CRSN Type (Outer Diameter Machining / End Machining)	CRDN Type (Outer Diameter Machining / Profiling)	CCRN-A Type (Outer Diameter Machining)	CCLN-A Type (Outer Diameter Machining / End Machining)	CRDN-A Type (Outer Diameter Machining / Profiling)	CRSN-A Type (Outer Diameter Machining / End Machining)	CSKN-A Type (End Machining)	CSRN-A Type (Outer Diameter Machining)	CSDN-A Type (Outer Diameter Machining / Chamfering)	CSSN-A Type (Outer Diameter Machining / End Machining / Chamfering)	CTJN-A Type (Outer Diameter Machining)	PRGC-BE Type (External Diameter Machining)	CBSN Type (Outer Diameter Rounded Chamfering)	AABS-40F Type (Blade Width 2.8 mm / Depth 4 mm MAX)	AABW-40F Type (Blade Width 4.7 mm / Depth 4 mm MAX)	SABW-40F Type (Cutting Edge Width 4.7 mm, Depth 4 mm Max.)	AABW-50F Type (Blade Width 4.7 mm / 1 Path 5 mm MAX)	SABW-50F Type (Cutting Edge Width 4.7 mm, 1 Pass 5 mm Max.)	SVLP Type (outer diameter, profile machining)	ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining)	SCLC-FF Type (without Offset) (External Diameter / End Face Machining)	SCLC Type (External Diameter/End-Face Machining)	ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)	SDXC Type (External Diameter, End Face, Profiling)	SDNC-F Type (External Diameter, Profiling)	SDNC Type (External Diameter, Profiling)	SDLP-FF Type (without Offset) (External Diameter / Profiling)	SVJB-FF Type (not offset) (outer diameter, profile machining)	SVPB Type (outer diameter, end surface, profile, relief machining)	SVJP-FF Type (not offset) (outer diameter, profile machining)	SVLP-FF Type (not offset) (outer diameter, profile machining)	S...SDUC Type (External Diameter, Profiling)
From	1,867,852 VND	2,008,113 VND	3,029,088 VND	2,031,129 VND	5,420,804 VND	3,542,132 VND	2,031,129 VND	2,215,062 VND	2,215,062 VND	2,031,129 VND	2,031,129 VND	2,031,129 VND	2,031,129 VND	2,215,062 VND	2,215,062 VND	3,746,327 VND	3,746,327 VND	3,746,327 VND	3,746,327 VND	3,746,327 VND	3,746,327 VND	3,746,327 VND	3,746,327 VND	3,746,327 VND	3,787,245 VND	4,358,912 VND	2,950,006 VND	2,950,006 VND	2,766,270 VND	2,950,006 VND	2,766,270 VND	2,888,826 VND	1,990,408 VND	1,701,821 VND	1,701,821 VND	1,990,408 VND	1,663,657 VND	1,663,657 VND	1,663,657 VND	1,663,657 VND	1,663,657 VND	1,865,295 VND	1,929,032 VND	1,826,934 VND	5,071,037 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	7 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Applicable Tip Shape	R (Circular)	W (Hexagonal Type)	W (Hexagonal Type)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	Other	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	T (Triangle)	T (Triangle)	R (Circular)	R (Circular)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	R (Circular)	R (Circular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	T (Triangle)	R (Circular)	Other	Other	Other	Other	Other	Other	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)
Applicable Chip Clearance Angle	Negative / Pozidriv	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Pozidriv	Negative	-	-	-	-	-	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv
Selfishly	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand
Application	Outer Diameter / End Face / Profiling	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter	Outer Diameter	End Face	Outer Diameter / End Face / Chamfer	Outer Diameter / Chamfer	Outer Diameter	End Face	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	End Face	Outer Diameter	Outer Diameter / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter	Outer Diameter	Outer Diameter / Chamfer	Post-Grinding	Post-Grinding	Post-Grinding	Post-Grinding	Post-Grinding	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling
Clamp Shape	Lever lock	Cable clamp	Wedge Lock	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Lever lock	Clamp-on	Back Surface Clamp	Back Surface Clamp	Other	Back Surface Clamp	Other	Screw-on	Back Surface Clamp	Screw-on	Screw-on	Back Surface Clamp	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on
Shank height(mm)	-	20 ～ 25	20 ～ 25	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	8 ～ 18	10 ～ 25	-	-	-	-	-	-	10 ～ 25	-	-	13 ～ 23
Shank width(mm)	-	20 ～ 25	20 ～ 25	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	8 ～ 16	10 ～ 25	-	-	-	-	-	-	10 ～ 25	-	-	13 ～ 23

Loading...Tải…