Holding Tools for I.D. Tuning（Application：Internal Diameter）

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn XS Insert Bar For Profiling CXS-..R

  SANDVIK

  [Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor groovingFull RR: 2.0 mm

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	4.2 ～ 7.2	Internal Diameter	Right-hand / Left-hand	-	32.3 ～ 52.7	-	4 ～ 7	-	NA

  From: 1,088,618 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Boring Bar (SCLCR)

  EXPOWER

  • Volume Discount

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	-	-	-	-	-

  From: 1,769,352 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  EWN Boring Head Set (For Finishing / Insert Holder Type)

  BIG DAISHOWA SEIKI

  [Features]·A 1 micron vernier is added to the easy-to-read scale of 0.01 mm/⌀.·The pre-balanced design achieves stable machining accuracy.·Back boring can be standardized, expanding the range of use.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 100	Internal Diameter	-	-	-	-	-	-	Available

  From: 14,564,330 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SCLC-A Type Steel Bar (inner diameter, inner end surface machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	10 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	120 ～ 250	7°	8 ～ 25	Up to 4	NA

  From: 2,820,828 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Holder For EWN Boring Head Replacement

  BIG DAISHOWA SEIKI

  [Features]Combining the head and insert holder makes it possible to secure a cutting chip pocket. Designed for improved cutting chip discharge. For EWN head

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	-	Internal Diameter	-	-	-	-	-	-	-

  From: 1,984,305 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SVJP (C) (B)-A Type Steel Bar (Inner Spherical Surface and Interior Edge Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	16 ～ 50	Internal Diameter	Right-hand / Left-hand	Screw-on	150 ～ 300	5°	12 ～ 40	Up to 4	NA

  From: 3,690,775 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Boring Bar (SCLCR)

  EXPOWER

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	-	-	-	-	-

  From: 2,983,493 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  A-SVJP (C) (B)-AE Type Excellent Bar (Inner Spherical Surface and Interior Edge Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	16 ～ 50	Internal Diameter	Right-hand / Left-hand	Screw-on	150 ～ 300	5°	12 ～ 40	～5.5	Available

  From: 4,871,671 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screw Clamp/Boring Bar (SCLCR)

  EXPOWER

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	-	-	-	-	-

  From: 1,715,597 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  EZ Bar EZB-HP Type (Internal Diameter Machining, Long Type)

  KYOCERA

  [Features]· Unique EZ adjustment structure· Easy positioning and high repeatability· Suppresses variation in machining size with high restraint force· Precision-oriented HP type

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	2 ～ 6	Internal Diameter	Right-hand	-	36 ～ 83.1	5°	2 ～ 6	-	NA

  From: 557,871 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A/S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	5 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 250	7°	8 ～ 25	～5.5	Available / NA

  From: 3,483,788 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-STLB (P)-A Type Steel Bar (inner diameter, inner end surface machining) Steel Bar (inner diameter, inner end surface machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 250	11°	6 ～ 25	Up to 4	NA

  From: 2,701,035 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...WWLN08 Type Excellent Bar (Profiling)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	28 ～ 40	Internal Diameter	Right-hand / Left-hand	Wedge Lock	250	-	25 ～ 32	Up to 5	NA

  From: 7,274,895 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Inner Diameter Machining, C-SEXR

  NGK SPARK PLUG

  [Features]· Diamond shape 75° positive· Mogul bar· Minimum machining diameter ø6· Carbide shank (internal lubrication hole included)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	6.0 mm	Internal Diameter	Right-hand / Left-hand	-	90 mm	-	-	-	Available

  From: 7,857,760 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EWN Boring Head Set (For Finishing / Round Bit Type)

  BIG DAISHOWA SEIKI

  [Features]·A series of 3 types that allow you to choose the head suitable for processing.·The micron-adjustable ultra-precision head enables difficult small-diameter boring.·With a full lineup of carbide bit series, it is possible to quickly handle small-diameter deep hole drilling.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	1	Internal Diameter	-	-	-	-	-	-	Available

  From: 18,296,968 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VNB Type (inner diameter machined)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	2 ～ 7	Internal Diameter	Right-hand	-	26.5 ～ 49.8	-	-	-	-

  From: 522,270 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C/E-SCLC-A Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	14 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	120 ～ 300	7°	12 ～ 25	~7	Available

  From: 8,724,118 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A/S-STLB (P)-AE Type A/S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 250	11°	6 ～ 25	Up to 4 ～ ～5.5	Available / NA

  From: 3,193,558 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn XS Insert Bar For Grooving CXS-..G

  SANDVIK

  [Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor groovingGroove width: 1.5 mm

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	4.2 ～ 7.2	Internal Diameter	Right-hand / Left-hand	-	27.3 ～ 57.8	-	4 ～ 7	-	NA

  From: 1,015,173 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SWUB (P)-A Type Steel Bar (Inner Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: W (hexagonal); compatible insert relief angle: positive 5° (B), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	6 ～ 22	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 200	5° / 11°	8 ～ 20	Up to 4	NA

  From: 2,737,958 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 32	Internal Diameter	Right-hand / Left-hand	Screw-on	125 ～ 300	11°	10 ～ 25	15 ~ 40 ～ 37.5 ~ 100	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, S-SSKC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: S (square); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	20 ～ 40	Internal Diameter	Right-hand / Left-hand	Screw-on	200 ～ 350	7°	16 ～ 32	-	NA

  From: 2,907,712 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	14 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	90 ～ 300	11°	10 ～ 25	~7	Available

  From: 8,290,240 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PTUN-○○ Type (Inner Diameter Machining)

  KYOCERA

  [Features]·Lever lock method[Applications]·For boring bar, inner diameter machining

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 50	Internal Diameter	Right-hand / Left-hand	Lever lock	150 ～ 300	-	16 ～ 40	Up to 3	NA

  From: 4,478,038 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PWLN06 Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	20 ～ 32	Internal Diameter	Right-hand / Left-hand	Lever lock	150 ～ 200	-	16 ～ 25	Up to 3	Available

  From: 4,478,038 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BBT/BT Shank CK Boring System MW Boring Head (For Roughing)

  BIG DAISHOWA SEIKI

  [Features]· High efficiency machining with 2 blade small diameter rough boring.· Uses general purpose ø20 shank.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	-	-	ø20 mm	-	-

  From: 6,570,220 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, S-SCLP Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	12 ～ 22	Internal Diameter	Right-hand / Left-hand	Screw-on	125 ～ 250	11°	10 ～ 20	-	NA

  From: 2,759,188 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sumiboron Small Diameter Boring Bite BNBX Type

  SUMITOMO ELECTRIC HARDMETAL

  For general / end face cutting[Features]・ The high-stiffness slit clamp system is ideal for small diameter inner diameter machining.・ BN2000 series for machining hardened steel and BN7000 series for machining sintered alloys are available.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	2.5 ～ 8.5	Internal Diameter	Right-hand	-	40 ～ 80	-	2 ～ 8	-	NA

  From: 3,522,180 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)

  BIG DAISHOWA SEIKI

  [Features]· With excellent dynamic balance, it achieves high-speed processing and stable precision.· Automatic balance compensation.· Accurate φ0.01 mm unit scale ultra-precision head.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	32 ～ 85	Internal Diameter	-	-	-	-	-	-	Available

  From: 23,538,964 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EW Micro Head

  BIG DAISHOWA SEIKI

  [Features]· Microminiaturized, using the popular φ0.01 mm scale adjustment mechanism.· Adjustment with only micro-quill eccentricity preserves high speed capability.· Carbide solid straight shank enables high-rigidity machining.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	15 ～ 18	Internal Diameter	-	-	144 ～ 204	-	14 ～ 16	100 ～ 160	Available

  From: 21,020,650 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; compatible insert relief angle: positive 7° (C); clamp method: non-ISO standard, screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	1 ～ 4	Internal Diameter	Right-hand	-	26.5 ～ 39.8	-	-	-	-

  From: 548,156 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  I.D. Holder (PTFNR)

  EXPOWER

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	-	-	-	-	-

  From: 2,214,449 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC

  SANDVIK

  First choice for large diameter fine boringTool is radially adjustable to cover a wide diameter range with one toolTools are micrometer-precisely adjustable to meet tight machining tolerances

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	19 ～ 136	Internal Diameter	-	Screw-on	-	-	-	-	Available

  From: 33,252,536 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera, Inner Diameter Boring Holder, A-DCLN Type

  KYOCERA

  [Features]·A-DCLN type: This is an inner diameter double clamp holder (strong clamping with a single action). ·Stable machining is achieved with flexible coolant holes. [Applications]·For boring bar, inner diameter, deep flange processing

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	Cable clamp	-	-	-	-	-

  From: 9,130,701 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Inner Diameter Machining, NBH

  NGK SPARK PLUG

  [Features]· A boring bar (mogul bar) can be attached to the inner diameter ø10 and 12 models

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	100 mm ～ 125 mm	-	15.875 mm ～ 25.4 mm	-	-

  From: 4,481,211 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, B-SDQC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	13 ～ 32	Internal Diameter	Right-hand / Left-hand	Screw-on	150 ～ 250	7°	10 ～ 25	-	NA

  From: 5,112,938 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, C-STUP Type/C-STUB Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 25	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 250	5° / 11°	6 ～ 20	-	NA

  From: 6,872,988 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sumi Diamond, Small Diameter Boring Bit DABB-C

  SUMITOMO ELECTRIC HARDMETAL

  3 types are available for all types of machining, from general boring to relief cutting and back turning.[Applications]For blind holes, through holes, and back chamfering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	3 ～ 7	Internal Diameter	Right-hand	-	60 ～ 80	7°	2.5 ～ 6	-	NA

  From: 3,775,835 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sumi Diamond, Small Diameter Boring Bit DABB-N

  SUMITOMO ELECTRIC HARDMETAL

  3 types are available for all types of machining, from general boring to relief cutting and back turning.[Applications]Used for blind holes, through holes, and back chamfering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	3 ～ 7	Internal Diameter	Right-hand	-	60 ～ 80	-	2.5 ～ 6	-	NA

  From: 4,049,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RW Boring Head (for Roughing)

  BIG DAISHOWA SEIKI

  [Features]・ Powerful cutting with 2 balance cuts・ "Complete balance cut" is possible because it has an axial adjustment mechanism・ When there is a large stock removal, the number of machining passes can be reduced by the "step cut method"・ A type for through hole (4 corners of the tip can be used)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	25 ～ 100	Internal Diameter	-	-	-	-	-	-	Available

  From: 3,386,330 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SW Cartridge (E-type for Blind Holes)

  BIG DAISHOWA SEIKI

  [Applications]It can be used for dual contact BBT/BT shanks. [Features]Balance cut and step cut can be supported simply by replacing the standard cartridge.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape) / D (55° Diamond-Shape)	20 ～ 175	Internal Diameter	-	-	-	-	-	-	NA

  From: 6,145,511 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VNBX-S Type (inner diameter machined) [corner R (rε) flathead tolerance]

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: non-ISO standard

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	1 ～ 4	Internal Diameter	Right-hand	-	26.5 ～ 39.8	-	-	-	-

  From: 548,156 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A-SCLP-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	12 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	140 ～ 250	11°	10 ～ 25	～5.5	Available

  From: 3,918,855 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter/Inner Face Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	14 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	90 ～ 300	11°	12 ～ 25	~7	Available

  From: 8,290,240 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C...STXP (B) Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	7.5 ～ 11	Internal Diameter	Right-hand / Left-hand	Screw-on	110 ～ 164	-	6 ～ 10	~7	NA

  From: 7,109,158 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Minimum Processing Diameter φA
Application
Selfishly
Clamp Shape
Overall Length L1
Clearance angle
Shank Diameter φD
Protrusion length (L/D)
Lubrication Hole Y/N

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	EXPOWER	BIG DAISHOWA SEIKI	KYOCERA	BIG DAISHOWA SEIKI	KYOCERA	EXPOWER	KYOCERA	EXPOWER	KYOCERA	KYOCERA	KYOCERA	KYOCERA	NGK SPARK PLUG	BIG DAISHOWA SEIKI	KYOCERA	KYOCERA	KYOCERA	SANDVIK	KYOCERA	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	BIG DAISHOWA SEIKI	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	KYOCERA	EXPOWER	SANDVIK	KYOCERA	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	CoroTurn XS Insert Bar For Profiling CXS-..R	Carbide Boring Bar (SCLCR)	EWN Boring Head Set (For Finishing / Insert Holder Type)	S-SCLC-A Type Steel Bar (inner diameter, inner end surface machining)	Insert Holder For EWN Boring Head Replacement	S-SVJP (C) (B)-A Type Steel Bar (Inner Spherical Surface and Interior Edge Machining)	Carbide Boring Bar (SCLCR)	A-SVJP (C) (B)-AE Type Excellent Bar (Inner Spherical Surface and Interior Edge Machining)	Screw Clamp/Boring Bar (SCLCR)	EZ Bar EZB-HP Type (Internal Diameter Machining, Long Type)	A/S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	S-STLB (P)-A Type Steel Bar (inner diameter, inner end surface machining) Steel Bar (inner diameter, inner end surface machining)	S...WWLN08 Type Excellent Bar (Profiling)	Holder For Inner Diameter Machining, C-SEXR	EWN Boring Head Set (For Finishing / Round Bit Type)	VNB Type (inner diameter machined)	C/E-SCLC-A Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)	A/S-STLB (P)-AE Type A/S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)	CoroTurn XS Insert Bar For Grooving CXS-..G	S-SWUB (P)-A Type Steel Bar (Inner Diameter Machining)	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L	SEC-Boring Bit, S-SSKC Type	E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)	S...PTUN-○○ Type (Inner Diameter Machining)	S...PWLN06 Type (Inner Diameter/Inner End Face Machining)	BBT/BT Shank CK Boring System MW Boring Head (For Roughing)	SEC-Boring Bit, S-SCLP Type	Sumiboron Small Diameter Boring Bite BNBX Type	EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)	EW Micro Head	VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]	I.D. Holder (PTFNR)	CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC	Kyocera, Inner Diameter Boring Holder, A-DCLN Type	Holder For Inner Diameter Machining, NBH	SEC-Boring Bit, B-SDQC Type	SEC-Boring Bit, C-STUP Type/C-STUB Type	Sumi Diamond, Small Diameter Boring Bit DABB-C	Sumi Diamond, Small Diameter Boring Bit DABB-N	RW Boring Head (for Roughing)	SW Cartridge (E-type for Blind Holes)	VNBX-S Type (inner diameter machined) [corner R (rε) flathead tolerance]	A-SCLP-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter/Inner Face Machining)	C...STXP (B) Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)
From	1,088,618 VND	1,769,352 VND	14,564,330 VND	2,820,828 VND	1,984,305 VND	3,690,775 VND	2,983,493 VND	4,871,671 VND	1,715,597 VND	557,871 VND	3,483,788 VND	2,701,035 VND	7,274,895 VND	7,857,760 VND	18,296,968 VND	522,270 VND	8,724,118 VND	3,193,558 VND	1,015,173 VND	2,737,958 VND	4,893,027 VND	2,907,712 VND	8,290,240 VND	4,478,038 VND	4,478,038 VND	6,570,220 VND	2,759,188 VND	3,522,180 VND	23,538,964 VND	21,020,650 VND	548,156 VND	2,214,449 VND	33,252,536 VND	9,130,701 VND	4,481,211 VND	5,112,938 VND	6,872,988 VND	3,775,835 VND	4,049,280 VND	3,386,330 VND	6,145,511 VND	548,156 VND	3,918,855 VND	8,290,240 VND	7,109,158 VND
Days to ShipSố ngày giao hàng	7 Day(s) or more	4 Day(s)	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s)	6 Day(s) or more	4 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	14 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	12 Day(s)	6 Day(s) or more	4 Day(s)	6 Day(s) or more	8 Day(s) or more	14 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s)	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more
Applicable Tip Shape	-	-	T (Triangle)	C (80° Diamond-Shape)	T (Triangle)	V (35° Diamond-Shaped)	-	V (35° Diamond-Shaped)	-	-	C (80° Diamond-Shape)	T (Triangle)	W (Hexagonal Type)	Other	-	-	C (80° Diamond-Shape)	T (Triangle)	-	W (Hexagonal Type)	D (55° Diamond-Shape)	S (Rectangular)	T (Triangle)	T (Triangle)	W (Hexagonal Type)	-	C (80° Diamond-Shape)	W (Hexagonal Type)	T (Triangle)	W (Hexagonal Type)	-	-	T (Triangle)	-	-	D (55° Diamond-Shape)	T (Triangle)	Other	Other	-	C (80° Diamond-Shape) / D (55° Diamond-Shape)	-	C (80° Diamond-Shape)	C (80° Diamond-Shape)	T (Triangle)
Minimum Processing Diameter φA	4.2 ～ 7.2	-	20 ～ 100	10 ～ 27	-	16 ～ 50	-	16 ～ 50	-	2 ～ 6	5 ～ 27	8 ～ 27	28 ～ 40	6.0 mm	1	2 ～ 7	14 ～ 27	8 ～ 27	4.2 ～ 7.2	6 ～ 22	15 ～ 32	20 ～ 40	14 ～ 27	20 ～ 50	20 ～ 32	-	12 ～ 22	2.5 ～ 8.5	32 ～ 85	15 ～ 18	1 ～ 4	-	19 ～ 136	-	-	13 ～ 32	8 ～ 25	3 ～ 7	3 ～ 7	25 ～ 100	20 ～ 175	1 ～ 4	12 ～ 27	14 ～ 27	7.5 ～ 11
Application	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter
Selfishly	Right-hand / Left-hand	-	-	Right-hand / Left-hand	-	Right-hand / Left-hand	-	Right-hand / Left-hand	-	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand	-	-	Right-hand	-	-	-	-	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	-	-	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Clamp Shape	-	-	-	Screw-on	-	Screw-on	-	Screw-on	-	-	Screw-on	Screw-on	Wedge Lock	-	-	-	Screw-on	Screw-on	-	Screw-on	Screw-on	Screw-on	Screw-on	Lever lock	Lever lock	-	Screw-on	-	-	-	-	-	Screw-on	Cable clamp	-	Screw-on	Screw-on	-	-	-	-	-	Screw-on	Screw-on	Screw-on
Overall Length L1	32.3 ～ 52.7	-	-	120 ～ 250	-	150 ～ 300	-	150 ～ 300	-	36 ～ 83.1	100 ～ 250	100 ～ 250	250	90 mm	-	26.5 ～ 49.8	120 ～ 300	100 ～ 250	27.3 ～ 57.8	100 ～ 200	125 ～ 300	200 ～ 350	90 ～ 300	150 ～ 300	150 ～ 200	-	125 ～ 250	40 ～ 80	-	144 ～ 204	26.5 ～ 39.8	-	-	-	100 mm ～ 125 mm	150 ～ 250	100 ～ 250	60 ～ 80	60 ～ 80	-	-	26.5 ～ 39.8	140 ～ 250	90 ～ 300	110 ～ 164
Clearance angle	-	-	-	7°	-	5°	-	5°	-	5°	7°	11°	-	-	-	-	7°	11°	-	5° / 11°	11°	7°	11°	-	-	-	11°	-	-	-	-	-	-	-	-	7°	5° / 11°	7°	-	-	-	-	11°	11°	-
Shank Diameter φD	4 ～ 7	-	-	8 ～ 25	-	12 ～ 40	-	12 ～ 40	-	2 ～ 6	8 ～ 25	6 ～ 25	25 ～ 32	-	-	-	12 ～ 25	6 ～ 25	4 ～ 7	8 ～ 20	10 ～ 25	16 ～ 32	10 ～ 25	16 ～ 40	16 ～ 25	ø20 mm	10 ～ 20	2 ～ 8	-	14 ～ 16	-	-	-	-	15.875 mm ～ 25.4 mm	10 ～ 25	6 ～ 20	2.5 ～ 6	2.5 ～ 6	-	-	-	10 ～ 25	12 ～ 25	6 ～ 10
Protrusion length (L/D)	-	-	-	Up to 4	-	Up to 4	-	～5.5	-	-	～5.5	Up to 4	Up to 5	-	-	-	~7	Up to 4 ～ ～5.5	-	Up to 4	15 ~ 40 ～ 37.5 ~ 100	-	~7	Up to 3	Up to 3	-	-	-	-	100 ～ 160	-	-	-	-	-	-	-	-	-	-	-	-	～5.5	~7	~7
Lubrication Hole Y/N	NA	-	Available	NA	-	NA	-	Available	-	NA	Available / NA	NA	NA	Available	Available	-	Available	Available / NA	NA	NA	Available	NA	Available	NA	Available	-	NA	NA	Available	Available	-	-	Available	-	-	NA	NA	NA	NA	Available	NA	-	Available	Available	NA

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	EXPOWER	BIG DAISHOWA SEIKI	KYOCERA	BIG DAISHOWA SEIKI	KYOCERA	EXPOWER	KYOCERA	EXPOWER	KYOCERA	KYOCERA	KYOCERA	KYOCERA	NGK SPARK PLUG	BIG DAISHOWA SEIKI	KYOCERA	KYOCERA	KYOCERA	SANDVIK	KYOCERA	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	BIG DAISHOWA SEIKI	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	KYOCERA	EXPOWER	SANDVIK	KYOCERA	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	CoroTurn XS Insert Bar For Profiling CXS-..R	Carbide Boring Bar (SCLCR)	EWN Boring Head Set (For Finishing / Insert Holder Type)	S-SCLC-A Type Steel Bar (inner diameter, inner end surface machining)	Insert Holder For EWN Boring Head Replacement	S-SVJP (C) (B)-A Type Steel Bar (Inner Spherical Surface and Interior Edge Machining)	Carbide Boring Bar (SCLCR)	A-SVJP (C) (B)-AE Type Excellent Bar (Inner Spherical Surface and Interior Edge Machining)	Screw Clamp/Boring Bar (SCLCR)	EZ Bar EZB-HP Type (Internal Diameter Machining, Long Type)	A/S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	S-STLB (P)-A Type Steel Bar (inner diameter, inner end surface machining) Steel Bar (inner diameter, inner end surface machining)	S...WWLN08 Type Excellent Bar (Profiling)	Holder For Inner Diameter Machining, C-SEXR	EWN Boring Head Set (For Finishing / Round Bit Type)	VNB Type (inner diameter machined)	C/E-SCLC-A Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)	A/S-STLB (P)-AE Type A/S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)	CoroTurn XS Insert Bar For Grooving CXS-..G	S-SWUB (P)-A Type Steel Bar (Inner Diameter Machining)	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L	SEC-Boring Bit, S-SSKC Type	E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)	S...PTUN-○○ Type (Inner Diameter Machining)	S...PWLN06 Type (Inner Diameter/Inner End Face Machining)	BBT/BT Shank CK Boring System MW Boring Head (For Roughing)	SEC-Boring Bit, S-SCLP Type	Sumiboron Small Diameter Boring Bite BNBX Type	EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)	EW Micro Head	VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]	I.D. Holder (PTFNR)	CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC	Kyocera, Inner Diameter Boring Holder, A-DCLN Type	Holder For Inner Diameter Machining, NBH	SEC-Boring Bit, B-SDQC Type	SEC-Boring Bit, C-STUP Type/C-STUB Type	Sumi Diamond, Small Diameter Boring Bit DABB-C	Sumi Diamond, Small Diameter Boring Bit DABB-N	RW Boring Head (for Roughing)	SW Cartridge (E-type for Blind Holes)	VNBX-S Type (inner diameter machined) [corner R (rε) flathead tolerance]	A-SCLP-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter/Inner Face Machining)	C...STXP (B) Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)

Loading...Tải…