Holding Tools for I.D. Tuning（Application：Internal Diameter Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit Offset 0 Holder, SDPC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	-	Internal Diameter	Right-hand / Left-hand	Screw-on	100	-	10	-	NA

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, Offset 0 Holder, PTXN-X Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	-	Internal Diameter	Right-hand	-	-	-	-	-	-

  From: 5,325,002 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sumi Diamond, Small Diameter Boring Bit DABB-C

  SUMITOMO ELECTRIC HARDMETAL

  3 types are available for all types of machining, from general boring to relief cutting and back turning.[Applications]For blind holes, through holes, and back chamfering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	3 ～ 7	Internal Diameter	Right-hand	-	60 ～ 80	7°	2.5 ～ 6	-	NA

  From: 3,775,835 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sumi Diamond, Small Diameter Boring Bit DABB-N

  SUMITOMO ELECTRIC HARDMETAL

  3 types are available for all types of machining, from general boring to relief cutting and back turning.[Applications]Used for blind holes, through holes, and back chamfering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	3 ～ 7	Internal Diameter	Right-hand	-	60 ～ 80	-	2.5 ～ 6	-	NA

  From: 4,049,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sumiboron Small Diameter Boring Bite BNBX Type

  SUMITOMO ELECTRIC HARDMETAL

  For general / end face cutting[Features]・ The high-stiffness slit clamp system is ideal for small diameter inner diameter machining.・ BN2000 series for machining hardened steel and BN7000 series for machining sintered alloys are available.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	2.5 ～ 8.5	Internal Diameter	Right-hand	-	40 ～ 80	-	2 ～ 8	-	NA

  From: 3,522,180 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sumiboron Small Diameter Boring Bite BNB Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B); clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 22	Internal Diameter	Right-hand	-	140 ～ 180	-	8 ～ 20	-	NA

  From: 4,999,893 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Boring Bit Model CKB (Holder)

  SUMITOMO ELECTRIC HARDMETAL

  Automatic lathes can be supported. High indexing precision. Insert replacement operation is simple.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand	-	125 ～ 150	-	-	-	NA

  From: 2,780,434 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Boring Bit Model CKB (Square Shank)

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Available with various automatic lathes.・ High index accuracy due to unique shape.・ Easy insert replacement.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand	-	100 ～ 125	-	-	-	NA

  From: 2,076,375 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Boring Bit Model CKB (Circular Shank)

  SUMITOMO ELECTRIC HARDMETAL

  Compatible with automatic lathes. High-index accuracy. Easy operation for tip replacement.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	-	Internal Diameter	-	-	80 ～ 125	-	10 ～ 20	-	NA

  From: 4,073,865 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Boring Bit Model CKB (Circular Shank Offset Small)

  SUMITOMO ELECTRIC HARDMETAL

  Automatic lathes can be supported. High indexing precision. Insert replacement operation is simple.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	-	Internal Diameter	-	-	100 ～ 125	-	19.05 ～ 25.4	-	NA

  From: 4,582,779 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BSA CoroBore Boring Head

  MANYO TOOLS

  [Features]· A rough machining boring head used with a square bit mounted

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	50 ～ 130	Internal Diameter	-	-	-	-	16 ～ 42	-	-

  From: 4,807,826 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BSB CoroBore Boring Head

  MANYO TOOLS

  [Features]· A rough machining boring head used with a square bit mounted

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	50 ～ 130	Internal Diameter	-	-	-	-	16 ～ 42	-	-

  From: 4,807,826 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TBS Throw-away Square Bit Back Boring

  MANYO TOOLS

  [Features]· Use inserts from cutting tool manufacturers

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	-	Internal Diameter	-	Screw-on	80 ～ 140	-	-	-	-

  From: 3,158,726 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, C-SWUB Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	5.5	Internal Diameter	Right-hand / Left-hand	Screw-on	100	5°	5 ～ 8	-	NA

  From: 7,665,275 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)

  BIG DAISHOWA SEIKI

  [Features]· With excellent dynamic balance, it achieves high-speed processing and stable precision.· Automatic balance compensation.· Accurate φ0.01 mm unit scale ultra-precision head.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	32 ～ 85	Internal Diameter	-	-	-	-	-	-	Available

  From: 23,538,964 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RW Cartridge (for Through Holes) Cartridge Body

  BIG DAISHOWA SEIKI

  Well-balanced cut using 2 sheets enables heavy-duty cutting. 4 corners of the insert can be used. For roughing (for through holes).

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	25 ～ 125	Internal Diameter	-	-	-	-	-	-	NA

  From: 2,919,096 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SW Cartridge (E-type for Blind Holes)

  BIG DAISHOWA SEIKI

  [Applications]It can be used for dual contact BBT/BT shanks. [Features]Balance cut and step cut can be supported simply by replacing the standard cartridge.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape) / D (55° Diamond-Shape)	20 ～ 175	Internal Diameter	-	-	-	-	-	-	NA

  From: 6,145,511 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TW Cartridge (E-type for Blind Holes)

  BIG DAISHOWA SEIKI

  [Features]A boring head TW cartridge, type E for blind holes.2 corners of 80-degree diamond inserts can be used.Please check the compatibility before ordering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	25	Internal Diameter	-	-	-	-	-	-	NA

  From: 4,441,140 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; compatible insert relief angle: positive 7° (C); clamp method: non-ISO standard, screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	1 ～ 4	Internal Diameter	Right-hand	-	26.5 ～ 39.8	-	-	-	-

  From: 548,156 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A-SCLP-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	12 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	140 ～ 250	11°	10 ～ 25	～5.5	Available

  From: 3,918,855 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter/Inner Face Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	14 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	90 ～ 300	11°	12 ～ 25	~7	Available

  From: 8,290,240 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C...SJLC Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: non-ISO standard; compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	5.5	Internal Diameter	Right-hand / Left-hand	Screw-on	91	-	4	~7	NA

  From: 6,839,831 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C...STXP (B) Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	7.5 ～ 11	Internal Diameter	Right-hand / Left-hand	Screw-on	110 ～ 164	-	6 ～ 10	~7	NA

  From: 7,109,158 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  E (C)-SWUB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: W (hexagonal); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	14 ～ 22	Internal Diameter	Right-hand / Left-hand	Screw-on	90 ～ 250	11°	12 ～ 20	~7	Available

  From: 8,290,240 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SSKP Type (Inner Diameter Machining)

  KYOCERA

  Screw clamping type/clamp-on type boring bar.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	20	Internal Diameter	Right-hand	Screw-on	180	-	16	Up to 3	NA

  From: 2,551,315 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...CSKP Type (Inner Diameter Machining)

  KYOCERA

  Screw clamping type/clamp-on type boring bar.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	20 ～ 27	Internal Diameter	Right-hand	Clamp-on	160 ～ 180	-	16 ～ 20	Up to 3	NA

  From: 2,696,338 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SRCP-B Type (inner diameter machined)

  KYOCERA

  Inner diameter holder for screw clamp method/clamp-on method bearings.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  R (Circular)	20 ～ 32	Internal Diameter	Right-hand / Left-hand	Screw-on	125 ～ 150	-	-	-	NA

  From: 4,167,278 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PCLN-○○ Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  [Features]·Lever lock method[Applications]·For boring bar, inner diameter, deep flange processing

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20 ～ 50	Internal Diameter	Right-hand / Left-hand	Lever lock	150 ～ 300	-	16 ～ 40	Up to 3	NA

  From: 4,478,038 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A...PCLN09 Type (Inner Diameter / Back End Surface Machining: with Cutting Fluid Hole) Twin Hole Bar

  KYOCERA

  ·Boring bar for negative inserts, for CN inserts.[Features]·Inner Diameter / Deep End Face Processing·Lever lock

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20	Internal Diameter	Right-hand	Lever lock	150	-	16	Up to 3	Available

  From: 5,265,301 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A...PTUN11 Type Twin Hole Bar (Inner Diameter Machining: with Cutting Fluid Hole)

  KYOCERA

  ·Boring bar for negative inserts, for TN inserts.[Features]·Internal diameter machining·Lever lock

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20	Internal Diameter	Right-hand	Lever lock	150	-	16	Up to 3	Available

  From: 5,265,301 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PWLN06 Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	20 ～ 32	Internal Diameter	Right-hand / Left-hand	Lever lock	150 ～ 200	-	16 ～ 25	Up to 3	Available

  From: 4,478,038 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A...PWLN06 Type Twin Hole Bar (Inner Diameter / Back End Surface Machining: with Cutting Fluid Hole)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	20 ～ 32	Internal Diameter	Right-hand	Lever lock	150 ～ 200	-	16 ～ 25	Up to 3	Available

  From: 5,265,301 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PWLN08 Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  Lever lock type / wedge lock type boring bar.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	40	Internal Diameter	Right-hand / Left-hand	Lever lock	250	-	32	Up to 3	NA

  From: 7,212,743 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...WWLN08 Type Excellent Bar (Profiling)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	28 ～ 40	Internal Diameter	Right-hand / Left-hand	Wedge Lock	250	-	25 ～ 32	Up to 5	NA

  From: 7,274,895 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...CELN Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: E (75° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	50	Internal Diameter	Right-hand	Clamp-on	300	-	40	Up to 3	NA

  From: 8,600,815 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...CTUN-A Type (Inner Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	30	Internal Diameter	Right-hand	Clamp-on	220	-	25	-	-

  From: 6,280,460 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge for T-Max P Negative Tip

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	50 ～ 70	Internal Diameter	Right-hand / Left-hand	Lever lock	58 ～ 73.7	-	-	-	NA

  From: 5,573,567 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max U Fine Boring Unit

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand / Left-hand	-	24.1 ～ 33.8	-	16 ～ 20	-	NA

  From: 15,718,877 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Adapter for Small Lathe

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand	-	-	-	-	-	-

  From: 4,856,063 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Boring Bit for Positive Tips

  SANDVIK

  For inner and outer diameter turning of slender partsHigh repeatability insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20	Internal Diameter	Left-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: 4,670,909 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Carbide Boring Bit for Positive Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5 ～ 25	Internal Diameter	Right-hand / Left-hand	Screw-on	80 ～ 250	7°	6 ～ 20	9 ~ 24 ～ 80	Available

  From: 4,380,354 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Carbide Vibration-proof Boring Bit for Positive Tips

  SANDVIK

  For inner and outer diameter turning of slender partsHigh repeatability insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	18	Internal Diameter	Left-hand	Screw-on	150 ～ 180	7°	12	120	NA

  From: 19,726,421 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	25 ～ 50	Internal Diameter	Right-hand / Left-hand	-	32 ～ 55	-	-	-	NA

  From: 5,573,567 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Solid Carbide Boring Tool Bit MB-A

  SANDVIK

  [Features]Holder for inner-diameter turning (bore cutting) of small parts. The EasyFix sleeve makes center-height alignment easy and ensures excellent rigidity. Switch out the insert to use for grooving, threading, turning, profiling and face grooving operations. Minimum machining diameter: ø10 mm. For small inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	100	-	-	-	-

  From: 4,626,580 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Solid-Carbide Boring Tool Bit MB-E

  SANDVIK

  [Features]Holder for inner-diameter turning (bore cutting) of small parts. The EasyFix sleeve makes center-height alignment easy and ensures excellent rigidity. Switch out the insert to use for grooving, threading, turning, profiling and face grooving operations. Minimum machining diameter: ø10 mm. For small inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	-	-	87.9 ～ 124.7	-	-	-	-

  From: 7,918,137 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Minimum Processing Diameter φA
Application
Selfishly
Clamp Shape
Overall Length L1
Clearance angle
Shank Diameter φD
Protrusion length (L/D)
Lubrication Hole Y/N

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	MANYO TOOLS	MANYO TOOLS	MANYO TOOLS	SUMITOMO ELECTRIC HARDMETAL	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	SEC-Mini Bit Offset 0 Holder, SDPC-X Type	SEC-Mini Bit, Offset 0 Holder, PTXN-X Type	Sumi Diamond, Small Diameter Boring Bit DABB-C	Sumi Diamond, Small Diameter Boring Bit DABB-N	Sumiboron Small Diameter Boring Bite BNBX Type	Sumiboron Small Diameter Boring Bite BNB Type	Micro Boring Bit Model CKB (Holder)	Micro Boring Bit Model CKB (Square Shank)	Micro Boring Bit Model CKB (Circular Shank)	Micro Boring Bit Model CKB (Circular Shank Offset Small)	BSA CoroBore Boring Head	BSB CoroBore Boring Head	TBS Throw-away Square Bit Back Boring	SEC-Boring Bit, C-SWUB Type	EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)	RW Cartridge (for Through Holes) Cartridge Body	SW Cartridge (E-type for Blind Holes)	TW Cartridge (E-type for Blind Holes)	VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]	A-SCLP-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter/Inner Face Machining)	C...SJLC Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)	C...STXP (B) Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)	E (C)-SWUB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter Machining)	S...SSKP Type (Inner Diameter Machining)	S...CSKP Type (Inner Diameter Machining)	SRCP-B Type (inner diameter machined)	S...PCLN-○○ Type (Inner Diameter/Inner End Face Machining)	A...PCLN09 Type (Inner Diameter / Back End Surface Machining: with Cutting Fluid Hole) Twin Hole Bar	A...PTUN11 Type Twin Hole Bar (Inner Diameter Machining: with Cutting Fluid Hole)	S...PWLN06 Type (Inner Diameter/Inner End Face Machining)	A...PWLN06 Type Twin Hole Bar (Inner Diameter / Back End Surface Machining: with Cutting Fluid Hole)	S...PWLN08 Type (Inner Diameter/Inner End Face Machining)	S...WWLN08 Type Excellent Bar (Profiling)	S...CELN Type (Inner Diameter/Inner End Face Machining)	S...CTUN-A Type (Inner Diameter Machining)	Cartridge for T-Max P Negative Tip	T-Max U Fine Boring Unit	CoroCut MB Adapter for Small Lathe	CORO-TURN 107 Boring Bit for Positive Tips	CORO-TURN 107 Carbide Boring Bit for Positive Tips	CORO-TURN 107 Carbide Vibration-proof Boring Bit for Positive Tips	Cartridge	CoroCut MB Solid Carbide Boring Tool Bit MB-A	CoroCut MB Solid-Carbide Boring Tool Bit MB-E
From	1,739,394 VND	5,325,002 VND	3,775,835 VND	4,049,280 VND	3,522,180 VND	4,999,893 VND	2,780,434 VND	2,076,375 VND	4,073,865 VND	4,582,779 VND	4,807,826 VND	4,807,826 VND	3,158,726 VND	7,665,275 VND	23,538,964 VND	2,919,096 VND	6,145,511 VND	4,441,140 VND	548,156 VND	3,918,855 VND	8,290,240 VND	6,839,831 VND	7,109,158 VND	8,290,240 VND	2,551,315 VND	2,696,338 VND	4,167,278 VND	4,478,038 VND	5,265,301 VND	5,265,301 VND	4,478,038 VND	5,265,301 VND	7,212,743 VND	7,274,895 VND	8,600,815 VND	6,280,460 VND	5,573,567 VND	15,718,877 VND	4,856,063 VND	4,670,909 VND	4,380,354 VND	19,726,421 VND	5,573,567 VND	4,626,580 VND	7,918,137 VND
Days to ShipSố ngày giao hàng	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	10 Day(s) or more	10 Day(s) or more	11 Day(s) or more	7 Day(s) or more	10 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	8 Day(s) or more	9 Day(s) or more	10 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	9 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s)	8 Day(s) or more
Applicable Tip Shape	D (55° Diamond-Shape)	T (Triangle)	Other	Other	W (Hexagonal Type)	T (Triangle)	-	-	Other	Other	-	-	S (Rectangular)	W (Hexagonal Type)	T (Triangle)	S (Rectangular)	C (80° Diamond-Shape) / D (55° Diamond-Shape)	C (80° Diamond-Shape)	-	C (80° Diamond-Shape)	C (80° Diamond-Shape)	Other	T (Triangle)	W (Hexagonal Type)	S (Rectangular)	S (Rectangular)	R (Circular)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	T (Triangle)	W (Hexagonal Type)	W (Hexagonal Type)	W (Hexagonal Type)	W (Hexagonal Type)	C (80° Diamond-Shape)	T (Triangle)	S (Rectangular)	-	-	C (80° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	-	-
Minimum Processing Diameter φA	-	-	3 ～ 7	3 ～ 7	2.5 ～ 8.5	10 ～ 22	-	-	-	-	50 ～ 130	50 ～ 130	-	5.5	32 ～ 85	25 ～ 125	20 ～ 175	25	1 ～ 4	12 ～ 27	14 ～ 27	5.5	7.5 ～ 11	14 ～ 22	20	20 ～ 27	20 ～ 32	20 ～ 50	20	20	20 ～ 32	20 ～ 32	40	28 ～ 40	50	30	50 ～ 70	-	-	20	8.5 ～ 25	18	25 ～ 50	-	-
Application	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter
Selfishly	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	-	-	-	-	-	Right-hand / Left-hand	-	-	-	-	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	-	-
Clamp Shape	Screw-on	-	-	-	-	-	-	-	-	-	-	-	Screw-on	Screw-on	-	-	-	-	-	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Clamp-on	Screw-on	Lever lock	Lever lock	Lever lock	Lever lock	Lever lock	Lever lock	Wedge Lock	Clamp-on	Clamp-on	Lever lock	-	-	Screw-on	Screw-on	Screw-on	-	-	-
Overall Length L1	100	-	60 ～ 80	60 ～ 80	40 ～ 80	140 ～ 180	125 ～ 150	100 ～ 125	80 ～ 125	100 ～ 125	-	-	80 ～ 140	100	-	-	-	-	26.5 ～ 39.8	140 ～ 250	90 ～ 300	91	110 ～ 164	90 ～ 250	180	160 ～ 180	125 ～ 150	150 ～ 300	150	150	150 ～ 200	150 ～ 200	250	250	300	220	58 ～ 73.7	24.1 ～ 33.8	-	200	80 ～ 250	150 ～ 180	32 ～ 55	100	87.9 ～ 124.7
Clearance angle	-	-	7°	-	-	-	-	-	-	-	-	-	-	5°	-	-	-	-	-	11°	11°	-	-	11°	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	7°	7°	7°	-	-	-
Shank Diameter φD	10	-	2.5 ～ 6	2.5 ～ 6	2 ～ 8	8 ～ 20	-	-	10 ～ 20	19.05 ～ 25.4	16 ～ 42	16 ～ 42	-	5 ～ 8	-	-	-	-	-	10 ～ 25	12 ～ 25	4	6 ～ 10	12 ～ 20	16	16 ～ 20	-	16 ～ 40	16	16	16 ～ 25	16 ～ 25	32	25 ～ 32	40	25	-	16 ～ 20	-	16	6 ～ 20	12	-	-	-
Protrusion length (L/D)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	～5.5	~7	~7	~7	~7	Up to 3	Up to 3	-	Up to 3	Up to 3	Up to 3	Up to 3	Up to 3	Up to 3	Up to 5	Up to 3	-	-	-	-	24 ~ 64	9 ~ 24 ～ 80	120	-	-	-
Lubrication Hole Y/N	NA	-	NA	NA	NA	NA	NA	NA	NA	NA	-	-	-	NA	Available	NA	NA	NA	-	Available	Available	NA	NA	Available	NA	NA	NA	NA	Available	Available	Available	Available	NA	NA	NA	-	NA	NA	-	Available	Available	NA	NA	-	-

Loading...Tải…