Holding Tools for I.D. Tuning（Applicable Tip Shape：T (Triangle)）

• You can add up to 6 items per a category to the compare list. Compare

  

  EWN Boring Head Set (For Finishing / Insert Holder Type)

  BIG DAISHOWA SEIKI

  [Features]·A 1 micron vernier is added to the easy-to-read scale of 0.01 mm/⌀.·The pre-balanced design achieves stable machining accuracy.·Back boring can be standardized, expanding the range of use.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 100	Internal Diameter	-	-	-	-	-	-	Available

  From: 14,564,330 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Holder For EWN Boring Head Replacement

  BIG DAISHOWA SEIKI

  [Features]Combining the head and insert holder makes it possible to secure a cutting chip pocket. Designed for improved cutting chip discharge. For EWN head

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	-	Internal Diameter	-	-	-	-	-	-	-

  From: 1,984,305 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC

  SANDVIK

  First choice for large diameter fine boringTool is radially adjustable to cover a wide diameter range with one toolTools are micrometer-precisely adjustable to meet tight machining tolerances

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	19 ～ 136	Internal Diameter	-	Screw-on	-	-	-	-	Available

  From: 33,252,536 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-STLB (P)-A Type Steel Bar (inner diameter, inner end surface machining) Steel Bar (inner diameter, inner end surface machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 250	11°	6 ～ 25	Up to 4	NA

  From: 2,701,035 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	14 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	90 ～ 300	11°	10 ～ 25	~7	Available

  From: 8,290,240 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)

  BIG DAISHOWA SEIKI

  [Features]· With excellent dynamic balance, it achieves high-speed processing and stable precision.· Automatic balance compensation.· Accurate φ0.01 mm unit scale ultra-precision head.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	32 ～ 85	Internal Diameter	-	-	-	-	-	-	Available

  From: 23,538,964 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PTUN-○○ Type (Inner Diameter Machining)

  KYOCERA

  [Features]·Lever lock method[Applications]·For boring bar, inner diameter machining

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 50	Internal Diameter	Right-hand / Left-hand	Lever lock	150 ～ 300	-	16 ～ 40	Up to 3	NA

  From: 4,478,038 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 107, Boring Tool Bit for Turning

  SANDVIK

  [Features]·Inner diameter boring tool bit with low cutting force·The internal coolant ensures longer insert lifespan and good cutting chip handling·High tool rigidity ensures stable machining operations even with workpieces with long protrusions[Applications]·For inner diameter turning operations

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	11	Internal Diameter	Left-hand	Screw-on	125	7°	10	15 ~ 40	NA

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  A/S-STLB (P)-AE Type A/S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 27	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 250	11°	6 ～ 25	Up to 4 ～ ～5.5	Available / NA

  From: 3,193,558 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, Offset 0 Holder, PTXN-X Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	-	Internal Diameter	Right-hand	-	-	-	-	-	-

  From: 5,325,002 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, S-STUB Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8	Internal Diameter	Right-hand / Left-hand	Screw-on	100	5°	8	-	NA

  From: 2,737,943 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C...STXP (B) Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	7.5 ～ 11	Internal Diameter	Right-hand / Left-hand	Screw-on	110 ～ 164	-	6 ～ 10	~7	NA

  From: 7,109,158 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C...STZB Type Carbide Anti-vibration Bar (Boring)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5	Inner diameter profiling	Right-hand / Left-hand	Screw-on	110	-	6	~7	NA

  From: 7,109,158 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	11 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	100 ～ 300	7°	8 ～ 40	9 ~ 24 ～ 60 ~ 160	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  (Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)

  SANDVIK

  [Features]Inner diameter boring tool bit with low cutting force. The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions. For inner diameter turning operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	11	Internal Diameter	Right-hand	Screw-on	125	7°	10	15 ~ 40	NA

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  High Speed Fine Boring Head

  SANDVIK

  HSK fine boring head adapterFlexible solution for a wide diameter range

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	3	Internal Diameter	-	-	-	-	12	-	Available

  From: 40,966,745 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, B-STUP Type

  SUMITOMO ELECTRIC HARDMETAL

  Steel shank type with anti-vibration mechanism.Screw-on type.For inner diameter, through hole / flange, blind hole machining.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 40	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 300	11°	8 ～ 32	-	NA

  From: 4,391,961 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, C-STUP Type/C-STUB Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 25	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 250	5° / 11°	6 ～ 20	-	NA

  From: 6,872,988 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, D-STUP Type (vibration resistant)

  SUMITOMO ELECTRIC HARDMETAL

  Steel shank type with lubrication hole and anti-vibration mechanism. Screw-on type. For blind hole machining

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	14 ～ 22	Internal Diameter	Right-hand / Left-hand	Screw-on	150 ～ 250	11°	12 ～ 20	-	Available

  From: 6,639,679 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, E-STUP Type

  SUMITOMO ELECTRIC HARDMETAL

  Carbide shank type with lubrication hole.Screw-on type.For inner diameter, through hole / flange, blind hole machining.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 20	Internal Diameter	Right-hand	Screw-on	100 ～ 200	11°	8 ～ 16	-	Available

  From: 8,590,390 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, S-CTFP Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P; clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	16 ～ 32	Internal Diameter	Right-hand / Left-hand	Clamp-on	150 ～ 250	11°	12 ～ 25	-	NA

  From: 2,843,974 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, S-DTR55C Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: non-ISO standard; clamp method: double clamp (D)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	44 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand	Cable clamp	250 ～ 300	-	32 ～ 40	-	NA

  From: 8,781,365 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit/Sumiboron Small Diameter Boring Bit S-ETFN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	34 ～ 44	Internal Diameter	Right-hand	Other	200 ～ 250	0°	25 ～ 32	-	NA

  From: 4,752,548 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, S-STUP Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 28	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 300	11°	8 ～ 25	-	NA

  From: 2,759,188 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sumiboron Small Diameter Boring Bite BNB Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B); clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 22	Internal Diameter	Right-hand	-	140 ～ 180	-	8 ～ 20	-	NA

  From: 4,999,893 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TBS Throw-away Square Bit

  MANYO TOOLS

  [Features]· Use inserts from cutting tool manufacturers

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	-	Internal Diameter	-	Screw-on	80 ～ 150	-	-	-	-

  From: 2,608,895 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In)

  BIG DAISHOWA SEIKI

  [Features]· The internal weight can be adjusted manually by turning the balance ring.· Manual balance adjustment mechanism. 5 μm/φ scale precision diameter adjustment mechanism (EWB2-50 only).

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	1	Internal Diameter	-	-	-	-	50 ～ 63.5	-	Available

  From: 31,229,458 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 22	Internal Diameter	Right-hand / Left-hand	Screw-on	120 ～ 200	-	8 ～ 20	～5.5	Available

  From: 3,752,928 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-STLC-A Type Steel Bar (inner diameter, inner end surface machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 22	Internal Diameter	Right-hand / Left-hand	Screw-on	120 ～ 200	-	8 ～ 20	Up to 4	NA

  From: 2,779,206 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...STWP-E Type Excellent Bar (Profiling)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 25	Inner diameter profiling	Left-hand	Screw-on	200 ～ 220	-	16 ～ 20	Up to 3	NA

  From: 4,208,711 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...CTUP Type (Inner Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P; clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	27 ～ 50	Internal Diameter	Right-hand / Left-hand	Clamp-on	180 ～ 315	-	20 ～ 40	Up to 3	NA

  From: 3,649,340 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A...PTUN11 Type Twin Hole Bar (Inner Diameter Machining: with Cutting Fluid Hole)

  KYOCERA

  ·Boring bar for negative inserts, for TN inserts.[Features]·Internal diameter machining·Lever lock

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20	Internal Diameter	Right-hand	Lever lock	150	-	16	Up to 3	Available

  From: 5,265,301 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...CTUN-A Type (Inner Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	30	Internal Diameter	Right-hand	Clamp-on	220	-	25	-	-

  From: 6,280,460 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Carbide Boring Bit for Positive Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5 ～ 25	Internal Diameter	Right-hand / Left-hand	Screw-on	80 ～ 250	7°	6 ～ 20	9 ~ 24 ～ 80	Available

  From: 4,380,354 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 111, Boring Tool Bit for Turning

  SANDVIK

  [Features]·Inner diameter boring tool bit with low cutting force·The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions·Easy-fix sleeve for quick and accurate core height adjustment[Applications]·For inner diameter turning operations

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 32	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	125 ～ 300	11°	8 ～ 25	12 ~ 32 ～ 37.5 ~ 100	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	80 ～ 200	11°	6 ～ 16	9 ~ 24 ～ 32	Available

  From: 4,335,541 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR/L-R

  SANDVIK

  [Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but...Readmore

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	13 ～ 16	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 180	11°	10 ～ 12	72 ~ 120 ～ 120	NA

  From: 18,461,603 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit T-Max P Lever Clamp S...PTFNR/L

  SANDVIK

  T-Max P Turning Boring Bar for High Productivity, High Efficiency, and High Quality Machining

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 32	Internal Diameter	Right-hand / Left-hand	Lever lock	200 ～ 300	-	16 ～ 25	64 ～ 100	Available

  From: 8,105,854 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 200	7°	6 ～ 16	36 ～ 64	Available

  From: 6,979,550 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR/L

  SANDVIK

  [Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but...Readmore

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	13 ～ 16	Internal Diameter	Right-hand / Left-hand	Screw-on	-	7°	10 ～ 12	60～100 ～ 120	-

  From: 18,461,603 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-STFCL

  SANDVIK

  [Features]An interchangeable-head-type cutting head for inner-diameter turning. The low cutting resistance ensures stable machining operations. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	40 ～ 50	Internal Diameter	Left-hand	Screw-on	-	-	32 ～ 40	32	Available

  From: 10,269,696 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Boring Tool Bit For Turning, CTFPR/L

  SANDVIK

  T-Max S Turning Boring Bits for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	-	Internal Diameter	Right-hand	Clamp-on	400	-	40	80/160	-

  From: 9,572,397 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Boring Tool Bit For Turning S..CTFPR/L

  SANDVIK

  A boring tool bit for turning that achieves high productivity, high quality, and high efficiency

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 mm ～ 32 mm	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Clamp-on	200 mm ～ 300 mm	11°	16 mm ～ 25 mm	32.5 – 64 mm ～ 49 – 100 mm	NA

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge - Round Shank Boring Tool Bit For Positive Inserts, R/L140

  SANDVIK

  Cartridge for CoroTurn 107 for internal and external turning of slender parts

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	30 ～ 128	-	-	-	NA

  From: 4,149,521 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge Round Shank Boring Tool Bit For Positive Inserts R/L142

  SANDVIK

  Cartridge for CoroTurn 107 for internal and external turning of slender parts

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	30 ～ 128	-	-	-	NA

  From: 4,149,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Minimum Processing Diameter φA
Application
Selfishly
Clamp Shape
Overall Length L1
Clearance angle
Shank Diameter φD
Protrusion length (L/D)
Lubrication Hole Y/N

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	SANDVIK	KYOCERA	KYOCERA	BIG DAISHOWA SEIKI	KYOCERA	SANDVIK	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	MANYO TOOLS	BIG DAISHOWA SEIKI	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	EWN Boring Head Set (For Finishing / Insert Holder Type)	Insert Holder For EWN Boring Head Replacement	CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC	S-STLB (P)-A Type Steel Bar (inner diameter, inner end surface machining) Steel Bar (inner diameter, inner end surface machining)	E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)	EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)	S...PTUN-○○ Type (Inner Diameter Machining)	CoroTurn 107, Boring Tool Bit for Turning	A/S-STLB (P)-AE Type A/S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)	SEC-Mini Bit, Offset 0 Holder, PTXN-X Type	SEC-Boring Bit, S-STUB Type	C...STXP (B) Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)	C...STZB Type Carbide Anti-vibration Bar (Boring)	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR/L	(Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)	High Speed Fine Boring Head	SEC-Boring Bit, B-STUP Type	SEC-Boring Bit, C-STUP Type/C-STUB Type	SEC-Boring Bit, D-STUP Type (vibration resistant)	SEC-Boring Bit, E-STUP Type	SEC-Boring Bit, S-CTFP Type	SEC-Boring Bit, S-DTR55C Type	SEC-Boring Bit/Sumiboron Small Diameter Boring Bit S-ETFN Type	SEC-Boring Bit, S-STUP Type	Sumiboron Small Diameter Boring Bite BNB Type	TBS Throw-away Square Bit	EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In)	A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	S-STLC-A Type Steel Bar (inner diameter, inner end surface machining)	S...STWP-E Type Excellent Bar (Profiling)	S...CTUP Type (Inner Diameter Machining)	A...PTUN11 Type Twin Hole Bar (Inner Diameter Machining: with Cutting Fluid Hole)	S...CTUN-A Type (Inner Diameter Machining)	CORO-TURN 107 Carbide Boring Bit for Positive Tips	CoroTurn 111, Boring Tool Bit for Turning	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR/L-R	Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR/L-R	Boring Tool Bit T-Max P Lever Clamp S...PTFNR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR/L	CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-STFCL	T-Max S Boring Tool Bit For Turning, CTFPR/L	T-Max S Boring Tool Bit For Turning S..CTFPR/L	Cartridge - Round Shank Boring Tool Bit For Positive Inserts, R/L140	Cartridge Round Shank Boring Tool Bit For Positive Inserts R/L142
From	14,564,330 VND	1,984,305 VND	33,252,536 VND	2,701,035 VND	8,290,240 VND	23,538,964 VND	4,478,038 VND	4,893,027 VND	3,193,558 VND	5,325,002 VND	2,737,943 VND	7,109,158 VND	7,109,158 VND	4,893,027 VND	4,893,027 VND	40,966,745 VND	4,391,961 VND	6,872,988 VND	6,639,679 VND	8,590,390 VND	2,843,974 VND	8,781,365 VND	4,752,548 VND	2,759,188 VND	4,999,893 VND	2,608,895 VND	31,229,458 VND	3,752,928 VND	2,779,206 VND	4,208,711 VND	3,649,340 VND	5,265,301 VND	6,280,460 VND	4,380,354 VND	4,893,027 VND	4,335,541 VND	18,461,603 VND	8,105,854 VND	6,979,550 VND	18,461,603 VND	10,269,696 VND	9,572,397 VND	4,893,027 VND	4,149,521 VND	4,149,521 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	8 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s)	9 Day(s)	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	10 Day(s) or more	10 Day(s) or more	7 Day(s) or more	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	9 Day(s) or more	9 Day(s)	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s)	6 Day(s) or more	7 Day(s) or more
Applicable Tip Shape	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)
Minimum Processing Diameter φA	20 ～ 100	-	19 ～ 136	8 ～ 27	14 ～ 27	32 ～ 85	20 ～ 50	11	8 ～ 27	-	8	7.5 ～ 11	8.5	11 ～ 50	11	3	10 ～ 40	8 ～ 25	14 ～ 22	10 ～ 20	16 ～ 32	44 ～ 50	34 ～ 44	10 ～ 28	10 ～ 22	-	1	10 ～ 22	10 ～ 22	20 ～ 25	27 ～ 50	20	30	8.5 ～ 25	10 ～ 32	8.5 ～ 20	13 ～ 16	20 ～ 32	8.5 ～ 20	13 ～ 16	40 ～ 50	-	20 mm ～ 32 mm	8 ～ 20	8 ～ 20
Application	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter
Selfishly	-	-	-	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	-	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand	-	-	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Clamp Shape	-	-	Screw-on	Screw-on	Screw-on	-	Lever lock	Screw-on	Screw-on	-	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	-	Screw-on	Screw-on	Screw-on	Screw-on	Clamp-on	Cable clamp	Other	Screw-on	-	Screw-on	-	Screw-on	Screw-on	Screw-on	Clamp-on	Lever lock	Clamp-on	Screw-on	Screw-on	Screw-on	Screw-on	Lever lock	Screw-on	Screw-on	Screw-on	Clamp-on	Clamp-on	Screw-on	Screw-on
Overall Length L1	-	-	-	100 ～ 250	90 ～ 300	-	150 ～ 300	125	100 ～ 250	-	100	110 ～ 164	110	100 ～ 300	125	-	100 ～ 300	100 ～ 250	150 ～ 250	100 ～ 200	150 ～ 250	250 ～ 300	200 ～ 250	100 ～ 300	140 ～ 180	80 ～ 150	-	120 ～ 200	120 ～ 200	200 ～ 220	180 ～ 315	150	220	80 ～ 250	125 ～ 300	80 ～ 200	150 ～ 180	200 ～ 300	100 ～ 200	-	-	400	200 mm ～ 300 mm	30 ～ 128	30 ～ 128
Clearance angle	-	-	-	11°	11°	-	-	7°	11°	-	5°	-	-	7°	7°	-	11°	5° / 11°	11°	11°	11°	-	0°	11°	-	-	-	-	-	-	-	-	-	7°	11°	11°	11°	-	7°	7°	-	-	11°	-	-
Shank Diameter φD	-	-	-	6 ～ 25	10 ～ 25	-	16 ～ 40	10	6 ～ 25	-	8	6 ～ 10	6	8 ～ 40	10	12	8 ～ 32	6 ～ 20	12 ～ 20	8 ～ 16	12 ～ 25	32 ～ 40	25 ～ 32	8 ～ 25	8 ～ 20	-	50 ～ 63.5	8 ～ 20	8 ～ 20	16 ～ 20	20 ～ 40	16	25	6 ～ 20	8 ～ 25	6 ～ 16	10 ～ 12	16 ～ 25	6 ～ 16	10 ～ 12	32 ～ 40	40	16 mm ～ 25 mm	-	-
Protrusion length (L/D)	-	-	-	Up to 4	~7	-	Up to 3	15 ~ 40	Up to 4 ～ ～5.5	-	-	~7	~7	9 ~ 24 ～ 60 ~ 160	15 ~ 40	-	-	-	-	-	-	-	-	-	-	-	-	～5.5	Up to 4	Up to 3	Up to 3	Up to 3	-	9 ~ 24 ～ 80	12 ~ 32 ～ 37.5 ~ 100	9 ~ 24 ～ 32	72 ~ 120 ～ 120	64 ～ 100	36 ～ 64	60～100 ～ 120	32	80/160	32.5 – 64 mm ～ 49 – 100 mm	-	-
Lubrication Hole Y/N	Available	-	Available	NA	Available	Available	NA	NA	Available / NA	-	NA	NA	NA	Available	NA	Available	NA	NA	Available	Available	NA	NA	NA	NA	NA	-	Available	Available	NA	NA	NA	Available	-	Available	Available	Available	NA	Available	Available	-	Available	-	NA	NA	NA

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	SANDVIK	KYOCERA	KYOCERA	BIG DAISHOWA SEIKI	KYOCERA	SANDVIK	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	MANYO TOOLS	BIG DAISHOWA SEIKI	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	EWN Boring Head Set (For Finishing / Insert Holder Type)	Insert Holder For EWN Boring Head Replacement	CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC	S-STLB (P)-A Type Steel Bar (inner diameter, inner end surface machining) Steel Bar (inner diameter, inner end surface machining)	E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)	EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)	S...PTUN-○○ Type (Inner Diameter Machining)	CoroTurn 107, Boring Tool Bit for Turning	A/S-STLB (P)-AE Type A/S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)	SEC-Mini Bit, Offset 0 Holder, PTXN-X Type	SEC-Boring Bit, S-STUB Type	C...STXP (B) Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)	C...STZB Type Carbide Anti-vibration Bar (Boring)	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR/L	(Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)	High Speed Fine Boring Head	SEC-Boring Bit, B-STUP Type	SEC-Boring Bit, C-STUP Type/C-STUB Type	SEC-Boring Bit, D-STUP Type (vibration resistant)	SEC-Boring Bit, E-STUP Type	SEC-Boring Bit, S-CTFP Type	SEC-Boring Bit, S-DTR55C Type	SEC-Boring Bit/Sumiboron Small Diameter Boring Bit S-ETFN Type	SEC-Boring Bit, S-STUP Type	Sumiboron Small Diameter Boring Bite BNB Type	TBS Throw-away Square Bit	EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In)	A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	S-STLC-A Type Steel Bar (inner diameter, inner end surface machining)	S...STWP-E Type Excellent Bar (Profiling)	S...CTUP Type (Inner Diameter Machining)	A...PTUN11 Type Twin Hole Bar (Inner Diameter Machining: with Cutting Fluid Hole)	S...CTUN-A Type (Inner Diameter Machining)	CORO-TURN 107 Carbide Boring Bit for Positive Tips	CoroTurn 111, Boring Tool Bit for Turning	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR/L-R	Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR/L-R	Boring Tool Bit T-Max P Lever Clamp S...PTFNR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR/L	CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-STFCL	T-Max S Boring Tool Bit For Turning, CTFPR/L	T-Max S Boring Tool Bit For Turning S..CTFPR/L	Cartridge - Round Shank Boring Tool Bit For Positive Inserts, R/L140	Cartridge Round Shank Boring Tool Bit For Positive Inserts R/L142

Loading...Tải…