Holding Tools for I.D. Tuning（Selfishly：Right-hand）

• You can add up to 6 items per a category to the compare list. Compare

  

  VNBT Type (draw machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: non-ISO standard; clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	4 ～ 5	Pull	Right-hand	-	30.8 ～ 39.8	-	-	-	-

  From: 583,218 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn XS Insert Bar For Profiling CXS-..R

  SANDVIK

  [Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor groovingFull RR: 2.0 mm

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	4.2 ～ 7.2	Internal Diameter / Inner diameter profiling	Right-hand	-	32.5 ～ 52.7	-	4 ～ 7	-	NA

  From: 1,088,618 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SCLP-A Type Steel Bar (inner diameter, inner end surface machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	12 ～ 27	Internal Diameter	Right-hand	Screw-on	140 ～ 250	11°	10 ～ 25	Up to 4	NA

  From: 2,986,568 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SCLC-A Type Steel Bar (inner diameter, inner end surface machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	10 ～ 27	Internal Diameter	Right-hand	Screw-on	120 ～ 250	7°	8 ～ 25	Up to 4	NA

  From: 2,820,828 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SDUC-A Type Steel Bar (profile machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	14 ～ 32	Inner diameter profiling	Right-hand	Screw-on	140 ～ 250	7°	10 ～ 25	Up to 4	NA

  From: 3,566,658 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SVJP (C) (B)-A Type Steel Bar (Inner Spherical Surface and Interior Edge Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	16 ～ 50	Internal Diameter	Right-hand	Screw-on	150 ～ 300	5°	12 ～ 40	Up to 4	NA

  From: 3,690,775 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PTUN-○○ Type (Inner Diameter Machining)

  KYOCERA

  [Features]·Lever lock method[Applications]·For boring bar, inner diameter machining

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 50	Internal Diameter	Right-hand	Lever lock	150 ～ 300	-	16 ～ 40	Up to 3	NA

  From: 4,478,038 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C/E-SCLC-A Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	14 ～ 27	Internal Diameter	Right-hand	Screw-on	120 ～ 300	7°	12 ～ 25	~7	Available

  From: 8,724,118 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn XS Insert Bar For Grooving CXS-..G

  SANDVIK

  [Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor groovingGroove width: 1.5 mm

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	4.2 ～ 7.2	Internal Diameter / Inner diameter profiling	Right-hand	-	27.3 ～ 57.8	-	4 ～ 7	-	NA

  From: 1,015,173 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  E-SDQC-A Carbide Anti-Vibration Bar (Profiling)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	13 ～ 30	Inner diameter profiling	Right-hand	Screw-on	105 ～ 300	-	10 ～ 25	~7	Available

  From: 8,517,945 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-STLB (P)-A Type Steel Bar (inner diameter, inner end surface machining) Steel Bar (inner diameter, inner end surface machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 27	Internal Diameter	Right-hand	Screw-on	100 ～ 200	11°	6 ～ 25	Up to 4	NA

  From: 2,701,035 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SVUC (B)-A Type Steel Bar (Undercutting)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B), positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	20 ～ 40	Inner diameter profiling	Right-hand	Screw-on	180 ～ 250	5°	16 ～ 32	Up to 4	NA

  From: 4,146,746 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VNB Type (inner diameter machined)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	2 ～ 7	Internal Diameter	Right-hand	-	26.5 ～ 49.8	-	-	-	-

  From: 522,270 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A/S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	5 ～ 27	Internal Diameter	Right-hand	Screw-on	100 ～ 250	7°	8 ～ 25	～5.5	Available / NA

  From: 3,483,788 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SDQC-A Type Steel Bar (profile machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	13 ～ 30	Inner diameter profiling	Right-hand	Screw-on	140 ～ 250	-	10 ～ 25	Up to 4	NA

  From: 3,525,036 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SDZC-A Type Steel Bar (Draw Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	14 ～ 32	Pull	Right-hand	Screw-on	140 ～ 250	7°	10 ～ 25	Up to 4	NA

  From: 3,566,658 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-STLC-A Type Steel Bar (inner diameter, inner end surface machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	12 ～ 22	Internal Diameter	Right-hand	Screw-on	140 ～ 200	-	10 ～ 20	Up to 4	NA

  From: 2,944,948 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A-SVUC (B)-AE Type Excellent Bar (Undercutting)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B), positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	16 ～ 40	Inner diameter profiling	Right-hand	Screw-on	150 ～ 250	5°	12 ～ 32	～5.5	Available

  From: 5,156,333 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SVZC (B)-A Type Steel Bar (Drawing)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B), positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	20 ～ 40	Pull	Right-hand	Screw-on	180 ～ 250	5°	16 ～ 32	Up to 4	NA

  From: 3,856,703 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EZ Bar EZB-HP Type (Internal Diameter Machining, Long Type)

  KYOCERA

  [Features]· Unique EZ adjustment structure· Easy positioning and high repeatability· Suppresses variation in machining size with high restraint force· Precision-oriented HP type

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	2 ～ 6	Internal Diameter	Right-hand	-	36 ～ 83.1	5°	2 ～ 6	-	NA

  From: 557,871 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EZB-HP (Internal Diameter Processing)

  KYOCERA

  Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	2 ～ 6	-	Right-hand	-	32 ～ 66.1	-	2 ～ 6	-	-

  From: 454,286 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EZB-ST (Internal Diameter Processing)

  KYOCERA

  Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	2 ～ 7.5	-	Right-hand	-	27.3 ～ 74.2	-	1.7 ～ 7	-	-

  From: 319,621 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVNS-N Type (no side stopper/no stop screw specifications)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	Right-hand	-	125 ～ 150	-	-	-	-

  From: 2,509,880 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A-SDQC-AE Type Excellent Bar (Profiling)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	13 ～ 30	Inner diameter profiling	Right-hand	Screw-on	140 ～ 250	-	10 ～ 25	～5.5	Available

  From: 4,643,780 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A/S-STLB (P)-AE Type A/S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 27	Internal Diameter	Right-hand	Screw-on	100 ～ 250	11°	6 ～ 25	Up to 4 ～ ～5.5	Available / NA

  From: 3,199,033 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A-SVJP (C) (B)-AE Type Excellent Bar (Inner Spherical Surface and Interior Edge Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	16 ～ 50	Internal Diameter	Right-hand	Screw-on	150 ～ 300	5°	12 ～ 40	～5.5	Available

  From: 4,871,671 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...CTUP Type (Inner Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P; clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	34 ～ 50	Internal Diameter	Right-hand	Clamp-on	220 ～ 315	-	25 ～ 40	Up to 3	NA

  From: 4,063,690 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutting Head for CORO-TURN SL CORO-TURN 107

  SANDVIK

  For inner and outer diameter turning of slender partsHigh repeatability insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20	Internal Diameter	Right-hand	Screw-on	-	-	16	20	Available

  From: 8,650,546 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, B-STUP Type

  SUMITOMO ELECTRIC HARDMETAL

  Steel shank type with anti-vibration mechanism.Screw-on type.For inner diameter, through hole / flange, blind hole machining.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 40	Internal Diameter	Right-hand	Screw-on	100 ～ 300	11°	8 ～ 32	-	NA

  From: 4,391,961 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, S-SDQC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	13 ～ 32	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	150 ～ 180	7°	10 ～ 25	-	NA

  From: 3,013,743 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Boring Bit, S-STUP Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 28	Internal Diameter	Right-hand	Screw-on	100 ～ 300	11°	8 ～ 25	-	NA

  From: 2,759,188 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SVN-SN Type (without Side Stopper, Same Diameter Type)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	Right-hand	-	90 ～ 100	-	-	-	-

  From: 5,534,630 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VNBX-S Type (inner diameter machined) [corner R (rε) flathead tolerance]

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: non-ISO standard

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	1 ～ 4	Internal Diameter	Right-hand	-	26.5 ～ 39.8	-	-	-	-

  From: 548,156 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVNS-XN Type (square shaft: L type)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: V (35° two-bolt); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	Right-hand	-	125 ～ 150	-	-	-	-

  From: 2,509,880 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A-SDZC-AE Excellent Bar (Boring)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	14 ～ 27	Pull	Right-hand	Screw-on	140 ～ 200	7°	10 ～ 20	～5.5	Available

  From: 4,685,400 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	10 ～ 18	Internal Diameter	Right-hand	Screw-on	120 ～ 180	-	8 ～ 16	～5.5	Available

  From: 3,752,928 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	14 ～ 27	Internal Diameter	Right-hand	Screw-on	90 ～ 300	11°	10 ～ 25	~7	Available

  From: 8,290,240 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S/A-SWUB (P)-AE Type Excellent Bar (Inner Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: W (hexagonal); compatible insert relief angle: positive 5° (B), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	6 ～ 22	Internal Diameter	Right-hand	Screw-on	100 ～ 200	5° / 11°	10 ～ 20	～5.5	Available / NA

  From: 3,483,788 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S-SWUB (P)-A Type Steel Bar (Inner Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: W (hexagonal); compatible insert relief angle: positive 5° (B), positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	6 ～ 22	Internal Diameter	Right-hand	Screw-on	100 ～ 200	5° / 11°	8 ～ 20	Up to 4	NA

  From: 2,737,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PDUN15 Type (Profiling)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	32 ～ 54	Inner diameter profiling	Right-hand	Pin Lock / Lever lock	200 ～ 300	-	25 ～ 40	Up to 3	Available / NA

  From: 6,420,913 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN

  SANDVIK

  First recommendation for general turning for medium to large partsInserts with breakers and materials for all machining areas

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20 ～ 63	Internal Diameter	Right-hand	Lever lock	200 ～ 350	0°	16 ～ 50	64 ～ 200	Available

  From: 8,659,311 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Boring Bit for Negative Tips

  SANDVIK

  T-Max P series turning boring bars for outer diameter turning of large to medium size parts with high productivity

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	32	Internal Diameter	Right-hand	Cable clamp	300	0°	25	37.5 ~ 100	Available

  From: 11,190,428 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 25	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	125 ～ 250	11°	10 ～ 20	15 ~ 40 ～ 30 ~ 80	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DVUNR/L

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	52	Internal Diameter	Right-hand	Cable clamp	36	-	40	-	Available

  From: 10,596,682 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Inner Diameter Grooving GNDIS○○○-T

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ It supports various tool holder such as grooving, lateral feed, profiling, end face and inner diameter processing.・ Wide range of breakers improve cutting chip processing in various situations. It suppresses sudden loss due to cutting chip clogging.・ Vibration is reduced by approximately 30% compared to the conventional product by adopting an integrated structure and die steel.・ The polish-less insert still attains high flute width accuracy of ±0.03 mm, with a flute width of 1.25 mm to 6.0 mm.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  Other	14 mm ～ 25 mm	Internal Diameter	Right-hand	-	150 mm ～ 180 mm	-	12 mm ～ 20 mm	30 mm ～ 40 mm	NA

  From: 4,616,731 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Minimum Processing Diameter φA
Application
Selfishly
Clamp Shape
Overall Length L1
Clearance angle
Shank Diameter φD
Protrusion length (L/D)
Lubrication Hole Y/N

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	SANDVIK	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SUMITOMO ELECTRIC HARDMETAL
Product SeriesDòng sản phẩm	VNBT Type (draw machining)	CoroTurn XS Insert Bar For Profiling CXS-..R	S-SCLP-A Type Steel Bar (inner diameter, inner end surface machining)	S-SCLC-A Type Steel Bar (inner diameter, inner end surface machining)	S-SDUC-A Type Steel Bar (profile machining)	S-SVJP (C) (B)-A Type Steel Bar (Inner Spherical Surface and Interior Edge Machining)	S...PTUN-○○ Type (Inner Diameter Machining)	C/E-SCLC-A Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)	CoroTurn XS Insert Bar For Grooving CXS-..G	E-SDQC-A Carbide Anti-Vibration Bar (Profiling)	S-STLB (P)-A Type Steel Bar (inner diameter, inner end surface machining) Steel Bar (inner diameter, inner end surface machining)	S-SVUC (B)-A Type Steel Bar (Undercutting)	VNB Type (inner diameter machined)	A/S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	S-SDQC-A Type Steel Bar (profile machining)	S-SDZC-A Type Steel Bar (Draw Machining)	S-STLC-A Type Steel Bar (inner diameter, inner end surface machining)	A-SVUC (B)-AE Type Excellent Bar (Undercutting)	S-SVZC (B)-A Type Steel Bar (Drawing)	EZ Bar EZB-HP Type (Internal Diameter Machining, Long Type)	EZB-HP (Internal Diameter Processing)	EZB-ST (Internal Diameter Processing)	SVNS-N Type (no side stopper/no stop screw specifications)	A-SDQC-AE Type Excellent Bar (Profiling)	A/S-STLB (P)-AE Type A/S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)	A-SVJP (C) (B)-AE Type Excellent Bar (Inner Spherical Surface and Interior Edge Machining)	S...CTUP Type (Inner Diameter Machining)	Cutting Head for CORO-TURN SL CORO-TURN 107	SEC-Boring Bit, B-STUP Type	SEC-Boring Bit, S-SDQC Type	SEC-Boring Bit, S-STUP Type	S...SVN-SN Type (without Side Stopper, Same Diameter Type)	VNBX-S Type (inner diameter machined) [corner R (rε) flathead tolerance]	SVNS-XN Type (square shaft: L type)	A-SDZC-AE Excellent Bar (Boring)	A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)	E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)	S/A-SWUB (P)-AE Type Excellent Bar (Inner Diameter Machining)	S-SWUB (P)-A Type Steel Bar (Inner Diameter Machining)	S...PDUN15 Type (Profiling)	T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN	CORO-TURN RC, Boring Bit for Negative Tips	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L	CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DVUNR/L	Holder For Inner Diameter Grooving GNDIS○○○-T
From	583,218 VND	1,088,618 VND	2,986,568 VND	2,820,828 VND	3,566,658 VND	3,690,775 VND	4,478,038 VND	8,724,118 VND	1,015,173 VND	8,517,945 VND	2,701,035 VND	4,146,746 VND	522,270 VND	3,483,788 VND	3,525,036 VND	3,566,658 VND	2,944,948 VND	5,156,333 VND	3,856,703 VND	557,871 VND	454,286 VND	319,621 VND	2,509,880 VND	4,643,780 VND	3,199,033 VND	4,871,671 VND	4,063,690 VND	8,650,546 VND	4,391,961 VND	3,013,743 VND	2,759,188 VND	5,534,630 VND	548,156 VND	2,509,880 VND	4,685,400 VND	3,752,928 VND	8,290,240 VND	3,483,788 VND	2,737,958 VND	6,420,913 VND	8,659,311 VND	11,190,428 VND	4,893,027 VND	10,596,682 VND	4,616,731 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s)	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s) or more	6 Day(s) or more
Applicable Tip Shape	-	-	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	T (Triangle)	C (80° Diamond-Shape)	-	D (55° Diamond-Shape)	T (Triangle)	V (35° Diamond-Shaped)	-	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	T (Triangle)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	-	-	-	-	D (55° Diamond-Shape)	T (Triangle)	V (35° Diamond-Shaped)	T (Triangle)	C (80° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	T (Triangle)	-	-	-	D (55° Diamond-Shape)	T (Triangle)	T (Triangle)	W (Hexagonal Type)	W (Hexagonal Type)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	Other
Minimum Processing Diameter φA	4 ～ 5	4.2 ～ 7.2	12 ～ 27	10 ～ 27	14 ～ 32	16 ～ 50	20 ～ 50	14 ～ 27	4.2 ～ 7.2	13 ～ 30	8 ～ 27	20 ～ 40	2 ～ 7	5 ～ 27	13 ～ 30	14 ～ 32	12 ～ 22	16 ～ 40	20 ～ 40	2 ～ 6	2 ～ 6	2 ～ 7.5	-	13 ～ 30	8 ～ 27	16 ～ 50	34 ～ 50	20	10 ～ 40	13 ～ 32	10 ～ 28	-	1 ～ 4	-	14 ～ 27	10 ～ 18	14 ～ 27	6 ～ 22	6 ～ 22	32 ～ 54	20 ～ 63	32	15 ～ 25	52	14 mm ～ 25 mm
Application	Pull	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Inner diameter profiling	Internal Diameter	Inner diameter profiling	Internal Diameter	Internal Diameter	Inner diameter profiling	Pull	Internal Diameter	Inner diameter profiling	Pull	Internal Diameter	-	-	-	Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	-	Internal Diameter	-	Pull	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter
Selfishly	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand
Clamp Shape	-	-	Screw-on	Screw-on	Screw-on	Screw-on	Lever lock	Screw-on	-	Screw-on	Screw-on	Screw-on	-	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	-	-	-	-	Screw-on	Screw-on	Screw-on	Clamp-on	Screw-on	Screw-on	Screw-on	Screw-on	-	-	-	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Pin Lock / Lever lock	Lever lock	Cable clamp	Screw-on	Cable clamp	-
Overall Length L1	30.8 ～ 39.8	32.5 ～ 52.7	140 ～ 250	120 ～ 250	140 ～ 250	150 ～ 300	150 ～ 300	120 ～ 300	27.3 ～ 57.8	105 ～ 300	100 ～ 200	180 ～ 250	26.5 ～ 49.8	100 ～ 250	140 ～ 250	140 ～ 250	140 ～ 200	150 ～ 250	180 ～ 250	36 ～ 83.1	32 ～ 66.1	27.3 ～ 74.2	125 ～ 150	140 ～ 250	100 ～ 250	150 ～ 300	220 ～ 315	-	100 ～ 300	150 ～ 180	100 ～ 300	90 ～ 100	26.5 ～ 39.8	125 ～ 150	140 ～ 200	120 ～ 180	90 ～ 300	100 ～ 200	100 ～ 200	200 ～ 300	200 ～ 350	300	125 ～ 250	36	150 mm ～ 180 mm
Clearance angle	-	-	11°	7°	7°	5°	-	7°	-	-	11°	5°	-	7°	-	7°	-	5°	5°	5°	-	-	-	-	11°	5°	-	-	11°	7°	11°	-	-	-	7°	-	11°	5° / 11°	5° / 11°	-	0°	0°	11°	-	-
Shank Diameter φD	-	4 ～ 7	10 ～ 25	8 ～ 25	10 ～ 25	12 ～ 40	16 ～ 40	12 ～ 25	4 ～ 7	10 ～ 25	6 ～ 25	16 ～ 32	-	8 ～ 25	10 ～ 25	10 ～ 25	10 ～ 20	12 ～ 32	16 ～ 32	2 ～ 6	2 ～ 6	1.7 ～ 7	-	10 ～ 25	6 ～ 25	12 ～ 40	25 ～ 40	16	8 ～ 32	10 ～ 25	8 ～ 25	-	-	-	10 ～ 20	8 ～ 16	10 ～ 25	10 ～ 20	8 ～ 20	25 ～ 40	16 ～ 50	25	10 ～ 20	40	12 mm ～ 20 mm
Protrusion length (L/D)	-	-	Up to 4	Up to 4	Up to 4	Up to 4	Up to 3	~7	-	~7	Up to 4	Up to 4	-	～5.5	Up to 4	Up to 4	Up to 4	～5.5	Up to 4	-	-	-	-	～5.5	Up to 4 ～ ～5.5	～5.5	Up to 3	20	-	-	-	-	-	-	～5.5	～5.5	~7	～5.5	Up to 4	Up to 3	64 ～ 200	37.5 ~ 100	15 ~ 40 ～ 30 ~ 80	-	30 mm ～ 40 mm
Lubrication Hole Y/N	-	NA	NA	NA	NA	NA	NA	Available	NA	Available	NA	NA	-	Available / NA	NA	NA	NA	Available	NA	NA	-	-	-	Available	Available / NA	Available	NA	Available	NA	NA	NA	-	-	-	Available	Available	Available	Available / NA	NA	Available / NA	Available	Available	Available	Available	NA

Loading...Tải…