Grooving / Cutting Off Holders（Selfishly：Left-hand Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type

  KYOCERA

  A clamp-on type outer diameter deep grooving holder.For outer diameter deep grooving.A right angle type.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 4,063,690 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type

  KYOCERA

  A clamp-on type outer diameter deep grooving holder.For outer diameter deep grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 3,566,470 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 3,918,668 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)

  KYOCERA

  Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 8,580,096 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)

  KYOCERA

  GIV model tip for small diameter grroving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 341,283 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Shallow Groove Holder KIGBA Type

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; type: integrated

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 5,431,043 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 5,182,433 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Function / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Relief Grooving Holder KIGM-8/KIGMU-8

  KYOCERA

  Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 15,168,250 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit)

  KYOCERA

  T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 2,095,531 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)

  KYOCERA

  · T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 4,560,910 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder KFMS Type

  KYOCERA

  Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	3 ～ 5(6)	-	Left-hand	30 ～ ∞	-	25

  From: 5,493,195 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder KFMS-8 Type

  KYOCERA

  [Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: clamp-on (C)

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 5,493,195 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Blade KFTB-S Type

  KYOCERA

  [Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 4,830,236 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type

  KYOCERA

  [Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 5,368,890 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip KGD Type (for Automatic Plate)

  KYOCERA

  4.0 mm wide insert can also be mounted on KGDR/L1212JX-3, but this is not recommended due to the lack of holder rigidity.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 2,898,945 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 3,750,590 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  QS Holding System for CoroCut XS Bit

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	0.7-2.0	-	Left-hand	-	2 Corner	12

  From: 4,307,846 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Shank Bit for End Surface Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	3 ～ 5	8.7 ～ 10.7	Left-hand	-	1 Corner	25

  From: 5,712,653 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Plunging/Grooving Shank Bit

  SANDVIK

  A parting-off and grooving tool that improves part production capacity by realizing high productivity and long tool lifespan

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	5	32	Left-hand	-	1 Corner	32

  From: 6,123,813 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Plunging/Grooving Boring Bit

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	5	13	Left-hand	-	2 Corner	47

  From: 16,151,126 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  CoroCut 1/2 Plunging/Grooving Shank Bit

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	1.5 ～ 11	8 ～ 50	Left-hand	-	1 Corner / 2 Corner	12 ～ 40

  From: 4,684,745 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL, Edge Grooving Blade for CoroCut 1/2

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	5 ～ 6	18	Left-hand	70 ～ 400	2 Corner	-

  From: 8,561,026 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL70, HP Cutting Head

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Profiling	10 ～ 12	20 ～ 35	Left-hand	-	1 Corner	-

  From: 16,248,840 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL70, HP Cutting Head for Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding	4 ～ 15	15 ～ 65	Left-hand	-	1 Corner / 2 Corner	-

  From: 16,248,840 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL70, HP Cutting Head for Edge Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	4 ～ 6	40	Left-hand	300 ～ 500	2 Corner	-

  From: 16,248,840 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut, Q Cut, Blade/Adapter

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	4 ～ 15	32 ～ 120	Left-hand	-	1 Corner / 2 Corner	31.9 ～ 101.6

  From: 5,358,350 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Boring Tool Bit R/LAG 123 Cylindrical Shank

  SANDVIK

  [Features]A high clamp rigidity type boring tool bit for inner-diameter grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For inner-diameter grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	1.5 ～ 5	4.5 ～ 8	Left-hand	-	2 Corner	-

  From: 6,510,256 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Tool, Profiling Tool, And Turning Tool Blades For CoroCut 1/2 Head For Grooving

  SANDVIK

  1-corner and 2-corner grooving heads that are highly versatile and cover a variety of machining

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	-	-	Left-hand	-	2 Corner	-

  From: 12,429,558 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Face Grooving

  SANDVIK

  [Features]・ High clamp rigidity shank holder for end face grooving・ Unique rail lock seat and V-shaped seat firmly receive lateral cutting force and bring high stability・ For end face grooving

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	3 ～ 8	12 ～ 28	Left-hand	-	2 Corner	25

  From: 5,884,531 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutting Head, CoroTurn SL70 Coupling, Flange Grooving Blade, SL70-L/R123

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	4 ～ 6	15 ～ 40	Left-hand	200 ～ 500	2 Corner	-

  From: 16,164,278 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Tool Bit For QS Holding System, High Accuracy Coolant Jet Parting/Grooving Tool QS-R/LF

  SANDVIK

  Sandvik Grooving/Cut-Off Holder Short Bit for QS Holding System High Precision Coolant Jet QS-R/LF

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	0.5-3.18 ～ 0.5 to 3.18	6.4	Left-hand	1	3 Corner	12 ～ 16

  From: 9,928,323 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  QS Series, Short Tool Bit, QS-SMALR/L1616E3HP

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	-	-	Left-hand	-	2 Corner	16

  From: 8,825,438 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	0.5-3.18	6.4	Left-hand	1	3 Corner	10

  From: 9,928,323 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF123

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	-	-	Left-hand	-	3 Corner	10 ～ 16

  From: 5,788,785 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.5 ～ 3	-	Left-hand	-	2 Corner	10 ～ 16

  From: 5,788,785 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max, Q-Cut, Flange Grooving, 570-32R/L151.3-024/-023/A/B

  SANDVIK

  Parting and grooving tools that improve part production capacity by realizing high productivity and long tool life

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	3	8.69	Left-hand	35	1 Corner	-

  From: 8,561,026 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L

  SANDVIK

  Sandvik Grooving/cutting off holder T-Max Q-Cut SL (Type 151.3) Internal grooving, profiling blade 570-R/L

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	5 ～ 8	8 ～ 13	Left-hand	-	1 Corner	-

  From: 5,896,544 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Coromant Capto Cutting Unit C-R/LF151.23

  SANDVIK

  Sandvik Grooving/Cut-Off Holder T-Max Q-Cut Coromant Capto Cutting Unit CR/LF151.23

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	2 ～ 6	20 ～ 60	Left-hand	-	1 Corner	-

  From: 9,652,163 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 3 SL Blade Screw Clamp For Shallow Cut-Off Machining 570-R/L 123 U/T

  SANDVIK

  3 corners, high productivity for shallow parting, one holder for all insert widths

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.5	6.4	Left-hand	-	3 Corner	-

  From: 4,684,745 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Shank Tool Bit For Machining Outer Diameters MB-R/L

  SANDVIK

  High-precision tools for grooving, face grooving, profiling and pre-parting off.[Features]·The cutting edge of the insert is sharp and coated with a thin film, making it a stable tool ideal for internal machining.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Edge surface grooving	1.5	-	Left-hand	-	1 Corner	12 ～ 25

  From: 4,206,320 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut Reinforced Shank Tool Bit For Parting With Small 1/2 f1 Offset, R/LF123

  SANDVIK

  [Features]A high clamp rigidity type shank holder for parting and grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented) The holder strength is high thanks to the jaw. For parting and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 4	17 ～ 22	Left-hand	-	2 Corner	20 ～ 25

  From: 5,039,802 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Coromant Capto Cutting Unit, Screw Clamp, C-R/LF123

  SANDVIK

  [Features]A high clamp rigidity type cutting head for parting and grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For parting and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Horizontal feeding	1.5 ～ 8	13 ～ 25	Left-hand	-	2 Corner	-

  From: 9,652,163 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Face Grooving, Screw Clamp, R/LG123

  SANDVIK

  [Features]A high clamp rigidity type shank holder for face grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	4 ～ 8	13 ～ 20	Left-hand	-	2 Corner	25

  From: 6,461,828 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Head For Grooving End Surfaces 570

  SANDVIK

  Versatile shank bit for face grooving with 1-corner and 2-corner specifications

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Cutting off	-	-	Left-hand	-	2 Corner	-

  From: 9,173,265 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LF123

  SANDVIK

  Versatile 1-corner and 2-corner shank tool for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding / Profiling	6	22	Left-hand	-	2 Corner	25

  From: 5,782,440 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type	Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)	Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)	Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)	Inner Diameter Shallow Groove Holder KIGBA Type	Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type	Multi-Function / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Relief Grooving Holder KIGM-8/KIGMU-8	Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit)	Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)	Multi-Functional / End Face Grooving Holder KFMS Type	Multi-Functional / End Face Grooving Holder KFMS-8 Type	Grooved End Face Blade KFTB-S Type	Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type	Slit Tip KGD Type (for Automatic Plate)	Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)	QS Holding System for CoroCut XS Bit	T-Max Q-Cut Shank Bit for End Surface Grooving	T-Max Q-Cut Plunging/Grooving Shank Bit	CoroCut 1/2 Plunging/Grooving Boring Bit	CoroCut 1/2 Plunging/Grooving Shank Bit	CORO-TURN SL, Edge Grooving Blade for CoroCut 1/2	CORO-TURN SL70, HP Cutting Head	CORO-TURN SL70, HP Cutting Head for Grooving	CORO-TURN SL70, HP Cutting Head for Edge Grooving	CoroCut, Q Cut, Blade/Adapter	CoroCut 1/2 Boring Tool Bit R/LAG 123 Cylindrical Shank	Grooving Tool, Profiling Tool, And Turning Tool Blades For CoroCut 1/2 Head For Grooving	CoroCut 1/2 Shank Tool Bit For Face Grooving	Cutting Head, CoroTurn SL70 Coupling, Flange Grooving Blade, SL70-L/R123	Short Tool Bit For QS Holding System, High Accuracy Coolant Jet Parting/Grooving Tool QS-R/LF	QS Series, Short Tool Bit, QS-SMALR/L1616E3HP	Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF	Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF123	Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123	T-Max, Q-Cut, Flange Grooving, 570-32R/L151.3-024/-023/A/B	T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L	T-Max Q-Cut Coromant Capto Cutting Unit C-R/LF151.23	CoroCut 3 SL Blade Screw Clamp For Shallow Cut-Off Machining 570-R/L 123 U/T	CoroCut MB Shank Tool Bit For Machining Outer Diameters MB-R/L	CoroCut Reinforced Shank Tool Bit For Parting With Small 1/2 f1 Offset, R/LF123	CoroCut 1/2 Coromant Capto Cutting Unit, Screw Clamp, C-R/LF123	CoroCut 1/2 Shank Tool Bit For Face Grooving, Screw Clamp, R/LG123	CoroCut 1/2 Head For Grooving End Surfaces 570	CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LF123
From	4,063,690 VND	3,566,470 VND	3,918,668 VND	8,580,096 VND	341,283 VND	5,431,043 VND	5,182,433 VND	15,168,250 VND	2,095,531 VND	4,560,910 VND	5,493,195 VND	5,493,195 VND	4,830,236 VND	5,368,890 VND	2,898,945 VND	3,750,590 VND	4,307,846 VND	5,712,653 VND	6,123,813 VND	16,151,126 VND	4,684,745 VND	8,561,026 VND	16,248,840 VND	16,248,840 VND	16,248,840 VND	5,358,350 VND	6,510,256 VND	12,429,558 VND	5,884,531 VND	16,164,278 VND	9,928,323 VND	8,825,438 VND	9,928,323 VND	5,788,785 VND	5,788,785 VND	8,561,026 VND	5,896,544 VND	9,652,163 VND	4,684,745 VND	4,206,320 VND	5,039,802 VND	9,652,163 VND	6,461,828 VND	9,173,265 VND	5,782,440 VND
Days to ShipSố ngày giao hàng	9 Day(s) or more	10 Day(s) or more	10 Day(s) or more	9 Day(s) or more	7 Day(s) or more	8 Day(s) or more	9 Day(s) or more	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	9 Day(s) or more	10 Day(s) or more	8 Day(s) or more	10 Day(s) or more	9 Day(s) or more	6 Day(s) or more	8 Day(s) or more	7 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Application	-	-	-	-	-	-	-	-	-	-	Edge surface grooving	-	-	-	-	-	Outer Diameter Grooving / Cutting off	Edge surface grooving	Outer Diameter Grooving / Cutting off / Profiling	Inner Diameter Grooving / Profiling	Outer Diameter Grooving / Cutting off / Profiling	Edge surface grooving / Horizontal feeding	Outer Diameter Grooving / Profiling	Outer Diameter Grooving / Horizontal feeding	Edge surface grooving / Horizontal feeding	Outer Diameter Grooving / Cutting off	Inner Diameter Grooving / Profiling	Inner Diameter Grooving / Profiling	Edge surface grooving / Horizontal feeding	Edge surface grooving / Horizontal feeding	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Edge surface grooving / Horizontal feeding	Inner Diameter Grooving / Profiling	Outer Diameter Grooving / Cutting off / Profiling	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Edge surface grooving	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off / Horizontal feeding	Edge surface grooving / Horizontal feeding	Edge surface grooving / Cutting off	Outer Diameter Grooving / Horizontal feeding / Profiling
Groove Width(mm)	-	-	-	-	-	-	-	-	-	-	3 ～ 5(6)	-	-	-	-	-	0.7-2.0	3 ～ 5	5	5	1.5 ～ 11	5 ～ 6	10 ～ 12	4 ～ 15	4 ～ 6	4 ～ 15	1.5 ～ 5	-	3 ～ 8	4 ～ 6	0.5-3.18 ～ 0.5 to 3.18	-	0.5-3.18	-	1.5 ～ 3	3	5 ～ 8	2 ～ 6	1.5	1.5	2 ～ 4	1.5 ～ 8	4 ～ 8	-	6
Maximum Groove Depth(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	8.7 ～ 10.7	32	13	8 ～ 50	18	20 ～ 35	15 ～ 65	40	32 ～ 120	4.5 ～ 8	-	12 ～ 28	15 ～ 40	6.4	-	6.4	-	-	8.69	8 ～ 13	20 ～ 60	6.4	-	17 ～ 22	13 ～ 25	13 ～ 20	-	22
Selfishly	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand	Left-hand
Maximum Machining Diameter(mm)	-	-	-	-	-	-	-	-	-	-	30 ～ ∞	-	-	-	-	-	-	-	-	-	-	70 ～ 400	-	-	300 ～ 500	-	-	-	-	200 ～ 500	1	-	1	-	-	35	-	-	-	-	-	-	-	-	-
Number of corners for tip use	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2 Corner	1 Corner	1 Corner	2 Corner	1 Corner / 2 Corner	2 Corner	1 Corner	1 Corner / 2 Corner	2 Corner	1 Corner / 2 Corner	2 Corner	2 Corner	2 Corner	2 Corner	3 Corner	2 Corner	3 Corner	3 Corner	2 Corner	1 Corner	1 Corner	1 Corner	3 Corner	1 Corner	2 Corner	2 Corner	2 Corner	2 Corner	2 Corner
Shank height(mm)	-	-	-	-	-	-	-	-	-	-	25	-	-	-	-	-	12	25	32	47	12 ～ 40	-	-	-	-	31.9 ～ 101.6	-	-	25	-	12 ～ 16	16	10	10 ～ 16	10 ～ 16	-	-	-	-	12 ～ 25	20 ～ 25	-	25	-	25

Loading...Tải…