(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
325 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.[Features]· Allows high efficiency flat drilling up to hole depth 3D.· A drill with oil hole that supports stainless steel.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 16 | 68 ~ 146 | 2 ~ 72 | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | End Mill Shank / straight shank | Carbide | Available | Available | Other |
From: 2,656,894 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide NC Drill (D5315 Series)
YG 1
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | 50 ~ 90 | 10 ~ 24 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | - | Carbide | NA | NA | Non-Coated |
From: 543,353 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A drill that is difficult to break and stable for machining.[Features]· Employs cemented carbide ideal for small diameter hole drilling.· A drill with high rigidity is used.· The cutting load has been reduced by circumferential clearance and thinning.[Applications]· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.2 ~ 1.99 | 38 ~ 47 | 2.5 ~ 15 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | End Mill Shank | Carbide | NA | Available | Other |
From: 544,333 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A drill for high-speed wet machining and dry machining of aluminum alloys.[Features]· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.· Dry machining of aluminum alloy is possible.· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.· Allows also non-step boring of hole depth 5D.[Applications]· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 12 | 47 ~ 130 | 15 ~ 73 | Aluminum[◎] / Copper[○] | End Mill Shank / straight shank | Carbide | NA | Available | DLC |
From: 889,172 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills for Non-Ferrous Metal_NF-GDN
OSG
It realizes high-speed drilling of aluminum castings, aluminum die-casts, and wrought aluminum materials that are frequently used in automobiles with high cost-effectiveness.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 13 | 59 ~ 128 | 25 ~ 76 | Cast Iron[◎] / Aluminum[◎] / Copper[○] | End Mill Shank / straight shank | Carbide | NA | NA | Non-Coated |
From: 605,000 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
WXS Coated Carbide Drill for Hardened Steel (5D Type)_WH55-5D
OSG
Allows stable machining of die-cast dies. Most suitable for steel materials up to 55 HRC.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 12 | 68 ~ 156 | 18 ~ 96 | Quenched and tempered steel[◎] / high hardness steel[◎] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
From: 1,513,008 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Sweep Cut Drill Straight Shank
ATOM
Drastically reduces the burrs of through holes. Achieves high hole position and hole diameter precision by suppressing bit runout and deflection when biting. Suppresses hole bending.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 6 | 50 ~ 102 | 16 ~ 50 | Aluminum[◎] / Resin[◎] | End Mill Shank | Carbide | NA | NA | Non-Coated |
From: 973,171 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
End Mill Shank Drill 5 × D with Oil Hole RT100U 5511
GUHRING
[Features]· Internal lubrication enables high performance drilling without steps.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | 66 ~ 153 | 28 ~ 101 | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] | End Mill Shank | Carbide | Available | Available | Other |
From: 2,714,500 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Drill, 4 × D, Type-N 6400
GUHRING
[Features]· Improves chip disposal by increasing groove width, allowing stable small diameter hole milling.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1.1 ~ 2.5 | 47 ~ 59 | 6.6 ~ 15 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] | - | Carbide | NA | Available | Other |
From: 2,328,438 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YG 1
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 10.5 | 32 ~ 115 | 10 ~ 60 | Cast Iron[○] / Copper[○] | - | Carbide | NA | Available | TiAlN |
From: 288,155 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
AQDEXZOH5D Aqua Drill EX Flat Oil Hole 5D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.[Features]· Allows high efficiency flat drilling up to hole depth 5D.· A centering hole or guide hole is required.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 16 | 74 ~ 178 | 20 ~ 104 | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | End Mill Shank / straight shank | Carbide | Available | Available | Other |
From: 3,123,316 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Flat Long Shank AQDEXZLS
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Flat drill 10D type with excellent drilling performance.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | 100 ~ 250 | 14 ~ 90 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | End Mill Shank | Carbide | Available / NA | Available | Other |
From: 1,964,244 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·No complicated estimates required. It is possible to order part number of stepped drill bit without drawings
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | - | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | straight shank | Carbide | NA | NA | - |
Days to Ship: Số ngày giao hàng: 11 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3D AQDEXOH3D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.[Applications]· Stable processing of mild steel to high hardness materials.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 16 | 68 ~ 146 | 17 ~ 80 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | End Mill Shank / straight shank | Carbide | Available | Available | Other |
From: 2,391,126 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
3Flutes Carbide Drill with Internal Coolant Supply 5D Type (MEGA MUSCLE DRILL)_TRS-HO-5D
OSG
Achieves feed speeds of over Vf = 1,000 mm/min when processing steel/cast iron
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
5 ~ 18.5 | 95 ~ 217 | 41 ~ 148 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | End Mill Shank / straight shank | Carbide | Available | Available | Other |
From: 3,946,667 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
WXS Coated Carbide Drill for Hardened Steel with Internal Coolant Supply (5D Type)_WHO55-5D
OSG
Most suitable for steel materials and Ni-based alloys up to 55 HRC. The specifications with lubrication holes enable longer lifespan machining.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.3 ~ 12 | 78 ~ 156 | 32 ~ 96 | Quenched and tempered steel[◎] / high hardness steel[◎] | End Mill Shank / straight shank | Carbide | Available | Available | Other |
From: 2,722,190 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Toglon Hard Drill Bit Regular ALT Coating
IWATA TOOL
· 3-flute blade design gives a finish with outstanding hole diameter accuracy and hole surface roughness.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 5.5 | 50 ~ 120 | 6 ~ 33 | Quenched and tempered steel[◎] / high hardness steel[○/◎] / Machinable Ceramics[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 1,847,196 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Short Blades
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.1 ~ 3 | 38 | 0.6 ~ 12 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | End Mill Shank | Carbide | NA | Available | For General Steels (AlCrN, etc.) |
From: 719,796 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drill for Cast Iron / Nonferrous SSN
OKAZAKI SEIKO
Drill bit suitable for drilling cast iron and non-ferrous metal with an X-thinning shaped tip.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.5 ~ 13 | 45 ~ 118 | 6 ~ 60 | general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | straight shank | Carbide | NA | NA | Non-Coated |
From: 706,661 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Shank Drill, 3 × D Type N 730
GUHRING
[Features]· Highly versatile carbide solid drill.· Supports various workpiece materials such as aluminum or general steel.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.5 ~ 16 | 20 ~ 115 | 3 ~ 58 | general steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○] | straight shank | Carbide | NA | NA | - |
From: 378,208 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DIJET
Because it uses carbide materials, it has both high hardness and elasticity, and can be used for machining general steel, cast iron, and aluminum.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 6 | 45 ~ 90 | 1 ~ 6 | general steel[○] / Cast Iron[◎] / Aluminum[○] | Taper shank | Carbide | NA | NA | Non-Coated |
From: 1,740,103 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 10D AQDEXOH10D
NACHI(FUJIKOSHI)
[Features]· Drill capable of wet machining and MQL machining.· For highly-efficient hole drilling up to 10 times the drill diameter.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 12 | 61 ~ 216 | 13 ~ 156 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | straight shank | Carbide | Available | Available | For General Steels (AlCrN, etc.) |
From: 3,714,894 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3-Flute 3D AQDEXOH3F3D
NACHI(FUJIKOSHI)
[Features]· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.· Capable of highly-efficient hole drilling up to 3 times the drill diameter.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 16 | 68 ~ 146 | 17 ~ 80 | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | straight shank | Carbide | Available | Available | For General Steels (AlCrN, etc.) |
From: 2,916,110 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3-Flute 5D AQDEXOH3F5D
NACHI(FUJIKOSHI)
[Features]· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.· Capable of highly-efficient hole drilling up to 5 times the drill diameter.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 16 | 78 ~ 194 | 28 ~ 128 | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | straight shank | Carbide | Available | Available | For General Steels (AlCrN, etc.) |
From: 3,460,740 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A flat tip for indexable drills that is ideal for high-efficiency, high-precision machining of large diameters.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
14 ~ 32 | - | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | - | Carbide | - | - | For General Steels (AlCrN, etc.) |
From: 1,692,879 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills Medium for High Speed Processing_FS-GDN
OSG
Carbide drill medium type for high-speed machining with excellent heat resistance and abrasion resistance.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.5 ~ 4.5 | 60 ~ 71 | 30 ~ 36 | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 3,444,911 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Crystal Solid Drill ZH300, TiN Coating
RYOCO SEIKI
[Features]・ TiN coating is a versatile and reliable coating.・ Surface hardness HV 2,000 to 2,200, heat resistant temperature around 500°C, friction coefficient 0.4・ The outer diameter and shank diameter are the same.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 | 40 | 20 | - | End Mill Shank | Carbide | NA | Available | TiN |
From: 684,296 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D
OSG
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 5D type with oil hole
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 70 ~ 205 | 18 ~ 140 | general steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | End Mill Shank / straight shank | Carbide | Available | Available | Other |
From: 2,186,243 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Drill (Heavy Duty Type) for Ultra-Hard Steel, For 4D SDX4A
OKAZAKI SEIKO
[Features]· New design of the tip shape and new flute shape realize smooth cutting chip discharge[Specifications]· External lubrication specification· For 4D
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.85 ~ 11.85 | - | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 878,775 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
MISUMI
[Features]·Corner radius treatment suppresses chipping·By adopting wavy flute shape, it achieves outstanding cutting sharpness and strength, and promotes cutting chip discharge·Demonstrates high centripetal force by applying three rake + R thinning·Combination of ultra-fine grain cemented carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high-speed machining·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 13 | 49 ~ 124 | 16 ~ 77 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | straight shank | Carbide | NA | Available | TiAlN |
From: 836,385 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
MISUMI
[Features]·Capable of high feed and high speed cutting from general steel to stainless steel·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning·Suppresses chipping by applying chamfer edge treatment to the shoulder·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 8 | 62 ~ 79 | 20 ~ 41 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 881,216 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill, Straight Shank / Stub Model
MISUMI
[Features]·Versatile carbide drill for a wide range of applications·TiAlN coating enables high-speed cutting·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 8 | 26 ~ 79 | 6 ~ 37 | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | straight shank | Carbide | NA | Available | TiAlN |
From: 472,095 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Long Drill, Straight Shank
MISUMI
Carbide long drill that achieves the high efficiency deep-hole drilling
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 10 | 100 ~ 200 | 60 ~ 140 | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | straight shank | Carbide | Available / NA | Available | TiAlN |
From: 2,442,026 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Burnishing Drill, Straight Model
MISUMI
[Features]·Achieves high-precision drilling of aluminum without a pilot hole·Tip diameter can be specified in units of 0.01 mm and groove length in units of 0.1 mm
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0 | 40 ~ 60 | 0 | Cast Iron[○] / Aluminum[◎] / Copper[○] | End Mill Shank | Carbide | NA | NA | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 5D AQDEXOH5D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Product lineup is for 3D, 5D and 8D boring depths.· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.· Capable of stable wet processing and MQL processing.· For highly-efficient hole drilling up to 5 times the drill diameter.[Applications]· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 16 | 56 ~ 194 | 8 ~ 128 | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Titanium[○] | End Mill Shank / straight shank | Carbide | Available | Available | Other |
From: 2,785,966 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.[Features]· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.[Applications]· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.7 ~ 10 | 56 ~ 110 | 24 ~ 60 | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
From: 2,111,587 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aqua Drill, Stub, Carbide Drill, AQDS
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.[Features]· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.[Applications]· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.· Drill for dry machining.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
4 ~ 12.5 | 54 ~ 110 | 22 ~ 51 | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | End Mill Shank / straight shank | Carbide | NA | Available | Other |
From: 1,801,361 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills TiAlN coated Medium for Hardened Steels_FH-GDN
OSG
Developed for machining small diameter holes in hardened steel, it is capable of machining deep holes (up to 7D or so)
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 2 | 38 ~ 50 | 2.5 ~ 18 | Quenched and tempered steel[○] / high hardness steel[◎] | End Mill Shank | Carbide | NA | Available | Other |
From: 1,571,986 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
Non-step machining of 15D to 30D ultra-deep holes. It achieves machining efficiency several times that of gun drill bits and high-speed steel drill bits, and tool lifespan.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 10 | 105 ~ 315 | 55 ~ 265 | Aluminum[◎] / Copper[○] | End Mill Shank / straight shank | Carbide | Available | NA | Non-Coated |
From: 7,153,333 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
MUGEN-COATING Miniature Drill MDR-R
NS TOOL
[Features]・ MUGEN coating is used to achieve long lifespan and stable drilling.・ High-precision specifications suitable for precision part machining. Diameter tolerance 0 to -0.005 mm
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
.0.4 ~ 1 | 38 | 1.2 ~ 10 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | End Mill Shank | Carbide | - | Available | TiAlN |
From: 559,863 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Drill, for Stainless Steel
ATOM
Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.1 ~ 3 | 38 ~ 45 | 1 ~ 15 | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] | End Mill Shank | Carbide | NA | Available | For General Steels (AlCrN, etc.) |
From: 770,550 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ATOM
A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.1 ~ 3 | 38 | 0.6 ~ 12 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | End Mill Shank | Carbide | NA | NA | Non-Coated |
From: 608,256 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
End Mill Shank Drill 12 × D, with Oil Hole, RT 100 Double Margin 5525
GUHRING
The use of a double margin provides excellent straightness and enables highly accurate deep drilling. Internal lubrication enables high performance drilling without steps.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | 90 ~ 310 | 50 ~ 258 | - | End Mill Shank | Carbide | Available | Available | Other |
From: 4,710,843 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
End Mill Shank Drill 3 × D for Carbide Processing H 1946
GUHRING
High-rigidity design capable of drilling holes in hardened steel up to 70 HRC.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | 62 ~ 102 | 20 ~ 55 | - | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 3,622,481 VND |
---|
Days to Ship: Số ngày giao hàng: 24 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GUHRING
A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2.5 ~ 8 | 185 ~ 485 | 155 ~ 440 | - | - | Carbide | Available | Available | Other |
From: 8,777,943 VND |
---|
Days to Ship: Số ngày giao hàng: 24 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Hole diameter (drill diameter) D(mm) |
Overall Length L(mm) |
Groove Length L(mm) |
work material |
Shank Type |
Tool Material Type |
With/without Oil Hole |
Coating Y/N |
Coating Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | NACHI(FUJIKOSHI) | YG 1 | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | ATOM | GUHRING | GUHRING | YG 1 | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | IWATA TOOL | ATOM | OKAZAKI SEIKO | GUHRING | DIJET | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | RYOCO SEIKI | OSG | OKAZAKI SEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | NS TOOL | ATOM | ATOM | GUHRING | GUHRING | GUHRING |
Product SeriesDòng sản phẩm | WXS Coated Carbide Drill for Hardened Steel (5D Type)_WH55-5D | 3Flutes Carbide Drill with Internal Coolant Supply 5D Type (MEGA MUSCLE DRILL)_TRS-HO-5D | WXS Coated Carbide Drill for Hardened Steel with Internal Coolant Supply (5D Type)_WHO55-5D | Solid Carbide Drills Medium for High Speed Processing_FS-GDN | Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D | Solid Drill (Heavy Duty Type) for Ultra-Hard Steel, For 4D SDX4A | TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub | Solid Carbide Drills TiAlN coated Medium for Hardened Steels_FH-GDN | End Mill Shank Drill 12 × D, with Oil Hole, RT 100 Double Margin 5525 | |||||||||||||||||||||||||||||||||||
From | 2,656,894 VND | 543,353 VND | 544,333 VND | 889,172 VND | 605,000 VND | 1,513,008 VND | 973,171 VND | 2,714,500 VND | 2,328,438 VND | 288,155 VND | 3,123,316 VND | 1,964,244 VND | 2,391,126 VND | 3,946,667 VND | 2,722,190 VND | 1,847,196 VND | 719,796 VND | 706,661 VND | 378,208 VND | 1,740,103 VND | 3,714,894 VND | 2,916,110 VND | 3,460,740 VND | 1,692,879 VND | 3,444,911 VND | 684,296 VND | 2,186,243 VND | 878,775 VND | 836,385 VND | 881,216 VND | 472,095 VND | 2,442,026 VND | 2,785,966 VND | 2,111,587 VND | 1,801,361 VND | 1,571,986 VND | 7,153,333 VND | 559,863 VND | 770,550 VND | 608,256 VND | 4,710,843 VND | 3,622,481 VND | 8,777,943 VND | ||
Days to ShipSố ngày giao hàng | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | Quote | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Quote | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 24 Day(s) or more | 24 Day(s) or more |
Hole diameter (drill diameter) D(mm) | 3 ~ 16 | 3 ~ 12 | 0.2 ~ 1.99 | 2 ~ 12 | 3 ~ 13 | 2 ~ 12 | 1 ~ 6 | 3 ~ 20 | 1.1 ~ 2.5 | 1 ~ 10.5 | 3 ~ 16 | 3 ~ 20 | - | 3 ~ 16 | 5 ~ 18.5 | 3.3 ~ 12 | 1 ~ 5.5 | 0.1 ~ 3 | 0.5 ~ 13 | 0.5 ~ 16 | 1 ~ 6 | 1 ~ 12 | 3 ~ 16 | 3 ~ 16 | 14 ~ 32 | 3.5 ~ 4.5 | 2 | 2 ~ 20 | 3.85 ~ 11.85 | 3 ~ 13 | 3 ~ 8 | 1 ~ 8 | 3 ~ 10 | 0 | 1 ~ 16 | 3.7 ~ 10 | 4 ~ 12.5 | 0.3 ~ 2 | 3 ~ 10 | .0.4 ~ 1 | 0.1 ~ 3 | 0.1 ~ 3 | 3 ~ 20 | 3 ~ 12 | 2.5 ~ 8 |
Overall Length L(mm) | 68 ~ 146 | 50 ~ 90 | 38 ~ 47 | 47 ~ 130 | 59 ~ 128 | 68 ~ 156 | 50 ~ 102 | 66 ~ 153 | 47 ~ 59 | 32 ~ 115 | 74 ~ 178 | 100 ~ 250 | - | 68 ~ 146 | 95 ~ 217 | 78 ~ 156 | 50 ~ 120 | 38 | 45 ~ 118 | 20 ~ 115 | 45 ~ 90 | 61 ~ 216 | 68 ~ 146 | 78 ~ 194 | - | 60 ~ 71 | 40 | 70 ~ 205 | - | 49 ~ 124 | 62 ~ 79 | 26 ~ 79 | 100 ~ 200 | 40 ~ 60 | 56 ~ 194 | 56 ~ 110 | 54 ~ 110 | 38 ~ 50 | 105 ~ 315 | 38 | 38 ~ 45 | 38 | 90 ~ 310 | 62 ~ 102 | 185 ~ 485 |
Groove Length L(mm) | 2 ~ 72 | 10 ~ 24 | 2.5 ~ 15 | 15 ~ 73 | 25 ~ 76 | 18 ~ 96 | 16 ~ 50 | 28 ~ 101 | 6.6 ~ 15 | 10 ~ 60 | 20 ~ 104 | 14 ~ 90 | - | 17 ~ 80 | 41 ~ 148 | 32 ~ 96 | 6 ~ 33 | 0.6 ~ 12 | 6 ~ 60 | 3 ~ 58 | 1 ~ 6 | 13 ~ 156 | 17 ~ 80 | 28 ~ 128 | - | 30 ~ 36 | 20 | 18 ~ 140 | - | 16 ~ 77 | 20 ~ 41 | 6 ~ 37 | 60 ~ 140 | 0 | 8 ~ 128 | 24 ~ 60 | 22 ~ 51 | 2.5 ~ 18 | 55 ~ 265 | 1.2 ~ 10 | 1 ~ 15 | 0.6 ~ 12 | 50 ~ 258 | 20 ~ 55 | 155 ~ 440 |
work material | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Aluminum[◎] / Copper[○] | Cast Iron[◎] / Aluminum[◎] / Copper[○] | Quenched and tempered steel[◎] / high hardness steel[◎] | Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] | Cast Iron[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | Quenched and tempered steel[◎] / high hardness steel[◎] | Quenched and tempered steel[◎] / high hardness steel[○/◎] / Machinable Ceramics[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○] | general steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] | - | general steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | Quenched and tempered steel[○] / high hardness steel[◎] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | - | - | - |
Shank Type | End Mill Shank / straight shank | - | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | - | - | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | Taper shank | straight shank | straight shank | straight shank | - | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | - |
Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
With/without Oil Hole | Available | NA | NA | NA | NA | NA | NA | Available | NA | NA | Available | Available / NA | NA | Available | Available | Available | NA | NA | NA | NA | NA | Available | Available | Available | - | NA | NA | Available | NA | NA | NA | NA | Available / NA | NA | Available | NA | NA | NA | Available | - | NA | NA | Available | NA | Available |
Coating Y/N | Available | NA | Available | Available | NA | Available | NA | Available | Available | Available | Available | Available | NA | Available | Available | Available | Available | Available | NA | NA | NA | Available | Available | Available | - | Available | Available | Available | Available | Available | Available | Available | Available | NA | Available | Available | Available | Available | NA | Available | Available | NA | Available | Available | Available |
Coating Type | Other | Non-Coated | Other | DLC | Non-Coated | Other | Non-Coated | Other | Other | TiAlN | Other | Other | - | Other | Other | Other | TiAlN | For General Steels (AlCrN, etc.) | Non-Coated | - | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiN | Other | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | - | Other | Other | Other | Other | Non-Coated | TiAlN | For General Steels (AlCrN, etc.) | Non-Coated | Other | TiAlN | Other |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy