(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
Straight Shank / End Mill Shank Drills (Carbide)（work material：Aluminum）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
165 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Carbide Flat Drill 2D Type_ADF-2D
OSG
[Features]· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.· The original bottom edge shape reduces the cutting resistance and achieves stable processing.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 50 ～ 140 10 ～ 88 Aluminum[○] End Mill Shank / straight shank Carbide NA Available Other From: 1,179,999 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
ATOM
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 13 30 ～ 100 4 ～ 50 Aluminum[◎] straight shank Carbide NA NA Non-Coated From: 399,336 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.5 ～ 20 47 ～ 145 1.65 ～ 90 Aluminum[○] End Mill Shank / straight shank Carbide NA Available Other From: 1,210,000 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Flat Drill - Long Shank 2D Type_ADFLS-2D
OSG
[Features]· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.· The original bottom edge shape reduces the cutting resistance and achieves stable processing.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 100 ～ 250 15 ～ 88 Aluminum[○] End Mill Shank / straight shank Carbide NA Available Other From: 1,663,333 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 5 38 ～ 64 0.6 ～ 26 Aluminum[◎] End Mill Shank / straight shank Carbide NA Available Other Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ATOM
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 13 40 ～ 149 8 ～ 70 Aluminum[◎] straight shank Carbide NA NA Non-Coated From: 419,012 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Sweep Cut Drill Reamer Type 3 mm Shank
ATOM
Sweep Cut Drills drastically reduce the burrs produced with through-holes. [Features] · Suppresses hole bending. · Suppresses runout of the drill bit when biting in, realizing high hole position and hole diameter accuracy.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 3 38 ～ 50 1.2 ～ 25 Aluminum[◎] End Mill Shank Carbide NA NA Non-Coated From: 1,349,299 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Semi-Long Blades
ATOM
A series that achieves stable long life developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.04 ～ 0.99 38 0.6 ～ 11 Aluminum[○] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: 854,549 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Short Blades
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 3 38 0.6 ～ 12 Aluminum[○] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: 719,796 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Standard Blade Length
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.03 ～ 3 38 ～ 50 0.3 ～ 25 Aluminum[○] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: 719,796 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-SUS-3D
OSG
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 3D type with oil hole
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2.8 ～ 20 66 ～ 165 17 ～ 100 Aluminum[○] End Mill Shank / straight shank Carbide Available Available Other From: 1,878,788 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Drill "NEO PRO" Long Blades
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.03 ～ 3 38 ～ 65 0.6 ～ 40 Aluminum[○] End Mill Shank Carbide NA Available For General Steels (AlCrN, etc.) From: 944,057 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D
OSG
[Features]· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 66 ～ 165 12 ～ 100 Aluminum[○] End Mill Shank Carbide Available Available Other From: 1,567,470 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ATOM
A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 3 38 0.6 ～ 12 Aluminum[◎] End Mill Shank Carbide NA NA Non-Coated From: 608,256 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-5D
OSG
[Features]· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 70 ～ 225 18 ～ 160 Aluminum[○] End Mill Shank Carbide Available Available Other From: 2,322,975 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Solid Drill with Coating
ATOM
ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 6 30 ～ 80 4 ～ 40 Aluminum[◎] straight shank Carbide NA Available TiAlN From: 468,586 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ATOM
ADS standard straight shank drill long type.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 13 60 ～ 200 10 ～ 90 Aluminum[◎] straight shank Carbide NA NA Non-Coated From: 564,388 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-SUS-5D
OSG
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 5D type with oil hole
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 20 70 ～ 205 18 ～ 140 Aluminum[○] End Mill Shank / straight shank Carbide Available Available Other From: 2,186,243 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Drill, Straight Shank / Regular
MISUMI
[Features]·Versatile uncoated carbide drill for a wide range of applications·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 7.5 34 ～ 109 12 ～ 69 Aluminum[○] straight shank Carbide NA NA - From: 319,248 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit
UNION TOOL
[Features]·UT microcoating.·Tip angle 150·Tool Material: Carbide
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.11 ～ 2.95 38 1.2 ～ 12 Aluminum[◎] End Mill Shank Carbide NA Available Other From: 521,503 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Starting AQDEXST
NACHI(FUJIKOSHI)
[Features]· Highly accurate positioning is possible with good bite.· A multi-function type capable of centering, chamfering and V-grooving.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 48 ～ 131 9 ～ 40 Aluminum[○] straight shank Carbide NA Available For General Steels (AlCrN, etc.) From: 1,418,252 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GUHRING
Achieves high-precision and long-life small diameter hole machining by adoption of base material with high breaking resistance and specialized coating ideal for small-diameter drills. The shank diameters are unified at φ3. Lineup featuring sizes in 1/100 increments.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 3 38 1.2 ～ 12 Aluminum[○] - Carbide NA Available TiAlN From: 814,025 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.[Features]· Allows high efficiency flat drilling up to hole depth 3D.· A drill with oil hole that supports stainless steel.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functiona...Readmore
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 68 ～ 146 2 ～ 72 Aluminum[○] End Mill Shank / straight shank Carbide Available Available Other From: 2,656,894 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
H.S.S Drill Taper Shank Long Series
YG 1
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 13.5 ～ 50 300 ～ 500 175 ～ 350 Aluminum[○] Taper shank High-speed steel NA Available Steam homo From: 2,019,390 VND Days to Ship: Số ngày giao hàng: 5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]· MUGEN flat drill bit makes drilling holes in inclined or curved surfaces easy.・ The thinning shape developed according to the size (spiral thinning (ø1 to ø2.9)/triple thinning (ø3 to ø6)), double margin (ø2.6 or more), and long neck shape ensure stable and accurate drilling operations.· MFD has a flat bottom flute that flattens out the bottoms of blind holes and is ideal for counterbore machining and thread cutting (thread milling) ...Readmore
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 1.9 55 2 ～ 11.8 Aluminum[◎] End Mill Shank Carbide NA Available TiAlN From: 997,254 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
UTDLX UT, Micro Coating Unimax Long Blade Drill Bit
UNION TOOL
[Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr heigh...Readmore
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 3 38 ～ 80 4.5 ～ 45 Aluminum[◎] End Mill Shank Carbide NA Available Other From: 848,058 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Features]・ A short type with a groove length that is 6 times the cutting diameter for stable machining. Uses thinning on the tip to reduce cutting force.・ Stable drilling precision. (ø0.02 or more)
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.01 ～ 0.05 40 0.06 ～ 0.3 Aluminum[◎] End Mill Shank Carbide NA NA - From: 2,203,652 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING Miniature Drill MDR-R
NS TOOL
[Features]・ MUGEN coating is used to achieve long lifespan and stable drilling.・ High-precision specifications suitable for precision part machining. Diameter tolerance 0 to -0.005 mm
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type .0.4 ～ 1 38 1.2 ～ 10 Aluminum[○] End Mill Shank Carbide - Available TiAlN From: 559,863 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Flat Long Shank AQDEXZLS
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Flat drill 10D type with excellent drilling performance.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functional drill that is capable of supporting a wide range of applications such as c...Readmore
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 100 ～ 250 14 ～ 90 Aluminum[○] End Mill Shank Carbide Available / NA Available Other From: 1,964,244 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pilot Drill for Extra Long Drill_ADO-PLT
OSG
[Features]· Carbide drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3.03 ～ 12.03 65 ～ 120 15 ～ 60 Aluminum[○] End Mill Shank Carbide Available Available Other From: 2,168,475 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Burnishing Drill, Straight Model
MISUMI
[Features]·Achieves high-precision drilling of aluminum without a pilot hole·Tip diameter can be specified in units of 0.01 mm and groove length in units of 0.1 mm
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0 40 ～ 60 0 Aluminum[◎] End Mill Shank Carbide NA NA - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A drill for high-speed wet machining and dry machining of aluminum alloys.[Features]· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.· Dry machining of aluminum alloy is possible.· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.· Allows also non-step boring of hole dep...Readmore
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 12 47 ～ 130 15 ～ 73 Aluminum[◎] End Mill Shank / straight shank Carbide NA Available DLC From: 889,172 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Carbide Drills for Non-Ferrous Metal_NF-GDN
OSG
It realizes high-speed drilling of aluminum castings, aluminum die-casts, and wrought aluminum materials that are frequently used in automobiles with high cost-effectiveness.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 13 59 ～ 128 25 ～ 76 Aluminum[◎] End Mill Shank / straight shank Carbide NA NA Non-Coated From: 605,000 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSDH Drill for Small Diameter High-Hardness Processing
NS TOOL
[Features]・ Drilling of hardened steel 65 HRC is possible with a small diameter drill bit.・ Achieves stable lifespan with little variation in hole diameter.・ High hardness material drilling is possible from ø0.1.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.1 ～ 1 45 0.2 ～ 2 Aluminum[○] End Mill Shank Carbide NA Available TiAlN From: 1,157,606 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
NSMD-MS MUGEN Micro Coating Micro Drill Short
NS TOOL
[Features]・ Short type with groove length 6 times the cutting diameter.・ By adopting a thin film coating dedicated for micro drill bits, it demonstrates excellent performance for drilling holes in stainless steel, etc.・ Uses thinning on the tip to reduce cutting force. Stable drilling precision. (ø0.02 or more)
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.01 ～ 0.05 40 0.06 ～ 0.3 Aluminum[○] End Mill Shank Carbide NA Available TiAlN From: 2,384,241 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 3D Type
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Cutting force is greatly reduced by using Aurora Coat (DLC coat) and low resistance WL (wide L) thinning.・ High quality drilling is possible by devising the cutting edge and adopting WW (wide W) margin.・ Stable and long lifespan is achieved by Aurora Coat and cutting edge shape.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 8 94 40 Aluminum[◎] straight shank Carbide Available Available DLC From: 3,694,695 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ATOM
ADS standard straight shank drill extra-long type.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 13 75 ～ 250 15 ～ 120 Aluminum[◎] straight shank Carbide NA NA Non-Coated From: 623,207 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ATOM
The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.035 ～ 1.995 38 ～ 50 0.4 ～ 22 Aluminum[◎] End Mill Shank Carbide NA NA Non-Coated From: 832,910 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill Shank Type 3 x D RT100U 5514
GUHRING
[Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 62 ～ 131 20 ～ 79 Aluminum[◎] End Mill Shank Carbide NA Available Other From: 1,631,592 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill Shank Type 5xD RT100U 5515
GUHRING
[Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 66 ～ 153 28 ～ 101 Aluminum[◎] End Mill Shank Carbide NA Available Other From: 1,907,196 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Mill Shank Drill 5 × D with Oil Hole RT100U 5511
GUHRING
[Features]· Internal lubrication enables high performance drilling without steps.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 66 ～ 153 28 ～ 101 Aluminum[◎] End Mill Shank Carbide Available Available Other From: 2,714,500 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
KYOWA SEIKO
The solid PCD cutting edge is spiral shaped. Machining is possible for non-ferrous metals through hard-to-cut materials such as ceramics.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.3 ～ 3 38 4 ～ 10 Aluminum[◎] End Mill Shank PCD NA NA - From: 11,179,180 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Flat Regular AQDEXZR
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.· Flat drill for 4D boring depth with excellent drilling performance.· A centering hole or guide hole is required.[Applications]· Countersinking on inclined surfac...Readmore
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 60 ～ 195 19 ～ 126 Aluminum[○] - Carbide - Available Other From: 1,686,673 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GP Carbide Drill (General Processing, 3D Type)
OSG KOREA CORP
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type - 53 ～ 131 14 ～ 79 Aluminum[○] straight shank Carbide NA Available - From: 403,782 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ATOM
Drill for precision and multiporous fine hole drilling with a minimum diameter of ø0.04 (diameter 0.04 mm). [Features] · Blade diameter tolerance +0 to -0.005. [Applications] · A wide range of materials are applicable, from general steel through to non-ferrous metals and resin.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.03 ～ 0.99 38 0.5 ～ 11 Aluminum[○] End Mill Shank Carbide NA NA Non-Coated From: 691,983 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.13
- 0.135
- 0.14
- 0.145
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.397
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.794
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1/2(inch)
- 1/4(inch)
- 1/8(inch)
- 1/16(inch)
- 1/32(inch)
- 1/64(inch)
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.191
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.587
- 1.59
- 1.595
- 1.6
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.984
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2.01
- 2.015
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.115
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.215
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.315
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.381
- 2.383
- 2.39
- 2.4
- 2.41
- 2.415
- 2.42
- 2.43
- 2.439
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.489
- 2.49
- 2.5
- 2.51
- 2.515
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.578
- 2.58
- 2.59
- 2.6
- 2.61
- 2.615
- 2.62
- 2.63
- 2.64
- 2.642
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.705
- 2.71
- 2.715
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.778
- 2.779
- 2.78
- 2.79
- 2.8
- 2.81
- 2.815
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.915
- 2.92
- 2.93
- 2.94
- 2.947
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3/8(inch)
- 3/16(inch)
- 3/32(inch)
- 3/64(inch)
- 3.01
- 3.02
- 3.03
- 3.04
- 3.048
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.264
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.455
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.571
- 3.572
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.658
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.734
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.969
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.039
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.176
- 4.18
- 4.19
- 4.2
- 4.21
- 4.217
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.366
- 4.366
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.623
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.762
- 4.763
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.837
- 4.84
- 4.85
- 4.852
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5/8(inch)
- 5/16(inch)
- 5/32(inch)
- 5/64(inch)
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.106
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.159
- 5.159
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.49999999999999
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.556
- 5.558
- 5.56
- 5.565
- 5.57
- 5.58
- 5.59
- 5.59999999999999
- 5.6
- 5.61
- 5.616
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.69999999999999
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.79999999999999
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.89999999999999
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.953
- 5.954
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.99
- 6
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.09999999999999
- 6.1
- 6.13
- 6.15
- 6.19999999999999
- 6.2
- 6.23
- 6.25
- 6.29999999999999
- 6.3
- 6.33
- 6.35
- 6.35
- 6.35 (¼")
- 6.365
- 6.375
- 6.39999999999999
- 6.4
- 6.43
- 6.45
- 6.48
- 6.49
- 6.49999999999999
- 6.5
- 6.51
- 6.52
- 6.528
- 6.53
- 6.55
- 6.59999999999999
- 6.6
- 6.63
- 6.65
- 6.69999999999999
- 6.7
- 6.73
- 6.746
- 6.747
- 6.75
- 6.8
- 6.83
- 6.85
- 6.89999999999999
- 6.9
- 6.93
- 6.95
- 6.98
- 6.99
-
7～7.99
- 7
- 7/16(inch)
- 7/32(inch)
- 7/64(inch)
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.09999999999999
- 7.1
- 7.13
- 7.14
- 7.144
- 7.145
- 7.15
- 7.19999999999999
- 7.2
- 7.23
- 7.25
- 7.29999999999999
- 7.3
- 7.33
- 7.35
- 7.36
- 7.38
- 7.39999999999999
- 7.4
- 7.43
- 7.45
- 7.48
- 7.49
- 7.49999999999999
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.541
- 7.541
- 7.55
- 7.59999999999999
- 7.6
- 7.63
- 7.65
- 7.69999999999999
- 7.7
- 7.73
- 7.75
- 7.79999999999999
- 7.8
- 7.83
- 7.85
- 7.89999999999999
- 7.9
- 7.93
- 7.937
- 7.938
- 7.94
- 7.95
- 7.953
- 7.98
- 7.99
-
8～8.99
- 8
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.09999999999999
- 8.1
- 8.13
- 8.15
- 8.19999999999999
- 8.2
- 8.23
- 8.25
- 8.29999999999998
- 8.3
- 8.33
- 8.334
- 8.35
- 8.39999999999998
- 8.4
- 8.43
- 8.433
- 8.45
- 8.48
- 8.49
- 8.5
- 8.50000000000001
- 8.51
- 8.52
- 8.53
- 8.55
- 8.58
- 8.59999999999998
- 8.6
- 8.63
- 8.65
- 8.69999999999998
- 8.7
- 8.73
- 8.731
- 8.733
- 8.75
- 8.79999999999998
- 8.8
- 8.80000000000001
- 8.83
- 8.85
- 8.89999999999998
- 8.9
- 8.90000000000001
- 8.93
- 8.95
- 8.98
- 8.99
-
9～9.99
- 9
- 9/16(inch)
- 9/32(inch)
- 9/64(inch)
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.09999999999998
- 9.1
- 9.128
- 9.129
- 9.13
- 9.15
- 9.19999999999998
- 9.2
- 9.20000000000001
- 9.21
- 9.23
- 9.24
- 9.25
- 9.26
- 9.29999999999998
- 9.3
- 9.30000000000001
- 9.33
- 9.347
- 9.35
- 9.36
- 9.38
- 9.39999999999998
- 9.4
- 9.40000000000001
- 9.43
- 9.45
- 9.48
- 9.49
- 9.49999999999998
- 9.5
- 9.50000000000001
- 9.51
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.59999999999998
- 9.6
- 9.60000000000001
- 9.63
- 9.65
- 9.69999999999998
- 9.7
- 9.70000000000001
- 9.73
- 9.75
- 9.79999999999998
- 9.8
- 9.80000000000001
- 9.83
- 9.85
- 9.89999999999998
- 9.9
- 9.90000000000001
- 9.92
- 9.921
- 9.922
- 9.93
- 9.95
- 9.97
- 9.98
- 9.99
-
10～10.99
- 10
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.13
- 10.15
- 10.2
- 10.23
- 10.25
- 10.3
- 10.319
- 10.32
- 10.33
- 10.35
- 10.4
- 10.43
- 10.45
- 10.48
- 10.49
- 10.5
- 10.51
- 10.52
- 10.53
- 10.55
- 10.6
- 10.63
- 10.65
- 10.7
- 10.716
- 10.716
- 10.72
- 10.73
- 10.75
- 10.8
- 10.83
- 10.85
- 10.9
- 10.93
- 10.95
- 10.98
- 10.99
-
11～11.99
- 11
- 11/32(inch)
- 11/64(inch)
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.112
- 11.113
- 11.13
- 11.133
- 11.15
- 11.2
- 11.22
- 11.23
- 11.24
- 11.25
- 11.3
- 11.33
- 11.35
- 11.36
- 11.38
- 11.4
- 11.43
- 11.45
- 11.48
- 11.49
- 11.5
- 11.509
- 11.509
- 11.51
- 11.52
- 11.53
- 11.55
- 11.56
- 11.6
- 11.63
- 11.65
- 11.7
- 11.73
- 11.75
- 11.8
- 11.83
- 11.85
- 11.9
- 11.906
- 11.908
- 11.91
- 11.93
- 11.95
- 11.98
- 11.99
-
12～12.99
- 12
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.15
- 12.2
- 12.25
- 12.3
- 12.303
- 12.304
- 12.35
- 12.4
- 12.45
- 12.48
- 12.49
- 12.5
- 12.51
- 12.52
- 12.55
- 12.6
- 12.65
- 12.7
- 12.7
- 12.75
- 12.8
- 12.85
- 12.9
- 12.95
- 12.96
- 12.98
- 12.99
-
13～13.9
- 13
- 13/32(inch)
- 13/64(inch)
- 13.096
- 13.097
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.49
- 13.494
- 13.5
- 13.5~25
- 13.55
- 13.6
- 13.7
- 13.8
- 13.89
- 13.891
- 13.891
- 13.9
-
14～14.96
- 14
- 14.1
- 14.2
- 14.25
- 14.287
- 14.288
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.684
- 14.684
- 14.7
- 14.75
- 14.8
- 14.9
- 14.96
-
15～15.9
- 15
- 15/32(inch)
- 15/64(inch)
- 15.083
- 15.1
- 15.2
- 15.25
- 15.3
- 15.4
- 15.479
- 15.5
- 15.55
- 15.6
- 15.7
- 15.75
- 15.8
- 15.875
- 15.875
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.271
- 16.3
- 16.4
- 16.5
- 16.6
- 16.67
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17/32(inch)
- 17/64(inch)
- 17.1
- 17.2
- 17.3
- 17.4
- 17.463
- 17.5
- 17.55
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.258
- 18.3
- 18.4
- 18.5
- 18.6
- 18.654
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19/64(inch)
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21/64(inch)
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23/64(inch)
- 23.5
-
24～24.5/24.7
- 24
- 24.5
- 24.5/24.7
-
25～25.5
- 25
- 25/64(inch)
- 25.5
-
26～26.5/26.7
- 26
- 26.5
- 26.5/26.7
-
27～27.5
- 27
- 27/64(inch)
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29/64(inch)
- 29.5
-
30～30.5
- 30
- 30.5
-
31～31.5
- 31
- 31/64(inch)
- 31.5
-
32～32.5
- 32
- 32.5
-
33～33.5
- 33
- 33/64(inch)
- 33.5
-
34～34.5
- 34
- 34.5
-
35～35.5
- 35
- 35/64(inch)
- 35.5
-
36～36.5
- 36
- 36.5
-
37～37.5
- 37
- 37/64(inch)
- 37.5
-
38～38.5
- 38
- 38.5
-
39～39.5
- 39
- 39.5
-
40～40.5
- 40
- 40.5
-
41～41.5
- 41
- 41.5
-
42～42.5
- 42
- 42.5
-
43～43.5
- 43
- 43.5
-
44～44.5
- 44
- 44.5
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50
-
-
Overall Length L(mm)
-
Groove Length L(mm)
-
0～0.99
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.36
- 0.4
- 0.42
- 0.44
- 0.48
- 0.5
- 0.54
- 0.55
- 0.6
- 0.66
- 0.7
- 0.77
- 0.8
- 0.88
- 0.9
- 0.99
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.97
- 2
- 2.1
- 2.2
- 2.3
- 2.31
- 2.4
- 2.5
- 2.6
- 2.64
- 2.7
- 2.8
- 2.9
- 2.97
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.8
- 31
- 31.2
- 31.5
- 31.7
- 31.8
-
32～32.8
- 32
- 32.3
- 32.4
- 32.8
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.4
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.2
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
140
-
143
-
144
-
145
-
146
-
148
-
149
-
150
-
152
-
153
-
154
-
155
-
156
-
159
-
160
-
161
-
162
-
163
-
165
-
167
-
168
-
169
-
170
-
171
-
173
-
175
-
176
-
177
-
180
-
182
-
183
-
184
-
185
-
188
-
189
-
190
-
195
-
196
-
197
-
198
-
200
-
205
-
207
-
208
-
210
-
212
-
214
-
215
-
216
-
218
-
219
-
220
-
223
-
224
-
225
-
227
-
230
-
231
-
232
-
234
-
240
-
242
-
248
-
250
-
252
-
253
-
258
-
260
-
263
-
264
-
265
-
270
-
272
-
274
-
277
-
280
-
282
-
290
-
292
-
295
-
300
-
302
-
310
-
315
-
318
-
322
-
323
-
327
-
330
-
337
-
340
-
343
-
350
-
360
-
372
-
385
-
400
-
402
-
432
-
440
-
460
-
512
-
550
-
692
-
860
-
1030
-
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
- Machinable Ceramics
-
Shank Type
-
End Mill Shank
-
straight shank
-
Taper shank
-
End Mill Shank
-
Tool Material Type
- High-speed steel
- Carbide
- PCD
-
With/without Oil Hole
-
Coating Y/N
- Available
- NA
-
Coating Type
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy