Phoenix Head Replaceable Type Drills

• You can add up to 6 items per a category to the compare list. Compare

  

  Pilot Drill

  TNC SHARK

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  6 ～ 10	30 ～ 35	-	-	-	Cobalt HSS	-	-	nano Dia

  From: 859,997 VND
  Days to Ship: Số ngày giao hàng: 18 Day(s)

  18 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Super U Drill (Corodrill 880)【1-10 Pieces Per Package】

  SANDVIK

  A Blade Tip Replacement Type Insert Drill With High Productivity

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  12.5 ～ 63	91 ～ 331	28 ～ 220	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	End Mill Shank / straight shank	-	NA	-	-

  From: 155,958 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SumiDrill WDX Type / PDL Type / PCT Type Insert WDXT-G

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ An insert for indexable drills.・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	-	-	-

  From: 170,752 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder 3 x D with Oil Hole RT800WP 5242

  GUHRING

  [Features]· Unique tip clamping method enables tips to be quickly and easily interchanged even within the machine.· Can always machine with a new cutting edge, so productivity and consistency are excellent, and cost reductions and simplified tool management can be achieved.· Internal oil supply type.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	130 ～ 231	76 ～ 167	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	-	-	Available	NA	-

  From: 13,334,988 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super U Drill - Hole Drilling Tip

  SANDVIK

  Ideal for machining requiring deep cutting and a highly rigid tip

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  12~13.5 ～ 53~63	-	-	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	-	-	-	-

  From: 401,701 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  WDX Drill, for 2D Machining Depth

  SUMITOMO ELECTRIC HARDMETAL

  SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13 ～ 68	88 ～ 246	29 ～ 144	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	-	-	Available	Available	TiAlN

  From: 8,293,697 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WDX Drill, for 4D Machining Depth

  SUMITOMO ELECTRIC HARDMETAL

  SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13 ～ 63	114 ～ 362	55 ～ 260	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	-	-	Available	Available	TiAlN

  From: 10,032,305 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super U Drill - Cylindrical Shank

  SANDVIK

  With an indexable drill, balanced cutting and table feed up to twice as high are possible through stepped biting at the entrance, improving the precision of the processed hole.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  12 ～ 12.7	125 ～ 129	63 ～ 66	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	End Mill Shank	-	NA	-	-

  From: 19,660,111 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Aqua Drill EX VF Tip TVF

  NACHI(FUJIKOSHI)

  A flat tip for indexable drills that is ideal for high-efficiency, high-precision machining of large diameters.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  14 ～ 32	-	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	-	Carbide	-	-	For General Steels (AlCrN, etc.)

  From: 1,692,879 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, 3/3.5 Series Holder, Morse Taper Shank

  NGK SPARK PLUG

  A holder for 3/3.5 Series Indexable Drills that excels in high-speed, high-feed machining, large-diameter, deep-hole machining, and low-resistance, high-precision machining.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  34.36 to 47.80	319.1 ～ 408	-	-	Taper shank	-	-	-	-

  From: 13,505,260 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WDX Drill, for 5D Machining Depth

  SUMITOMO ELECTRIC HARDMETAL

  SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13 ～ 36	127 ～ 278	68 ～ 184	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	-	-	Available	Available	TiAlN

  From: 10,901,805 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SumiDrill WDX Type / PDL Type / PCT Type Insert WDXT-H

  SUMITOMO ELECTRIC HARDMETAL

  An insert for indexable drills.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	-	-	-

  From: 181,890 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WDX Drill, for 3D Machining Depth

  SUMITOMO ELECTRIC HARDMETAL

  SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13 ～ 143	101 ～ 314	42 ～ 212	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	-	-	Available	Available	TiAlN

  From: 8,717,628 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Indexable Drill 2D Type P2D

  OSG

  Indexable drill that can stably perform hole drilling with 2D depth.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  21 ～ 33.5	121 ～ 160	-	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]	End Mill Shank	Carbide	Available	NA	Non-Coated

  From: 8,206,743 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Magic Drill DRA Type Tip

  KYOCERA

  It is an insert for MagicDrill DRA type that has high centripetal force with a special 2-step tip angle and achieves excellent cylindricity, roundness and surface roughness in steel machining.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  7.94 ～ 25.5	-	-	general steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎]	-	-	-	Available	-

  From: 1,399,565 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, Standard GEN2 3 Series Tip

  NGK SPARK PLUG

  NGK SPARK PLUG Tip (For Drill) Throwaway Drill Standard GEN2 Tip for 3 Series

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  35.5 ～ 47.5	-	-	general steel[○] / Cast Iron[○] / Titanium[○]	-	Powder high-speed steel	-	Available	For General Steels (AlCrN, etc.)

  From: 2,516,948 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroDrill 870, Drill Head

  SANDVIK

  Drill with replaceable head for machining deep holes or larger diameter holes.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	-	-	-	-	-	-

  From: 15,718,877 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aqua Drill EX VF 3D AQDEXVF3D

  NACHI(FUJIKOSHI)

  [Features]· It is capable of high-efficiency machining from steel to stainless steel.· Highly accurate in hole drilling and excellent in chipping resistance.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  14.0～14.5 ～ 31.6～32.0	113 ～ 206	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	straight shank	Carbide	Available	-	-

  From: 6,804,508 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aqua Drill EX VF 5D AQDEXVF5D

  NACHI(FUJIKOSHI)

  [Features]· It is capable of high-efficiency machining from steel to stainless steel.· Highly accurate in hole drilling and excellent in chipping resistance.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  14.0～14.5 ～ 31.6～32.0	145 ～ 277	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	straight shank	Carbide	Available	-	Non-Coated

  From: 7,779,017 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aqua Drill NWDX 4D

  NACHI(FUJIKOSHI)

  [Features]· Capable of stable drilling of general steel, stainless steel, etc. thanks to its excellent cutting balance.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13 ～ 55	114 ～ 325	55 ～ 225	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	straight shank	Carbide	Available	-	-

  From: 9,449,162 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Magic Drill Straight Shank SS-DRA Type (Machining Depth: 3 x D)

  KYOCERA

  [Features]· Low resistance design for improved hole accuracy· Thick holder core suppresses deflection· Cuts scrap into fine pieces· Simple tip replacement

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  7.94 to 8.49 ～ 25.00 to 25.50	92 ～ 174	-	-	End Mill Shank	-	Available	-	-

  From: 5,990,415 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Magic Drill Straight Shank SS-DRA Type (Machining Depth: 5 x D)

  KYOCERA

  [Features]· Low resistance design for improved hole accuracy· Thick holder core suppresses deflection· Cuts scrap into fine pieces· Simple tip replacement

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  7.94 to 8.49 ～ 25.00 to 25.50	99 ～ 226	-	-	End Mill Shank	-	Available	-	-

  From: 7,109,158 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Magic Drill Shank with Flange SF-DRA Type (Machining Depth: 8 x D)

  KYOCERA

  [Features]· Low resistance design for improved hole accuracy· Thick holder core suppresses deflection· Cuts scrap into fine pieces· Simple tip replacement

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  7.94 to 8.49 ～ 25.00 to 25.50	126 ～ 300	-	-	-	-	Available	-	-

  From: 9,035,883 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Drill-STD

  KOREATECHNICS

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  14 ～ 19	101 ～ 141	-	-	-	-	-	-	-

  From: 4,439,202 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 32 Series

  NGK SPARK PLUG

  [Features]· Achieves machining cost reductions through high speed, high feed, high efficiency, and scrap management· Larger scrap pocket· X thinning with excellent centripetality· Low resistance blade tip shape

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  32.00 to 35.00	227.7	-	-	straight shank	-	-	-	-

  From: 17,409,706 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 18 Series Tip

  NGK SPARK PLUG

  Inserts for GEN3 18 Series Indexable Drills that offer excellent cutting sharpness, can be used on machines with low horsepower and low rigidity, have excellent chip control, and do not require center hole drilling before drilling.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 3,167,955 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, 0/0.5 Series Holder, Metric Size Straight Shank

  NGK SPARK PLUG

  NGK Spark Plug Holder Throwaway Drill Holder for 0/0.5 Series Metric Size Straight Shank

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  12.98 to 17.65 ～ 15.50 to 17.65	97.6 ～ 466	-	-	straight shank	-	-	-	-

  From: 8,072,105 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, 4 Series Holder, Metric Size Straight Shank

  NGK SPARK PLUG

  NGK SPARK PLUG HOLDER Throwaway Drill Holder for 4 Series Metric Size Straight Shank

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  46.99 to 65.28	249.4 ～ 998.7	-	-	straight shank	-	-	-	-

  From: 12,419,585 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SumiDrill WDX Type / PDL Type / PCT Type Insert WDXT-L

  SUMITOMO ELECTRIC HARDMETAL

  An insert for indexable drills.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	-	-	-

  From: 181,890 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill, SMDH-B3 (for bridge)

  SUMITOMO ELECTRIC HARDMETAL

  A multi-drill (for bridges) for SMD Series that achieves secure and strong clamping through unique radial serration and adopts a special surface treatment with excellent abrasion resistance and rust prevention.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  24.5～24.7 ～ 26.5～26.7	170 ～ 175	87 ～ 92	general steel[○]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 10,233,352 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill, SMDH-D, for 8D

  SUMITOMO ELECTRIC HARDMETAL

  A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13.5 or more and 14.5 or less ～ Over 41.0, and 42.5 or less	191.5 ～ 460	124.5 ～ 360	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 11,601,537 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill, SMDH-L, for 5D

  SUMITOMO ELECTRIC HARDMETAL

  A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  12.0 or more, less than 12.5 ～ Over 41.0, and 42.5 or less	130 ～ 335	69 ～ 235	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 9,069,559 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill, SMDH-M, for 3D

  SUMITOMO ELECTRIC HARDMETAL

  A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  12.5 or more, less than 13.0 ～ Over 41.0, and 42.5 or less	105 ～ 250	44 ～ 150	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 8,048,584 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill, SMDT-MEL Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ A highly precise and high-strength head replacement drill bit with radial serrations.・ Uses a special surface treatment that excels in abrasion resistance and rust prevention.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.・ The large thinning angle solves the defect of convex radius part peculiar to mild steel. With SUS material, welding defects at various parts are reduced.・ It improves the cutting performance of the outer periphery and prevents the occurrence of edge chipping at the cast iron hole exit.[Applications]・ Ideal for mild steel, gray cast iron, low rigidity equipment and difficult-to-cut materials such as stainless steel.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  19.5 ～ 22	-	-	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 2,223,753 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill Head SMDT-MTL

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ A highly precise and high-strength head replacement drill bit with radial serrations.・ Uses a special surface treatment that excels in abrasion resistance and rust prevention.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.・ The large cutting edge treatment reduces damage to the cutting edge.・ With X-type thinning, stable drilling is achieved with excellent centripetal force when biting.[Applications]・ Ideal for high efficiency machining of general steel.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  17 ～ 23.5	-	-	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 2,058,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TA-EZ Drill TEZD-MS Type

  DIJET

  [Features]Tips for exchanging cuttings type drills with easy tip replacement and excellent cutting performance.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  14 ～ 32	-	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	-	-	-	Available	Other

  From: 1,929,425 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 4111

  GUHRING

  It is an insert for pilot hole with 145° tip angle.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	-	-	Carbide	NA	Available	Other

  From: 2,173,853 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 4112

  GUHRING

  A widely applicable insert used for materials from general steel to stainless steel.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○]	-	Carbide	NA	Available	Other

  From: 2,300,946 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 4113

  GUHRING

  Insert dedicated for cast iron.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Cast Iron[○]	-	Carbide	NA	Available	Other

  From: 2,402,541 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 4114

  GUHRING

  [Features]· Insert dedicated for aluminum.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Aluminum[○]	-	Carbide	NA	NA	-

  From: 1,970,265 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 4115

  GUHRING

  [Features]· A dedicated insert for use with stainless steel.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○]	-	Carbide	NA	Available	Other

  From: 2,580,631 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 7632

  GUHRING

  Chamfer blade insert for cast iron.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	-	-	Carbide	NA	Available	TiAlN

  From: 1,045,946 VND
  Days to Ship: Số ngày giao hàng: 26 Day(s) or more

  26 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 7635

  GUHRING

  Insert for chamfering blades for aluminum.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	-	-	Carbide	NA	NA	-

  From: 893,751 VND
  Days to Ship: Số ngày giao hàng: 26 Day(s) or more

  26 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 7645

  GUHRING

  An insert for chamfering blade which can be widely applied from general steel to stainless steel.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	-	-	Carbide	NA	Available	TiN

  From: 1,045,946 VND
  Days to Ship: Số ngày giao hàng: 26 Day(s) or more

  26 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for RT800WP Only 2485

  GUHRING

  FIRE coated RT blade tip dedicated for RT800WP.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  34 ～ 40.5	-	-	-	-	Carbide	NA	Available	Other

  From: 4,118,717 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	TNC SHARK	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	GUHRING	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SANDVIK	NACHI(FUJIKOSHI)	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	OSG	KYOCERA	NGK SPARK PLUG	SANDVIK	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	KYOCERA	KYOCERA	KYOCERA	KOREATECHNICS	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	DIJET	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING
Product SeriesDòng sản phẩm	Pilot Drill	Super U Drill (Corodrill 880)【1-10 Pieces Per Package】	SumiDrill WDX Type / PDL Type / PCT Type Insert WDXT-G	Holder 3 x D with Oil Hole RT800WP 5242	Super U Drill - Hole Drilling Tip	WDX Drill, for 2D Machining Depth	WDX Drill, for 4D Machining Depth	Super U Drill - Cylindrical Shank	Aqua Drill EX VF Tip TVF	Throw-Away Drill, 3/3.5 Series Holder, Morse Taper Shank	WDX Drill, for 5D Machining Depth	SumiDrill WDX Type / PDL Type / PCT Type Insert WDXT-H	WDX Drill, for 3D Machining Depth	Indexable Drill 2D Type P2D	Magic Drill DRA Type Tip	Throw-Away Drill, Standard GEN2 3 Series Tip	CoroDrill 870, Drill Head	Aqua Drill EX VF 3D AQDEXVF3D	Aqua Drill EX VF 5D AQDEXVF5D	Aqua Drill NWDX 4D	Magic Drill Straight Shank SS-DRA Type (Machining Depth: 3 x D)	Magic Drill Straight Shank SS-DRA Type (Machining Depth: 5 x D)	Magic Drill Shank with Flange SF-DRA Type (Machining Depth: 8 x D)	Insert Drill-STD	Throw-Away Drill, GEN3 32 Series	Throw-Away Drill, GEN3 18 Series Tip	Throw-Away Drill, 0/0.5 Series Holder, Metric Size Straight Shank	Throw-Away Drill, 4 Series Holder, Metric Size Straight Shank	SumiDrill WDX Type / PDL Type / PCT Type Insert WDXT-L	SEC-Multi Drill, SMDH-B3 (for bridge)	SEC-Multi Drill, SMDH-D, for 8D	SEC-Multi Drill, SMDH-L, for 5D	SEC-Multi Drill, SMDH-M, for 3D	SEC-Multi Drill, SMDT-MEL Type	SEC-Multi Drill Head SMDT-MTL	TA-EZ Drill TEZD-MS Type	Tip for HT800WP Only 4111	Tip for HT800WP Only 4112	Tip for HT800WP Only 4113	Tip for HT800WP Only 4114	Tip for HT800WP Only 4115	Tip for HT800WP Only 7632	Tip for HT800WP Only 7635	Tip for HT800WP Only 7645	Tip for RT800WP Only 2485
From	859,997 VND	155,958 VND	170,752 VND	13,334,988 VND	401,701 VND	8,293,697 VND	10,032,305 VND	19,660,111 VND	1,692,879 VND	13,505,260 VND	10,901,805 VND	181,890 VND	8,717,628 VND	8,206,743 VND	1,399,565 VND	2,516,948 VND	15,718,877 VND	6,804,508 VND	7,779,017 VND	9,449,162 VND	5,990,415 VND	7,109,158 VND	9,035,883 VND	4,439,202 VND	17,409,706 VND	3,167,955 VND	8,072,105 VND	12,419,585 VND	181,890 VND	10,233,352 VND	11,601,537 VND	9,069,559 VND	8,048,584 VND	2,223,753 VND	2,058,015 VND	1,929,425 VND	2,173,853 VND	2,300,946 VND	2,402,541 VND	1,970,265 VND	2,580,631 VND	1,045,946 VND	893,751 VND	1,045,946 VND	4,118,717 VND
Days to ShipSố ngày giao hàng	18 Day(s)	Same day or more	6 Day(s) or more	8 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	5 Day(s) or more	14 Day(s) or more	14 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	26 Day(s) or more	26 Day(s) or more	26 Day(s) or more	8 Day(s) or more
Hole diameter (drill diameter) D(mm)	6 ～ 10	12.5 ～ 63	-	-	12~13.5 ～ 53~63	13 ～ 68	13 ～ 63	12 ～ 12.7	14 ～ 32	34.36 to 47.80	13 ～ 36	-	13 ～ 143	21 ～ 33.5	7.94 ～ 25.5	35.5 ～ 47.5	-	14.0～14.5 ～ 31.6～32.0	14.0～14.5 ～ 31.6～32.0	13 ～ 55	7.94 to 8.49 ～ 25.00 to 25.50	7.94 to 8.49 ～ 25.00 to 25.50	7.94 to 8.49 ～ 25.00 to 25.50	14 ～ 19	32.00 to 35.00	-	12.98 to 17.65 ～ 15.50 to 17.65	46.99 to 65.28	-	24.5～24.7 ～ 26.5～26.7	13.5 or more and 14.5 or less ～ Over 41.0, and 42.5 or less	12.0 or more, less than 12.5 ～ Over 41.0, and 42.5 or less	12.5 or more, less than 13.0 ～ Over 41.0, and 42.5 or less	19.5 ～ 22	17 ～ 23.5	14 ～ 32	-	-	-	-	-	-	-	-	34 ～ 40.5
Overall Length L(mm)	30 ～ 35	91 ～ 331	-	130 ～ 231	-	88 ～ 246	114 ～ 362	125 ～ 129	-	319.1 ～ 408	127 ～ 278	-	101 ～ 314	121 ～ 160	-	-	-	113 ～ 206	145 ～ 277	114 ～ 325	92 ～ 174	99 ～ 226	126 ～ 300	101 ～ 141	227.7	-	97.6 ～ 466	249.4 ～ 998.7	-	170 ～ 175	191.5 ～ 460	130 ～ 335	105 ～ 250	-	-	-	-	-	-	-	-	-	-	-	-
Groove Length L(mm)	-	28 ～ 220	-	76 ～ 167	-	29 ～ 144	55 ～ 260	63 ～ 66	-	-	68 ～ 184	-	42 ～ 212	-	-	-	-	-	-	55 ～ 225	-	-	-	-	-	-	-	-	-	87 ～ 92	124.5 ～ 360	69 ～ 235	44 ～ 150	-	-	-	-	-	-	-	-	-	-	-	-
work material	-	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	-	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]	general steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎]	general steel[○] / Cast Iron[○] / Titanium[○]	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	-	-	-	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○]	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	-	general steel[○]	Cast Iron[○]	Aluminum[○]	Stainless Steel[○]	-	-	-	-
Shank Type	-	End Mill Shank / straight shank	-	-	-	-	-	End Mill Shank	-	Taper shank	-	-	-	End Mill Shank	-	-	-	straight shank	straight shank	straight shank	End Mill Shank	End Mill Shank	-	-	straight shank	-	straight shank	straight shank	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tool Material Type	Cobalt HSS	-	-	-	-	-	-	-	Carbide	-	-	-	-	Carbide	-	Powder high-speed steel	-	Carbide	Carbide	Carbide	-	-	-	-	-	Carbide	-	-	-	-	-	-	-	-	-	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
With/without Oil Hole	-	NA	-	Available	-	Available	Available	NA	-	-	Available	-	Available	Available	-	-	-	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	-	NA	NA	NA	NA	NA	NA	NA	NA	NA
Coating Y/N	-	-	-	NA	-	Available	Available	-	-	-	Available	-	Available	NA	Available	Available	-	-	-	-	-	-	-	-	-	Available	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	NA	Available	Available	NA	Available	Available
Coating Type	nano Dia	-	-	-	-	TiAlN	TiAlN	-	For General Steels (AlCrN, etc.)	-	TiAlN	-	TiAlN	Non-Coated	-	For General Steels (AlCrN, etc.)	-	-	Non-Coated	-	-	-	-	-	-	For General Steels (AlCrN, etc.)	-	-	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Other	Other	Other	Other	-	Other	TiAlN	-	TiN	Other

Loading...Tải…