Screw-Hole-Related Tools（work material：Low-Carbon Steel (carbon alloy less than 0.25%) Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap for Steel HRT

  OSG

  Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10UN ～ M6	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[○/◎]	0.3 ～ 32	High-speed steel	Roll tap	For blind hole	2.5P ～ 4P	Non-Coated	NA	34 ～ 62

  From: 226,030 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Seamless TAFLET

  TANOI MFG

  Rise tap with a correct bite without pitch or angle errors.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M20	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 2.5	High-speed steel	Roll tap	-	1P ～ 2P	TiCN	Available	40 ～ 105

  From: 942,443 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps, Oxidized_PO-OX

  YAMAWA MFG

  Point taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil, reducing frictional resistance.· This prevents parts welding together and improves the finished surface roughness of the female thread.· Oxide treatment is also effective for removing residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such a...Readmore

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.6 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○/◎]	0.35 ～ 3	High-speed steel	Point tap	For through hole	5P	-	NA	36 ～ 120

  From: 120,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Hand Taps for Taper Pipe Threads, Long (ℓg) Type_PT

  YAMAWA MFG

  A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1'-11 ～ 7/8-14	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	-	High-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	-	NA	55 ～ 145

  From: 409,830 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap TiN Coating TIN-SFT

  OSG

  Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.3 ～ 3	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	TiN	Available	34 ～ 120

  From: 488,333 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for General Application (with OX)_EX-H-SFT

  OSG

  Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M33	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 3	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	40 ～ 120

  From: 211,666 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT

  OSG

  It is suitable for cases where tap damage due to cutting chip clogging at the blind hole and gnawing, etc., of female threads are likely to occur.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2.6 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.45 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	44 ～ 75

  From: 238,216 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Tap (for Metric Screws/HSS-E)

  TRUSCO NAKAYAMA

  [Features]· Can be used for both through holes and blind holes.[Applications]· Work materials: General steel, low/medium carbon steel, alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Hand Tap	For through hole / For blind hole	1.5P ～ 9P	Non-Coated	NA	46 ～ 95

  From: 158,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Re-threading Die For Gas Pipe (PT Screw)

  TRUSCO NAKAYAMA

  [Features]· Used when cleaning out bolts/screws.· To be used when modifying screw threads.· Work can be done using a monkey wrench.· This product can be used in place of a round die when modifying the screw thread ridges.[Applications]· For fixing PT (tapered) thread.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R7/8	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Alloy HSS	Die	-	-	-	-	-

  From: 745,018 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pg Conduit Thread Tap (German Standard)

  SKC

  It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  PG7 ～ PG42	Other	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	16 ～ 20	High-speed steel	Tap for pipes	-	-	-	-	85 ～ 135

  From: 2,264,998 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Left Hand Threads_SP-LH

  YAMAWA MFG

  * N-SP(LH) will switch to SP(LH) as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/2-13UNC ～ M30	Meter / unified / Whitworth	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 3.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 135

  From: 228,258 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Plus Series Spiral Fluted Taps_+SP

  YAMAWA MFG

  A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 1	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 62

  From: 147,422 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP

  YAMAWA MFG

  Coated spiral tap that can machine at medium to high speed for a wide range of work materials.[Features]· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.· Completely threaded to prevent the blade from chipping.· Reduction of friction resistance and tapping torque.· Maintains screw guidance (stable machining).· Maintai...Readmore

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 1.75	High-speed steel	Spiral Tap	For blind hole	2.5P	TiN	Available	42 ～ 82

  From: 449,897 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooveless Tap Series, X Performer Long Shank LT-S-XPF

  OSG

  Compared to cutting taps, carbon steel and steel alloys have less cutting chipping troubles and can be machined for a longer lifespan. It is especially effective for processing steel forged parts related to automobiles.[Specifications]・ Shape: Forming tap・ Screw type: Metric・ Work Material: Low carbon steel (C content less than 0.25%): most suitable / medium carbon steel (C content 0.25 to 0.45%): most suitable / high carbon steel (C conte...Readmore

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 1.75	Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	-	Other	Available	80 ～ 150

  From: 704,256 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap Handle K-438A

  HOZAN

  A reliable tap wrench for stable tapping.[Features]· A standard tap handle.[Applications]· Convenient for drilling work.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	-	High-speed steel	Tap wrench	For through hole / For blind hole	-	-	NA	210

  From: 375,340 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  EX-LT-SFT Long Shank for General Purpose/ EX-LT-H-SFT Coating Treatment Long Shank for General Purpose

  OSG KOREA CORP

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For through hole / For blind hole	2.5	Homo	Available	80 ～ 200

  From: 464,306 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NPT Screw National Pipe Thread Taper Tap T2527

  YG 1

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  NPT 1/2 ～ NPT 1/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	14 ～ 27	Vanadium High-Speed Steel	Tap for pipes	For blind hole	3	-	NA	55 ～ 80

  From: 742,185 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

  MISUMI

  The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 1.75	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	58 ～ 73

  From: 7,894,879 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS Coated Carbide Threading Cutter, for Internal Metric Threads

  MISUMI

  [Features]··Carbide thread mill cutter capable of high-speed stable machining·Can be used for both blind holes and through holes··It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 1.75	Carbide	Thread cutter	For through hole / For blind hole	-	For High Hardness (Silicon Group)	Available	48 ～ 74

  From: 5,701,428 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MT Series High-Speed Steel Spiral Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.4 ～ 3	Cobalt HSS	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	40 ～ 120

  From: 210,191 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap K-437【1-3 Pieces Per Package】

  HOZAN

  Set of three hand taps including tip, medium, and upper.[Features]· 3-piece set of tip, middle and top.· The size ranges from M2 to M6 (K-437-2/3/4/5/6).[Applications]· Ideal for tapping metal parts.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 1	High-speed steel	Hand Tap	For through hole / For blind hole	-	-	NA	-

  From: 252,194 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Spiral Flute Tap, Stainless Steel, GSPS8M/-12M/-16M

  NACHI(FUJIKOSHI)

  Coating tap suitable for stainless steel and places prone to chip clogging.[Features]· Adopts powdered high-speed steel with excellent wear resistance.· Tap with TiN coating on the surface and stable service life due to high-speed and high-efficiency threading.· A thick neck, which eliminates chipping and wrapping of chips, has been adopted.[Applications]· Coating tap suitable for stainless steel and places prone to chip clogging.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	1.25 ～ 2	Alloy HSS	Spiral Tap	For blind hole	2.5P	TiN	Available	70 ～ 95

  From: 642,486 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap TiN coated with Long Shank_TIN-LT-SFT

  OSG

  It is suitable for tapping low/medium carbon steel and stainless steel using a water-soluble cutting oil for applications where the thread length is 2D or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	TiN	Available	100 ～ 150

  From: 638,355 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap High-Speed Synchronizing Tap HS-SFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M5 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.8 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	TiN	Available	60 ～ 75

  From: 748,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated_TIN-TPT

  OSG

  A TiN coating with excellent chip-weld resistance and abrasion resistance is applied.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	55 ～ 95

  From: 935,836 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap for General Application (with OX)_H-TPT

  OSG

  Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1/8 ～ R1/16	Taper for Pipe	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	28	High-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	55

  From: 605,306 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Tap (for Metric Screws/SKS)

  TRUSCO NAKAYAMA

  [Features]· Use when manufacturing or cleaning out screw holes.· For coarse screw thread ridge repair and manufacture.[Applications]· Work materials: Iron, light metal.· Creation and correction of coarse screw threads.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.4 ～ 2	Alloy HSS	Hand Tap	-	1.5P ～ 9P	Non-Coated	NA	40 ～ 95

  From: 88,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IT-Toughlet C Coated

  TANOI MFG

  Rise tap with a correct bite without pitch or angle errors.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.2 ～ 1.5	High-speed steel	Roll tap	-	1P ～ 4P	Other	Available	30 ～ 75

  From: 597,018 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Oversize Hand Tap

  SKC

  [Applications]It can be used for machining larger diameter threaded holes than usual in plating and heat treatment processes.[Features]High speed steel with excellent heat resistance and thermal damage resistance is used.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  W1 ～ M48	Meter / Whitworth	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.5 ～ 20	-	Hand Tap	-	1.5P ～ 9P	-	-	46 ～ 185

  From: 328,324 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Tap for Gas Pipes

  SKC

  [Applications]It can be used to tap thread holes in gas pipes.[Features]High speed steel with excellent heat resistance and thermal damage resistance is used.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  G1 ～ R7/8	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	11 ～ 28	-	Tap for pipes	-	-	-	-	54 ～ 120

  From: 338,816 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

  YAMAWA MFG

  The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.2 ～ 1	Powder high-speed steel	Roll tap	For blind hole	1P	TiCN	Available	36 ～ 62

  From: 597,733 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Roll Taps, Coated_R+V

  YAMAWA MFG

  A coating roll tap suitable for threading steel and nonferrous materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.25 ～ 1	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiN	Available	36 ～ 62

  From: 377,150 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Roll Taps for Dry Tapping, Coated_OL+RZ

  YAMAWA MFG

  It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10 ～ M6	Meter / unified	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	0.25 ～ 64	Powder high-speed steel	Roll tap	For through hole	4P	TiCN	Available	36 ～ 62

  From: 393,122 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Round Die For Whitworth Screws

  TRUSCO NAKAYAMA

  Dimensional adjustments can be made with the adjustment screw provided. · Can also be used to modify screw threads. · Iron and light metal. · For male threading.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  W1 ～ W7/8	Whitworth	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	12 ～ 40	Alloy HSS	Die	-	-	-	-	-

  From: 546,683 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PF Screw Pipe Thread Parallel Tap T2562

  YG 1

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  PF 3/4 ～ PF 3/8	Parallel for Pipes	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	14 ～ 19	High-speed steel	Tap for pipes	For blind hole	3.5	-	NA	65 ～ 85

  From: 1,033,614 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

  MISUMI

  Threading cutters that enable the high-speed stable processing are available at special prices

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 2.5	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	57 ～ 115

  From: 2,989,799 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

  MISUMI

  [Features]·Small diameter thread cutting from M1.4 × 0.3 (Pilot hole diameter ø1.1 mm) is possible·Reduced cutting load due to short flute length (3 ridges)·Enables effective thread cutting to corners of blind holes

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M20	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.3 ～ 2.5	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	39 ～ 105

  From: 6,588,067 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taflet for Steel TFST

  NACHI(FUJIKOSHI)

  A rise up type tap that does not expel chips.[Features]· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.· It does not produce chips.· Less inconsistent screw precision.· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.[Applications]· Suitable for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.3 ～ 1.5	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	-	NA	34 ～ 75

  From: 275,556 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Spiral Flute Tap, GSP5M/GSP8M

  NACHI(FUJIKOSHI)

  From general steel to difficult-to-cut materials, this coated tap allows high-speed, high-efficiency threading of blind holes.[Features]· A tap that adopts powdered high-speed steel with excellent wear resistance and has a TiN coated surface.· It has a stable life using high-speed, high-precision threading.· Special relief prevents over-cutting due to excessive advancement of the tap.[Applications]· High-speed, high-efficiency threading of through...Readmore

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	1.5	Alloy HSS	Spiral Tap	For blind hole	2.5P	TiN	Available	75

  From: 770,550 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank for Taflet Steel TFSTL

  NACHI(FUJIKOSHI)

  A roll type tap that does not expel chips.[Features]· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.[Applications]· Ideal for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.· For standard dimensions, it is convenient when the protrusion length is insufficient.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 1.5	High-speed steel	Roll tap	For blind hole	2P	-	NA	70 ～ 150

  From: 455,602 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Mild Steels and Deep Holes with Long Shank_LT-MS-DH-SFT

  OSG

  It is suitable for cases where tap damage due to cutting chip clogging at the blind hole and gnawing, etc., of female threads are likely to occur.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	1	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	120

  From: 487,077 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap Series V Coating V-POT

  OSG

  Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 1.75	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiCN	Available	46 ～ 82

  From: 546,666 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap V coated with Long Shank_V-LT-POT

  OSG

  Can be widely applied from flexible materials to rigid materials. Especially, it shows excellent performance under high speed and high dilution (water-soluble cutting oil) tapping conditions. Also effective for dry tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.7 ～ 1	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiCN	Available	100

  From: 711,530 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap_HS-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	6P	TiN	Available	46 ～ 88

  From: 550,224 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

  OSG

  Dedicated to machines with a complete lead feed mechanism, suitable for high-speed, high-precision thread machining.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	5P	TiN	Available	46 ～ 88

  From: 663,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	TANOI MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	HOZAN	OSG KOREA CORP	YG 1	MISUMI	MISUMI	MISUMI	HOZAN	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	TRUSCO NAKAYAMA	TANOI MFG	SKC	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	TRUSCO NAKAYAMA	YG 1	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG
Product SeriesDòng sản phẩm	Grooveless Tap for Steel HRT	Seamless TAFLET	Spiral Pointed Taps, Oxidized_PO-OX	Hand Taps for Taper Pipe Threads, Long (ℓg) Type_PT	Spiral Tap TiN Coating TIN-SFT	Spiral Tap for General Application (with OX)_EX-H-SFT	Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT	Hand Tap (for Metric Screws/HSS-E)	Hexagonal Re-threading Die For Gas Pipe (PT Screw)	Pg Conduit Thread Tap (German Standard)	Spiral Fluted Taps for Left Hand Threads_SP-LH	Plus Series Spiral Fluted Taps_+SP	Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP	Grooveless Tap Series, X Performer Long Shank LT-S-XPF	Tap Handle K-438A	EX-LT-SFT Long Shank for General Purpose/ EX-LT-H-SFT Coating Treatment Long Shank for General Purpose	NPT Screw National Pipe Thread Taper Tap T2527	TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads	TS Coated Carbide Threading Cutter, for Internal Metric Threads	MT Series High-Speed Steel Spiral Tap	Tap K-437【1-3 Pieces Per Package】	G Spiral Flute Tap, Stainless Steel, GSPS8M/-12M/-16M	Spiral Tap TiN coated with Long Shank_TIN-LT-SFT	Spiral Tap High-Speed Synchronizing Tap HS-SFT	Taper Pipe Thread Tap TiN coated_TIN-TPT	Taper Pipe Thread Tap for General Application (with OX)_H-TPT	Hand Tap (for Metric Screws/SKS)	IT-Toughlet C Coated	Oversize Hand Tap	Tap for Gas Pipes	Torqueless Roll Taps with Short Chamfer_SC-TL-RZ	Roll Taps, Coated_R+V	Roll Taps for Dry Tapping, Coated_OL+RZ	Round Die For Whitworth Screws	PF Screw Pipe Thread Parallel Tap T2562	TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads	TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)	Taflet for Steel TFST	G Spiral Flute Tap, GSP5M/GSP8M	Long Shank for Taflet Steel TFSTL	Spiral Tap for Mild Steels and Deep Holes with Long Shank_LT-MS-DH-SFT	Pointed Tap Series V Coating V-POT	Pointed Tap V coated with Long Shank_V-LT-POT	LH Spiral SYNCHRO Tap_HS-RFT	LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT
From	226,030 VND	942,443 VND	120,394 VND	409,830 VND	488,333 VND	211,666 VND	238,216 VND	158,000 VND	745,018 VND	2,264,998 VND	228,258 VND	147,422 VND	449,897 VND	704,256 VND	375,340 VND	464,306 VND	742,185 VND	7,894,879 VND	5,701,428 VND	210,191 VND	252,194 VND	642,486 VND	638,355 VND	748,333 VND	935,836 VND	605,306 VND	88,000 VND	597,018 VND	328,324 VND	338,816 VND	597,733 VND	377,150 VND	393,122 VND	546,683 VND	1,033,614 VND	2,989,799 VND	6,588,067 VND	275,556 VND	770,550 VND	455,602 VND	487,077 VND	546,666 VND	711,530 VND	550,224 VND	663,593 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	8 Day(s) or more	Same day or more	5 Day(s) or more	6 Day(s) or more	9 Day(s)	4 Day(s) or more	5 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	6 Day(s) or more	17 Day(s) or more	6 Day(s) or more	17 Day(s)	Same day or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s)	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Same day	6 Day(s) or more	17 Day(s)	14 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Screw size (Nominal)	No.10UN ～ M6	M2 ～ M20	M1.6 ～ M24	1'-11 ～ 7/8-14	M1.4 ～ M24	M2 ～ M33	M2.6 ～ M10	M3 ～ M16	R1 ～ R7/8	PG7 ～ PG42	1/2-13UNC ～ M30	M2 ～ M6	M2 ～ M12	M3 ～ M12	-	M2 ～ M16	NPT 1/2 ～ NPT 1/8	M2 ～ M12	M3 ～ M12	M2 ～ M24	M2 ～ M6	M8 ～ M16	M3 ～ M16	M5 ～ M10	R1 ～ R3/8	R1/8 ～ R1/16	M2 ～ M16	M1 ～ M10	W1 ～ M48	G1 ～ R7/8	M1 ～ M6	M1 ～ M6	No.10 ～ M6	W1 ～ W7/8	PF 3/4 ～ PF 3/8	M3 ～ M20	M1.4 ～ M20	M1.4 ～ M10	M10	M3 ～ M10	M6	M3 ～ M12	M4 ～ M6	M3 ～ M14	M3 ～ M14
Screw Types	Meter / unified	Meter	Meter	Taper for Pipe	Meter	Meter	Meter	Meter	-	Other	Meter / unified / Whitworth	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Meter	Meter	Meter / Whitworth	-	Meter	Meter	Meter / unified	Whitworth	Parallel for Pipes	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○/◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○/◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎]
Pitch (P), Number of Threading(mm)	0.3 ～ 32	0.4 ～ 2.5	0.35 ～ 3	-	0.3 ～ 3	0.4 ～ 3	0.45 ～ 1.5	0.5 ～ 2	11 ～ 28	16 ～ 20	0.4 ～ 3.5	0.4 ～ 1	0.4 ～ 1.75	0.5 ～ 1.75	-	0.4 ～ 2	14 ～ 27	0.4 ～ 1.75	0.5 ～ 1.75	0.4 ～ 3	0.4 ～ 1	1.25 ～ 2	0.5 ～ 2	0.8 ～ 1.5	11 ～ 28	28	0.4 ～ 2	0.2 ～ 1.5	0.5 ～ 20	11 ～ 28	0.2 ～ 1	0.25 ～ 1	0.25 ～ 64	12 ～ 40	14 ～ 19	0.5 ～ 2.5	0.3 ～ 2.5	0.3 ～ 1.5	1.5	0.5 ～ 1.5	1	0.5 ～ 1.75	0.7 ～ 1	0.5 ～ 2	0.5 ～ 2
Tool Material Type	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Alloy HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	Cobalt HSS	High-speed steel	Alloy HSS	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	Alloy HSS	High-speed steel	-	-	Powder high-speed steel	High-speed steel	Powder high-speed steel	Alloy HSS	High-speed steel	Carbide	Carbide	High-speed steel	Alloy HSS	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel
Tap Type	Roll tap	Roll tap	Point tap	Tap for pipes	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Die	Tap for pipes	Spiral Tap	Spiral Tap	Spiral Tap	Roll tap	Tap wrench	Spiral Tap	Tap for pipes	Thread cutter	Thread cutter	Spiral Tap	Hand Tap	Spiral Tap	Spiral Tap	Spiral Tap	Tap for pipes	Tap for pipes	Hand Tap	Roll tap	Hand Tap	Tap for pipes	Roll tap	Roll tap	Roll tap	Die	Tap for pipes	Thread cutter	Thread cutter	Roll tap	Spiral Tap	Roll tap	Spiral Tap	Point tap	Point tap	Point tap	Point tap
Hole type	For blind hole	-	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	-	-	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	-	-	-	For blind hole	For through hole / For blind hole	For through hole	-	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole	For through hole	For through hole
Chamfer threads (Lcf)	2.5P ～ 4P	1P ～ 2P	5P	2.5P	2.5P	2.5P	2.5P	1.5P ～ 9P	-	-	2.5P	2.5P	2.5P	-	-	2.5	3	-	-	2.5P	-	2.5P	2.5P	3P	2.5P	2.5P	1.5P ～ 9P	1P ～ 4P	1.5P ～ 9P	-	1P	2P ～ 4P	4P	-	3.5	-	-	2P ～ 4P	2.5P	2P	2.5P	5P	5P	6P	5P
Coating Type	Non-Coated	TiCN	-	-	TiN	Non-Coated	Non-Coated	Non-Coated	-	-	-	-	TiN	Other	-	Homo	-	TiAlN	For High Hardness (Silicon Group)	Non-Coated	-	TiN	TiN	TiN	TiN	Non-Coated	Non-Coated	Other	-	-	TiCN	TiN	TiCN	-	-	TiAlN	TiAlN	-	TiN	-	Non-Coated	TiCN	TiCN	TiN	TiN
Coating Y/N	NA	Available	NA	NA	Available	NA	NA	NA	-	-	NA	NA	Available	Available	NA	Available	NA	Available	Available	NA	NA	Available	Available	Available	Available	NA	NA	Available	-	-	Available	Available	Available	-	NA	Available	Available	NA	Available	NA	NA	Available	Available	Available	Available
Overall Length (L)(mm)	34 ～ 62	40 ～ 105	36 ～ 120	55 ～ 145	34 ～ 120	40 ～ 120	44 ～ 75	46 ～ 95	-	85 ～ 135	42 ～ 135	42 ～ 62	42 ～ 82	80 ～ 150	210	80 ～ 200	55 ～ 80	58 ～ 73	48 ～ 74	40 ～ 120	-	70 ～ 95	100 ～ 150	60 ～ 75	55 ～ 95	55	40 ～ 95	30 ～ 75	46 ～ 185	54 ～ 120	36 ～ 62	36 ～ 62	36 ～ 62	-	65 ～ 85	57 ～ 115	39 ～ 105	34 ～ 75	75	70 ～ 150	120	46 ～ 82	100	46 ～ 88	46 ～ 88

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	TANOI MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	HOZAN	OSG KOREA CORP	YG 1	MISUMI	MISUMI	MISUMI	HOZAN	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	TRUSCO NAKAYAMA	TANOI MFG	SKC	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	TRUSCO NAKAYAMA	YG 1	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG
Product SeriesDòng sản phẩm	Grooveless Tap for Steel HRT	Seamless TAFLET	Spiral Pointed Taps, Oxidized_PO-OX	Hand Taps for Taper Pipe Threads, Long (ℓg) Type_PT	Spiral Tap TiN Coating TIN-SFT	Spiral Tap for General Application (with OX)_EX-H-SFT	Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT	Hand Tap (for Metric Screws/HSS-E)	Hexagonal Re-threading Die For Gas Pipe (PT Screw)	Pg Conduit Thread Tap (German Standard)	Spiral Fluted Taps for Left Hand Threads_SP-LH	Plus Series Spiral Fluted Taps_+SP	Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP	Grooveless Tap Series, X Performer Long Shank LT-S-XPF	Tap Handle K-438A	EX-LT-SFT Long Shank for General Purpose/ EX-LT-H-SFT Coating Treatment Long Shank for General Purpose	NPT Screw National Pipe Thread Taper Tap T2527	TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads	TS Coated Carbide Threading Cutter, for Internal Metric Threads	MT Series High-Speed Steel Spiral Tap	Tap K-437【1-3 Pieces Per Package】	G Spiral Flute Tap, Stainless Steel, GSPS8M/-12M/-16M	Spiral Tap TiN coated with Long Shank_TIN-LT-SFT	Spiral Tap High-Speed Synchronizing Tap HS-SFT	Taper Pipe Thread Tap TiN coated_TIN-TPT	Taper Pipe Thread Tap for General Application (with OX)_H-TPT	Hand Tap (for Metric Screws/SKS)	IT-Toughlet C Coated	Oversize Hand Tap	Tap for Gas Pipes	Torqueless Roll Taps with Short Chamfer_SC-TL-RZ	Roll Taps, Coated_R+V	Roll Taps for Dry Tapping, Coated_OL+RZ	Round Die For Whitworth Screws	PF Screw Pipe Thread Parallel Tap T2562	TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads	TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)	Taflet for Steel TFST	G Spiral Flute Tap, GSP5M/GSP8M	Long Shank for Taflet Steel TFSTL	Spiral Tap for Mild Steels and Deep Holes with Long Shank_LT-MS-DH-SFT	Pointed Tap Series V Coating V-POT	Pointed Tap V coated with Long Shank_V-LT-POT	LH Spiral SYNCHRO Tap_HS-RFT	LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

Loading...Tải…