Screw-Hole-Related Tools（work material：Quenched and tempered steel (25 to 35 HRC)）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  Hand Taps_HT

  YAMAWA MFG

  Hand tap used for general tapping work.[Features]・ High blade tip strength makes it easy for regrinding.・ More suitable for manual work compared to taps of other shapes.・ 2 types are available, with 5P or 1.5P chamfered threads.・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.・ Machining with mechanical machinery is also possible.・ Has straight grooves out of consideration for cutting chip stow.・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.[Applications]・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.0 ～ M48	Meter / unified / Sewing Machine	Quenched and tempered steel (25 to 35 HRC)[○]	0.2 ～ 100	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	36 ～ 185

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

  OSG

  With powder metal high-speed steel and special thread specifications, long-lifespan machining is possible with a wide range of work materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.2UN ～ M12	Meter / unified	Quenched and tempered steel (25 to 35 HRC)[○]	0.25 ～ 56	Powder high-speed steel	Roll tap	For blind hole	2P ～ 4P	TiCN	Available	30 ～ 82

  From: 510,341 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Tap TiN coated_TIN-HT

  OSG

  It has excellent cutting edge strength and is suitable for high hardness materials that do not connect cutting chips.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 3	Vanadium High-Speed Steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	TiN	Available	40 ～ 120

  From: 432,192 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  Hand Taps for Stainless Steels_SU-HT

  YAMAWA MFG

  Hand tap suitable for machining extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.· Capable of machining both synchronously and asynchronously.· Machining speed of 5 m/min or less is recommended.[Applications]Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/4-28UNF ～ M30	Meter / unified / Whitworth	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 3.5	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 4P	-	NA	42 ～ 135

  From: 125,309 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  Spiral Fluted Taps_SP

  YAMAWA MFG

  The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10 ～ M48	Meter / unified / Whitworth / Sewing Machine	Quenched and tempered steel (25 to 35 HRC)[○]	0.25 ～ 64	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	36 ～ 195

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap_HS-RFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M14	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Point tap	For through hole	6P	TiN	Available	46 ～ 88

  From: 550,224 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps for Parallel Pipe Threads_PF

  YAMAWA MFG

  The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 ～ 7/8	Parallel for Pipes	Quenched and tempered steel (25 to 35 HRC)[○]	11 ～ 28	High-speed steel	Tap for pipes	For through hole / For blind hole	1.5P ～ 3.5P	-	NA	55 ～ 105

  From: 426,094 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

  MISUMI

  [Features]·Versatile tap that can handle all work materials from general steel, heat-treated steel to stainless steel·Efficient cutting chip discharge by short thread shape and special flute shape

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.4 ～ 1.75	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	40 ～ 82

  From: 1,191,082 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps, Oxidized_SP-OX

  YAMAWA MFG

  Spiral taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.· Oxide treatment also removes residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10 ～ M30	Meter / unified / Whitworth	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 24	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 135

  From: 145,946 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Spiral Tap SGSP

  NACHI(FUJIKOSHI)

  [Features]·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditions

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.25 ～ 3	Alloy HSS	Spiral Tap	For through hole / For blind hole	1.5 ～ 2.5	TiCN	Available	40 ～ 120

  From: 460,667 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MT Series High-Speed Steel Spiral Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 3	Cobalt HSS	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	40 ～ 120

  From: 210,191 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  Spiral Pointed Taps_PO

  YAMAWA MFG

  A point tap convenient for through-hole machining as scraps are ejected forward.[Features]· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.· Minimal scrap issues.· Low cutting torque.· Capable of machining both synchronously and asynchronously.[Applications]· Ideal for machining through-holes.* N-PO models will transition to PO as soon as stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10 ～ M48	Meter / unified / Whitworth / Sewing Machine	Quenched and tempered steel (25 to 35 HRC)[○]	0.25 ～ 64	High-speed steel	Point tap	For through hole	5P	-	NA	36 ～ 185

  From: 140,051 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Fluted Taps_LS-SP

  YAMAWA MFG

  * LS-N-SP will switch to LS-SP as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 ～ M36	Meter / unified / Whitworth	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 24	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	70 ～ 300

  From: 283,784 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fluteless Tap (X Performer)_S-XPF

  OSG

  There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M45	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.2 ～ 4.5	Powder high-speed steel / Vanadium High-Speed Steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiCN	Available	30 ～ 220

  From: 620,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps, Oxidized_PO-OX

  YAMAWA MFG

  Point taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil, reducing frictional resistance.· This prevents parts welding together and improves the finished surface roughness of the female thread.· Oxide treatment is also effective for removing residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M24	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.7 ～ 3	High-speed steel	Point tap	For through hole	5P	-	NA	52 ～ 120

  From: 311,748 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps for Left Hand Threads_HT-LH

  YAMAWA MFG

  It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M30	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.3 ～ 3.5	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	36 ～ 135

  From: 180,180 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Spiral Tap_CPM-SFT

  OSG

  Work material ideal for forging high carbon steel, tool steel, steel alloy, or blind hole drilling with a hardness of 20 to 35 HRC for tempering

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.6 ～ M30	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.35 ～ 3.5	Powder high-speed steel	Spiral Tap	For blind hole	3P	Non-Coated	NA	36 ～ 135

  From: 285,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointed Tap for Difficult-To-Cut Materials CPM-POT

  OSG

  Ideal for forging high carbon steel, tool steel, steel alloy, or through hole drilling with a hardness of 20 to 45 HRC for work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M14	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.3 ～ 2	Powder high-speed steel	Point tap	For through hole	5P	Non-Coated	NA	34 ～ 88

  From: 275,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Hand Taps_LS-HT

  YAMAWA MFG

  It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 ～ M48	Meter / unified	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 24	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	70 ～ 300

  From: 455,100 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  Hand Taps for Hard-to-Machine Materials_EH-HT

  YAMAWA MFG

  Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M30	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 3.5	Cobalt HSS	Hand Tap	For through hole / For blind hole	2.5P ～ 5P	-	NA	46 ～ 135

  From: 178,530 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  MT Series High-Speed Steel Point Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 3	Cobalt HSS	Point tap	For through hole	5P	Non-Coated	NA	40 ～ 120

  From: 187,044 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Straight Flutes Tap_CPM-HT

  OSG

  Work material ideal for forging high carbon steel, tool steel, steel alloy, or female thread machining with a hardness of 20 to 45 HRC for tempering

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M48	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.5 ～ 5	Powder high-speed steel	Hand Tap	For through hole / For blind hole	2P ～ 5P	Non-Coated	NA	46 ～ 185

  From: 298,620 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Parallel Pipe Thread Tap_CPM-SPT

  OSG

  The work material is ideal for female threading of high carbon steel, tool steel, or tempered material with hardness of about 20 to 45 HRC

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  G1/8	Parallel for Pipes	Quenched and tempered steel (25 to 35 HRC)[◎]	28	Powder high-speed steel	Tap for pipes	For through hole / For blind hole	4P	Non-Coated	NA	55

  From: 760,806 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Left Hand Threads_SP-LH

  YAMAWA MFG

  * N-SP(LH) will switch to SP(LH) as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/2-13UNC ～ M30	Meter / unified / Whitworth	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 3.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 135

  From: 228,258 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP

  YAMAWA MFG

  Coated spiral tap that can machine at medium to high speed for a wide range of work materials.[Features]· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.· Completely threaded to prevent the blade from chipping.· Reduction of friction resistance and tapping torque.· Maintains screw guidance (stable machining).· Maintains excellent chip discharge performance (smooth discharge).[Applications]· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.· Ideal for water soluble cutting fluids.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 1.75	High-speed steel	Spiral Tap	For blind hole	2.5P	TiN	Available	42 ～ 82

  From: 449,897 VND
  Special Price
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

  MISUMI

  Threading cutters that enable the high-speed stable processing are available at special prices

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 2.5	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	57 ～ 115

  From: 2,989,799 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Pointed Tap with Long Shank_CPM-LT-POT

  OSG

  Ideal for forging high carbon steel, tool steel, steel alloy, or through hole drilling with a hardness of 20 to 45 HRC for work materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M16	Meter	Quenched and tempered steel (25 to 35 HRC)[◎]	0.7 ～ 2	Powder high-speed steel	Point tap	For through hole	5P	Non-Coated	NA	100 ～ 150

  From: 509,110 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MMTS Micro Threading Tool

  NS TOOL

  [Features]・ Female threads with a nominal diameter of 0.1 mm can be machined.・ Helical thread-machining is performed, and the tool diameter is smaller than the pilot hole diameter, so it can be taken out and reworked when broken.・ A long lifespan is achieved by using MUGEN coating.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  S0.1 ～ S1.4	Other	Quenched and tempered steel (25 to 35 HRC)[◎]	0.025 ～ 0.3	Carbide	Thread cutter	-	-	TiAlN	Available	45

  From: 1,842,278 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps for American Parallel Pipe Threads_NPS

  YAMAWA MFG

  ■ The NPS tap is a hand tap for American parallelpipe threads and is used for products whosemain purpose is the tightness of the threadedpart in connecting pipe parts and the like.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/2-14 ～ 1/8-27	Parallel for Pipes	Quenched and tempered steel (25 to 35 HRC)[○]	-	High-speed steel	Tap for pipes	For through hole / For blind hole	5P	-	NA	55 ～ 80

  From: 888,573 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Plus Series Spiral Fluted Taps_+SP

  YAMAWA MFG

  A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.4 ～ 1	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 62

  From: 147,422 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Left Hand Threads_PO-LH

  YAMAWA MFG

  Point tap suitable for machining through holes.[Features]· The grooves on the cutting edge side of the biting part are cut obliquely to push the chips forward.· Causes less trouble due to chips.· The cutting torque is low.[Applications]· Can process both synchronously and asynchronously.· Suitable for drilling through holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/2-20UNF ～ M30	Meter / unified / Whitworth	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 3	High-speed steel	Point tap	For through hole	5P	-	NA	46 ～ 135

  From: 309,680 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Point Tap SGPO

  NACHI(FUJIKOSHI)

  [Features]・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M24	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.25 ～ 3	High-speed steel	Point tap	For through hole	5	TiCN	Available	34 ～ 120

  From: 504,001 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

  OSG

  Dedicated to machines with a complete lead feed mechanism, suitable for high-speed, high-precision thread machining.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M30	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 3.5	Vanadium High-Speed Steel	Point tap	For through hole	6P	TiN	Available	100 ～ 200

  From: 843,803 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Hand Taps for Parallel Pipe Threads_LS-PF

  YAMAWA MFG

  The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 ～ 3/8	Parallel for Pipes	Quenched and tempered steel (25 to 35 HRC)[○]	11 ～ 28	High-speed steel	Tap for pipes	For through hole / For blind hole	3.5P	-	NA	100 ～ 200

  From: 1,150,820 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Hand Taps for Parallel Pipe Threads_LS-PS

  YAMAWA MFG

  The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 ～ 3/8	Parallel for Pipes	Quenched and tempered steel (25 to 35 HRC)[○]	11 ～ 28	High-speed steel	Tap for pipes	For through hole / For blind hole	3.5P	-	NA	100 ～ 200

  From: 1,150,820 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

  YAMAWA MFG

  Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M24	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 3	Cobalt HSS	Point tap	For through hole	4.5P	-	NA	46 ～ 120

  From: 296,533 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SU Roll Tap for SURZ Metric Screw Thread

  YAMAWA MFG

  [Features]· A roll tap which realizes control of the inner diameter shape of female screws.[Applications]· Work materials: Stainless steel, carbon steel, alloy steel, and tool steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5	Powder high-speed steel	Roll tap	For through hole / For blind hole	2P	TiCN	Available	46

  From: 779,599 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS Coated Carbide Threading Cutter, for Internal Metric Threads

  MISUMI

  [Features]··Carbide thread mill cutter capable of high-speed stable machining·Can be used for both blind holes and through holes··It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 1.75	Carbide	Thread cutter	For through hole / For blind hole	-	For High Hardness (Silicon Group)	Available	48 ～ 74

  From: 5,701,428 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series MC - Planet Cutter PNGT

  OSG

  If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / Taper for Pipe / Parallel for Pipes	Quenched and tempered steel (25 to 35 HRC)[○]	1 ～ 19	Cobalt HSS	Thread cutter	For through hole / For blind hole	-	TiN	Available	80 ～ 210

  From: 6,905,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pipe Thread Tap TiN coated_TIN-TPT

  OSG

  A TiN coating with excellent chip-weld resistance and abrasion resistance is applied.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Quenched and tempered steel (25 to 35 HRC)[○]	11 ～ 28	Vanadium High-Speed Steel	Tap for pipes	For through hole / For blind hole	2.5P	TiN	Available	55 ～ 95

  From: 935,836 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT

  OSG

  Work material ideal for forging high carbon steel, tool steel, steel alloy, or female thread machining with a hardness of 20 to 45 HRC for tempering

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  R1 ～ R3/8	Taper for Pipe	Quenched and tempered steel (25 to 35 HRC)[◎]	11 ～ 19	Powder high-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	Non-Coated	NA	62 ～ 95

  From: 1,369,978 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Thread Mills for Metric Internal Threads_MC-HLC

  YAMAWA MFG

  A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1015 ～ 32506N300M	Meter / Taper for Pipe / Parallel for Pipes	Quenched and tempered steel (25 to 35 HRC)[○]	-	Cobalt HSS	Thread cutter	-	-	TiN	Available	70 ～ 200

  From: 7,843,266 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps for Left Hand Threads_PO-V

  YAMAWA MFG

  Coated point tap suitable for low carbon steel to high carbon steel machining.[Features]· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 1.75	High-speed steel	Point tap	For through hole	5P	TiN	Available	46 ～ 82

  From: 436,914 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Titanium Alloys_ZET-B

  YAMAWA MFG

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 2.5	Powder high-speed steel	Spiral Tap	For blind hole	3P	-	NA	46 ～ 105

  From: 407,291 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Fluted Taps, Coated_LS-SP-V

  YAMAWA MFG

  * LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Quenched and tempered steel (25 to 35 HRC)[○]	0.5 ～ 1.75	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	100 ～ 150

  From: 703,398 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	YAMAWA MFG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	OSG	YAMAWA MFG	MISUMI	YAMAWA MFG	NACHI(FUJIKOSHI)	MISUMI	YAMAWA MFG	YAMAWA MFG	OSG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	MISUMI	OSG	OSG	YAMAWA MFG	YAMAWA MFG	MISUMI	OSG	NS TOOL	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	NACHI(FUJIKOSHI)	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	MISUMI	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product SeriesDòng sản phẩm	Hand Taps_HT	CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT	Straight Flutes Tap TiN coated_TIN-HT	Hand Taps for Stainless Steels_SU-HT	Spiral Fluted Taps_SP	LH Spiral SYNCHRO Tap_HS-RFT	Hand Taps for Parallel Pipe Threads_PF	Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】	Spiral Fluted Taps, Oxidized_SP-OX	SG Spiral Tap SGSP	MT Series High-Speed Steel Spiral Tap	Spiral Pointed Taps_PO	Long Shank Spiral Fluted Taps_LS-SP	Fluteless Tap (X Performer)_S-XPF	Spiral Pointed Taps, Oxidized_PO-OX	Hand Taps for Left Hand Threads_HT-LH	CPM Spiral Tap_CPM-SFT	Pointed Tap for Difficult-To-Cut Materials CPM-POT	Long Shank Hand Taps_LS-HT	Hand Taps for Hard-to-Machine Materials_EH-HT	MT Series High-Speed Steel Point Tap	CPM Straight Flutes Tap_CPM-HT	CPM Parallel Pipe Thread Tap_CPM-SPT	Spiral Fluted Taps for Left Hand Threads_SP-LH	Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP	TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads	CPM Pointed Tap with Long Shank_CPM-LT-POT	MMTS Micro Threading Tool	Hand Taps for American Parallel Pipe Threads_NPS	Plus Series Spiral Fluted Taps_+SP	Spiral Pointed Taps for Left Hand Threads_PO-LH	SG Point Tap SGPO	LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT	Long Shank Hand Taps for Parallel Pipe Threads_LS-PF	Long Shank Hand Taps for Parallel Pipe Threads_LS-PS	Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO	SU Roll Tap for SURZ Metric Screw Thread	TS Coated Carbide Threading Cutter, for Internal Metric Threads	Planet Cutter Series MC - Planet Cutter PNGT	Taper Pipe Thread Tap TiN coated_TIN-TPT	Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT	Thread Mills for Metric Internal Threads_MC-HLC	Spiral Pointed Taps for Left Hand Threads_PO-V	Spiral Fluted Taps for Titanium Alloys_ZET-B	Long Shank Spiral Fluted Taps, Coated_LS-SP-V
From		510,341 VND	432,192 VND	125,309 VND Special Price On Sale Till 31/03/2025		550,224 VND	426,094 VND	1,191,082 VND	145,946 VND	460,667 VND	210,191 VND	140,051 VND Special Price On Sale Till 31/03/2025	283,784 VND	620,000 VND	311,748 VND	180,180 VND	285,000 VND	275,000 VND	455,100 VND	178,530 VND Special Price On Sale Till 31/03/2025	187,044 VND Special Price On Sale Till 31/03/2025	298,620 VND	760,806 VND	228,258 VND	449,897 VND Special Price On Sale Till 31/03/2025	2,989,799 VND	509,110 VND	1,842,278 VND	888,573 VND	147,422 VND	309,680 VND	504,001 VND	843,803 VND	1,150,820 VND	1,150,820 VND	296,533 VND	779,599 VND	5,701,428 VND	6,905,394 VND	935,836 VND	1,369,978 VND	7,843,266 VND	436,914 VND	407,291 VND	703,398 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	6 Day(s) or more	9 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	Same day or more	Same day or more	4 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	9 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	17 Day(s)	8 Day(s) or more	5 Day(s) or more	4 Day(s) or more	6 Day(s) or more	12 Day(s)	Same day or more	Same day or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	9 Day(s)	8 Day(s) or more	9 Day(s)	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more
Screw size (Nominal)	No.0 ～ M48	No.2UN ～ M12	M2 ～ M24	1/4-28UNF ～ M30	No.10 ～ M48	M3 ～ M14	1 ～ 7/8	M2 ～ M12	No.10 ～ M30	M2 ～ M24	M2 ～ M24	No.10 ～ M48	1 ～ M36	M1 ～ M45	M4 ～ M24	M1.4 ～ M30	M1.6 ～ M30	M1.4 ～ M14	1 ～ M48	M3 ～ M30	M2 ～ M24	M3 ～ M48	G1/8	1/2-13UNC ～ M30	M2 ～ M12	M3 ～ M20	M4 ～ M16	S0.1 ～ S1.4	1/2-14 ～ 1/8-27	M2 ～ M6	1/2-20UNF ～ M30	M1.4 ～ M24	M3 ～ M30	1 ～ 3/8	1 ～ 3/8	M3 ～ M24	M3	M3 ～ M12	-	R1 ～ R3/8	R1 ～ R3/8	1015 ～ 32506N300M	M3 ～ M12	M3 ～ M20	M3 ～ M12
Screw Types	Meter / unified / Sewing Machine	Meter / unified	Meter	Meter / unified / Whitworth	Meter / unified / Whitworth / Sewing Machine	Meter	Parallel for Pipes	Meter	Meter / unified / Whitworth	Meter	Meter	Meter / unified / Whitworth / Sewing Machine	Meter / unified / Whitworth	Meter	Meter	Meter	Meter	Meter	Meter / unified	Meter	Meter	Meter	Parallel for Pipes	Meter / unified / Whitworth	Meter	Meter	Meter	Other	Parallel for Pipes	Meter	Meter / unified / Whitworth	Meter	Meter	Parallel for Pipes	Parallel for Pipes	Meter	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Taper for Pipe	Taper for Pipe	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter	Meter
work material	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[◎]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]	Quenched and tempered steel (25 to 35 HRC)[○]
Pitch (P), Number of Threading(mm)	0.2 ～ 100	0.25 ～ 56	0.4 ～ 3	0.4 ～ 3.5	0.25 ～ 64	0.5 ～ 2	11 ～ 28	0.4 ～ 1.75	0.4 ～ 24	0.25 ～ 3	0.4 ～ 3	0.25 ～ 64	0.5 ～ 24	0.2 ～ 4.5	0.7 ～ 3	0.3 ～ 3.5	0.35 ～ 3.5	0.3 ～ 2	0.5 ～ 24	0.5 ～ 3.5	0.4 ～ 3	0.5 ～ 5	28	0.4 ～ 3.5	0.4 ～ 1.75	0.5 ～ 2.5	0.7 ～ 2	0.025 ～ 0.3	-	0.4 ～ 1	0.5 ～ 3	0.25 ～ 3	0.5 ～ 3.5	11 ～ 28	11 ～ 28	0.5 ～ 3	0.5	0.5 ～ 1.75	1 ～ 19	11 ～ 28	11 ～ 19	-	0.5 ～ 1.75	0.5 ～ 2.5	0.5 ～ 1.75
Tool Material Type	High-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	High-speed steel	Powder high-speed steel	High-speed steel	Alloy HSS	Cobalt HSS	High-speed steel	High-speed steel	Powder high-speed steel / Vanadium High-Speed Steel	High-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	Carbide	Powder high-speed steel	Carbide	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Cobalt HSS	Powder high-speed steel	Carbide	Cobalt HSS	Vanadium High-Speed Steel	Powder high-speed steel	Cobalt HSS	High-speed steel	Powder high-speed steel	High-speed steel
Tap Type	Hand Tap	Roll tap	Hand Tap	Hand Tap	Spiral Tap	Point tap	Tap for pipes	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Roll tap	Point tap	Hand Tap	Spiral Tap	Point tap	Hand Tap	Hand Tap	Point tap	Hand Tap	Tap for pipes	Spiral Tap	Spiral Tap	Thread cutter	Point tap	Thread cutter	Tap for pipes	Spiral Tap	Point tap	Point tap	Point tap	Tap for pipes	Tap for pipes	Point tap	Roll tap	Thread cutter	Thread cutter	Tap for pipes	Tap for pipes	Thread cutter	Point tap	Spiral Tap	Spiral Tap
Hole type	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole	For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole	-	For through hole / For blind hole	For blind hole	For through hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	For through hole	For blind hole	For blind hole
Chamfer threads (Lcf)	1.5P ～ 5P	2P ～ 4P	1.5P ～ 5P	1.5P ～ 4P	2.5P	6P	1.5P ～ 3.5P	2.5P	2.5P	1.5 ～ 2.5	2.5P	5P	2.5P	2P ～ 4P	5P	1.5P ～ 5P	3P	5P	1.5P ～ 5P	2.5P ～ 5P	5P	2P ～ 5P	4P	2.5P	2.5P	-	5P	-	5P	2.5P	5P	5	6P	3.5P	3.5P	4.5P	2P	-	-	2.5P	2.5P	-	5P	3P	2.5P
Coating Type	-	TiCN	TiN	-	-	TiN	-	-	-	TiCN	Non-Coated	-	-	TiCN	-	-	Non-Coated	Non-Coated	-	-	Non-Coated	Non-Coated	Non-Coated	-	TiN	TiAlN	Non-Coated	TiAlN	-	-	-	TiCN	TiN	-	-	-	TiCN	For High Hardness (Silicon Group)	TiN	TiN	Non-Coated	TiN	TiN	-	-
Coating Y/N	NA	Available	Available	NA	NA	Available	NA	NA	NA	Available	NA	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	NA	Available	NA	NA	NA	Available	Available	NA	NA	NA	Available	Available	Available	Available	NA	Available	Available	NA	NA
Overall Length (L)(mm)	36 ～ 185	30 ～ 82	40 ～ 120	42 ～ 135	36 ～ 195	46 ～ 88	55 ～ 105	40 ～ 82	42 ～ 135	40 ～ 120	40 ～ 120	36 ～ 185	70 ～ 300	30 ～ 220	52 ～ 120	36 ～ 135	36 ～ 135	34 ～ 88	70 ～ 300	46 ～ 135	40 ～ 120	46 ～ 185	55	42 ～ 135	42 ～ 82	57 ～ 115	100 ～ 150	45	55 ～ 80	42 ～ 62	46 ～ 135	34 ～ 120	100 ～ 200	100 ～ 200	100 ～ 200	46 ～ 120	46	48 ～ 74	80 ～ 210	55 ～ 95	62 ～ 95	70 ～ 200	46 ～ 82	46 ～ 105	100 ～ 150

Loading...Tải…