Spiral Taps（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P

  YAMAWA MFG

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	0.5 ～ 2.5	Powder high-speed steel	Spiral Tap	For through hole	5P	-	NA	46 ～ 105

  From: 416,938 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EX-SUS-SFT for Stainless Steel

  OSG KOREA CORP

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M24	Meter	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	0.4 ～ 3	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5	Homo	Available	40 ～ 120

  From: 231,154 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Excel Spiral Tap ESP

  NACHI(FUJIKOSHI)

  [Features]· Suitable for long life thread processing of aluminum and cast iron.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M12	Meter	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.7 ～ 1.75	Carbide	Spiral Tap	For through hole / For blind hole	2.5	TiCN	Available	52 ～ 82

  From: 4,150,393 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  IS パック入 スパイラルタップ M2X0.4

  ISHIHASHI

  【特長】・止り穴に用います。・ホモ処理済です。・ホモ処理により耐食性・耐摩耗性が向上しています。・ブリスターパック1本入りです。・切削性が良く切り屑はカール状に上へ巻き上がります。・ホモ処理により、切削油の保持をし摩擦熱の発生を少なくし、溶着も防止します。【用途】・一般止まり穴加工用。・被削材：一般鋼、低・中炭素鋼、合金鋼。【商品仕様】・精度：JIS2級・呼び寸：M2.0・ピッチ(mm)：0.4・全長(mm)：40・シャンク径(mm)：3.0・シャンク四角部(mm)：2.5・下穴径(mm)：1.6・加工ねじ：メートルねじ・食い付山数：2.5山・ねじ長(mm)：12・ブリスターパック品・タップ等級：H級・JANコード：4957656465331・トラスココード：507-4568・質量：6g【材質/仕上】・高速度鋼(HSS-E)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	-	-	-	-	-	-

  From: 512,406 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s)

  13 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  TIN Cobalt Spiral Tap

  ISHIHASHI

  【特長】・表面が超硬膜になっているので、耐摩耗性・耐溶着性が大きいです。・高モリブデン含有により靭性があり、高硬度・耐熱・耐磨耗性に秀れています。・切削性が良く切り屑はカール状に上へ巻き上がります。【用途】・止り穴用。・被削材：ステンレス鋼、難削材。【商品仕様】・精度：JIS2級・呼び寸：M4・ピッチ(mm)：0.7・全長(mm)：52・シャンク径(mm)：5.0・シャンク四角部(mm)：4.0・下穴径(mm)：3.3・食い付山数：2.5山・表面処理：TINコーティング・ねじ長(mm)：13・タップ等級：H級・トラスココード：508-8852・質量：7g【材質/仕上】・コバルト高速度鋼(HSCO-M42)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	-	-	-	-	-	-

  From: 782,136 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Spiral Flute Tap, GSP5M/GSP8M

  NACHI(FUJIKOSHI)

  From general steel to difficult-to-cut materials, this coated tap allows high-speed, high-efficiency threading of blind holes.[Features]· A tap that adopts powdered high-speed steel with excellent wear resistance and has a TiN coated surface.· It has a stable life using high-speed, high-precision threading.· Special relief prevents over-cutting due to excessive advancement of the tap.[Applications]· High-speed, high-efficiency threading of through...Readmore

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	1.5	Alloy HSS	Spiral Tap	For blind hole	2.5P	TiN	Available	75

  From: 770,550 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Insert Screw Thread Tap with Long Shank_HL-LT-SFT

  OSG

  Blind hole used for tapping the female thread into which the insert (helical coil) is inserted

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3	Meter	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	100

  From: 829,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap TiN coated with Long Shank_TIN-LT-SFT

  OSG

  It is suitable for tapping low/medium carbon steel and stainless steel using a water-soluble cutting oil for applications where the thread length is 2D or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	TiN	Available	100 ～ 150

  From: 638,355 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Spiral Tap V Coated_VP-SFT

  OSG

  Optimal for processing steel alloy pre-hardened steel of 35 to 42 HRC.Tool Material: Powder metal high-speed steelThread type: MetricHole type: For blind holesWork material: General steel / heat-treated steelCoating: Surface treatment for steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	0.5 ～ 1.75	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	TiCN	Available	46 ～ 82

  From: 533,333 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral SYNCHRO Tap for Aluminum_HS-AL-SFT

  OSG

  Dedicated to machines with a complete lead feed mechanism, capable of high-speed and high-precision female thread machining of aluminum and aluminum alloys.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎]	0.4 ～ 1	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	Non-Coated	NA	40 ～ 62

  From: 375,270 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Stainless Steel, Deep Holes SUS-DH-SFT

  OSG

  Ideal for deep hole drilling of stainless steel exceeding 2D.Work material: Stainless steel / copper / resinCoating: Surface treatment, steam oxide treatment

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2.6 ～ M10	Meter	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	0.45 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	44 ～ 75

  From: 332,511 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Stainless Steels with Long Shank_EX-LT-SUS-SFT

  OSG

  Suitable for blind hole stainless steel, heat resistant steel, nickel chrome manganese steel, etc. Also suitable for materials such as carbon steel and steel alloy.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M24	Meter	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	0.5 ～ 3	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	100 ～ 150

  From: 445,766 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Titanium Alloy_V-TI-SFT

  OSG

  This product is possible to achieve long lifespan, high efficiency, and highly stable machining for titanium alloys (Ti-6Al-4V, etc.) used in the chemical industry, etc., that have been aged after solution heat treatment and have an age of 40 to 45 HRC.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/4UNJ ～ M6	Meter / unified	Titanium Alloy (Ti-6Al-4V, etc)[◎]	0.8 ～ 28	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	Other	Available	60 ～ 62

  From: 726,670 VND
  Days to Ship: Số ngày giao hàng: 33 Day(s)

  33 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for General Application (with OX)_EX-H-SFT

  OSG

  Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M33	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○]	0.4 ～ 3	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	40 ～ 120

  From: 211,666 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap High-Speed Synchronizing Tap HS-SFT

  OSG

  Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M5 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.8 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	TiN	Available	60 ～ 75

  From: 748,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPM Spiral Tap with Long Shank_CPM-LT-SFT

  OSG

  Work material ideal for forging high carbon steel, tool steel, steel alloy, or blind hole drilling with a hardness of 20 to 35 HRC for tempering

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M20	Meter	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	1.25 ～ 2.5	Powder high-speed steel	Spiral Tap	For blind hole	3P	Non-Coated	NA	100 ～ 150

  From: 1,053,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Plus Series Spiral Fluted Taps_+SP

  YAMAWA MFG

  A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.4 ～ 1	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 62

  From: 147,422 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for High Carbon Steels_HC+SP

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/2W12 ～ M30	Meter / Whitworth	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	0.5 ～ 3	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	46 ～ 135

  From: 212,485 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap General Purposes Whitworth Screw EX-SFT-W

  OSG

  [Specifications]・ Shape: Spiral Flute Tap・ Screw type: Whitworth・ Number of chamfer tooth: 2.5P・ Work Material: Medium carbon steel (C content 0.25 to 0.45%): suitable / steel alloy (SCM): suitable / ductile cast iron (FCD) "suitable / copper (Cu) "suitable / brass (Bs) "suitable / brass cast iron (BsC) "suitable / bronze (PB) "suitable / rolled aluminum (AL) "suitable / Aluminum alloy casting (AC, ADC) "/ Magnesium alloy casting (MC) "suitable...Readmore

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  W1"1/4 ～ W5/8	Whitworth	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	7 ～ 40	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	46 ～ 146

  From: 266,572 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  EX-SFT for General Purpose (UniFi) / EX-H-SFT Coating Treatment for General Purpose (UniFi)

  OSG KOREA CORP

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  NO.10-32UNF ～ 9/16-12UNC	unified	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	Vanadium High-Speed Steel	Spiral Tap	For through hole / For blind hole	2.5	Homo	Available / NA	52 ～ 125

  From: 422,387 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Combo Spiral Tap Coating (Unification Screw) T1839, T2839

  YG 1

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/4 ～ #8	unified	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎]	16UNC ～ 32UNC	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5	Homo	Available / NA	52 ～ 75

  From: 233,087 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Spiral Reverse Tap - Meter Screw (T335 Series)

  ＳＵＰＥＲＴＯＯＬ

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M30	Meter	-	0.5 ～ 3.5	High-speed steel	Spiral Tap	-	-	Homo	Available	46 ～ 135

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Spiral Tap - Meter Screw (T330 Series)

  ＳＵＰＥＲＴＯＯＬ

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M48	Meter	-	0.5 ～ 5	High-speed steel	Spiral Tap	-	-	Homo	Available	52 ～ 185

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi One Tap Multi-Purpose (UniFi Screw)

  YG 1

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  3/8	unified	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	16UNC	Powder high-speed steel	Spiral Tap	For blind hole	2.5	Homo	Available	75.5

  From: 640,676 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap Claw Tap 300 TiN Coating (for metal screws/coarse type)

  SANDVIK

  [Features]· A high-productivity tap tool.· Long tool life and excellent chip processing provide high stability.· TiN coating with high heat resistance ensures long service life even for work materials that are prone to heat buildup.· Taps are available for each work material, making selection easy.[Applications]· For blind hole machining.· Work materials: Steel.[Material]· High-Speed Steel (HSS-E)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M10	Meter	-	0.7 ～ 1.5	-	Spiral Tap	For blind hole	2.5P	TiN	Available	52 ～ 75

  From: 795,840 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  IS パック入 コバルトスパイラルタップ M3X0.5

  ISHIHASHI

  【特長】・パック入りです。・高速タッピングが可能です。・高モリブデン含有により靭性があります。・切削性が良く切り屑はカール状に上へ巻き上がります。【用途】・止まり穴加工用。・被削材：ステンレス鋼、難削材。【商品仕様】・精度：JIS2級・呼び寸：M3・ピッチ(mm)：0.50・全長(mm)：46・シャンク径(mm)：4.0・シャンク四角部(mm)：3.2・下穴径(mm)：2.5・加工ねじ：メートルねじ・食い付山数：2.5山・ねじ長(mm)：18・止り穴専用・ブリスターパック入・難削材用・タップ等級：H級・トラスココード：506-3931・単品単位数量：1本・質量：10g【材質/仕上】・コバルト高速度鋼(HSCO-M42)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	-	-	-	-	-	-

  From: 521,171 VND
  Days to Ship: Số ngày giao hàng: 13 Day(s)

  13 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  IS スパイラルタップ M18X2.5 H5(+0.03)

  ISHIHASHI

  【特長】・オーバーサイズです。・切削性が良く切り屑はカール状に上へ巻き上がります。・ホモ処理により、切削油の保持をし摩擦熱の発生を少なくし、溶着も防止します。【用途】・加工ねじ：メートルねじ・止り穴用。・食い付山数：2.5山・被削材：一般鋼、低中炭素鋼、合金鋼。【商品仕様】・精度：JIS2級+0.03相当・呼び寸：M18・ピッチ(mm)：2.5・全長(mm)：100・シャンク径(mm)：14.0・シャンク四角部(mm)：11.0・下穴径(mm)：15.5・加工ねじ：メートルねじ・食い付山数：..2.5山・表面処理：ホモ処理・ねじ長(mm)：37・オーバーサイズ・タップ等級：H級・トラスココード：508-2358・質量：108g【材質/仕上】・高速度鋼(HSS-E)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	-	-	-	-	-	-

  From: 1,792,108 VND
  Days to Ship: Số ngày giao hàng: 16 Day(s)

  16 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SG Spiral Tap Long Shank SGSPL

  NACHI(FUJIKOSHI)

  [Applications]·Used when standard dimension does not have enough tool runout length

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M17	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.35 ～ 3	Alloy HSS	Spiral Tap	For through hole / For blind hole	2.5	-	Available	150 ～ 200

  From: 801,414 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hyper Z Spiral Tap ZSP

  NACHI(FUJIKOSHI)

  [Features]・ A high performance general purpose tap with long life and little variation over a wide range of machining work.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3.5 ～ M24	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.35 ～ 3	High-speed steel	Spiral Tap	For through hole / For blind hole	2.5	-	NA	48 ～ 120

  From: 378,986 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps 1.5P_SP-1.5P

  YAMAWA MFG

  ■ The SP 1.5P has a shorter cutting chamferthan usual and there is no convex center atthe end. This makes it the best spiral flute tapfor machining a blind hole that does not havethe pilot hole length for processing the threadlength.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.2 ～ M16	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○]	0.25 ～ 2	High-speed steel	Spiral Tap	For blind hole	1.5P	-	-	36 ～ 95

  From: 221,231 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Flute Tap for Through Hole for Trapezoidal Threads_SL-Tr

  YAMAWA MFG

  [Features]· The angle of the thread crest is 30°.· The symbol used for the thread is represented by "Tr."

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  Tr 10 ～ Tr 30	Trapezoid	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]	2 ～ 6	High-speed steel	Spiral Tap	For through hole	22P ～ 30P	-	NA	160 ～ 300

  From: 9,185,616 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Z-PRO Spiral Taps for Medium Hard Carbon Steels_MHSP

  YAMAWA MFG

  [Features]· Ideal for S48C to S55C forged products and thermally refined materials (20 to 30 HRC).· Manufactured with abrasion-resistant high-speed steel and a special coating for a longer service life.· The special shape of the threaded section helps prevent the chipping of the section which is fully-threaded, reducing tapping torque and frictional resistance while also maintaining its thread guiding capability.· The overall length is set so t...Readmore

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M16	Meter	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○]	1 ～ 2	Cobalt HSS	Spiral Tap	For blind hole	2.5P	-	Available	90 ～ 110

  From: 838,470 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap(Screw Threads for Tripod Connections for CAMERA)_TRP-SFT

  OSG

  For camera tripod mounting screws.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/4UN	unified	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	20	Vanadium High-Speed Steel	Spiral Tap	For blind hole	1.5P	Non-Coated	NA	62

  From: 405,635 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  HR Coated Spiral Tap for Nickel Alloy_WHR-NI-SFT

  OSG

  A highly rigid cutting edge is realized by combining spiral taps with point grooves. Enables stable processing with a long service life for nickel base alloy (40 to 45 HRC) after aging treatment

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M8	Meter	Nickel-based alloy (Inconel, etc.)[◎]	0.7 ～ 1.25	Powder high-speed steel	Spiral Tap	For through hole	2.5P	Other	Available	52 ～ 70

  From: 610,420 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap Combined with Drill_V-DR-SFT

  OSG

  Dedicated for through hole machining only.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎]	1 ～ 1.75	Vanadium High-Speed Steel	Spiral Tap	-	2.5P	TiCN	NA	81 ～ 111

  From: 1,418,585 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap Ni-Based Super-Heat-Resistant Alloy NI-SFT

  OSG

  This product is extremely effective in cutting Ni-based ultra-heat-resistant alloys (such as Inconel 718) used in the chemical industry, etc., that have been aged after solution heat treatment and have an age of 40 to 45 HRC.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/4UNJ ～ 5/16UNJ	unified	Nickel-based alloy (Inconel, etc.)[◎]	24 ～ 28	Powder high-speed steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	62 ～ 75

  From: 538,093 VND
  Days to Ship: Số ngày giao hàng: 28 Day(s)

  28 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Spiral Tap_LW-SFT

  OSG

  With a weak twist groove, cutting chips are cut into small pieces and discharged backwards, enabling stable tapping. It also has excellent chipping resistance.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	62

  From: 289,085 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT

  OSG

  Dedicated to machines with a complete lead feed mechanism, suitable for high-speed and high-precision set thread machining.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.5 ～ 1.5	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	TiN	Available	100 ～ 150

  From: 998,260 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for High-Carbon Steel EX-HC-SFT

  OSG

  Suitable for machining blind holes in medium carbon steel and higher carbon materials, die steel, steel alloy, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○]	0.5 ～ 2	Vanadium High-Speed Steel	Spiral Tap	For blind hole	3P	Non-Coated	NA	46 ～ 95

  From: 237,637 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tungsten Carbide Spiral Tap_OT-SFT

  OSG

  Suitable for tapping blind holes of aluminum alloy / magnesium alloy / copper alloy / thermoplastic, etc., in large quantities with high precision automatic machines.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	0.5 ～ 1.75	Carbide	Spiral Tap	For blind hole	1.5P ～ 2.5P	Non-Coated	NA	46 ～ 82

  From: 2,438,333 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap for Mild Steels and Deep Holes with Long Shank_LT-MS-DH-SFT

  OSG

  It is suitable for cases where tap damage due to cutting chip clogging at the blind hole and gnawing, etc., of female threads are likely to occur.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1	Vanadium High-Speed Steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	120

  From: 487,077 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap with Oil Holes OIL-SFT

  OSG

  Effective for horizontal blind holes and deep hole machining. The lubrication holes allow the cutting oil to act on the cutting edge, enabling high-speed, high-precision tapping.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	1.5	High-speed steel	Spiral Tap	For blind hole	2.5P	Non-Coated	NA	120

  From: 1,144,121 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  SU Spiral Flute Tap for Stainless Steel

  SKC

  [Specifications]· Shape: Spiral tap· Screw type: metric· Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron ...Readmore

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10 ～ M14	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5 ～ 2	-	Spiral Tap	-	-	-	-	-

  From: 671,346 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Flute Tap (SKH)

  SKC

  [Applications]Can be used for tapping screw holes in stainless steel.[Features]This spiral flute tap can discharge chips with a coiled groove.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  W1 ～ M48	Meter / Whitworth	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	0.5 ～ 20	-	Spiral Tap	-	-	-	-	-

  From: 358,736 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap

  ISHIHASHI

  Torsional angled groove shape, cutting edge, and clearance angle provide a unique design that results in extraordinarily low cutting torque and increased wear resistance, with threaded section also oxidized for outstanding durability.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	-	0.5 ～ 2	-	Spiral Tap	-	-	Other	Available	46 ～ 95

  From: 215,640 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	YAMAWA MFG	OSG KOREA CORP	NACHI(FUJIKOSHI)	ISHIHASHI	ISHIHASHI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	OSG	OSG KOREA CORP	YG 1	ＳＵＰＥＲＴＯＯＬ	ＳＵＰＥＲＴＯＯＬ	YG 1	SANDVIK	ISHIHASHI	ISHIHASHI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SKC	SKC	ISHIHASHI
Product SeriesDòng sản phẩm	Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P	EX-SUS-SFT for Stainless Steel	Excel Spiral Tap ESP	IS パック入 スパイラルタップ M2X0.4	TIN Cobalt Spiral Tap	G Spiral Flute Tap, GSP5M/GSP8M	Spiral Insert Screw Thread Tap with Long Shank_HL-LT-SFT	Spiral Tap TiN coated with Long Shank_TIN-LT-SFT	CPM Spiral Tap V Coated_VP-SFT	Spiral SYNCHRO Tap for Aluminum_HS-AL-SFT	Spiral Tap for Stainless Steel, Deep Holes SUS-DH-SFT	Spiral Tap for Stainless Steels with Long Shank_EX-LT-SUS-SFT	Spiral Tap for Titanium Alloy_V-TI-SFT	Spiral Tap for General Application (with OX)_EX-H-SFT	Spiral Tap High-Speed Synchronizing Tap HS-SFT	CPM Spiral Tap with Long Shank_CPM-LT-SFT	Plus Series Spiral Fluted Taps_+SP	Spiral Fluted Taps for High Carbon Steels_HC+SP	Spiral Tap General Purposes Whitworth Screw EX-SFT-W	EX-SFT for General Purpose (UniFi) / EX-H-SFT Coating Treatment for General Purpose (UniFi)	Combo Spiral Tap Coating (Unification Screw) T1839, T2839	HSS Spiral Reverse Tap - Meter Screw (T335 Series)	HSS Spiral Tap - Meter Screw (T330 Series)	Multi One Tap Multi-Purpose (UniFi Screw)	Spiral Tap Claw Tap 300 TiN Coating (for metal screws/coarse type)	IS パック入 コバルトスパイラルタップ M3X0.5	IS スパイラルタップ M18X2.5 H5(+0.03)	SG Spiral Tap Long Shank SGSPL	Hyper Z Spiral Tap ZSP	Spiral Fluted Taps 1.5P_SP-1.5P	Spiral Flute Tap for Through Hole for Trapezoidal Threads_SL-Tr	Z-PRO Spiral Taps for Medium Hard Carbon Steels_MHSP	Spiral Tap(Screw Threads for Tripod Connections for CAMERA)_TRP-SFT	HR Coated Spiral Tap for Nickel Alloy_WHR-NI-SFT	Spiral Tap Combined with Drill_V-DR-SFT	Spiral Tap Ni-Based Super-Heat-Resistant Alloy NI-SFT	Low Spiral Tap_LW-SFT	Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT	Spiral Tap for High-Carbon Steel EX-HC-SFT	Tungsten Carbide Spiral Tap_OT-SFT	Spiral Tap for Mild Steels and Deep Holes with Long Shank_LT-MS-DH-SFT	Spiral Tap with Oil Holes OIL-SFT	SU Spiral Flute Tap for Stainless Steel	Spiral Flute Tap (SKH)	Spiral Tap
From	416,938 VND	231,154 VND	4,150,393 VND	512,406 VND	782,136 VND	770,550 VND	829,333 VND	638,355 VND	533,333 VND	375,270 VND	332,511 VND	445,766 VND	726,670 VND	211,666 VND	748,333 VND	1,053,333 VND	147,422 VND	212,485 VND	266,572 VND	422,387 VND	233,087 VND			640,676 VND	795,840 VND	521,171 VND	1,792,108 VND	801,414 VND	378,986 VND	221,231 VND	9,185,616 VND	838,470 VND	405,635 VND	610,420 VND	1,418,585 VND	538,093 VND	289,085 VND	998,260 VND	237,637 VND	2,438,333 VND	487,077 VND	1,144,121 VND	671,346 VND	358,736 VND	215,640 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	13 Day(s)	13 Day(s) or more	Same day	17 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	33 Day(s)	6 Day(s) or more	17 Day(s) or more	17 Day(s)	Same day or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s)	9 Day(s)	13 Day(s)	16 Day(s)	6 Day(s) or more	6 Day(s) or more	9 Day(s)	7 Day(s) or more	7 Day(s) or more	Same day	6 Day(s) or more	17 Day(s)	28 Day(s)	6 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	17 Day(s)	17 Day(s)	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more
Screw size (Nominal)	M3 ～ M20	M2 ～ M24	M4 ～ M12	-	-	M10	M3	M3 ～ M16	M3 ～ M12	M2 ～ M6	M2.6 ～ M10	M3 ～ M24	1/4UNJ ～ M6	M2 ～ M33	M5 ～ M10	M8 ～ M20	M2 ～ M6	1/2W12 ～ M30	W1"1/4 ～ W5/8	NO.10-32UNF ～ 9/16-12UNC	1/4 ～ #8	M3 ～ M30	M4 ～ M48	3/8	M4 ～ M10	-	-	M3 ～ M17	M3.5 ～ M24	M1.2 ～ M16	Tr 10 ～ Tr 30	M8 ～ M16	1/4UN	M4 ～ M8	M6 ～ M12	1/4UNJ ～ 5/16UNJ	M6	M3 ～ M10	M3 ～ M16	M3 ～ M12	M6	M10	M10 ～ M14	W1 ～ M48	M3 ～ M16
Screw Types	Meter	Meter	Meter	-	-	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter / unified	Meter	Meter	Meter	Meter	Meter / Whitworth	Whitworth	unified	unified	Meter	Meter	unified	Meter	-	-	Meter	Meter	Meter	Trapezoid	Meter	unified	Meter	Meter	unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Whitworth	Meter
work material	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Titanium Alloy (Ti-6Al-4V, etc)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-
Pitch (P), Number of Threading(mm)	0.5 ～ 2.5	0.4 ～ 3	0.7 ～ 1.75	-	-	1.5	0.5	0.5 ～ 2	0.5 ～ 1.75	0.4 ～ 1	0.45 ～ 1.5	0.5 ～ 3	0.8 ～ 28	0.4 ～ 3	0.8 ～ 1.5	1.25 ～ 2.5	0.4 ～ 1	0.5 ～ 3	7 ～ 40	-	16UNC ～ 32UNC	0.5 ～ 3.5	0.5 ～ 5	16UNC	0.7 ～ 1.5	-	-	0.35 ～ 3	0.35 ～ 3	0.25 ～ 2	2 ～ 6	1 ～ 2	20	0.7 ～ 1.25	1 ～ 1.75	24 ～ 28	1	0.5 ～ 1.5	0.5 ～ 2	0.5 ～ 1.75	1	1.5	1.5 ～ 2	0.5 ～ 20	0.5 ～ 2
Tool Material Type	Powder high-speed steel	Vanadium High-Speed Steel	Carbide	-	-	Alloy HSS	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Powder high-speed steel	-	-	-	Alloy HSS	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	High-speed steel	-	-	-
Tap Type	Spiral Tap	Spiral Tap	Spiral Tap	-	-	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	-	-	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap
Hole type	For through hole	For blind hole	For through hole / For blind hole	-	-	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	-	-	For blind hole	For blind hole	-	-	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For blind hole	For blind hole	For through hole	-	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	-	-	-
Chamfer threads (Lcf)	5P	2.5	2.5	-	-	2.5P	2.5P	2.5P	2.5P	3P	2.5P	2.5P	2.5P	2.5P	3P	3P	2.5P	2.5P	2.5P	2.5	2.5	-	-	2.5	2.5P	-	-	2.5	2.5	1.5P	22P ～ 30P	2.5P	1.5P	2.5P	2.5P	2.5P	2.5P	3P	3P	1.5P ～ 2.5P	2.5P	2.5P	-	-	-
Coating Type	-	Homo	TiCN	-	-	TiN	Non-Coated	TiN	TiCN	Non-Coated	Non-Coated	Non-Coated	Other	Non-Coated	TiN	Non-Coated	-	-	Non-Coated	Homo	Homo	Homo	Homo	Homo	TiN	-	-	-	-	-	-	-	Non-Coated	Other	TiCN	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	-	Other
Coating Y/N	NA	Available	Available	-	-	Available	NA	Available	Available	NA	NA	NA	Available	NA	Available	NA	NA	NA	NA	Available / NA	Available / NA	Available	Available	Available	Available	-	-	Available	NA	-	NA	Available	NA	Available	NA	NA	NA	Available	NA	NA	NA	NA	-	-	Available
Overall Length (L)(mm)	46 ～ 105	40 ～ 120	52 ～ 82	-	-	75	100	100 ～ 150	46 ～ 82	40 ～ 62	44 ～ 75	100 ～ 150	60 ～ 62	40 ～ 120	60 ～ 75	100 ～ 150	42 ～ 62	46 ～ 135	46 ～ 146	52 ～ 125	52 ～ 75	46 ～ 135	52 ～ 185	75.5	52 ～ 75	-	-	150 ～ 200	48 ～ 120	36 ～ 95	160 ～ 300	90 ～ 110	62	52 ～ 70	81 ～ 111	62 ～ 75	62	100 ～ 150	46 ～ 95	46 ～ 82	120	120	-	-	46 ～ 95

Loading...Tải…