Thread Cutters（work material：Brass cast iron (BsC)）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

  MISUMI

  Threading cutters that enable the high-speed stable processing are available at special prices

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	Brass cast iron (BsC)[○]	0.5 ～ 2.5	Carbide	Thread cutter	For through hole / For blind hole	TiAlN	Available	57 ～ 115

  From: 2,989,799 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MMTS Micro Threading Tool

  NS TOOL

  [Features]・ Female threads with a nominal diameter of 0.1 mm can be machined.・ Helical thread-machining is performed, and the tool diameter is smaller than the pilot hole diameter, so it can be taken out and reworked when broken.・ A long lifespan is achieved by using MUGEN coating.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  S0.1 ～ S1.4	Other	Brass cast iron (BsC)[◎]	0.025 ～ 0.3	Carbide	Thread cutter	-	TiAlN	Available	45

  From: 1,842,278 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series NC Planet Cutter WX-PNC

  OSG

  If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / unified / Taper for Pipe	Brass cast iron (BsC)[○]	1 ～ 28	Carbide	Thread cutter	For through hole / For blind hole	TiAlN	Available	60 ～ 120

  From: 5,378,313 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS Coated Carbide Threading Cutter, for Internal Metric Threads

  MISUMI

  [Features]··Carbide thread mill cutter capable of high-speed stable machining·Can be used for both blind holes and through holes··It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	Brass cast iron (BsC)[○]	0.5 ～ 1.75	Carbide	Thread cutter	For through hole / For blind hole	For High Hardness (Silicon Group)	Available	48 ～ 74

  From: 5,701,428 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series MC - Planet Cutter PNGT

  OSG

  If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / Taper for Pipe / Parallel for Pipes	Brass cast iron (BsC)[○]	1 ～ 19	Cobalt HSS	Thread cutter	For through hole / For blind hole	TiN	Available	80 ～ 210

  From: 6,905,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Super Planet DR-PNAC

  OSG

  A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M12	Meter	Brass cast iron (BsC)[○]	1 ～ 1.75	Carbide	Thread cutter	For through hole / For blind hole	TiAlN	Available	62 ～ 89

  From: 11,690,060 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Thread Mills for Metric Internal Threads_MC-HLC

  YAMAWA MFG

  A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1015 ～ 32506N300M	Meter / Taper for Pipe / Parallel for Pipes	Brass cast iron (BsC)[○]	-	Cobalt HSS	Thread cutter	-	TiN	Available	70 ～ 200

  From: 7,843,266 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Thread Mills for Metric Internal Threads_MC-CSLC

  YAMAWA MFG

  A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  06510X28R ～ 200505N300M	Meter / Taper for Pipe / Parallel for Pipes	Brass cast iron (BsC)[○]	0.5 ～ 3	Carbide	Thread cutter	For through hole / For blind hole	TiAlN	Available	50 ～ 140

  From: 8,351,241 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

  MISUMI

  [Features]·Carbide thread mill cutter capable of high-speed stable machining·Can be used for both blind holes and through holes·DLC coating with excellent abrasion resistance and chip-weld resistance makes it ideal for Non steel metals such as Aluminum and Copper

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	Brass cast iron (BsC)[○]	0.5 ～ 2	Carbide	Thread cutter	For through hole / For blind hole	DLC	Available	57 ～ 92

  From: 3,376,609 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

  MISUMI

  The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	Brass cast iron (BsC)[○]	0.4 ～ 1.75	Carbide	Thread cutter	For through hole / For blind hole	TiAlN	Available	58 ～ 73

  From: 7,894,879 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

  MISUMI

  [Features]·Small diameter thread cutting from M1.4 × 0.3 (Pilot hole diameter ø1.1 mm) is possible·Reduced cutting load due to short flute length (3 ridges)·Enables effective thread cutting to corners of blind holes

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M20	Meter	Brass cast iron (BsC)[○]	0.3 ～ 2.5	Carbide	Thread cutter	For through hole / For blind hole	TiAlN	Available	39 ～ 105

  From: 6,588,067 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

  OSG

  Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter / unified	Brass cast iron (BsC)[○/◎]	0.25 ～ 32	Carbide	Thread cutter	For through hole / For blind hole	For High Hardness (Silicon Group) / Other	Available	40

  From: 2,083,136 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

  OSG

  A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M12	Meter	Brass cast iron (BsC)[◎]	1 ～ 1.75	Carbide	Thread cutter	For blind hole	TiAlN	Available	62 ～ 89

  From: 11,099,508 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	NS TOOL	OSG	MISUMI	OSG	OSG	YAMAWA MFG	YAMAWA MFG	MISUMI	MISUMI	MISUMI	OSG	OSG
Product SeriesDòng sản phẩm	TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads	MMTS Micro Threading Tool	Planet Cutter Series NC Planet Cutter WX-PNC	TS Coated Carbide Threading Cutter, for Internal Metric Threads	Planet Cutter Series MC - Planet Cutter PNGT	Planet Cutter Series Super Planet DR-PNAC	Thread Mills for Metric Internal Threads_MC-HLC	Carbide Thread Mills for Metric Internal Threads_MC-CSLC	DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model	TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads	TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)	Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC	Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC
From	2,989,799 VND	1,842,278 VND	5,378,313 VND	5,701,428 VND	6,905,394 VND	11,690,060 VND	7,843,266 VND	8,351,241 VND	3,376,609 VND	7,894,879 VND	6,588,067 VND	2,083,136 VND	11,099,508 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	12 Day(s)	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Screw size (Nominal)	M3 ～ M20	S0.1 ～ S1.4	-	M3 ～ M12	-	M6 ～ M12	1015 ～ 32506N300M	06510X28R ～ 200505N300M	M3 ～ M16	M2 ～ M12	M1.4 ～ M20	-	M6 ～ M12
Screw Types	Meter	Other	Meter / unified / Taper for Pipe	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter	Meter	Meter / unified	Meter
work material	Brass cast iron (BsC)[○]	Brass cast iron (BsC)[◎]	Brass cast iron (BsC)[○]	Brass cast iron (BsC)[○]	Brass cast iron (BsC)[○]	Brass cast iron (BsC)[○]	Brass cast iron (BsC)[○]	Brass cast iron (BsC)[○]	Brass cast iron (BsC)[○]	Brass cast iron (BsC)[○]	Brass cast iron (BsC)[○]	Brass cast iron (BsC)[○/◎]	Brass cast iron (BsC)[◎]
Pitch (P), Number of Threading(mm)	0.5 ～ 2.5	0.025 ～ 0.3	1 ～ 28	0.5 ～ 1.75	1 ～ 19	1 ～ 1.75	-	0.5 ～ 3	0.5 ～ 2	0.4 ～ 1.75	0.3 ～ 2.5	0.25 ～ 32	1 ～ 1.75
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Tap Type	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter
Hole type	For through hole / For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole
Coating Type	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	TiN	TiAlN	TiN	TiAlN	DLC	TiAlN	TiAlN	For High Hardness (Silicon Group) / Other	TiAlN
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Overall Length (L)(mm)	57 ～ 115	45	60 ～ 120	48 ～ 74	80 ～ 210	62 ～ 89	70 ～ 200	50 ～ 140	57 ～ 92	58 ～ 73	39 ～ 105	40	62 ～ 89

Loading...Tải…