Thread-Cutting-Related Tools

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Tap / Drill Set【21 Pieces Per Package】

  ISHIHASHI

  [Features]・ A set of hand taps and prepared hole drills for general steel[Applications]・ Work material: General steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	Thread-cutting-related tool	-	-	Non-Coated	NA	-

  From: 4,661,073 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Nut Tap Series Nut Tap NT

  OSG

  Mainly used for tapping nuts. Considering the workability of the nut, the length of the thread section and shank part are long, and continuous machining is possible until the nut is fully filled in the shank part.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4 ～ M12	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.5 ～ 1.75	High-speed steel	Thread-cutting-related tool	-	-	Non-Coated	NA	100 ～ 170

  From: 660,190 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  MACHINING CENTER Tap with Long Shank_EX-MCT

  OSG

  Stable performance can be obtained by suppressing the cutting chips from getting caught that tends to occur in the horizontal machining center.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M10 ～ M12	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	1.5	Vanadium High-Speed Steel	Thread-cutting-related tool	For through hole / For blind hole	3P	Non-Coated	NA	150

  From: 1,031,725 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Shaft Tapping Drill

  ONISHI MANUFACTURING

  [Features]· Impact drill compatible hexagonal shaft drilling tool for simultaneous pilot hole drilling and thread cutting work.[Applications]· For formation and modification of through-hole threads.· Work materials: Iron, aluminum, brass.[Features]· 1 unit enables pilot hole machining and thread cutting at the same time.· 6.35 mm hex shaft finish that supports impact drivers.· Drill cutting edge with good bite due to X-type thinning and outstanding sharpness

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M6	Meter	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.5 ～ 1	High-speed steel	Thread-cutting-related tool	For through hole	-	Non-Coated	NA	66 ～ 69

  From: 797,501 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】

  ONISHI MANUFACTURING

  Hexagonal Shaft Tap[Features]Can be attached to electric tools with forward and reverse rotation such as impact screwdriver, and threaded hole processing can be done in a short time.[Usage]Formation and modification of thread ridge in through holes.[Specification]Screw Length: 20mmTotal Length: 70mmShank Diameter: 6.35mmSPQ: 6pieceMachining Thread: Metric Thread Screw[Material]Alloy Tool Steel (SKS2)Work Material: Iron, Aluminum, Brass.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M4	Meter	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.5 ～ 0.7	High-speed steel	Thread-cutting-related tool	For through hole	-	Non-Coated	NA	70 ～ 70/70/70

  From: 228,784 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tap Set K-431

  HOZAN

  A tap set with T-type handle and 3 sizes of tap.[Features]· Tap size is (M3 x 0.5/M4 x 0.7/M5 x 0.8).· All taps are medium tap types.· Threading tool set consisting of a T handle and 3 tap sizes.[Applications]· Ideal for threading.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	-	High-speed steel	Thread-cutting-related tool	For through hole / For blind hole	-	-	NA	-

  From: 515,995 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)

  ONISHI MANUFACTURING

  [Features]· Uses HSS that features excellent abrasion resistance.· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.· Cutting chips are discharged upwards due to the spiral groove

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M10	Meter	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	1 ～ 1.5	High-speed steel	Thread-cutting-related tool	For through hole / For blind hole	-	Non-Coated	NA	70

  From: 407,033 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S

  YAMAWA MFG

  5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10 ～ M12	Meter / unified	-	0.35 ～ 64	High-speed steel	Thread-cutting-related tool	For through hole / For blind hole	-	-	NA	41.5 ～ 121

  From: 526,815 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Flutes Tap Combined with Drill_DRT

  OSG

  It is very effective for improving productivity because the drill part at the tip makes a pilot hole for the tap and tapping can be done continuously at the tap part.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M16	Meter	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	1.25 ～ 2	High-speed steel	Thread-cutting-related tool	-	5P	Non-Coated	NA	102 ～ 159

  From: 1,470,378 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)

  ONISHI MANUFACTURING

  [Features]· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.· Chips inside the work material are discharged forward.· Stable machining, unlikely to break.· Due to titanium coating, durability is enhanced, and it can be used on stainless steel as well

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M6	Meter	Stainless steel (SUS)[○] / Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.5 ～ 1	High-speed steel	Thread-cutting-related tool	For through hole	-	TiN	Available	70

  From: 469,674 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cobalt spiral type/drill set【21 Pieces Per Package】

  ISHIHASHI

  [Features]・ A set of spiral flute tap and pilot hole drill for stainless steel and difficult-to-cut materials[Applications]・ Work material: Stainless steel, difficult-to-cut materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter	-	-	Cobalt HSS	Thread-cutting-related tool	-	-	Non-Coated	NA	-

  From: 8,692,644 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  六角軸タッピングドリル

  RUKO

  【特長】・六角軸シャンク仕様で、コードレスドライバーに装着可能です。・鉄板等の下穴開け作業とネジ切り作業をドリルを交換せずに行うことができます。【用途】・穴あけ、ネジ山の形成・修正に。・被削材：鉄、アルミ、銅。

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M10	Meter	-	0.5 ～ 1.5	-	Thread-cutting-related tool	-	-	-	-	36 ～ 59

  From: 617,400 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Union Tool Screw Cutting Tool

  UNION TOOL

  [Features]· Thread cutting tool for machining carbide alloys and hard brittle materials. (Thread mill type)· Enables direct engraving, dramatically improving efficiency and precision of discharge and grinding.· Uses a newly developed diamond coating with ultra high hardness for toughness and adhesive strength.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M8	-	-	0.4 ～ 1.25	-	Thread-cutting-related tool	-	-	Other	Available	50 ～ 60

  From: 10,007,911 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mag Tap 3–12 mm

  KANETEC

  [Features]· Small, lightweight, and easy to carry around.· Tap guide holder that can easily perform accurate tapping operation on plane and side surface.[Applications]· For threading work.· A tool that simplifies work by facilitating tapping of pilot holes in iron plate and steel, etc., with a work stand installed with a powerful magnet.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	Thread-cutting-related tool	-	-	-	-	-

  From: 10,340,223 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  MACHINING CENTER Tap (Normal Length)_EX-S-MCT

  OSG

  Stable performance can be obtained by suppressing the cutting chips from getting caught that tends to occur in the horizontal machining center.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M8 ～ M22	Meter	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	1.25 ～ 2.5	Vanadium High-Speed Steel	Thread-cutting-related tool	For through hole / For blind hole	3P	Non-Coated	NA	70 ～ 115

  From: 394,265 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electro plated Diamond Tap for Ceramics_ED-PNT

  OSG

  [Features]·With no lead like a regular power strip in this product, the tool attached to the shaft of the pilot hole performs a self-rotating and orbital motion to grind a thread with a lead.·The X, Y, and Z axes are fed simultaneously, so the prerequisite for use is that the machine is equipped with a 3-axis simultaneous control mechanism.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Other	-	0.5 ～ 2	-	Thread-cutting-related tool	-	-	-	-	50 ～ 80

  From: 5,130,196 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cobalt jet/spiral type/drill set【21 Pieces Per Package】

  ISHIHASHI

  [Features]・ A set of stainless steel, jet tap, spiral flute tap and prepared hole drill for difficult-to-cut materials[Applications]・ Work material: Stainless steel, difficult-to-cut materials

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	Meter	-	-	Cobalt HSS	Thread-cutting-related tool	-	-	Non-Coated	NA	-

  From: 8,519,924 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap / Drill Set for Electric Construction【26 Pieces Per Package】

  ISHIHASHI

  [Features]・ A set of spiral flute tap and pilot hole drill for general steel[Applications]・ Work material: General steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	Thread-cutting-related tool	-	-	Non-Coated	NA	-

  From: 5,508,000 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】

  ISHIHASHI

  [Features]・ A set of hand taps and prepared hole drills for general steel[Applications]・ Work material: General steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	Thread-cutting-related tool	-	-	Non-Coated	NA	-

  From: 3,780,753 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Tap / Drill Set【21 Pieces Per Package】

  ISHIHASHI

  [Features]・ A set of spiral flute tap and pilot hole drill for general steel[Applications]・ Work material: General steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	High-speed steel	Thread-cutting-related tool	-	-	Non-Coated	NA	-

  From: 7,666,752 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Jet tap/drill set【21 Pieces Per Package】

  ISHIHASHI

  Set in steel case including jet taps, pilot hole drills, and tap wrenches

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	Thread-cutting-related tool	-	-	Non-Coated	NA	-

  From: 7,420,459 VND
  Days to Ship: Số ngày giao hàng: 16 Day(s)

  16 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Jet/spiral tap/drill set【21 Pieces Per Package】

  ISHIHASHI

  [Features]・ A set of jet taps, spiral flute taps and prepared hole drills for general steel[Applications]・ Work material: General steel

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	High-speed steel	Thread-cutting-related tool	-	-	Non-Coated	NA	-

  From: 7,214,690 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T

  YAMAWA MFG

  Provides simple check of pilot hole diameter. Uses high speed tool steel out of consideration for wear resistance. Can be used for either through holes or blind holes with margin.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	-	0.4 ～ 1.75	High-speed steel	Thread-cutting-related tool	-	-	-	NA	42 ～ 110

  From: 354,303 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Magnet Tapper

  NEW STRONG

  [Specification]・ Shape: Threading related tools・ Usage method: 1 Fix it to the workpiece with a magnet. 2 Set the compatible tap and rotate the handle to cut the screw[Applications]・ If the workpiece is too large to be machined・ Since it is a manual type, it does not require a power supply and can be used outdoors・ Compatible tap size: M3 to M12

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	-	-	-	-	-	-

  From: 11,432,161 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  六角軸タッピングドリル（TiNコーティング）

  RUKO

  【特長】・六角軸シャンク仕様で、コードレスドライバーに装着可能です。・鉄板等の下穴開け作業とネジ切り作業をドリルを交換せずに行うことができます。【用途】・穴あけ、ネジ山の形成・修正に。・被削材：鉄、アルミ、銅、ステンレス。

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M10	Meter	-	0.5 ～ 1.5	-	Thread-cutting-related tool	-	-	-	-	36 ～ 59

  From: 980,280 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  六角軸タッピングドリルセット（TiNコーティング）【6 Pieces Per Package】

  RUKO

  【特長】・六角軸シャンク仕様で、コードレスドライバーに装着可能です。・鉄板等の下穴開け作業とネジ切り作業をドリルを交換せずに行うことができます。【用途】・穴あけ、ネジ山の形成・修正に。・被削材：鉄、アルミ、銅、ステンレス。

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  -	-	-	-	-	Thread-cutting-related tool	-	-	-	-	-

  From: 8,446,680 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S

  YAMAWA MFG

  [Features]· (Straight type) Roll tap check pin that can be used to check several types of pilot hole diameters and pilot hole depth.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10 ～ M12	Meter / unified	-	0.4 ～ 64	High-speed steel	Thread-cutting-related tool	For blind hole	-	Non-Coated	NA	41.5 ～ 121

  From: 538,088 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T

  YAMAWA MFG

  [Features]· (Taper type) Roll tap pilot hole check pin that can be used to easily check pilot hole diameters with the 1 tool.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for both through-holes and blind-holes if the latter has ample room.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10 ～ M12	Meter / unified	-	0.4 ～ 64	High-speed steel	Thread-cutting-related tool	For through hole / For blind hole	-	Non-Coated	NA	59.5 ～ 61.5

  From: 376,635 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Adjusters_SA

  YAMAWA MFG

  [Features]· Tap holder used to extend the tap length for use.· Can be used to make I series taps (ISP/IPO/IHT) longer.· Alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M10	Meter	-	150	-	Thread-cutting-related tool	-	-	Non-Coated	NA	103 ～ 127

  From: 3,508,737 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	ISHIHASHI	OSG	OSG	ONISHI MANUFACTURING	ONISHI MANUFACTURING	HOZAN	ONISHI MANUFACTURING	YAMAWA MFG	OSG	ONISHI MANUFACTURING	ISHIHASHI	RUKO	UNION TOOL	KANETEC	OSG	OSG	ISHIHASHI	ISHIHASHI	ISHIHASHI	ISHIHASHI	ISHIHASHI	ISHIHASHI	YAMAWA MFG	NEW STRONG	RUKO	RUKO	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product SeriesDòng sản phẩm	Hand Tap / Drill Set【21 Pieces Per Package】	Nut Tap Series Nut Tap NT	MACHINING CENTER Tap with Long Shank_EX-MCT	Hexagonal Shaft Tapping Drill	Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】	Tap Set K-431	Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)	Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S	Straight Flutes Tap Combined with Drill_DRT	Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)	Cobalt spiral type/drill set【21 Pieces Per Package】	六角軸タッピングドリル	Union Tool Screw Cutting Tool	Mag Tap 3–12 mm	MACHINING CENTER Tap (Normal Length)_EX-S-MCT	Electro plated Diamond Tap for Ceramics_ED-PNT	Cobalt jet/spiral type/drill set【21 Pieces Per Package】	Spiral Tap / Drill Set for Electric Construction【26 Pieces Per Package】	Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】	Spiral Tap / Drill Set【21 Pieces Per Package】	Jet tap/drill set【21 Pieces Per Package】	Jet/spiral tap/drill set【21 Pieces Per Package】	Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T	Magnet Tapper	六角軸タッピングドリル（TiNコーティング）	六角軸タッピングドリルセット（TiNコーティング）【6 Pieces Per Package】	Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S	Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T	Shank Adjusters_SA
From	4,661,073 VND	660,190 VND	1,031,725 VND	797,501 VND	228,784 VND	515,995 VND	407,033 VND	526,815 VND	1,470,378 VND	469,674 VND	8,692,644 VND	617,400 VND	10,007,911 VND	10,340,223 VND	394,265 VND	5,130,196 VND	8,519,924 VND	5,508,000 VND	3,780,753 VND	7,666,752 VND	7,420,459 VND	7,214,690 VND	354,303 VND	11,432,161 VND	980,280 VND	8,446,680 VND	538,088 VND	376,635 VND	3,508,737 VND
Days to ShipSố ngày giao hàng	Same day	17 Day(s)	6 Day(s) or more	9 Day(s)	9 Day(s)	Same day	9 Day(s)	8 Day(s) or more	17 Day(s)	Same day or more	9 Day(s)	9 Day(s)	7 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	9 Day(s)	16 Day(s)	9 Day(s)	8 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s)	8 Day(s) or more	8 Day(s) or more	8 Day(s)
Screw size (Nominal)	-	M4 ～ M12	M10 ～ M12	M3 ～ M6	M3 ～ M4	-	M6 ～ M10	No.10 ～ M12	M8 ～ M16	M3 ～ M6	-	M3 ～ M10	M2 ～ M8	-	M8 ～ M22	-	-	-	-	-	-	-	M2 ～ M12	-	M3 ～ M10	-	No.10 ～ M12	No.10 ～ M12	M3 ～ M10
Screw Types	-	Meter	Meter	Meter	Meter	Meter	Meter	Meter / unified	Meter	Meter	Meter	Meter	-	-	Meter	Other	Meter	-	-	-	-	-	Meter	-	Meter	-	Meter / unified	Meter / unified	Meter
work material	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Stainless steel (SUS)[○] / Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	-	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Pitch (P), Number of Threading(mm)	-	0.5 ～ 1.75	1.5	0.5 ～ 1	0.5 ～ 0.7	-	1 ～ 1.5	0.35 ～ 64	1.25 ～ 2	0.5 ～ 1	-	0.5 ～ 1.5	0.4 ～ 1.25	-	1.25 ～ 2.5	0.5 ～ 2	-	-	-	-	-	-	0.4 ～ 1.75	-	0.5 ～ 1.5	-	0.4 ～ 64	0.4 ～ 64	150
Tool Material Type	-	High-speed steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	-	-	-	Vanadium High-Speed Steel	-	Cobalt HSS	-	-	High-speed steel	-	High-speed steel	High-speed steel	-	-	-	High-speed steel	High-speed steel	-
Tap Type	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	-	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool
Hole type	-	-	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	For through hole	-	-	-	-	For through hole / For blind hole	-	-	-	-	-	-	-	-	-	-	-	For blind hole	For through hole / For blind hole	-
Chamfer threads (Lcf)	-	-	3P	-	-	-	-	-	5P	-	-	-	-	-	3P	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Coating Type	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	Non-Coated	-	Non-Coated	TiN	Non-Coated	-	Other	-	Non-Coated	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	-	-	-	Non-Coated	Non-Coated	Non-Coated
Coating Y/N	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	-	Available	-	NA	-	NA	NA	NA	NA	NA	NA	NA	-	-	-	NA	NA	NA
Overall Length (L)(mm)	-	100 ～ 170	150	66 ～ 69	70 ～ 70/70/70	-	70	41.5 ～ 121	102 ～ 159	70	-	36 ～ 59	50 ～ 60	-	70 ～ 115	50 ～ 80	-	-	-	-	-	-	42 ～ 110	-	36 ～ 59	-	41.5 ～ 121	59.5 ～ 61.5	103 ～ 127

Loading...Tải…