Thread-Cutting-Related Tools（Screw size (Nominal)：M4）

• You can add up to 6 items per a category to the compare list. Compare

  

  Nut Tap Series Nut Tap NT

  OSG

  Mainly used for tapping nuts. Considering the workability of the nut, the length of the thread section and shank part are long, and continuous machining is possible until the nut is fully filled in the shank part.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	0.5	High-speed steel	Thread-cutting-related tool	-	-	Non-Coated	NA	100

  From: 1,259,620 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)

  ONISHI MANUFACTURING

  [Features]· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.· Chips inside the work material are discharged forward.· Stable machining, unlikely to break.· Due to titanium coating, durability is enhanced, and it can be used on stainless steel as well

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Stainless steel (SUS)[○] / Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.7	High-speed steel	Thread-cutting-related tool	For through hole	-	TiN	Available	70

  From: 474,674 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Shaft Tapping Drill

  ONISHI MANUFACTURING

  [Features]· Impact drill compatible hexagonal shaft drilling tool for simultaneous pilot hole drilling and thread cutting work.[Applications]· For formation and modification of through-hole threads.· Work materials: Iron, aluminum, brass.[Features]· 1 unit enables pilot hole machining and thread cutting at the same time.· 6.35 mm hex shaft finish that supports impact drivers.· Drill cutting edge with good bite due to X-type thinning and outstanding sharpness

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.7	High-speed steel	Thread-cutting-related tool	For through hole	-	Non-Coated	NA	67

  From: 806,943 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hexagonal Shaft Tap (for Through Hole)

  ONISHI MANUFACTURING

  Hexagonal Shaft Tap[Features]Can be attached to electric tools with forward and reverse rotation such as impact screwdriver, and threaded hole processing can be done in a short time.[Usage]Formation and modification of thread ridge in through holes.[Specification]Screw Length: 20mmTotal Length: 70mmShank Diameter: 6.35mmSPQ: 6pieceMachining Thread: Metric Thread Screw[Material]Alloy Tool Steel (SKS2)Work Material: Iron, Aluminum, Brass.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	0.7	High-speed steel	Thread-cutting-related tool	For through hole	-	Non-Coated	NA	70

  From: 228,784 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S

  YAMAWA MFG

  5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	0.5 ～ 0.7	High-speed steel	Thread-cutting-related tool	For through hole / For blind hole	-	-	NA	57

  From: 627,613 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T

  YAMAWA MFG

  Provides simple check of pilot hole diameter. Uses high speed tool steel out of consideration for wear resistance. Can be used for either through holes or blind holes with margin.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	0.7	High-speed steel	Thread-cutting-related tool	-	-	-	NA	52

  From: 423,040 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  六角軸タッピングドリル

  RUKO

  【特長】・六角軸シャンク仕様で、コードレスドライバーに装着可能です。・鉄板等の下穴開け作業とネジ切り作業をドリルを交換せずに行うことができます。【用途】・穴あけ、ネジ山の形成・修正に。・被削材：鉄、アルミ、銅。

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	0.7	-	Thread-cutting-related tool	-	-	-	-	39

  From: 617,400 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  六角軸タッピングドリル（TiNコーティング）

  RUKO

  【特長】・六角軸シャンク仕様で、コードレスドライバーに装着可能です。・鉄板等の下穴開け作業とネジ切り作業をドリルを交換せずに行うことができます。【用途】・穴あけ、ネジ山の形成・修正に。・被削材：鉄、アルミ、銅、ステンレス。

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	0.7	-	Thread-cutting-related tool	-	-	-	-	39

  From: 980,280 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Union Tool Screw Cutting Tool

  UNION TOOL

  [Features]· Thread cutting tool for machining carbide alloys and hard brittle materials. (Thread mill type)· Enables direct engraving, dramatically improving efficiency and precision of discharge and grinding.· Uses a newly developed diamond coating with ultra high hardness for toughness and adhesive strength.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	-	-	0.7	-	Thread-cutting-related tool	-	-	Other	Available	50

  From: 10,007,911 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S

  YAMAWA MFG

  [Features]· (Straight type) Roll tap check pin that can be used to check several types of pilot hole diameters and pilot hole depth.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	0.7	High-speed steel	Thread-cutting-related tool	For blind hole	-	Non-Coated	NA	57

  From: 632,719 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T

  YAMAWA MFG

  [Features]· (Taper type) Roll tap pilot hole check pin that can be used to easily check pilot hole diameters with the 1 tool.· High-speed tool steel is used out of consideration for abrasion resistance.· Can be used for both through-holes and blind-holes if the latter has ample room.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	0.7	High-speed steel	Thread-cutting-related tool	For through hole / For blind hole	-	Non-Coated	NA	-

  From: 455,430 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Adjusters_SA

  YAMAWA MFG

  [Features]· Tap holder used to extend the tap length for use.· Can be used to make I series taps (ISP/IPO/IHT) longer.· Alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M4	Meter	-	150	-	Thread-cutting-related tool	-	-	Non-Coated	NA	122

  From: 3,607,230 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	ONISHI MANUFACTURING	ONISHI MANUFACTURING	ONISHI MANUFACTURING	YAMAWA MFG	YAMAWA MFG	RUKO	RUKO	UNION TOOL	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product SeriesDòng sản phẩm	Nut Tap Series Nut Tap NT	Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)	Hexagonal Shaft Tapping Drill	Hexagonal Shaft Tap (for Through Hole)	Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S	Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T	六角軸タッピングドリル	六角軸タッピングドリル（TiNコーティング）	Union Tool Screw Cutting Tool	Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S	Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T	Shank Adjusters_SA
From	1,259,620 VND	474,674 VND	806,943 VND	228,784 VND	627,613 VND	423,040 VND	617,400 VND	980,280 VND	10,007,911 VND	632,719 VND	455,430 VND	3,607,230 VND
Days to ShipSố ngày giao hàng	17 Day(s)	Same day	9 Day(s)	9 Day(s)	8 Day(s) or more	8 Day(s) or more	9 Day(s)	9 Day(s)	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s)
Screw size (Nominal)	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4	M4
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-	Meter	Meter	Meter
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Stainless steel (SUS)[○] / Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	-	-	-	-	-	-	-
Pitch (P), Number of Threading(mm)	0.5	0.7	0.7	0.7	0.5 ～ 0.7	0.7	0.7	0.7	0.7	0.7	0.7	150
Tool Material Type	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	-	-	-	High-speed steel	High-speed steel	-
Tap Type	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool	Thread-cutting-related tool
Hole type	-	For through hole	For through hole	For through hole	For through hole / For blind hole	-	-	-	-	For blind hole	For through hole / For blind hole	-
Chamfer threads (Lcf)	-	-	-	-	-	-	-	-	-	-	-	-
Coating Type	Non-Coated	TiN	Non-Coated	Non-Coated	-	-	-	-	Other	Non-Coated	Non-Coated	Non-Coated
Coating Y/N	NA	Available	NA	NA	NA	NA	-	-	Available	NA	NA	NA
Overall Length (L)(mm)	100	70	67	70	57	52	39	39	50	57	-	122

Loading...Tải…