(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
An online store for carbide reamers. With Misumi, a complete lineup of reamers with bottom blades that allow machining directly after pilot hole processing, straight reamers, helical reamers and spiral reamers with twisted blades, taper reamers, etc are available. By entering the specifications/dimensions such as
An online store for carbide reamers. With Misumi, a complete lineup of reamers with bottom blades that allow machining directly after pilot hole processing, straight reamers, helical reamers and spiral reamers with twisted blades, taper reamers, etc are available. By entering the specifications/dimensions such as biting length, blade length, blade diameter etc., the desired tool can be easily selected. By adding more conditions, tools suitable for machining can be selected. Original reamers capable of specifying the blade diameter in units of 0.005 mm.
[What is a carbide reamer?]
It is a reamer of cemented carbide material which adjusts the inner surface shape of drilled holes, etc., and finishes according to dimensions. Hand reamers are for manual handling while machine reamers are used for machining, cutting the inner surface of the machining hole.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
67 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
OSG
Cemented carbide is used for the cutting edge material.·Supply sufficient cutting fluid.·Use a chuck with high precision.·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 13.05 | - | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank / straight shank | NA | Straight | NA | - | - | - | - |
From: 963,333 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 12.1 | 3 ~ 45 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 519,142 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
[Features]· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 20.05 | 4 ~ 80 | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | straight shank | NA | Straight | NA | - | - | - | - |
From: 717,840 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 10.009 | 5 ~ 40 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 1,247,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 15.995 | 0.5 ~ 48 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]It is possible to mirror-finish drilled hole of general steel, and it is possible to drill without following pilot hole.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.9 ~ 14 | 20 ~ 70 | general steel[○] / Resin[○] / Alloy Steel[○] | straight shank | NA | Straight | NA | - | - | - | - |
From: 958,417 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.91 ~ 12.1 | 20 ~ 25 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 722,944 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OKAZAKI SEIKO
[Features]· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 26 ~ 31 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | straight shank | NA | Straight | NA | - | - | - | - |
From: 725,786 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type・ Flute tolerance 0 to +0.005・ 0.01-mm increments and 0.005-mm increments are added (Just dimensions ±0.03)
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.97 ~ 12.05 | 12 ~ 45 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | straight shank | NA | Straight | NA | - | - | - | - |
From: 649,290 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 5.995 | 0.5 ~ 34 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 15.995 | 0.5 ~ 48 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 10 | 12 ~ 40 | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
From: 829,294 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 5.9 | 3 ~ 10 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Step Reamer, Custom Dimensions Type
MISUMI
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
- | - | general steel[◎] / Aluminum[◎] | End Mill Shank | NA | Straight | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Reamer with Carbide Oil Hole for Stop Holes CSOER
EIKOSHA
Right torsion reamer for blind holes with oil hole and bottom blade
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 16 | 16 ~ 30 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | straight shank | NA | Spiral | Available | - | - | - | - |
From: 2,990,727 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Flute Chucking Reamer Straight Shank
DYC
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1.5 ~ 20 | 10 ~ 60 | - | straight shank | NA | - | NA | - | - | - | - |
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 5.995 | 0.5 ~ 34 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 15.995 | 0.5 ~ 48 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Long type allows machining of deep holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.4 ~ 5.995 | 0.5 ~ 34 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Reamer with Carbide Bottom Blade
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole·Even higher speed cutting is possible by adopting helical flutes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 10.01 | 20 ~ 30 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: 2,494,140 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Reamer with Carbide Bottom Blade
MISUMI
[Features]·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function·Direct reaming is possible without correction by an end mill after drilling a pilot hole
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 10.01 | 27 ~ 40 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | Available | - | - | - | - |
From: 1,581,436 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Regular Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 15.99 | 0.5 ~ 48 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Straight Reamer, Long Model
MISUMI
[Features]·Standard carbide straight reamer custom dimensions type·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length·Long type allows reaming of deep areas
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 5.99 | 0.5 ~ 34 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·High-speed cutting greatly improves efficiency compared to high-speed steel reamers·High-speed cutting is possible by adopting helical flutes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 10 | 25 ~ 40 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: 1,973,934 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Spiral Reamer, High-Precision Tolerance Model
MISUMI
[Features]·Achieves high-precision hole finishing by narrowing the cutting diameter tolerance width·High-speed cutting greatly improves efficiency compared to high-speed steel reamers·The long lifespan allows high-precision machining to be maintained for a long time.·Even higher speed cutting is possible by adopting helical flutes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 13 | 10 ~ 44 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: 805,106 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1.8 ~ 5 | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | End Mill Shank | NA | Straight | NA | - | - | - | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Step Reamer, Custom Dimensions / Long Shank Type
MISUMI
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
- | - | general steel[◎] / Aluminum[◎] | End Mill Shank | NA | Straight | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Pivot Reamer CSRR-3
EIKOSHA
Carbide straight reamer ideal for small diameter machining.[Features]· The shank is thick compared to the blade length, making it excellent in high durability and rigidity.· φ0.2-3 (0.2-3 mm diameter) types are available.[Applications]· Ideal for finish machining of ultra-small diameter holes.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 3 | 3 ~ 25 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | straight shank | NA | Straight | NA | - | - | - | - |
From: 940,661 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General purpose type. Wear-resistant carbide K type adopted
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
0.8 ~ 12.05 | 15 ~ 80 | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | straight shank | NA | Straight | NA | - | - | - | - |
From: 1,214,660 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 30 | 15 ~ 75 | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | straight shank | NA | Straight | NA | - | - | - | - |
From: 1,352,643 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
Straight reamer for 1/50 tapered hole processing (carbide).[Features]· Compared with conventional high-speed steel, carbide material is adopted to improve the high rigidity and abrasion resistance.· Provides excellent finish for high-hardness workpieces as well.[Applications]· For finish machining of 1/50 taper pin holes.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
- | 28 ~ 194 | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | straight shank | NA | Straight | NA | 1 ~ 13 | 1.46 ~ 16.74 | - | - |
From: 1,031,597 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
EIKOSHA
Spiral reamer (carbide) for gate drilling.[Features]· For mold pin point gate hole drilling.· A wide variety of tip rounding, blade length and angles are available.[Applications]· Finishing of pin gate holes.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
- | 25 ~ 60 | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | straight shank | NA | Spiral | NA | - | 1.42 ~ 9.01 | 0.5 ~ 2.5 | 1 ~ 5 |
From: 2,501,092 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FPTOOLS
[Features]· Cutting speed can be increased by 50% compared to carbide straight blade types.· Ideal for deep drilling: Long neck section.· Excellent anterior chip discharge: 30° torsion, left
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
1 ~ 15.5 | 8 ~ 45 | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎] | End Mill Shank | NA | Spiral | NA | - | - | - | - |
From: 1,809,820 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCCR Carbide Chucking Reamer (Straight Shank)
OKAZAKI SEIKO
[Features]・ Carbide tipped type, straight shank specification· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
12.5 ~ 30 | 36 ~ 46 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | straight shank | NA | Straight | NA | - | - | - | - |
From: 3,307,501 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCER Reamer with Carbide Teeth (Straight Shank)
OKAZAKI SEIKO
[Features]・ Carbide tipped type, straight shank specification· Reamer for complete blind hole, capable of cleanly machining bottom surfaces.· It uses an end mill shank
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
12.5 ~ 30 | 36 ~ 46 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | straight shank | NA | Spiral | Available | - | - | - | - |
From: 3,632,606 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCCRT Carbide Chucking Reamer (Morse Taper Shank)
OKAZAKI SEIKO
Carbide tipped type, morse taper shank specification. Deep hole drilling is possible with a neck diameter smaller than the blade diameter
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
12.5 ~ 30 | 36 ~ 46 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | Morse Taper Shank | NA | Straight | NA | - | - | - | - |
From: 3,632,606 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
BCHR Carbide Helical Reamer (Straight Shank)
OKAZAKI SEIKO
[Features]・ Carbide tipped type, straight shank specification· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter・ Left-helix angle shape enables exceptional stability when machining notched holes (keyways, etc.)
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
12.5 ~ 30 | 36 ~ 46 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | straight shank | NA | Helical | NA | - | - | - | - |
From: 3,307,501 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CCRM Carbide Chucking Reamer (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type· It is capable of deep drilling due to a neck diameter thinner than the cutting diameter
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 12.05 | 26 ~ 31 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | straight shank | NA | Straight | NA | - | - | - | - |
From: 764,033 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CEOR Reamer with Carbide Teeth (and with Oil Hole)
OKAZAKI SEIKO
[Features]· Solid type· Reamer for complete blind hole, capable of cleanly machining bottom surfaces.· It uses an end mill shank・ The shape of the lubrication hole allows for excellent chip discharge.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
5 ~ 12 | 26 ~ 31 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: 3,097,138 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CEORM Reamer with Carbide Teeth (and with Oil Hole) (Hundredths Range)
OKAZAKI SEIKO
A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted. Shape with oil hole discharges cutting chips smoothly.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
4.95 ~ 12.05 | 26 ~ 31 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: 3,575,233 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CER Reamer with Carbide End Flutes
OKAZAKI SEIKO
Solid type. With a reamer for complete blind holes, the bottom surface can also be processed cleanly. It uses end mill shank.
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 20 ~ 31 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: 1,968,833 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CERM Reamer with Carbide Teeth (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type· Reamer for complete blind hole, capable of cleanly machining bottom surfaces.· It uses an end mill shank
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 12.05 | 20 ~ 31 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: 2,485,176 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CERS Short Reamer with Carbide Teeth
OKAZAKI SEIKO
[Features]· Solid type・ Carbide reamer with end flute (CER) short type· For complete blind holes
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 6 ~ 25 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Spiral | Available | - | - | - | - |
From: 859,651 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CHRS Short Carbide Helical Reamer
OKAZAKI SEIKO
[Features]· Solid type・ Short type of carbide helical reamer (CHR)
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
10 | 35 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Helical | NA | - | - | - | - |
From: 2,198,318 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CHRSM Short Carbide Helical Reamer (Hundredths Range)
OKAZAKI SEIKO
[Features]· Solid type・ Short type of carbide helical reamer (CHRM)
Tool Diameter(mm) | Groove Length(mm) | work material | Shank Type | Coating Y/N | Groove Shape | Base Blade Y/N | Tip diameter | Large End Diameter | radius R | Both square |
---|---|---|---|---|---|---|---|---|---|---|
2.95 ~ 12.05 | 22 ~ 35 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | End Mill Shank | NA | Helical | NA | - | - | - | - |
From: 687,538 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Tool Diameter(mm) |
Groove Length(mm) |
work material |
Shank Type |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
radius R |
Both square |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | OSG | FPTOOLS | EIKOSHA | FPTOOLS | MISUMI | FPTOOLS | FPTOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | DYC | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | FPTOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO |
Product SeriesDòng sản phẩm | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model | CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range) | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model | CEORM Reamer with Carbide Teeth (and with Oil Hole) (Hundredths Range) | ||||||||||||||||||||||||||||||||||||
From | 963,333 VND | 519,142 VND | 717,840 VND | 1,247,050 VND | 958,417 VND | 722,944 VND | 725,786 VND | 649,290 VND | 829,294 VND | 2,990,727 VND | 2,494,140 VND | 1,581,436 VND | 1,973,934 VND | 805,106 VND | 940,661 VND | 1,214,660 VND | 1,352,643 VND | 1,031,597 VND | 2,501,092 VND | 1,809,820 VND | 3,307,501 VND | 3,632,606 VND | 3,632,606 VND | 3,307,501 VND | 764,033 VND | 3,097,138 VND | 3,575,233 VND | 1,968,833 VND | 2,485,176 VND | 859,651 VND | 2,198,318 VND | 687,538 VND | |||||||||||||
Days to ShipSố ngày giao hàng | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 7 Day(s) or more |
Tool Diameter(mm) | 0.3 ~ 13.05 | 0.2 ~ 12.1 | 0.4 ~ 20.05 | 0.5 ~ 10.009 | 0.3 ~ 15.995 | 0.9 ~ 14 | 2.91 ~ 12.1 | 3 ~ 12 | 0.97 ~ 12.05 | 0.4 ~ 5.995 | 0.4 ~ 15.995 | 1 ~ 10 | 0.5 ~ 5.9 | - | 2.95 ~ 16 | 1.5 ~ 20 | 0.3 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 3 ~ 10.01 | 3 ~ 10.01 | 0.3 ~ 15.99 | 0.3 ~ 5.99 | 3 ~ 10 | 1 ~ 13 | 1.8 ~ 5 | - | 0.2 ~ 3 | 0.8 ~ 12.05 | 1 ~ 30 | - | - | 1 ~ 15.5 | 12.5 ~ 30 | 12.5 ~ 30 | 12.5 ~ 30 | 12.5 ~ 30 | 2.95 ~ 12.05 | 5 ~ 12 | 4.95 ~ 12.05 | 3 ~ 12 | 2.95 ~ 12.05 | 3 ~ 12 | 10 | 2.95 ~ 12.05 |
Groove Length(mm) | - | 3 ~ 45 | 4 ~ 80 | 5 ~ 40 | 0.5 ~ 48 | 20 ~ 70 | 20 ~ 25 | 26 ~ 31 | 12 ~ 45 | 0.5 ~ 34 | 0.5 ~ 48 | 12 ~ 40 | 3 ~ 10 | - | 16 ~ 30 | 10 ~ 60 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 20 ~ 30 | 27 ~ 40 | 0.5 ~ 48 | 0.5 ~ 34 | 25 ~ 40 | 10 ~ 44 | - | - | 3 ~ 25 | 15 ~ 80 | 15 ~ 75 | 28 ~ 194 | 25 ~ 60 | 8 ~ 45 | 36 ~ 46 | 36 ~ 46 | 36 ~ 46 | 36 ~ 46 | 26 ~ 31 | 26 ~ 31 | 26 ~ 31 | 20 ~ 31 | 20 ~ 31 | 6 ~ 25 | 35 | 22 ~ 35 |
work material | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Resin[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Aluminum[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Aluminum[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] |
Shank Type | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | straight shank | straight shank | End Mill Shank | straight shank | straight shank | Morse Taper Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
Groove Shape | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Spiral | - | Straight | Straight | Straight | Spiral | Straight | Straight | Straight | Spiral | Spiral | Straight | Straight | Straight | Straight | Straight | Straight | Spiral | Spiral | Straight | Spiral | Straight | Helical | Straight | Spiral | Spiral | Spiral | Spiral | Spiral | Helical | Helical |
Base Blade Y/N | NA | NA | NA | NA | Available | NA | NA | NA | NA | Available | Available | NA | NA | - | Available | NA | Available | Available | Available | Available | Available | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | Available | Available | Available | Available | Available | NA | NA |
Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 13 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.46 ~ 16.74 | 1.42 ~ 9.01 | - | - | - | - | - | - | - | - | - | - | - | - | - |
radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Both square | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy