Chamfering / Centering Tools（Application：Hole Chamfer）

• You can add up to 6 items per a category to the compare list. Compare

  

  H.S.S Center Drill

  YG 1

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Vanadium High Speed Steel	-	120˚	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	-	NA	Non-Coated	-

  From: 133,536 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Starting Drills for Chamfering (90°), Coated_NC-SD-V

  YAMAWA MFG

  A drill for chamfering the end face after drilling with a drill.[Features]· Adopts cobalt high-speed steel with excellent wear resistance.[Applications]· By using NC-SD V, larger than the diameter after hole drilling, cleanly-finished chamfered surfaces can be achieved.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 25	90°	Hole Chamfer	-	Single blade	NA	Available	TiN	-

  From: 446,341 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill VP-LDS

  OSG

  V coating allows longer lifespan than TIN-NC-LDS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Single blade	NA	Available	TiCN	-

  From: 471,340 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90° TiCN Coating

  IWATA TOOL

  [Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: 289,758 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill A Type 60°

  MAGAFOR

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	60˚	Hole Chamfer	general steel[○] / Aluminum[○]	-	-	Available	HSS	-

  From: 561,234 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables faster and longer lifespan than NC-LDS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60 ～ 120	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Single blade	NA	Available	TiN	-

  From: 426,667 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 90°, ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 6	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 739,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set

  MISUMI

  Frequently used standard sizes are offered in a set at an affordable price

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3/8.3/10.4/12.4/16.5/20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: 2,801,919 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 60° ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 6	60	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 739,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Helix Center Drills-Type A 60°_CE-S

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60°	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Double-edged	NA	NA	-	-

  From: 113,023 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill Standard NC-LDS

  OSG

  Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	90 ～ 130	Hole Chamfer	general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	NA	Non-Coated	-

  From: 278,333 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90゜, Long Type, TiCN Coating

  IWATA TOOL

  [Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.5 ～ 5	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: 739,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink, HSS, No Coating 90°

  ILIX

  Features●Less likely to generate secondary burrs and durable, that makes efficient work possible.●Can be used both in machine work and manual work.Usage●Work Material: Steel, Alloy Steel, Stainless Steel, Copper Alloy, Aluminum AlloySpecification●3 Blades●Tip Angle: 90°●No CoatingMaterials●High Speed Steel（HSS）

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 37	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	NA	Non-Coated	-

  From: 697,961 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center 90°

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.03 ～ 6	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: 563,011 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]· Extended life with excellent thermal and abrasion resistance thanks to the titanium coating.· Finest surface finish without any chatter marks.[Applications]· Work materials: Aluminum, stainless steel, iron, resin, copper.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiN	-

  From: 694,616 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated High-Speed Steel Countersink / 3-Flute / 90°

  MISUMI

  Necessities in hole chamfering and deburring are available at low prices

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 20.5	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: 620,147 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN-Coated High-Speed Steel Countersink, with Holes / 90°

  MISUMI

  Frequently used standard sizes are offered at affordable prices

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 35	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: 499,003 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Spot Drill

  Nine9

  Insert for NC spot drill holder.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1–6 ～ 3 to 15	60 ～ 90	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiAlN / TiN / DLC	-

  From: 864,189 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack

  MISUMI

  TiAlN coated type of the popular spot drill

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	2 ～ 12	90	Hole Chamfer	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiAlN	-

  From: 357,693 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Drills 90°_PE-Q

  YAMAWA MFG

  The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 20	125°	Hole Chamfer	-	Double-edged	NA	NA	-	-

  From: 374,918 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank High Helix Center Drills-Type A 90°_CE-QL

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 12	90°	Hole Chamfer	-	Double-edged	NA	NA	-	-

  From: 979,461 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counterbore

  YG 1

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3.2 ～ 21	-	Hole Chamfer	general steel[○]	-	-	NA	-	-

  From: 489,643 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink / Three-Flute Type

  YG 1

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 50	-	Hole Chamfer	general steel[○]	-	-	Available	TiCN	-

  From: 795,792 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide NC Spot Drill

  MISUMI

  The non-coated design allows the edge of the tip to stand, achieving the high cut-off performance.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 2	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	Single blade	NA	NA	-	-

  From: 1,306,240 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  By using a sharp cutting helical blade, you can obtain a clean machined surface with less burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	-	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	TiCN	-

  From: 1,728,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spot Drill / Corner Radius Cutter for 90°

  Nine9

  Carbide insert type NC spot drill. High efficiency! Low cost! Ideal for CNC lathes and machining centers. Inserts that can process corner radii can also be used.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	16 ～ 20	90	Hole Chamfer	-	Single blade	NA	NA	Non-Coated	-

  From: 3,598,984 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-Cutter Mini, Multi-Flute Front/Back-Chamfering Type

  BIG DAISHOWA SEIKI

  [Features]· Multiple-flute type front and back chamfering "C-Cutter Mini" high performance chamfering cutter that achieves ultra-high feed rates and a compact size.· Ultra-high feed machining achieves dramatic reductions in chamfering time.· Supports a wide range of machining, such as front chamfering, back chamfering, and face milling.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	45°	Hole Chamfer	-	-	NA	-	-	-

  From: 3,759,953 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Boy

  BIG DAISHOWA SEIKI

  [Features]·Accurate positioning of drilled holes and chamfering are performed at once.·High-precision indexable bit with excellent sharpness.·The cutting edge can be replaced, eliminating the need for regrinding.·It is a long shank type with little work interference.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90 ～ 120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	NA	Available	TiN	-

  From: 2,955,023 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Chamfer (A90)

  CARMEX

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	1.5 ～ 12	90	Hole Chamfer	-	-	-	-	-	-

  From: 2,734,490 VND
  Days to Ship: Số ngày giao hàng: 23 Day(s)

  23 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated / Non-Coated High-Speed Steel NC Spot Drill

  MISUMI

  Long service life that's made possible by the coating technology. Ideal for Hole Chamfering and Centering

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	2 ～ 20	90 ～ 120	Hole Chamfer	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available / NA	TiN / Non-Coated	-

  From: 215,820 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Countersink, with Holes / 90°

  MISUMI

  It is effective in hole chamfering and deburring of light metals.

  • Volume Discount

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 25	-	Hole Chamfer	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	Single blade	NA	Available	TiAlN	-

  From: 561,710 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  MISUMI

  [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Available	AlCrN	-

  From: 1,200,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	16 ～ 25	90	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	NA	Available	TiAlN	-

  From: 12,045,050 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Center reamer

  FUKUDA

  A cutting tool used for finishing the center hole and chamfering.[Features]·Because it is designed with an odd number of flutes, machining with little chatter is possible.·A rich lineup of 60°, 90° and 120°.[Applications]·Ideal for finishing center holes, as well as chamfering corners.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	60 ～ 120	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 523,274 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Helix Center Drills-JIS Type A 60°_CESA

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3.15 ～ 25	60°	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Double-edged	NA	NA	-	-

  From: 131,340 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Starting Drill GSS

  EIKOSHA

  Drill for positioning and chamfering.[Features]· TiN coating achieves longer life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 25	90 ～ 135	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	Available	TiN	-

  From: 460,973 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink / One-Flute Type

  YG 1

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 50	-	Hole Chamfer	general steel[○]	-	-	Available	TiCN	-

  From: 766,012 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  H.S.S Center Drill Long Series

  YG 1

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-vanadium High Speed Steel	-	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	-	NA	Non-Coated	-

  From: 327,786 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-UCS Hole Chamfering, Countersink, V Coating

  OSG

  High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	60 ～ 120	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Single blade	Available	Available	Other	-

  From: 681,830 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS SP Center 120°

  IWATA TOOL

  [Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.9 ～ 25	120	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade / Double-edged	NA	NA	-	-

  From: 173,025 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide DLC Coating

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	90	Hole Chamfer	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: 2,149,554 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink【1-6 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]· It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.· It easily expels chips because it uses 3 flute edges, providing a beautiful finish.[Applications]· Work materials: Iron, casting, stainless steel.· Chamfering.· Deburring.· For countersinking.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	NA	NA	-	-

  From: 418,225 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Drills 90°, Coated_PE-Q-V

  YAMAWA MFG

  The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 20	125°	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Double-edged	NA	Available	TiCN	-

  From: 759,558 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Helix Center Drills-Type A 60°, Coated_CE-S-V

  YAMAWA MFG

  Centering hole drill with a coating suitable for soft materials and relatively viscous materials thanks to its groove with high torsion.[Features]· Since it has a coating, stable processing is possible even if the cutting speed is increased, and the tool life is improved.[Applications]· Used for A-type 60° center drilling.· Guidelines for machining requirements are, carbon steel 15-30, steel alloy 10-25, stainless steel 5-12, and cast iron: 8-15 m/min.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4 ～ 18	60°	Hole Chamfer	-	Double-edged	NA	Available	TiN	-

  From: 422,606 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Corner R Cutter (Half) MCRC

  EIKOSHA

  [Features]· It is a round chamfering cutter whose tip diameter is unified at φ2.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 19	-	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	NA	-	0.5 ～ 8

  From: 2,363,801 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	YG 1	YAMAWA MFG	OSG	IWATA TOOL	MAGAFOR	OSG	IWATA TOOL	MISUMI	IWATA TOOL	YAMAWA MFG	OSG	IWATA TOOL	ILIX	IWATA TOOL	TRUSCO NAKAYAMA	MISUMI	MISUMI	Nine9	MISUMI	YAMAWA MFG	YAMAWA MFG	YG 1	YG 1	MISUMI	OSG	Nine9	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	CARMEX	MISUMI	MISUMI	MISUMI	OSG	FUKUDA	YAMAWA MFG	EIKOSHA	YG 1	YG 1	OSG	IWATA TOOL	IWATA TOOL	TRUSCO NAKAYAMA	YAMAWA MFG	YAMAWA MFG	EIKOSHA
Product SeriesDòng sản phẩm	H.S.S Center Drill	NC Starting Drills for Chamfering (90°), Coated_NC-SD-V	Leading Drill VP-LDS	HSS, SP Center, 90° TiCN Coating	Center Drill A Type 60°	Leading Drill TIN-NC-LDS	Carbide SP Center, 90°, ALD Coating	TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set	Carbide SP Center 60° ALD Coating	High Helix Center Drills-Type A 60°_CE-S	Leading Drill Standard NC-LDS	HSS, SP Center, 90゜, Long Type, TiCN Coating	Straight Shank, Countersink, HSS, No Coating 90°	Carbide SP Center 90°	Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】	TiN Coated High-Speed Steel Countersink / 3-Flute / 90°	TiN-Coated High-Speed Steel Countersink, with Holes / 90°	Insert for Spot Drill	TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack	Point Drills 90°_PE-Q	Long Shank High Helix Center Drills-Type A 90°_CE-QL	Counterbore	Counter Sink / Three-Flute Type	Carbide NC Spot Drill	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	NC Spot Drill / Corner Radius Cutter for 90°	C-Cutter Mini, Multi-Flute Front/Back-Chamfering Type	Center Boy	Mini Chamfer (A90)	TiN Coated / Non-Coated High-Speed Steel NC Spot Drill	TiAlN Coated High-Speed Steel Countersink, with Holes / 90°	XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type	Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS	Center reamer	High Helix Center Drills-JIS Type A 60°_CESA	Starting Drill GSS	Counter Sink / One-Flute Type	H.S.S Center Drill Long Series	V-UCS Hole Chamfering, Countersink, V Coating	HSS SP Center 120°	Toglon Sharp SP 90° Carbide DLC Coating	Counter Sink【1-6 Pieces Per Package】	Point Drills 90°, Coated_PE-Q-V	High Helix Center Drills-Type A 60°, Coated_CE-S-V	Mini Corner R Cutter (Half) MCRC
CADCAD																2D / 3D			2D / 3D					2D / 3D						2D / 3D		2D / 3D
From	133,536 VND	446,341 VND	471,340 VND	289,758 VND	561,234 VND	426,667 VND	739,665 VND	2,801,919 VND	739,665 VND	113,023 VND	278,333 VND	739,665 VND	697,961 VND	563,011 VND	694,616 VND	620,147 VND	499,003 VND	864,189 VND	357,693 VND	374,918 VND	979,461 VND	489,643 VND	795,792 VND	1,306,240 VND	1,728,333 VND	3,598,984 VND	3,759,953 VND	2,955,023 VND	2,734,490 VND	215,820 VND	561,710 VND	1,200,000 VND	12,045,050 VND	523,274 VND	131,340 VND	460,973 VND	766,012 VND	327,786 VND	681,830 VND	173,025 VND	2,149,554 VND	418,225 VND	759,558 VND	422,606 VND	2,363,801 VND
Days to ShipSố ngày giao hàng	Same day or more	6 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	Same day	6 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	Same day or more	Same day or more	Same day or more	6 Day(s) or more	4 Day(s) or more	9 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	17 Day(s)	6 Day(s) or more	9 Day(s)	9 Day(s) or more	23 Day(s)	Same day or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	Same day or more	7 Day(s) or more
Tool Material Type	Vanadium High Speed Steel	Cobalt HSS	Powder high-speed steel	High-speed steel	-	High-speed steel	Carbide	High-speed steel	Carbide	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	High-speed steel	High-speed steel	Cobalt HSS	Carbide	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	Carbide	Powder high-speed steel	-	-	High-speed steel	-	Cobalt HSS	Cobalt HSS	Carbide	Carbide	High-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	High-vanadium High Speed Steel	High-speed steel	High-speed steel	Carbide	Cobalt HSS	High-speed steel	High-speed steel	Cobalt HSS
Tool Diameter (D)(mm)	-	3 ～ 25	3 ～ 25	0.3 ～ 9	-	3 ～ 25	0.1 ～ 6	6.3/8.3/10.4/12.4/16.5/20.5	0.1 ～ 6	3 ～ 25	3 ～ 25	0.5 ～ 5	6.3 ～ 37	0.03 ～ 6	-	6.3 ～ 20.5	10 ～ 35	1–6 ～ 3 to 15	2 ～ 12	4 ～ 20	4 ～ 12	3.2 ～ 21	10 ～ 50	0.3 ～ 2	-	16 ～ 20	-	-	1.5 ～ 12	2 ～ 20	10 ～ 25	3 ～ 12	16 ～ 25	-	3.15 ～ 25	3 ～ 25	10 ～ 50	-	4.3 ～ 37	0.9 ～ 25	1.2 ～ 16	-	3 ～ 20	4 ～ 18	3 ～ 19
Tip angle (θ)	120˚	90°	90	90	60˚	60 ～ 120	90	-	60	60°	90 ～ 130	90	90	90	90	-	-	60 ～ 90	90	125°	90°	-	-	-	-	90	45°	90 ～ 120	90	90 ～ 120	-	-	90	60 ～ 120	60°	90 ～ 135	-	-	60 ～ 120	120	90	90	125°	60°	-
Application	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	general steel[○]	general steel[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	-	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Single blade, two blades	-	Single blade	Single blade	Single blade / Double-edged	-	Single blade	Single blade / Double-edged	Single blade	Single blade / Double-edged	Double-edged	Single blade	Single blade / Double-edged	Single blade	Single blade / Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Double-edged	Double-edged	-	-	Single blade	Single blade	Single blade	-	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Double-edged	-	-	-	Single blade	Single blade / Double-edged	Single blade	Single blade	Double-edged	Double-edged	-
Peripheral Blade Y/N	-	NA	NA	NA	-	NA	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	-	-	NA	NA	NA	NA	NA	-	NA	NA	Available	NA	NA	NA	-	-	-	Available	NA	NA	NA	NA	NA	-
Coating Y/N	NA	Available	Available	Available	Available	Available	Available	Available	Available	NA	NA	Available	NA	NA	Available	Available	Available	Available	Available	NA	NA	NA	Available	NA	Available	NA	-	Available	-	Available / NA	Available	Available	Available	NA	NA	Available	Available	NA	Available	NA	Available	NA	Available	Available	NA
Coating Type	Non-Coated	TiN	TiCN	TiCN	HSS	TiN	Other	TiN	Other	-	Non-Coated	TiCN	Non-Coated	-	TiN	TiN	TiN	TiAlN / TiN / DLC	TiAlN	-	-	-	TiCN	-	TiCN	Non-Coated	-	TiN	-	TiN / Non-Coated	TiAlN	AlCrN	TiAlN	Non-Coated	-	TiN	TiCN	Non-Coated	Other	-	DLC	-	TiCN	TiN	-
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 ～ 8

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	YG 1	YAMAWA MFG	OSG	IWATA TOOL	MAGAFOR	OSG	IWATA TOOL	MISUMI	IWATA TOOL	YAMAWA MFG	OSG	IWATA TOOL	ILIX	IWATA TOOL	TRUSCO NAKAYAMA	MISUMI	MISUMI	Nine9	MISUMI	YAMAWA MFG	YAMAWA MFG	YG 1	YG 1	MISUMI	OSG	Nine9	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	CARMEX	MISUMI	MISUMI	MISUMI	OSG	FUKUDA	YAMAWA MFG	EIKOSHA	YG 1	YG 1	OSG	IWATA TOOL	IWATA TOOL	TRUSCO NAKAYAMA	YAMAWA MFG	YAMAWA MFG	EIKOSHA
Product SeriesDòng sản phẩm	H.S.S Center Drill	NC Starting Drills for Chamfering (90°), Coated_NC-SD-V	Leading Drill VP-LDS	HSS, SP Center, 90° TiCN Coating	Center Drill A Type 60°	Leading Drill TIN-NC-LDS	Carbide SP Center, 90°, ALD Coating	TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set	Carbide SP Center 60° ALD Coating	High Helix Center Drills-Type A 60°_CE-S	Leading Drill Standard NC-LDS	HSS, SP Center, 90゜, Long Type, TiCN Coating	Straight Shank, Countersink, HSS, No Coating 90°	Carbide SP Center 90°	Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】	TiN Coated High-Speed Steel Countersink / 3-Flute / 90°	TiN-Coated High-Speed Steel Countersink, with Holes / 90°	Insert for Spot Drill	TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack	Point Drills 90°_PE-Q	Long Shank High Helix Center Drills-Type A 90°_CE-QL	Counterbore	Counter Sink / Three-Flute Type	Carbide NC Spot Drill	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	NC Spot Drill / Corner Radius Cutter for 90°	C-Cutter Mini, Multi-Flute Front/Back-Chamfering Type	Center Boy	Mini Chamfer (A90)	TiN Coated / Non-Coated High-Speed Steel NC Spot Drill	TiAlN Coated High-Speed Steel Countersink, with Holes / 90°	XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type	Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS	Center reamer	High Helix Center Drills-JIS Type A 60°_CESA	Starting Drill GSS	Counter Sink / One-Flute Type	H.S.S Center Drill Long Series	V-UCS Hole Chamfering, Countersink, V Coating	HSS SP Center 120°	Toglon Sharp SP 90° Carbide DLC Coating	Counter Sink【1-6 Pieces Per Package】	Point Drills 90°, Coated_PE-Q-V	High Helix Center Drills-Type A 60°, Coated_CE-S-V	Mini Corner R Cutter (Half) MCRC

Loading...Tải…