Chamfering / Centering Tools（Application：Other）

• You can add up to 6 items per a category to the compare list. Compare

  

  Submarine Gate Cutter, 20°, 30°_CS-G

  YAMAWA MFG

  A specialized drill for use when machining submarine gates (tunnel gates) in the dies used for plastic injection molding.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6 ～ 8	20 ～ 30	Other	-	Single blade	NA	NA	-	-

  From: 604,505 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  V Men-Maru C-MPE-V

  THE CUT

  [Features]· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly l...Readmore

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60 ～ 120	Other	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,146,513 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid V point mill VSE VSESS type

  DIJET

  It is a tool with excellent abrasion resistance.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60 ～ 120	Other	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	-	NA	Non-Coated	-

  From: 1,769,716 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Super Mentori-Maru ZERO For Automatic Lathes, MTMS

  THE CUT

  [Features]· Employs shank diameters of ø7 and ø10 specialized for automatic lathes.· Capable of spot cutting.· Dedicated insert for nose R0.4 further improves positioning precision.· A type in which the insert can be interchanged so no regrinding/repolishing required.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	13	-	Other	-	-	-	-	-	-

  From: 3,903,513 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center chamfer mill

  FUKUDA

  A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	4 ～ 40	60 ～ 120	Other	general steel[○] / Cast Iron[○] / Resin[○]	Single blade	Available	NA	Non-Coated	-

  From: 1,291,831 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carving Cutter for 45°

  Nine9

  An innovative carbide insert type engraving tool. High-quality engraving is possible on most material.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6	45	Other	-	Single blade	NA	NA	Non-Coated	-

  From: 2,765,287 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carving Cutter for 60°

  Nine9

  An innovative carbide insert type engraving tool. High-quality engraving is possible on most material.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	6	60	Other	-	Single blade	NA	NA	Non-Coated	-

  From: 2,762,336 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfer/Deburring Tool Set【8 Pieces Per Package】

  NOGA JAPAN

  [Features]・ Universal deburring set・ Deburring on the surface and deep holes is possible

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Other	-	-	-	-	-	-

  From: 1,091,783 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfer/Deburring Tool Set CS7000

  NOGA JAPAN

  [Features]· Comes with a countersink adapter that can be easily mounted on power tools such as electric drills.[Applications]· Hole chamfering and outer diameter chamfering

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Other	-	-	-	-	-	-

  From: 204,908 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Noga, Grip Handle (for Holder)

  NOGA JAPAN

  [Features]·Holder for NG3610 triangular scraperOverall length (mm): 113Unit of Purchase: 1 pair

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Other	-	-	-	-	-	-

  From: 194,746 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade for Chamfer/Deburring【6-10 Pieces Per Package】

  NOGA JAPAN

  [Features]A blade for chamfering and deburring.Compatible main body: Compatible holder (EL04003), compatible handle (NG3000), compatible holder (UH1000, SC1400), compatible handle (NC5100), compatible handle (NC5200)

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	-	Other	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	-	-	-

  From: 818,661 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tools for Cleaning Metal Scraps Chip Hook Set

  NOGA JAPAN

  [Features]・ A shovel for swarf cutting (SP2600) can be attached to the insert hook[Applications]・ For cleaning metal cutting chips produced by cutting such as lathes

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Other	-	-	-	-	-	-

  From: 196,655 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V

  THE CUT

  [Features]· No need to turn over the work material. (Also removes through-hole burrs)· Both sides can be chamfered with the one cutter tool.· Ultra-fine particle carbide with TiAlN coating for a longer tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2.8 ～ 12	90°	Other	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 4,179,611 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Super Mentori-Maru ZERO, MTMS

  THE CUT

  [Features]· Capable of spot cutting.· A type in which the insert can be interchanged so no regrinding/repolishing required.· Features a highly rigid body and dedicated insert for high-efficiency machining.· Can be used like an end mill for machining materials from an un-machined state.· Positioning precision is further increased for nose R0.4.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	12 ～ 15.2	-	Other	-	-	-	-	-	-

  From: 3,903,513 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Chamfering Cutter Super Mentori-Maru MTMS 20/30

  THE CUT

  [Features]· Can be used like an end mill for machining materials from an un-machined state.· Capable of ramping machining (α = 3°).· Standard positive inserts of various manufacturers are mountable.· Capable of high speed machining because of the 3-flute/4-flute design.· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.· The high rigidity body design and 3-face restraint ensure it ...Readmore

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Other	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	-	-	-	-

  From: 7,668,513 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Chamfering Cutter Super Mentori-Maru MTMS 6.5/9

  THE CUT

  [Features]· Uses a positive lathe insert for a light cutting sharpness.· Standard positive inserts of various manufacturers are mountable.· Capable of high speed machining because of the 3-flute design.· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used (however, the screws need to be changed).· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.· With th...Readmore

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Other	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	-	-	-	-

  From: 6,037,011 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Super Mentori-Maru ZERO For Lathes, NC-MT

  THE CUT

  [Features]· An internal lubrication specification and shank design specialized for use with a lathe.· Capable of spot cutting.· A type in which the insert can be interchanged so no regrinding/repolishing required.· Features a highly rigid body and dedicated insert for high-efficiency machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	12 ～ 14.5	-	Other	-	-	-	-	-	-

  From: 5,158,513 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	YAMAWA MFG	THE CUT	DIJET	THE CUT	FUKUDA	Nine9	Nine9	NOGA JAPAN	NOGA JAPAN	NOGA JAPAN	NOGA JAPAN	NOGA JAPAN	THE CUT	THE CUT	THE CUT	THE CUT	THE CUT
Product SeriesDòng sản phẩm	Submarine Gate Cutter, 20°, 30°_CS-G	V Men-Maru C-MPE-V	Solid V point mill VSE VSESS type	Super Mentori-Maru ZERO For Automatic Lathes, MTMS	Center chamfer mill	Carving Cutter for 45°	Carving Cutter for 60°	Chamfer/Deburring Tool Set【8 Pieces Per Package】	Chamfer/Deburring Tool Set CS7000	Noga, Grip Handle (for Holder)	Blade for Chamfer/Deburring【6-10 Pieces Per Package】	Tools for Cleaning Metal Scraps Chip Hook Set	Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V	Super Mentori-Maru ZERO, MTMS	Chamfering Cutter Super Mentori-Maru MTMS 20/30	Chamfering Cutter Super Mentori-Maru MTMS 6.5/9	Super Mentori-Maru ZERO For Lathes, NC-MT
From	604,505 VND	2,146,513 VND	1,769,716 VND	3,903,513 VND	1,291,831 VND	2,765,287 VND	2,762,336 VND	1,091,783 VND	204,908 VND	194,746 VND	818,661 VND	196,655 VND	4,179,611 VND	3,903,513 VND	7,668,513 VND	6,037,011 VND	5,158,513 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	9 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more
Tool Material Type	High-speed steel	Carbide	Carbide	-	Cobalt HSS	-	-	-	-	-	High-speed steel	-	Carbide	-	-	-	-
Tool Diameter (D)(mm)	6 ～ 8	3 ～ 20	3 ～ 20	13	4 ～ 40	6	6	-	-	-	-	-	2.8 ～ 12	12 ～ 15.2	-	-	12 ～ 14.5
Tip angle (θ)	20 ～ 30	60 ～ 120	60 ～ 120	-	60 ～ 120	45	60	-	-	-	-	-	90°	-	-	-	-
Application	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other
work material	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	general steel[○] / Cast Iron[○] / Resin[○]	-	-	-	-	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-
Single blade, two blades	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	-	-	-	-	-	Single blade	-	-	-	-
Peripheral Blade Y/N	NA	-	-	-	Available	NA	NA	-	-	-	-	-	-	-	-	-	-
Coating Y/N	NA	Available	NA	-	NA	NA	NA	-	-	-	-	-	Available	-	-	-	-
Coating Type	-	TiAlN	Non-Coated	-	Non-Coated	Non-Coated	Non-Coated	-	-	-	-	-	TiAlN	-	-	-	-
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	YAMAWA MFG	THE CUT	DIJET	THE CUT	FUKUDA	Nine9	Nine9	NOGA JAPAN	NOGA JAPAN	NOGA JAPAN	NOGA JAPAN	NOGA JAPAN	THE CUT	THE CUT	THE CUT	THE CUT	THE CUT
Product SeriesDòng sản phẩm	Submarine Gate Cutter, 20°, 30°_CS-G	V Men-Maru C-MPE-V	Solid V point mill VSE VSESS type	Super Mentori-Maru ZERO For Automatic Lathes, MTMS	Center chamfer mill	Carving Cutter for 45°	Carving Cutter for 60°	Chamfer/Deburring Tool Set【8 Pieces Per Package】	Chamfer/Deburring Tool Set CS7000	Noga, Grip Handle (for Holder)	Blade for Chamfer/Deburring【6-10 Pieces Per Package】	Tools for Cleaning Metal Scraps Chip Hook Set	Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V	Super Mentori-Maru ZERO, MTMS	Chamfering Cutter Super Mentori-Maru MTMS 20/30	Chamfering Cutter Super Mentori-Maru MTMS 6.5/9	Super Mentori-Maru ZERO For Lathes, NC-MT

Loading...Tải…