Chamfering / Centering Tools（work material：Stainless Steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables faster and longer lifespan than NC-LDS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer	Stainless Steel[◎]	Single blade	NA	Available	TiN	-

  From: 426,667 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  H.S.S Center Drill

  YG 1

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Vanadium High Speed Steel	-	120˚	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	-	-	NA	Non-Coated	-

  From: 133,536 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]· Extended life with excellent thermal and abrasion resistance thanks to the titanium coating.· Finest surface finish without any chatter marks.[Applications]· Work materials: Aluminum, stainless steel, iron, resin, copper.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	90	Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	TiN	-

  From: 694,616 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90° TiCN Coating

  IWATA TOOL

  [Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade / Double-edged	NA	Available	TiCN	-

  From: 289,758 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Point Drills 90°, Coated_PE-Q-V

  YAMAWA MFG

  The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 20	125°	Centering (Positioning) / Hole Chamfer	Stainless Steel[○]	Double-edged	NA	Available	TiCN	-

  From: 759,558 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tips for Chibimomi C22GUX

  FUJIGEN

  An indexable insert for Chibimomi that can be used for center spotting and chamfering.[Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	Stainless Steel[○]	-	-	Available	TiAlN	-

  From: 645,830 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coated High-Speed Steel Countersink / 3-Flute / 90°

  MISUMI

  Necessities in hole chamfering and deburring are available at low prices

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 20.5	-	Hole Chamfer	Stainless Steel[○]	Single blade	NA	Available	TiN	-

  From: 620,147 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for Ecomen / Ecomen 2 TXMT16T306

  FUJIGEN

  An indexable insert that can perform chamfering.Compatible models: Ecomen / Ecomen 2 / Choumen / Choumen B[Applications]Used for chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	Stainless Steel[○]	-	-	Available	AlCrN	-

  From: 583,902 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Helix Center Drills-Type A 60°_CE-S

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	60°	Centering (Positioning) / Hole Chamfer	Stainless Steel[○]	Double-edged	NA	NA	-	-

  From: 113,023 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

  7 LEADERS

  [Features]· 90° Carbide 2-Flute Chamfering V-Grooving End Mill· Use for V-grooving, horizontal chamfering, centering, hole chamfering.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Suitable for a wide range of work materials from general steel to aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	-	-	Available	Other	-

  From: 907,353 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Center Drill, 90° Chamfering Model

  MISUMI

  The 90° type that's simultaneously capable of chamfering

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	Stainless Steel[○]	Double-edged	NA	Available	TiAlN	-

  From: 323,248 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  Leading Drill VP-LDS

  OSG

  V coating allows longer lifespan than TIN-NC-LDS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Stainless Steel[○]	Single blade	NA	Available	TiCN	-

  From: 471,340 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS Center Drill, A Type, 60°, TiCN Coating

  IWATA TOOL

  [Features]· A center drill with high sharpness and outstanding durability.· Iwata Tool's center drills never stop evolving.· In addition to improving runout accuracy, the use of cobalt HSS and an optimized tool shape deliver excellent sharpness and help prevent breakages.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.5 ～ 5	60	Centering (Positioning)	Stainless Steel[○]	Double-edged	NA	Available	TiCN	-

  From: 420,523 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill 2-Flute

  MISUMI

  [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	AlCrN	-

  From: 935,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide SP Center, 90°, ALD Coating

  IWATA TOOL

  [Features]· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 6	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade / Double-edged	NA	Available	Other	-

  From: 739,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, Type 1, G Coating 60°

  OKABE

  Because it is made of high-speed steel, it has high hardness. It is a center drill manufactured with one of the best heat treatment, making it suitable for machining general steel, stainless steel, cast iron and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9.5	60	Centering (Positioning)	Stainless Steel[○]	Double-edged	NA	Available	TiN	-

  From: 38,704 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]·Ideal for chamfering and V-groove·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	NA	Available	TS	-

  From: 1,763,476 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink, HSS, TiAlN Coating 90°

  ILIX

  Ideal for chamfering, countersinking, and deburring. Can be used for both machine work and manual work. For SUS and difficult-to-cut material.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	8.3 ～ 37	90	Hole Chamfer	Stainless Steel[◎]	Single blade	Available	Available	TiAlN	-

  From: 1,106,744 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Counter Sink【1-6 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]· It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.· It easily expels chips because it uses 3 flute edges, providing a beautiful finish.[Applications]· Work materials: Iron, casting, stainless steel.· Chamfering.· Deburring.· For countersinking.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	-	90	Hole Chamfer	Stainless Steel[○]	Single blade	NA	NA	-	-

  From: 418,225 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • Volume Discount

  • TiCN
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	10 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	Available	-	-

  From: 1,373,122 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  TiN Coated / Non-Coated High-Speed Steel NC Spot Drill

  MISUMI

  Long service life that's made possible by the coating technology. Ideal for Hole Chamfering and Centering

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	2 ～ 20	90 ～ 120	Centering (Positioning) / Hole Chamfer	Stainless Steel[○]	Single blade	NA	Available	TiN	-

  From: 259,193 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Center Drill, Regular Model

  MISUMI

  TiAlN coated type of the popular center drill

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	Stainless Steel[○]	Double-edged	NA	Available	TiAlN	-

  From: 347,816 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated High-Speed Steel Center Drill, R Model

  MISUMI

  R-shaped type that's ideal for precision machining

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 4	-	Centering (Positioning)	Stainless Steel[○]	Double-edged	NA	Available	TiAlN	-

  From: 323,248 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-XPM-ECR HSS Chamfer Series V Coat XPM 3 Blade Corner Rounding

  OSG

  Powder metal high-speed steel XPM corner rounding cutter with V coating

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	3 ～ 10	-	Round Chamfer	Stainless Steel[○]	Single blade	Available	Available	TiCN	0.5 ～ 4

  From: 2,486,667 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  V-UCS Hole Chamfering, Countersink, V Coating

  OSG

  High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	60 ～ 120	Hole Chamfer	Stainless Steel[◎]	Single blade	Available	Available	Other	-

  From: 681,830 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink, HSS, No Coating 90°

  ILIX

  Features●Less likely to generate secondary burrs and durable, that makes efficient work possible.●Can be used both in machine work and manual work.Usage●Work Material: Steel, Alloy Steel, Stainless Steel, Copper Alloy, Aluminum AlloySpecification●3 Blades●Tip Angle: 90°●No CoatingMaterials●High Speed Steel（HSS）

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 37	90	Hole Chamfer	Stainless Steel[○]	Single blade	Available	NA	Non-Coated	-

  From: 697,961 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  S-CRC S Coated Corner Rounding Cutter

  SANKO MFG

  Cutter dedicated to round chamfering with TiCN coating.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	9 ～ 46	-	Round Chamfer	Stainless Steel[○]	-	NA	Available	TiCN	0.5 ～ 15

  From: 1,712,247 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert for Spot Drill

  Nine9

  Insert for NC spot drill holder.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1–6 ～ 3 to 15	60 ～ 90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	Stainless Steel[○/◎]	Single blade	NA	Available	TiAlN / TiN / DLC	-

  From: 864,189 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS, SP Center, 90°

  IWATA TOOL

  [Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.3 ～ 9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade / Double-edged	NA	NA	-	-

  From: 190,953 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVM Chamfering Mill, Non-Coated

  OKAZAKI SEIKO

  In addition to chamfering of holes, horizontal feed cutting such as V-grooving, chamfer milling is also possible.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90 ～ 120	Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	Available	NA	Non-Coated	-

  From: 1,549,166 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spotting Drill 90° F723

  GUHRING

  Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	5 ～ 20	90	Centering (Positioning) / Hole Chamfer	Stainless Steel[○]	Single blade	-	Available	Other	-

  From: 1,912,493 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Helix Center Drills-JIS Type B 60°_CESB

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3.15 ～ 31.5	60°	Centering (Positioning) / Hole Chamfer	Stainless Steel[○]	Double-edged	NA	NA	-	-

  From: 327,390 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

  OSG

  [Features]・ Unique 3-flute specification suppresses chatter during machining and realizes high efficiency and high feed machining.・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.・ Returns and burrs are drastically reduced.・ Excellent cutting chip discharge.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	-	Stainless Steel[◎]	-	-	Available	Other	-

  From: 2,640,916 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  

  

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]·Ideal for chamfering. Can also be used as a deburring tool·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	Available	TS	-

  From: 1,222,151 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]·Easy high-quality processing of corner radius·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	Stainless Steel[○]	Single blade	NA	Available	TS	0.1 ～ 5

  From: 1,209,848 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long

  MISUMI

  Carbide center drill that's ideal for centering in mass production drilling

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.5 ～ 5	-	Centering (Positioning)	Stainless Steel[○]	Double-edged	NA	Available	TiAlN	-

  From: 1,150,419 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink, HSS, TiN Coating 90°

  ILIX

  Ideal for chamfering, countersinking, and deburring. Can be used for both machine work and manual work.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 37	90	Hole Chamfer	Stainless Steel[○]	Single blade	Available	Available	TiN	-

  From: 858,916 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSS SP Center 120°

  IWATA TOOL

  [Features]· Accuracy, machining speed, and cost performance are balanced.· Newly shaped HSS centering tool.· Long life with a blade tip that doesn't easily chip.· Double angle point prevents chipping of the tip.· No tip breakage, unlike conventional center drills.· The high torsion design provides excellent sharpness.· Improved Surface Roughness

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	0.9 ～ 25	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade / Double-edged	NA	NA	-	-

  From: 173,025 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Tip for Momimen / All C32GUX

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	-	-	Centering (Positioning) / Chamfering/Horizontal	Stainless Steel[○]	-	-	Available / NA	TiAlN / TiN / Non-Coated / AlCrN	-

  From: 496,520 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Center Drill, Okabe Standard, Type 1, Carbide 90°

  OKABE

  Because it uses carbide materials, it has both high hardness and elasticity. It is a center drill manufactured with one of the best heat treatment, and can be used for machining general steel, heat-treated steel, stainless steel, cast iron, etc.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 6	90	Centering (Positioning)	Stainless Steel[○]	Double-edged	NA	NA	Non-Coated	-

  From: 2,627,780 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Helix Center Drills-JIS Type A 60°_CESA

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3.15 ～ 25	60°	Centering (Positioning) / Hole Chamfer	Stainless Steel[○]	Double-edged	NA	NA	-	-

  From: 131,340 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Chamfering Cutter KMC-2

  KYOWA SEIKO

  [Applications]It can be used for chamfering and horizontal machining. [Features]By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, and aluminum.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 4	90°	Chamfering/Horizontal	Stainless Steel[◎]	Single blade	-	NA	-	-

  From: 905,500 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coated Type A 60° High Helix Single End Center Hole Drill_AUCDS

  YAMAWA MFG

  The single-edged shape makes it possible to achieve high-quality center holes, and the constant tool setting in the holder stabilizes the protrusion length.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1 ～ 6	60	Centering (Positioning)	Stainless Steel[○]	Single blade	Available	Available	-	-

  From: 268,500 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	Available	Available	TS	-

  From: 2,000,567 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack

  MISUMI

  Carbide spot drill that contributes to higher efficiency in chamfering

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90 ～ 120	Centering (Positioning) / Hole Chamfer	Stainless Steel[○]	Single blade	NA	Available	TiAlN	-

  From: 864,744 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	YG 1	TRUSCO NAKAYAMA	IWATA TOOL	YAMAWA MFG	FUJIGEN	MISUMI	FUJIGEN	YAMAWA MFG	7 LEADERS	MISUMI	OSG	IWATA TOOL	MISUMI	IWATA TOOL	OKABE	MISUMI	ILIX	TRUSCO NAKAYAMA	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	ILIX	SANKO MFG	Nine9	IWATA TOOL	OKAZAKI SEIKO	GUHRING	YAMAWA MFG	OSG	MISUMI	MISUMI	MISUMI	ILIX	IWATA TOOL	FUJIGEN	OKABE	YAMAWA MFG	KYOWA SEIKO	YAMAWA MFG	MISUMI	MISUMI
Product SeriesDòng sản phẩm	Leading Drill TIN-NC-LDS	H.S.S Center Drill	Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】	HSS, SP Center, 90° TiCN Coating	Point Drills 90°, Coated_PE-Q-V	Tips for Chibimomi C22GUX	TiN Coated High-Speed Steel Countersink / 3-Flute / 90°	Tip for Ecomen / Ecomen 2 TXMT16T306	High Helix Center Drills-Type A 60°_CE-S	Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X	TiAlN Coated High-Speed Steel Center Drill, 90° Chamfering Model	Leading Drill VP-LDS	HSS Center Drill, A Type, 60°, TiCN Coating	XAL Series Carbide Chamfer End Mill 2-Flute	Carbide SP Center, 90°, ALD Coating	Center Drill, Okabe Standard, Type 1, G Coating 60°	TS coated carbide chamfer, V grooving end mill, 2-flute	Straight Shank, Countersink, HSS, TiAlN Coating 90°	Counter Sink【1-6 Pieces Per Package】	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short	TiN Coated / Non-Coated High-Speed Steel NC Spot Drill	TiAlN Coated High-Speed Steel Center Drill, Regular Model	TiAlN Coated High-Speed Steel Center Drill, R Model	V-XPM-ECR HSS Chamfer Series V Coat XPM 3 Blade Corner Rounding	V-UCS Hole Chamfering, Countersink, V Coating	Straight Shank, Countersink, HSS, No Coating 90°	S-CRC S Coated Corner Rounding Cutter	Insert for Spot Drill	HSS, SP Center, 90°	SVM Chamfering Mill, Non-Coated	NC Spotting Drill 90° F723	High Helix Center Drills-JIS Type B 60°_CESB	WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P	TS coated carbide chamfering end mill, 2-flute / short model	TS coated carbide inner R-cutter, 2-flute	TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long	Straight Shank, Countersink, HSS, TiN Coating 90°	HSS SP Center 120°	Tip for Momimen / All C32GUX	Center Drill, Okabe Standard, Type 1, Carbide 90°	High Helix Center Drills-JIS Type A 60°_CESA	Carbide Chamfering Cutter KMC-2	Coated Type A 60° High Helix Single End Center Hole Drill_AUCDS	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack
CADCAD							2D / 3D				2D / 3D			2D / 3D			2D / 3D			2D / 3D	2D / 3D	2D / 3D	2D / 3D											2D / 3D	2D / 3D	2D / 3D								2D / 3D	2D / 3D
From	426,667 VND	133,536 VND Special Price On Sale Till 31/03/2025	694,616 VND	289,758 VND	759,558 VND	645,830 VND	620,147 VND	583,902 VND	113,023 VND	907,353 VND	323,248 VND	471,340 VND Special Price On Sale Till 31/03/2025	420,523 VND	935,000 VND	739,665 VND	38,704 VND	1,763,476 VND	1,106,744 VND	418,225 VND	1,373,122 VND	259,193 VND Special Price On Sale Till 31/03/2025	347,816 VND	323,248 VND	2,486,667 VND	681,830 VND	697,961 VND	1,712,247 VND	864,189 VND	190,953 VND	1,549,166 VND	1,912,493 VND	327,390 VND	2,640,916 VND	1,222,151 VND Special Price On Sale Till 31/03/2025	1,209,848 VND	1,150,419 VND	858,916 VND	173,025 VND	496,520 VND	2,627,780 VND	131,340 VND	905,500 VND	268,500 VND	2,000,567 VND Special Price On Sale Till 31/03/2025	864,744 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	Same day or more	6 Day(s) or more	Same day or more	9 Day(s) or more	Same day or more	9 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	9 Day(s)	Same day or more	Same day or more	Same day or more	4 Day(s) or more	Same day or more	17 Day(s)	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	Same day or more	6 Day(s) or more	9 Day(s)	Same day or more	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật																	TS General Steel 2 Flutes			TiCN 2 Flutes S (Short)														TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes									TS General Steel 2 Flutes
Tool Material Type	High-speed steel	Vanadium High Speed Steel	High-speed steel	High-speed steel	High-speed steel	-	High-speed steel	-	High-speed steel	Carbide	High-speed steel	Powder high-speed steel	High-speed steel	Carbide	Carbide	High-speed steel	Carbide	High-speed steel	Cobalt HSS	Powder high-speed steel	Cobalt HSS	High-speed steel	High-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	Cobalt HSS	Carbide	High-speed steel	Carbide	Carbide	High-speed steel	Carbide	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	-	Carbide	High-speed steel	Carbide	High-speed steel	Carbide	Carbide
Tool Diameter (D)(mm)	3 ～ 25	-	-	0.3 ～ 9	3 ～ 20	-	6.3 ～ 20.5	-	3 ～ 25	0.5 ～ 20	1 ～ 4	3 ～ 25	0.5 ～ 5	3 ～ 16	0.1 ～ 6	0.3 ～ 9.5	3 ～ 16	8.3 ～ 37	-	10 ～ 25	2 ～ 20	1 ～ 4	1 ～ 4	3 ～ 10	4.3 ～ 37	6.3 ～ 37	9 ～ 46	1–6 ～ 3 to 15	0.3 ～ 9	3 ～ 20	5 ～ 20	3.15 ～ 31.5	-	3 ～ 12	-	0.5 ～ 5	4.3 ～ 37	0.9 ～ 25	-	0.3 ～ 6	3.15 ～ 25	0.3 ～ 4	1 ～ 6	3 ～ 12	2 ～ 12
Tip angle (θ)	60 ～ 120	120˚	90	90	125°	-	-	-	60°	90	-	90	60	60 ～ 120	90	60	60 ～ 120	90	90	60 ～ 120	90 ～ 120	-	-	-	60 ～ 120	90	-	60 ～ 90	90	90 ～ 120	90	60°	-	60 ～ 120	-	-	90	120	-	90	60°	90°	60	90	90 ～ 120
Application	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Chamfering/Horizontal	Hole Chamfer	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Hole Chamfer	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Centering (Positioning)	Round Chamfer	Hole Chamfer	Hole Chamfer	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning)	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning)	Centering (Positioning) / Hole Chamfer	Chamfering/Horizontal	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer
work material	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○/◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]
Single blade, two blades	Single blade	-	Single blade	Single blade / Double-edged	Double-edged	-	Single blade	-	Double-edged	-	Double-edged	Single blade	Double-edged	Single blade	Single blade / Double-edged	Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Double-edged	Double-edged	Single blade	Single blade	Single blade	-	Single blade	Single blade / Double-edged	Single blade	Single blade	Double-edged	-	Single blade	Single blade	Double-edged	Single blade	Single blade / Double-edged	-	Double-edged	Double-edged	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	NA	-	NA	NA	NA	-	NA	-	NA	-	NA	NA	NA	NA	NA	NA	NA	Available	NA	Available	NA	NA	NA	Available	Available	Available	NA	NA	NA	Available	-	NA	-	Available	NA	NA	Available	NA	-	NA	NA	-	Available	Available	NA
Coating Y/N	Available	NA	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	NA	Available	Available	NA	NA	Available	NA	Available	Available	Available	Available	Available	NA	Available / NA	NA	NA	NA	Available	Available	Available
Coating Type	TiN	Non-Coated	TiN	TiCN	TiCN	TiAlN	TiN	AlCrN	-	Other	TiAlN	TiCN	TiCN	AlCrN	Other	TiN	TS	TiAlN	-	-	TiN	TiAlN	TiAlN	TiCN	Other	Non-Coated	TiCN	TiAlN / TiN / DLC	-	Non-Coated	Other	-	Other	TS	TS	TiAlN	TiN	-	TiAlN / TiN / Non-Coated / AlCrN	Non-Coated	-	-	-	TS	TiAlN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 ～ 4	-	-	0.5 ～ 15	-	-	-	-	-	-	-	0.1 ～ 5	-	-	-	-	-	-	-	-	-	-

Loading...Tải…