Chamfering / Centering Tools（work material：Cast Iron Page6）

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spotting Drill 120° F556

  GUHRING

  [Features]· Allows simultaneous centering and chamfering.· Use of FIRE coating achieves a longer life while enabling high speed cutting.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3 ～ 25	120	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	Available	Other	-

  From: 447,530 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spotting Drill 120° F724

  GUHRING

  Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	5 ～ 20	120	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	Available	Other	-

  From: 1,912,493 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spotting Drill 90° 557

  GUHRING

  [Features]· Allows simultaneous centering and chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	10 ～ 12.7	90	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	NA	-	-

  From: 819,648 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spotting Drill 90° J557

  GUHRING

  Allows simultaneous centering and chamfering. Cobalt HSS boasts excellent heat and abrasion resistance.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	3 ～ 20	90	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	NA	-	-

  From: 747,933 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NC Spotting Drill Long Shank 90° 559

  GUHRING

  Deep part centering and chamfering of the workpiece can be done at the same time.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	15.87	90	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	NA	-	-

  From: 2,269,512 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink 3-Flute 60° 472

  GUHRING

  Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.3 ～ 25	60	Hole Chamfer	Cast Iron[○]	Single blade	-	NA	-	-

  From: 541,044 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink 3-Flute 90° 1326

  GUHRING

  [Features]· Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.· Using A coating achieves a longer life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	4.3 ～ 31	90	Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: 842,755 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink 3-Flute, 90° (Set of 327) 499

  GUHRING

  [Features]· 6-piece set of 327.· Steel case provided.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.30/8.30/10.40/12.40/16.50/20.50	90	-	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: 7,689,480 VND
  Days to Ship: Số ngày giao hàng: 24 Day(s) or more

  24 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink 3-Flute, 90° (Set of 476) 498

  GUHRING

  [Features]· 6-piece set of 476.· Steel case provided.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	6.30/8.30/10.40/12.40/16.50/20.50	90	-	Cast Iron[○]	Single blade	-	NA	-	-

  From: 5,103,780 VND
  Days to Ship: Số ngày giao hàng: 25 Day(s) or more

  25 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Shank, Countersink, Multi Blade 90° 474

  GUHRING

  Adopts multiple blades to achieve a clean machined surface free of burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	8 ～ 20	90	Hole Chamfer	Cast Iron[○]	Single blade	-	NA	-	-

  From: 435,976 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Shank Countersink, 3-Flute 90° 328

  GUHRING

  Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter. Long product life with TiN coating.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	25 ～ 50	90	Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: 3,460,726 VND
  Days to Ship: Số ngày giao hàng: 24 Day(s) or more

  24 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Shank Countersink, 3-Flute 90° 477

  GUHRING

  Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	15 ～ 100	90	Hole Chamfer	Cast Iron[○]	Single blade	-	NA	-	-

  From: 1,563,883 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Deburring EW100G 4100

  GUHRING

  [Features]· A deburring fork for chamfering and deburring of hole entrances and exits.· Internal oil supply type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Hole Chamfer	Cast Iron[○]	Single blade	-	NA	-	-

  From: 18,871,730 VND
  Days to Ship: Số ngày giao hàng: 25 Day(s) or more

  25 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Deburring EW100G 4101

  GUHRING

  [Features]· A deburring fork for chamfering and deburring of hole entrances and exits.· Internal oil supply type

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Hole Chamfer	Cast Iron[○]	-	-	NA	-	-

  From: 21,945,086 VND
  Days to Ship: Số ngày giao hàng: 25 Day(s) or more

  25 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Deburring EW100VR 495

  GUHRING

  Capable of chamfering and deburring of hole entrances and exits by milling.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: 2,513,301 VND
  Days to Ship: Số ngày giao hàng: 25 Day(s) or more

  25 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Double Head Center Drill 60° 581

  GUHRING

  JIS1 equivalent double-headed center drill.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	1.25	118	Hole Chamfer	Cast Iron[○]	Single blade	-	NA	-	-

  From: 457,254 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  High Helix Center Drills-JIS Type B 60°_CESB

  YAMAWA MFG

  Suitable for center hole machining of viscous and soft work materials.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	3.15 ～ 31.5	60°	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Double-edged	NA	NA	-	-

  From: 327,390 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Mini Corner R Cutter CMCRC

  EIKOSHA

  [Features]· It is a round chamfering cutter with a small tip diameter.· A solid type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Cast Iron[○]	-	-	NA	-	1 ～ 8

  From: 1,952,093 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill TiAℓ N KCDA-60

  KYOWA SEIKO

  Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 3	120°	Centering (Positioning)	Cast Iron[◎]	Double-edged	-	Available	TiAlN	-

  From: 1,626,477 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill TiAℓ N KCDA-90

  KYOWA SEIKO

  Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 3	120°	Centering (Positioning)	Cast Iron[◎]	Double-edged	-	Available	TiAlN	-

  From: 1,626,477 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Noncoat KCD-60

  KYOWA SEIKO

  Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 3	120°	Centering (Positioning)	Cast Iron[◎]	Double-edged	-	NA	-	-

  From: 1,326,086 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center Drill Noncoat KCD-90

  KYOWA SEIKO

  Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 3	120°	Centering (Positioning)	Cast Iron[◎]	Double-edged	-	NA	-	-

  From: 1,326,086 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Inversed Chamfering Cutter KUMC-4

  KYOWA SEIKO

  4 straight flutes.45° (single angle type)Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/AluminumSingle-edge bladeTool grade, Carbide

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Chamfering/Horizontal	Cast Iron[◎]	Single blade	-	NA	-	-

  From: 2,327,389 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPEED/T, 2-flute, Multi 90°

  Poulten&Graf

  [Features]· Blade diameters φ10 or less are high rigidity types with thick shank diameter.· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Cast Iron[○]	Double-edged	Available	Available	Other	-

  From: 921,153 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Blade for Chamfer/Deburring【6-10 Pieces Per Package】

  NOGA JAPAN

  [Features]A blade for chamfering and deburring.Compatible main body: Compatible holder (EL04003), compatible handle (NG3000), compatible holder (UH1000, SC1400), compatible handle (NC5100), compatible handle (NC5200)

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	-	-	Other	Cast Iron[○]	-	-	-	-	-

  From: 818,661 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

  OSG

  [Features]・ Unique 3-flute specification suppresses chattering during machining and realizes high efficiency and high feed machining・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.・ The return and burr are drastically reduced・ Excellent cutting chip discharge

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	90°	Chamfering/Horizontal	Cast Iron[○]	Single blade	NA	Available	-	-

  From: 2,640,916 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

  OSG

  [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	-	Cast Iron[○]	-	-	Available	Other	-

  From: 2,779,563 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	NA	-	-

  From: 2,168,698 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	Cast Iron[○]	Single blade	-	NA	-	-

  From: 2,601,146 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	NA	-	-

  From: 2,601,146 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide V Cut End Mill Long Type Coated Series AMVL 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	60	Hole Chamfer / Chamfering/Horizontal	Cast Iron[○]	Single blade	-	NA	-	-

  From: 2,370,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	NA	-	-

  From: 2,370,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	NA	-	-

  From: 2,370,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	60	Hole Chamfer / Chamfering/Horizontal	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Cast Iron[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Standard Type, TiN Coat, 90°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: 2,607,406 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Standard Type, TiN Coat, 120°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	120	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: 2,607,406 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Long Type, TiN Coat, 90°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: 3,362,911 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Long Type, TiN Coat, 120°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	120	Centering (Positioning) / Hole Chamfer	Cast Iron[○]	Single blade	-	Available	TiN	-

  From: 3,362,911 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	YAMAWA MFG	EIKOSHA	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	Poulten&Graf	NOGA JAPAN	OSG	OSG	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY
Product SeriesDòng sản phẩm	NC Spotting Drill 120° F556	NC Spotting Drill 120° F724	NC Spotting Drill 90° 557	NC Spotting Drill 90° J557	NC Spotting Drill Long Shank 90° 559	Straight Shank, Countersink 3-Flute 60° 472	Straight Shank, Countersink 3-Flute 90° 1326	Straight Shank, Countersink 3-Flute, 90° (Set of 327) 499	Straight Shank, Countersink 3-Flute, 90° (Set of 476) 498	Straight Shank, Countersink, Multi Blade 90° 474	Tapered Shank Countersink, 3-Flute 90° 328	Tapered Shank Countersink, 3-Flute 90° 477	Deburring EW100G 4100	Deburring EW100G 4101	Deburring EW100VR 495	Double Head Center Drill 60° 581	High Helix Center Drills-JIS Type B 60°_CESB	Carbide Mini Corner R Cutter CMCRC	Carbide Center Drill TiAℓ N KCDA-60	Carbide Center Drill TiAℓ N KCDA-90	Carbide Center Drill Noncoat KCD-60	Carbide Center Drill Noncoat KCD-90	Carbide Inversed Chamfering Cutter KUMC-4	SPEED/T, 2-flute, Multi 90°	Blade for Chamfer/Deburring【6-10 Pieces Per Package】	WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N	WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°	Carbide V Cut End Mill Long Type Coated Series AMVL 120°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°	V Spot Carbide Drill, Standard Type, TiN Coat, 90°	V Spot Carbide Drill, Standard Type, TiN Coat, 120°	V Spot Carbide Drill, Long Type, TiN Coat, 90°	V Spot Carbide Drill, Long Type, TiN Coat, 120°
CADCAD
From	447,530 VND	1,912,493 VND	819,648 VND	747,933 VND	2,269,512 VND	541,044 VND	842,755 VND	7,689,480 VND	5,103,780 VND	435,976 VND	3,460,726 VND	1,563,883 VND	18,871,730 VND	21,945,086 VND	2,513,301 VND	457,254 VND	327,390 VND	1,952,093 VND	1,626,477 VND	1,626,477 VND	1,326,086 VND	1,326,086 VND	2,327,389 VND	921,153 VND	818,661 VND	2,640,916 VND	2,779,563 VND	2,168,698 VND	2,906,958 VND	2,906,958 VND	2,601,146 VND	2,601,146 VND	3,109,123 VND	3,109,123 VND	3,109,123 VND	2,370,248 VND	2,370,248 VND	2,370,248 VND	2,752,725 VND	2,752,725 VND	2,752,725 VND	2,607,406 VND	2,607,406 VND	3,362,911 VND	3,362,911 VND
Days to ShipSố ngày giao hàng	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s)	6 Day(s) or more	24 Day(s) or more	25 Day(s) or more	6 Day(s) or more	24 Day(s) or more	9 Day(s) or more	25 Day(s) or more	25 Day(s) or more	25 Day(s) or more	9 Day(s)	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more
Tool Material Type	High-speed steel	Carbide	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Tool Diameter (D)(mm)	3 ～ 25	5 ～ 20	10 ～ 12.7	3 ～ 20	15.87	6.3 ～ 25	4.3 ～ 31	6.30/8.30/10.40/12.40/16.50/20.50	6.30/8.30/10.40/12.40/16.50/20.50	8 ～ 20	25 ～ 50	15 ～ 100	-	-	3 ～ 12	1.25	3.15 ～ 31.5	-	0.3 ～ 3	0.3 ～ 3	0.3 ～ 3	0.3 ～ 3	-	3 ～ 20	-	-	-	1 ～ 20	1 ～ 20	1 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25
Tip angle (θ)	120	120	90	90	90	60	90	90	90	90	90	90	-	-	90	118	60°	-	120°	120°	120°	120°	-	90	-	90°	-	90	60	120	60	120	60	90	120	60	90	120	60	90	120	90	120	90	120
Application	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Hole Chamfer	Hole Chamfer	-	-	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Centering (Positioning) / Hole Chamfer	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Other	Chamfering/Horizontal	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer
work material	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	Double-edged	-	Double-edged	Double-edged	Double-edged	Double-edged	Single blade	Double-edged	-	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	NA	-	-	-	-	-	-	Available	-	NA	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Coating Y/N	Available	Available	NA	NA	NA	NA	Available	Available	NA	NA	Available	NA	NA	NA	Available	NA	NA	NA	Available	Available	NA	NA	NA	Available	-	Available	Available	NA	Available	Available	NA	NA	Available	Available	Available	NA	NA	NA	Available	Available	Available	Available	Available	Available	Available
Coating Type	Other	Other	-	-	-	-	TiAlN	TiN	-	-	TiN	-	-	-	TiAlN	-	-	-	TiAlN	TiAlN	-	-	-	Other	-	-	Other	-	TiAlN	TiAlN	-	-	TiAlN	TiAlN	TiAlN	-	-	-	TiAlN	TiAlN	TiAlN	TiN	TiN	TiN	TiN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1 ～ 8	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…