(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
54 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
KABUTO MFG
[Features]· Waterproof structure keeps out cutting fluid by means of an oil seal. · Waterproof function maintained even under slower rotation. · Exchangeable tip provides reductions in cost.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | N/A | - | - |
From: 10,577,116 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TAKURA KOGU
[Features]・ Overall hardening and polishing, HRC 60 to 63・ The head drive mechanism created from many years of experience prevents the ingress of fine cutting powder and cutting oil. (Bearing has long lifespan)・ Maximum rotational speeds of MT-2, MT-3, MT-4 are 3,000 min-1, and MT-5 is 2,000 min-1, and MT-6 is 1,000 min-1.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT3 ~ MT6 | N/A | - | - |
From: 3,459,510 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUTAMURA MACHINES & TOOLS
[Features]· Angular bearing, thrust bearing and needle roller bearing are used for smooth rotation torque.· Suitable for screw cutting and edge surface processing, as A, C and E-type are fine type.· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT3 ~ MT5 | Yes / N/A | - | - |
From: 16,910,861 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NSK lathe jig rotation center LC-A type
NSK
[Features]· Since the run-out of center spindle tapered part is 5 µm or less, tapered roller bearings, thrust ball bearings, and needle bearings have been used.[Applications]· Workpiece support and runout prevention.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT3 ~ MT5 | N/A | - | - |
From: 9,120,509 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Rolling Center RST With Carbide
FUTAMURA MACHINES & TOOLS
[Features]· External appearance, shape and structure are the same with RST type, but carbide alloy chip is low-attached to the tip part of the center.· As the carbide alloy insert is attached on the tip, it has superior anti-abrasion and anti-corrosion performance.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT6 | Yes | - | - |
From: 9,195,656 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Lathe Center TC Series
TAKURA KOGU
[Features]・ With a carbide insert, used on a lathe to eliminate runout of machined products.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT5 | Yes | - | - |
From: 1,156,501 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KABUTO MFG
[Features]· Regular model for general lathes. · Exchangeable tip provides reductions in cost.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | N/A | - | - |
From: 5,543,825 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Work Driving Center, HD-Type Replacing Claw
FUTAMURA MACHINES & TOOLS
When the claw of the work driving center is worn and damaged, promptly replace the claw before using.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | - | N/A | - | - |
From: 3,420,953 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TAKURA KOGU
[Features]・ With a carbide insert, used on a lathe to eliminate runout of machined products.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | Yes | - | - |
From: 2,741,090 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Lathe Center With Super Carbide
FUTAMURA MACHINES & TOOLS
Used for various machines and cylindrical grinders.(Please check the part number list for details.)
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT6 | Yes | - | - |
From: 3,704,189 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUTAMURA MACHINES & TOOLS
[Features]· Since the processing heat generated by the elongation of the workpiece is absorbed by the flat spring built into the center, there is no distortion of a workpiece and its finishing accuracy improves.· The thrust load generated by the elongation of the workpiece is also absorbed to the slide mechanism, and it is designed not to apply load to the bearing directly.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT3 ~ MT5 | N/A | - | - |
From: 15,988,351 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUTAMURA MACHINES & TOOLS
[Features]· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.· 2 needle bearings and 3 thrust bearings are used inside this product, and the main body diameter is designed to be small.· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | Yes / N/A | - | - |
From: 7,184,789 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Rolling Center 100 With Stickers
FUTAMURA MACHINES & TOOLS
[Features]· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.· 3 bearing including 2 needle bearings and 1 thrust bearing are used inside this product, and the main body diameter is designed to be small.· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.· V seal is adopted and suitab...Readmore
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | Yes / N/A | - | - |
From: 10,391,051 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Work Driving Center DK Claw Fixed
FUTAMURA MACHINES & TOOLS
[Features]· Ideal for gear cutting, spline processing, keyway processing, and woodworking.· There will be no need of chuck if this device is used.· As the processing items are maintained in both centers, the finishing of the processed items are the best.· Single-action detaching / attaching of processed items is possible.· By using the extraction nut, it is easy to remove from the machine.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT3 ~ MT4 | N/A | - | - |
From: 17,574,928 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUTAMURA MACHINES & TOOLS
[Features]· To ensure simple use in NC machines, etc., the outer diameter (grip part) is straight.· If using a workpiece driving center, there is no need to disconnect the chuck: grip the adapter outer diameter with the chuck soft jaw. (Fully baked abrasive)
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT4 ~ MT5 | - | - | - |
From: 7,170,911 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
S Type Live Center (for High Speed)
TAKURA KOGU
[Features]・ This rolling center is a live center with a needle bearing and a ball bearing properly arranged to make the external shape compact, yet with a large load capacity, high rigidity and a wide working range.・ It is designed to withstand all types of harsh operations from low to high speeds, and its components engineered with years of tool holder technology have high compatibility and abrasion resistance.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT6 | N/A | - | - |
From: 4,941,005 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· It is all pure steel.[Applications]· Prevents runout of workpiece.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT6 | N/A | - | - |
From: 751,665 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, High-Speed Waterproof Type LF TP
SANYOSEISAKUSYO
With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation.[Features]· Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).· With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.· 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT5 | N/A | - | - |
From: 8,631,268 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, Standard Type, includes Oil Sheet LSP
SANYOSEISAKUSYO
Equipped with both high rigidity and waterproofing[Features]· By making the rotation center itself a bearing, a slim design with high rigidity and durability has been achieved.· Highly waterproof and dustproof in low to medium speed regions.· Also ideal for grinding and hobbing machines.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT6 | N/A | - | - |
From: 7,217,641 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KABUTO MFG
[Features]· Waterproof structure keeps out cutting fluid by means of an oil seal. · Waterproof function maintained even under slower rotation. · Exchangeable tip provides reductions in cost.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT3 ~ MT5 | N/A | - | - |
From: 12,826,953 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Kabuto Seal Center With Cold Punched Nut KSN-B
KABUTO MFG
[Features]· Waterproof structure keeps out cutting fluid by means of an oil seal. · Waterproof function maintained even under slower rotation. · Exchangeable tip provides reductions in cost.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT3 ~ MT5 | N/A | - | - |
From: 15,451,696 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUTAMURA MACHINES & TOOLS
[Features]· The product is designed by focusing on the super high speed rotation (7000 min-1) and high accuracy (TIR 0.003).· Carbide insert is attached on the tip part to withstand abrasion and friction due to super high speed rotation. (A type)· By using the combined angular bearing (3 places) and two types of bearings of needle bearings inside this product, it is finely designed and assembled to withstand rigidity.· The use of a unique labyrin...Readmore
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT3 ~ MT5 | Yes / N/A | - | - |
From: 26,682,256 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUTAMURA MACHINES & TOOLS
[Features]· Forcing nut is equipped on the rear part of the main body to be able to remove from the front part of the tailstock.· Inside this product, combined angular bearing (3 pcs) and needle bearing are used, which makes smooth rotation torque.· A and C type are fine type, suitable for screw cutting and edge surface processing.· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutti...Readmore
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT3 ~ MT5 | Yes / N/A | - | - |
From: 18,772,949 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUTAMURA MACHINES & TOOLS
Large bearings have been adopted and the main unit O.D. and center shaft diameter have been made thicker in order to withstand larger loads than a standard type
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT5 ~ MT6 | N/A | - | - |
From: 28,050,696 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUTAMURA MACHINES & TOOLS
[Features]· Inside this product, there are two ball bearings on M.T No. 1 and No. 2, and 1 thrust bearing. 3 types of each of taper roller bearing, thrust bearing and ball bearing are used for M.T No. 3 to No. 7.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT6 | N/A | - | - |
From: 6,799,415 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUTAMURA MACHINES & TOOLS
[Features]· Center runout (maximum) against M.T. is TIR 0.01.· Hydraulic mechanism is adopted to the claw operation and the edge surface is maintained evenly by independent operation of the claw.· The claw and the center shaft are made of high-speed steel to achieve high durability.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | 5 ~ 8 | MT4 ~ MT5 | N/A | - | - |
From: 35,250,813 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Umbrella Type Rotation Center BRC
FUTAMURA MACHINES & TOOLS
[Features]· Used for lathes and cylindrical grinding machines.· Used for center pushing tool of pipe type, ring type and thin processed items.· Inside this product, 3 types, each one of taper roller bearing, thrust bearing and ball bearing, are prepared.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT6 | N/A | - | - |
From: 11,997,451 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Bull Nose Rolling Center LCU Series
TAKURA KOGU
[Features]・ The shank base has a large diameter and can be removed with the extractor nut equipped on the tailstock.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT6 | N/A | - | - |
From: 4,216,311 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TAKURA KOGU
[Features]・ With a carbide insert, used on a lathe to eliminate runout of machined products.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT3 ~ MT5 | Yes | - | - |
From: 3,794,720 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]·It has a carbide tip.·Prevents workpiece vibration.·Materials: Carbon steel for machine structure (S45C)
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT6 | Yes | - | - |
From: 1,507,560 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Lathe Center (Long Type, with Extra-Hard Tip)
TRUSCO NAKAYAMA
[Features]· By making the lathe center longer, the distance between the workpiece and tailstock became wider, improving the work efficiency.[Applications]· Prevents runout of workpiece.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | Yes | - | - |
From: 5,282,000 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
"Half Center" (with Carbide Tip)
TRUSCO NAKAYAMA
[Features]· The tip of the lathe center has been cut so as not to touch the workpiece.[Applications]· Prevents center deflection.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT5 | Yes | - | - |
From: 6,336,500 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Umbrella-shaped rotating center (with bearings/TLK)
TRUSCO NAKAYAMA
[Features]· With bearing.[Applications]· As a tool for centering holes at the pipe center.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT7 | N/A | - | - |
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, High-Speed Waterproof Type LF SP
SANYOSEISAKUSYO
With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation. Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).[Features]· With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.· 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT5 | N/A | - | - |
From: 7,346,492 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut
SANYOSEISAKUSYO
[Features]· Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | N/A | - | - |
From: 8,443,991 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, High-Speed Waterproof Type, LF, TP, with Cold Punched Nut
SANYOSEISAKUSYO
[Features]· Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | N/A | - | - |
From: 9,621,947 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, Light Torque, Waterproof Type FP SP
SANYOSEISAKUSYO
Oil seal exhibits waterproofing effects while not rotating.[Features]· Inherits the compact design that is characteristic of NAKANE (same size as standard type).· Rotation follows quick-starting machines.· 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT5 | N/A | - | - |
From: 7,845,963 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, Light Torque, Waterproof Type FP TP
SANYOSEISAKUSYO
Oil seal exhibits waterproofing effects while not rotating.[Features]· Inherits the compact design that is characteristic of NAKANE (same size as standard type).· Rotation follows quick-starting machines.· 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT5 | N/A | - | - |
From: 9,180,902 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, High-Speed Waterproof Type, FP, SP, with Cold Punched Nut
SANYOSEISAKUSYO
Easy to detach and attach in front with the forcing nut.[Features]· The nut fits into the same size LF type and FP type.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | N/A | - | - |
From: 8,758,152 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, High-Speed Waterproof Type, FP, TP, with Cold Punched Nut
SANYOSEISAKUSYO
Easy to detach and attach in front with the forcing nut.[Features]· The nut fits into the same size LF type and FP type.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | N/A | - | - |
From: 10,171,779 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, with Carbide, Light Torque, Waterproof Type FPA
SANYOSEISAKUSYO
[Features]· With carbide tip resistant to wear, for machinery with aggressively fast spindle startup and workpieces frequently mounted and removed.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT2 ~ MT5 | Yes | - | - |
From: 15,001,638 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, Standard Type LS
SANYOSEISAKUSYO
Secures high rigidity and durability while maintaining slim shape.[Features]· By making the rotation center itself a bearing, a slim design with high rigidity and durability has been achieved.· General purpose waterproofing is realized during rotation because there is no opening in the forward direction.· Optimal for threading of thin objects, etc.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT5 | N/A | - | - |
From: 5,921,849 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, with Carbide, Standard Type LSA
SANYOSEISAKUSYO
[Features]· With carbide tip resistant to wear, for machinery with aggressively fast spindle startup and workpieces frequently mounted and removed.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT5 | Yes | - | - |
From: 12,078,582 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, with Carbide, Standard Type, with Oil Tool LSPA
SANYOSEISAKUSYO
[Features]· With carbide tip resistant to wear, for machinery with aggressively fast spindle startup and workpieces frequently mounted and removed.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | MT1 ~ MT5 | Yes | - | - |
From: 14,128,793 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NAKANE Rotating Center, Load Type M
SANYOSEISAKUSYO
Supports MT6 or later large machinery.[Features]· Uses 2 large angular bearings to maintain high accuracy.· Metric 80 (1/20 taper) standard lineup also.
Type | Mounting type | Compatible Chuck Nominal Size | Jaw Height(mm) | Compatible Manufacturer | Chuck Outer Diameter(mm) | Number of Jaws | Shank MT No | Tip Carbide Insert (Y/N) | Tip Width Across Flat(mm) | Auxiliary Jig Type |
---|---|---|---|---|---|---|---|---|---|---|
Rotation Center / Lathe Center | - | - | - | - | - | - | Metric80 | N/A | - | - |
From: 132,512,672 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy