Screwdrivers（Tip standards：Combination）

• You can add up to 6 items per a category to the compare list. Compare

  

  20170718_Q80【6 Pieces Per Package】

  VESSEL

  [Features]・The grip with crystal shine has an environmentally friendly, vegetable-based crystalline pattern that is resistant to oils and chemicals.・Ideal for work in narrow places.・Overtightening with excessive torque, or optimum screw tightening without excessive torque can be performed.・Color coding with cross-head and straight-slot.・Uses cellulose acetate resin.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	-	-	Set Product	-	-	-	-	-	-	-0.9,-1.25,-1.8,-2.3,-3.0,-3.5	-

  From: 362,334 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver, Tool Check Plus【39 Pieces Per Package】

  WERA

  A screwdriver set that allows you to tighten the screws straight.[Features]・ A compact bit screwdriver is newly attached, enabling driver work in addition to ratchet work.・ The ergonomically designed handle helps generate greater torque.・ Bits can be inserted without pushing the sleeve of the holder forward, and it can rotate freely.・ Bits can be exchanged with one hand.・ Its design is delicate and it can be used in narrow spaces or precis...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	5.5	-	Set Product	-	NA	-	-	Rubber	-	3–8	-

  From: 4,937,696 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Super Action Grip Screwdriver

  ANEX

  [Features]·Suitable for removing screws that require force.·A single screwdriver can be used in two different ways: straight and T-shaped.·You can easily switch from a T shape to a straight shape (or vice versa) with a single touch.·T shape: For initial loosening and retightening that requires force.·Straight type: For normal screwdrivers (fast turning).·Bit replacement formula.·With magnet (bit).・ With storage case.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	6	-	Set Product	Square	NA	-	-	Resin	-	4 ～ 6	-

  From: 1,307,988 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Torx Plate Ratchet Screwdriver No.TX-11【10 Pieces Per Package】

  VESSEL

  Plate ratchet screwdriver with Torx bits.[Features]・ Ratchet handle, Torx bit set・ Compatible with tamper-proof (Torx screw with tamper-proof)・ Turn fast with a speed ring. 6.35 mm square drive when the ring is removed・ Low profile ratchet handle that is convenient in narrow spaces・ Ball lock type, bit insertion part width across flats 6.35 mm[Applications]・ For various maintenance and other assembly and disassembly work

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.2	6	-	Set Product	-	NA	-	-	Stainless Steel	-	-	-

  From: 266,900 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Precision Screwdriver Set (With Clear Case)【6 Pieces Per Package】

  VESSEL

  Precision screwdriver set.[Features]· Blade tips of Phillips, flathead, hex, and socket.· Main body stainless steel (end cap part is made of resin).· Includes a cushioning grip that supports fastening.· Convenient clear carrying case included.[Applications]· For assembly, disassembly and repair of precision instruments, cameras, watches, eyeglasses, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.00	-	18 ～ 24	Set Product	Round	NA	NA	NA	Resin	-	0.89 ～ 2.5	-

  From: 316,800 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ratchet Driver Set RDS20

  TONE

  A set of 2 types of handles, 3 sized replacement bit holders and 20 frequently used bits.[Features]· Left and right switching can be done by simply turning the change knob.· The grip shape can be changed between 2 types according to the work.· The bit holder has a one-touch bit release mechanism.· Grip component of the screwdriver comes with a magazine that can store 6 bits.[Applications]· For maintenance of automobile...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	5.5 ～ 8	-	Set Product	Square	Available	-	-	Resin	-	-	-

  From: 2,560,305 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  NO. TD-73MC Plate Ratchet Screw Catch

  VESSEL

  Low profile plate ratchet, with screw holding that does not drop screws.[Features]・ Low profile ratchet handle that is convenient in narrow spaces・ Magnetic screw holding that holds screws securely・ Turn fast with a speed ring. 6.35 mm square drive when the ring is removed[Applications]・ Bits for hex screws used in furniture assembly and bicycles are also included

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	4 ～ 6	-	Set Product	-	NA	-	-	Resin	-	2.5 ～ 6	-

  From: 358,692 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Set Craft Form XXL TX

  WERA

  [Features]· Wera's best-selling screwdriver set.· The lasered tip provides exceptional bite into screws.· Special grip design provides an easy grip and comfortable fit.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.2	2.5 ～ 7	-	Set Product	-	-	-	-	-	-	-	-

  From: 3,103,233 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ratchet Driver Set 8510R-100SET 【21 Pieces Per Package】

  PB SWISS TOOLS

  A set of ratchet screwdrivers.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	4 ～ 8	-	Set Product	Square	NA	-	-	Resin	0.6 ～ 1.2	2.5 ～ 6	-

  From: 4,332,551 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  NO. TD-79 Plate Ratchet Screwdriver

  VESSEL

  Ultra-thin plate ratchet screwdriver.[Features]・ 18 mm low profile head ratchet・ Bit with magnet that makes it easy to work in tight spaces・ The main body can store 2 bits and has a hanging hole・ High-accuracy ratchet gear, secured tightening possible[Applications]・ Used in all industries including machines, equipment, piping, construction, etc.・ Used as a tool for electronic parts and vehicle maintenance

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	4 ～ 6	-	Set Product	-	NA	-	-	Stainless Steel	-	2.5 ～ 6	-

  From: 265,200 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Plate Ratchet Screw Catch (Torx) No.TX-12MC

  VESSEL

  Plate ratchet screwdriver.[Features]・ Ratchet handle, Torx bit, screw holding set・ Magnetic screw holding that holds screws securely・ A set of bits for Torx screws that are frequently used for maintenance. Can also be used with tamper-proof Torx screws・ Turn fast with a speed ring. 6.35 mm square drive when the ring is removed・ Bit insertion part width across flats of the hexagon 6.35 mm[Applications]・ For various maintenance and ot...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.2	6	-	Set Product	-	NA	-	-	Stainless Steel	-	-	-

  From: 367,950 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Set with Voltage Detector

  TRUSCO NAKAYAMA

  [Features]· When the tip of the screwdriver is brought into contact with an outlet, etc., and you press the rear end of the grip, the neon tube inside the grip activates and you can see the current flow.· Suitable for checking the presence or absence of electric current in the electric wire.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2	3 ～ 5	-	Set Product	Round	NA	NA	NA	Resin	-	-	-

  From: 331,196 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Ratchet driver DBR

  KTC(KYOTO TOOL)

  [Features]· The ratchet mechanism enables fast turning in both directions for loosening and tightening.· Fixing the ratchet allows it to be used as a normal screwdriver.[Applications]· General purpose tool

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	5.5 ～ 8	-	Set Product	Square	NA	-	-	Rubber	-	1.5 ～ 8	-

  From: 1,092,173 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Screwdriver Set - 12 pcs

  WERA

  12-piece set of micro screwdrivers.[Features]・ Uses an ergonomic handle that is ergonomically easy to hold, easy to rotate, and reliably transmits torque.・ It allows you to tighten screws straight.・ With a zone that can rotate quickly.・ With the aim (hexagonal) for precise adjustment.・ Designed to transmit stronger torque with your fingers.・ With a sturdy pouch.・ Manufacturing country: Czech.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.00 / No.0	1.5 ～ 3	-	Set Product	Round	NA	NA	NA	Rubber	-	0.9 ～ 2	-

  From: 3,026,308 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Craft Form, Compact 60RA Set 【17 Pieces Per Package】

  WERA

  A replaceable insulated screwdriver that is compactly packed in a case that is convenient to carry.[Features]・ It allows you to tighten screws straight.・ The handle designed according to ergonomics can deliver torque larger than usual.・ The rotation angle is 8 degrees.・ There is a switch in the tightening direction.・ Bits can be inserted without pushing the sleeve of the holder forward.・ Bits can be exchanged with one hand.・ With a sturdy pouch.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	5.5 ～ 8	-	Set Product	Round	NA	-	-	Rubber	-	3 ～ 5	-

  From: 4,254,263 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Stubby Interchangeable Ratchet Hex Screwdriver Set

  PB SWISS TOOLS

  A hexagonal set of interchangeable StarBee drivers that are convenient for handling.[Features]·Various sizes can be handled by simply replacing the bit.·The bit can be stored inside the handle.[Applications]·Ideal for screw tightening and adjustment in many work scenes.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	-	-	Set Product	Round	-	-	-	-	-	-	-

  From: 1,324,645 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Core Screwdriver Set D-16

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.· D-16 set includes: D-16-1B/D-16-2B/D-16-3B/D-16-4B/D-16-5.· Color D-16-1B to 4B Blue / D-16-5 White.· Weight 45 g.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	1.35 ～ 3.6	-	Set Product	-	-	-	-	Resin	0.4 ～ 1.2	1.95 ～ 3.35	-

  From: 192,748 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Screwdriver Set DK-05 – 08

  ENGINEER

  Interchangeable screwdriver set.[Features]・ DK-05 and 06 have low-voltage test grip (AC80 to 300 V／DC100 to 250 V)・ If the tip of the screwdriver touches the target and the head of the handle is pressed with your finger, the neon tube built in will light up[Applications]・ It is convenient for repair and maintenance work

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2	3.5 ～ 5.5	-	Set Product	Round	NA	-	-	Resin	-	5.5	-

  From: 506,262 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Reverse Gear Ratchet

  SUEKAGE TOOL

  Has a compact head that is the best in its class. The number of gear teeth is 52, and it turns with a satisfying feeling, improving work efficiency. The total height of the head with the included short bit attached is 16.5 mm.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	4 ～ 7	-	Set Product	-	NA	-	-	-	-	3 ～ 6	-

  From: 1,027,240 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ratchet Driver Set 8510R-30SET【21 Pieces Per Package】

  PB SWISS TOOLS

  A set of ratchet screwdrivers.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	4 ～ 8	-	Set Product	Square	NA	-	-	Resin	0.6 ～ 1.2	2.5 ～ 6	-

  From: 4,235,962 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  NO. TD-72 Plate Ratchet Socket Screwdriver Set【5 Pieces Per Package】

  VESSEL

  Low profile plate ratchet screwdriver. (with socket)[Features]・ Low profile convenient for assembly and disassembly・ Fasten with a speed ring. 6.35 mm square drive when the ring is removed・ The set of 4 sizes of sockets and +2 bit・ Bit insertion part width across flats of the hexagon 6.35 mm

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.2	-	-	Set Product	-	NA	-	-	Stainless Steel	-	5.5 ～ 10	-

  From: 314,975 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Twin Wrench Screwdriver Set DR-07 【10 Pieces Per Package】

  ENGINEER

  Twin wrench screwdriver set that demonstrates its power when working near walls or in narrow spaces.[Features]・ A twin wrench screwdriver and frequently used +/- and hex bits are set・ The replacement bit holder is a burette type that is convenient to carry・ Non-slip cushion handle

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.00 / No.1 / No.2	4.5 ～ 6	-	Set Product	-	Available	-	-	Rubber	-	1.5 ～ 4	-

  From: 634,103 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Compact ratchet 52 (straight type) set

  ANEX

  [Features]·It is ultra-thin with a head width of 20 mm.·For screwdrivers in narrow spaces.·Smooth work with 52 fine gears.·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.·Uses ultra-short bits.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	6	-	Set Product	-	NA	-	-	Resin	-	2.5 ～ 6	-

  From: 1,476,773 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Craft Form Screwdriver Set

  WERA

  A set of 7 screwdrivers with handles that realize ergonomics.[Features]・ It allows you to tighten screws straight.・ A handle designed to make it easier to apply torque in line with ergonomics.・ The tip of the handle has a hexagonal shape to prevent it from rolling around.・ The laser tip at the tip makes it easy to bite into the screw.・ The special grip shape realizes ease of grip and fit.・ White carton specifications.・ Manufacturing country: Czech.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	6 ～ 8	-	Set Product	Round	NA	NA	NA	Rubber	-	8 ～ 10	-

  From: 3,661,200 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Interchangeable ESD Micro Screwdriver (Anti-static Type)

  WERA

  The product conforms to European Standards EN100-015-1 as the optimal precision screwdriver for assembly of precision electric equipment. Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.00 / No.0 / No.1	1.5 ～ 3	-	Set Product	-	NA	-	-	Rubber	-	1.5 ～ 2	-

  From: 4,392,693 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Craft Form, Compact VDE60 Set

  WERA

  Replacement insulated drivers are collected in a compact, convenient, hand-held case.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.0 / No.1 / No.2	2.5 ～ 6.5	-	Set Product	-	NA	-	-	Rubber	-	3 ～ 6	-

  From: 4,440,105 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Core Screwdriver D-16-2B

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.· Tip size: 1.9 x 0.9, 1.95 / 2.0 / 2.6 / 2.65.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	1.9	-	Single Item	-	-	-	-	Resin	0.9	1.95 ～ 2.65	-

  From: 33,660 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Core Screwdriver D-16-1B

  HOZAN

  · Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.[Applications]· Tip sizes: 1.35 x 0.7, 1.4 x 0.8, 1.4, 1.5, 2.6, 2.7.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	1.35 ～ 1.4	-	Single Item	-	-	-	-	Resin	0.7 ～ 0.8	2.6 ～ 2.7	-

  From: 33,660 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Core Screwdriver D-16-3B

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.· Tip size: 2.65 X 1, 3.1 X 1.2, 2.65, 3.1, 3.18 and 3.35.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	2.65 ～ 3.1	-	Single Item	-	-	-	-	Resin	1 ～ 1.2	2.65 ～ 3.35	-

  From: 48,048 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  BAHCO, Ratchet Screwdriver, Pistol Type

  BAHCO

  Based on ergonomics, it is easier to grip and leads to prevention of injuries. The grip changes from straight to pistol shaped.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2	4.5 ～ 5.5	-	Set Product	-	NA	-	-	Resin	-	-	-

  From: 1,895,478 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Bit Set DR-10 – 17

  ENGINEER

  Complete lineup of bit set ideal for service engineers.[Features]・ It has a complete set of frequently used bits from short bits, long stepped bits to hex bits and socket adapters suitable for various purposes・ With burette type holder for storing and carrying bits・ DR-16 ideal for rechargeable and electric screwdrivers[Applications]・ For machine assembly, dismantling work, equipment maintenance, factory work, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.00 / No.1 / No.2	4.5 ～ 6	-	Set Product	-	Available	-	-	-	-	1.5 ～ 6	-

  From: 366,476 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Torque Vario(R) Set

  WIHA

  Tightening torque has a ±6% margin of error[Features]· 1.0-5.0 Nm Torque Vario and Universal Bit Holder with Phillips, Torx, 10 hex bits and a Torque Setter for a 13-piece set.· German style tough metallic case included

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.0 / No.1 / No.2	-	-	Set Product	-	NA	NA	NA	Rubber	-	2 ～ 3	-

  From: 11,736,378 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Offset Ratchet Driver (Straight Type)

  ANEX

  [Features]·For screwdrivers in narrow spaces.·Ultra-thin head 21 mm by adopting ultra-short bit.·19 mm total length ultra-short bit.·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.·Straight type.[Applications]·For work such as removing screws in narrow spaces.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	6	-	Set Product	Square	NA	-	-	Stainless Steel	-	2.5 ～ 6	-

  From: 342,053 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Offset Ratchet Screwdriver (Bent-Up Head Type)

  ANEX

  [Features]· Uses an ultra-thin type head ratchet structure for convenient work in a tight workspace.· Magnet type chucking enables easy attachment and detachment of bits.[Applications]· For screw removal work in narrow places.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	6	-	Set Product	Square	NA	-	-	Stainless Steel	-	2.5 ～ 6	-

  From: 355,468 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Adjustable Cushioned Ratchet (with Magnet)

  HIRAI KOGU

  [Features]· As the shaft length is continuously retractable from a minimum of 80 mm to its longest length of 150 mm, it is perfect for attaching and removing screws in awkward spaces, etc.· Various bits can be stored by mounting them to dedicated holders, making them unlikely to be lost.· Turns almost any screw, such as hex socket bolts, hexalobular screws, Phillips screws, etc.· Includes a ratchet mechanism.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2	6	-	Set Product	Square	Available	-	-	Resin	-	2.5 ～ 6	-

  From: 830,461 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Offset Ratchet Driver With Forward/Reverse Switch

  SUNFLAG

  [Features]· Has a convenient ratchet function.· Comes with a quick-turning dial useful for temporary tightening.· With a forward/reverse switch.· Torque is greatly improved with special steel.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	4.5 ～ 7	-	Set Product	-	NA	-	-	Resin / Stainless Steel	-	2.5 ～ 5	-

  From: 337,976 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Mini Ratchet Bit Driver

  SUEKAGE TOOL

  [Features]・ Compact design ideal for carrying・ The mini ratchet is 52-tooth gear and it rotates nicely, improving work efficiency・ Rotating plastic case that opens and closes compactly・ Convenient for quick turning work・ Powerful mini ratchet for final tightening work

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	5	-	Set Product	Square	NA	NA	NA	-	-	4 ～ 6	-

  From: 1,010,905 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  "Long Magazine Bit Screwdriver" (Magnetic)

  TRUSCO NAKAYAMA

  [Features]· Supports 8 sizes with a single unit.· The head of the main body is an open type magnetic cap specification and can be used to store 7 bits.· The magnet prevents internal fluctuations, which allows for smooth work and mitigates discomfort.· It has an ergonomic handle certified by GS that's gentle on hands and prevents fatigue.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.0 / No.1 / No.2	4.5 ～ 6.5	128	Set Product	Round	Available	NA	NA	Rubber	-	-	-

  From: 704,649 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Offset Ratchet Driver TRD-415·TRD-417

  TRUSCO NAKAYAMA

  [Features]· The ratchet mechanism enables fast turning in tight spaces.[Applications]· For screw removal work in narrow places.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	4.5 ～ 6	-	Set Product	-	NA	-	-	Stainless Steel	-	-	-

  From: 318,735 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Strong Screwdriver Set

  PB SWISS TOOLS

  [Features]· The joint is a foldable type that can be used straight in rapid-turning and bent by 90° when fastening forcefully.· The grip is made of CAB (cellulose acetate butyrate) containing natural plant or cotton-based materials.· Grip is easy on the skin, ideal for gripping, impact-resistant and easy to maintain.· PB manufactures the handles without the use of cadmium, using a single recyclable material in order to achieve environment-frie...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	6.5 ～ 13	-	Set Product	Round	NA	-	-	Resin	1 ～ 2	3 ～ 8	-

  From: 5,955,881 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Replacement Precision Screwdriver Set

  PB SWISS TOOLS

  Interchangeable precision screwdriver set.[Features]· Roll case included.· Blade Length: 120 mm

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.00 / No.0	-	-	Set Product	Round	NA	-	-	Resin	-	1.5 ～ 3	-

  From: 1,912,704 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Type Ratchet Screwdriver Insider 3

  PB SWISS TOOLS

  Interchangeable Ratchet Screwdriver Insider 3 convenient for storage.[Features]・ It is possible to switch between right rotation, left rotation, and fixed・ 10 bits (1/4"" HEX type) can be stored in the grip[Applications]・ Used in combination with C6 series (1/4" HEX) bits・ Used in various environment in screw adjustment work, for both worksite and private usage・ Ideal for fast tightening and loosening work

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.2	5.5 ～ 6.25	-	Set Product	-	NA	-	-	Resin	0.8 ～ 1	-	-

  From: 2,754,074 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Plate ratchet replacement screwdriver

  KTC(KYOTO TOOL)

  [Features]· Ratchet operation in both right and left directions is possible with switching lever.· Rapid rotation is possible by rotating the gear with the fingertips.· Can use 6.3 mm width across flats hex bits.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.2 / No.3	-	-	Set Product	Square	NA	-	-	Stainless Steel	-	4 ～ 6	-

  From: 666,879 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Micro Impact Screwdriver Set (7 Pcs.)

  TRAD

  Ideal for tightening and loosening screws with stripped heads or rusty screws. For detailed work that requires securing a screw or bolt with the stripe of a hammer of via torque.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2	5.5	-	Set Product	Square	NA	NA	NA	-	-	5.5 ～ 8	-

  From: 363,211 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2WAY Ultra Slim Ratchet Screwdriver

  TRAD

  Double head with straight and bent noses18 mm Ultra-thin Head (Bit Included)Rising angle: 15°

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	6	-	Set Product	-	NA	NA	NA	-	-	3 ～ 4	-

  From: 347,676 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Tip standards
Tip size / Phillips (+)
Tip size / flathead (-) blade width (mm) B1
Shaft length L (mm)
Single Product/Set Classification
Shaft type
Magnet
Shaft through
Bolster
Grip Type
Tip size / flathead (-) blade thickness (mm) B2
(Box/Hex/Ball-Point) Width Across Flats (mm)
(Box/Hex/Ball-Point) Width Across Flats (inch)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	VESSEL	WERA	ANEX	VESSEL	VESSEL	TONE	VESSEL	WERA	PB SWISS TOOLS	VESSEL	VESSEL	TRUSCO NAKAYAMA	KTC(KYOTO TOOL)	WERA	WERA	PB SWISS TOOLS	HOZAN	ENGINEER	SUEKAGE TOOL	PB SWISS TOOLS	VESSEL	ENGINEER	ANEX	WERA	WERA	WERA	HOZAN	HOZAN	HOZAN	BAHCO	ENGINEER	WIHA	ANEX	ANEX	HIRAI KOGU	SUNFLAG	SUEKAGE TOOL	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	PB SWISS TOOLS	PB SWISS TOOLS	PB SWISS TOOLS	KTC(KYOTO TOOL)	TRAD	TRAD
Product SeriesDòng sản phẩm	20170718_Q80【6 Pieces Per Package】	Screwdriver, Tool Check Plus【39 Pieces Per Package】	Super Action Grip Screwdriver	Torx Plate Ratchet Screwdriver No.TX-11【10 Pieces Per Package】	Precision Screwdriver Set (With Clear Case)【6 Pieces Per Package】	Ratchet Driver Set RDS20	NO. TD-73MC Plate Ratchet Screw Catch	Screwdriver Set Craft Form XXL TX	Ratchet Driver Set 8510R-100SET 【21 Pieces Per Package】	NO. TD-79 Plate Ratchet Screwdriver	Plate Ratchet Screw Catch (Torx) No.TX-12MC	Screwdriver Set with Voltage Detector	Ratchet driver DBR	Micro Screwdriver Set - 12 pcs	Craft Form, Compact 60RA Set 【17 Pieces Per Package】	Stubby Interchangeable Ratchet Hex Screwdriver Set	Core Screwdriver Set D-16	Replacement Screwdriver Set DK-05 – 08	Mini Reverse Gear Ratchet	Ratchet Driver Set 8510R-30SET【21 Pieces Per Package】	NO. TD-72 Plate Ratchet Socket Screwdriver Set【5 Pieces Per Package】	Twin Wrench Screwdriver Set DR-07 【10 Pieces Per Package】	Compact ratchet 52 (straight type) set	Craft Form Screwdriver Set	Interchangeable ESD Micro Screwdriver (Anti-static Type)	Craft Form, Compact VDE60 Set	Core Screwdriver D-16-2B	Core Screwdriver D-16-1B	Core Screwdriver D-16-3B	BAHCO, Ratchet Screwdriver, Pistol Type	Bit Set DR-10 – 17	Torque Vario(R) Set	Offset Ratchet Driver (Straight Type)	Offset Ratchet Screwdriver (Bent-Up Head Type)	Adjustable Cushioned Ratchet (with Magnet)	Offset Ratchet Driver With Forward/Reverse Switch	Mini Ratchet Bit Driver	"Long Magazine Bit Screwdriver" (Magnetic)	Offset Ratchet Driver TRD-415·TRD-417	Replacement Strong Screwdriver Set	Replacement Precision Screwdriver Set	Replacement Type Ratchet Screwdriver Insider 3	Plate ratchet replacement screwdriver	Micro Impact Screwdriver Set (7 Pcs.)	2WAY Ultra Slim Ratchet Screwdriver
From	362,334 VND	4,937,696 VND	1,307,988 VND	266,900 VND	316,800 VND	2,560,305 VND	358,692 VND	3,103,233 VND	4,332,551 VND	265,200 VND	367,950 VND	331,196 VND	1,092,173 VND	3,026,308 VND	4,254,263 VND	1,324,645 VND	192,748 VND	506,262 VND	1,027,240 VND	4,235,962 VND	314,975 VND	634,103 VND	1,476,773 VND	3,661,200 VND	4,392,693 VND	4,440,105 VND	33,660 VND	33,660 VND	48,048 VND	1,895,478 VND	366,476 VND	11,736,378 VND	342,053 VND	355,468 VND	830,461 VND	337,976 VND	1,010,905 VND	704,649 VND	318,735 VND	5,955,881 VND	1,912,704 VND	2,754,074 VND	666,879 VND	363,211 VND	347,676 VND
Days to ShipSố ngày giao hàng	Same day	9 Day(s)	6 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	7 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	Same day	9 Day(s)	6 Day(s) or more	9 Day(s)	7 Day(s) or more	9 Day(s)	4 Day(s) or more	6 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	6 Day(s) or more	9 Day(s)	7 Day(s) or more	6 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	4 Day(s) or more	Quote	6 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	Same day	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	4 Day(s) or more	9 Day(s) or more
Tip standards	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination	Combination
Tip size / Phillips (+)	-	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.2	No.00	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.2	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.2	No.1 / No.2	No.1 / No.2 / No.3	No.00 / No.0	No.1 / No.2 / No.3	-	-	No.1 / No.2	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.2	No.00 / No.1 / No.2	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.00 / No.0 / No.1	No.0 / No.1 / No.2	-	-	-	No.1 / No.2	No.00 / No.1 / No.2	No.0 / No.1 / No.2	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.1 / No.2	-	No.1 / No.2 / No.3	No.0 / No.1 / No.2	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.00 / No.0	No.2	No.2 / No.3	No.1 / No.2	No.1 / No.2 / No.3
Tip size / flathead (-) blade width (mm) B1	-	5.5	6	6	-	5.5 ～ 8	4 ～ 6	2.5 ～ 7	4 ～ 8	4 ～ 6	6	3 ～ 5	5.5 ～ 8	1.5 ～ 3	5.5 ～ 8	-	1.35 ～ 3.6	3.5 ～ 5.5	4 ～ 7	4 ～ 8	-	4.5 ～ 6	6	6 ～ 8	1.5 ～ 3	2.5 ～ 6.5	1.9	1.35 ～ 1.4	2.65 ～ 3.1	4.5 ～ 5.5	4.5 ～ 6	-	6	6	6	4.5 ～ 7	5	4.5 ～ 6.5	4.5 ～ 6	6.5 ～ 13	-	5.5 ～ 6.25	-	5.5	6
Shaft length L (mm)	-	-	-	-	18 ～ 24	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	128	-	-	-	-	-	-	-
Single Product/Set Classification	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Single Item	Single Item	Single Item	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product	Set Product
Shaft type	-	-	Square	-	Round	Square	-	-	Square	-	-	Round	Square	Round	Round	Round	-	Round	-	Square	-	-	-	Round	-	-	-	-	-	-	-	-	Square	Square	Square	-	Square	Round	-	Round	Round	-	Square	Square	-
Magnet	-	NA	NA	NA	NA	Available	NA	-	NA	NA	NA	NA	NA	NA	NA	-	-	NA	NA	NA	NA	Available	NA	NA	NA	NA	-	-	-	NA	Available	NA	NA	NA	Available	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA
Shaft through	-	-	-	-	NA	-	-	-	-	-	-	NA	-	NA	-	-	-	-	-	-	-	-	-	NA	-	-	-	-	-	-	-	NA	-	-	-	-	NA	NA	-	-	-	-	-	NA	NA
Bolster	-	-	-	-	NA	-	-	-	-	-	-	NA	-	NA	-	-	-	-	-	-	-	-	-	NA	-	-	-	-	-	-	-	NA	-	-	-	-	NA	NA	-	-	-	-	-	NA	NA
Grip Type	-	Rubber	Resin	Stainless Steel	Resin	Resin	Resin	-	Resin	Stainless Steel	Stainless Steel	Resin	Rubber	Rubber	Rubber	-	Resin	Resin	-	Resin	Stainless Steel	Rubber	Resin	Rubber	Rubber	Rubber	Resin	Resin	Resin	Resin	-	Rubber	Stainless Steel	Stainless Steel	Resin	Resin / Stainless Steel	-	Rubber	Stainless Steel	Resin	Resin	Resin	Stainless Steel	-	-
Tip size / flathead (-) blade thickness (mm) B2	-	-	-	-	-	-	-	-	0.6 ～ 1.2	-	-	-	-	-	-	-	0.4 ～ 1.2	-	-	0.6 ～ 1.2	-	-	-	-	-	-	0.9	0.7 ～ 0.8	1 ～ 1.2	-	-	-	-	-	-	-	-	-	-	1 ～ 2	-	0.8 ～ 1	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (mm)	-0.9,-1.25,-1.8,-2.3,-3.0,-3.5	3–8	4 ～ 6	-	0.89 ～ 2.5	-	2.5 ～ 6	-	2.5 ～ 6	2.5 ～ 6	-	-	1.5 ～ 8	0.9 ～ 2	3 ～ 5	-	1.95 ～ 3.35	5.5	3 ～ 6	2.5 ～ 6	5.5 ～ 10	1.5 ～ 4	2.5 ～ 6	8 ～ 10	1.5 ～ 2	3 ～ 6	1.95 ～ 2.65	2.6 ～ 2.7	2.65 ～ 3.35	-	1.5 ～ 6	2 ～ 3	2.5 ～ 6	2.5 ～ 6	2.5 ～ 6	2.5 ～ 5	4 ～ 6	-	-	3 ～ 8	1.5 ～ 3	-	4 ～ 6	5.5 ～ 8	3 ～ 4
(Box/Hex/Ball-Point) Width Across Flats (inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…