Screwdrivers（Single Product/Set Classification：Single Item Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Testing Screwdriver (Pencil Type, 1035-L)

  ANEX

  [Features]· Since a neon tube is built-in, it is easy to tell whether electric power is present or not.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	-	-	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 162,000 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Replacement Power Screwdriver (Incorporating Magnet)

  ANEX

  [Features]· A replacement type screwdriver which can be used with a screwdriver bit (subtense 6.35 mm hex shaft).· The rear end of the handle can be used for turning eye bolts and thumb screws.· The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.[Applications]· + No. 2, -6 screwdriver· Piston Rotation· Wiring remover to be inserted in the terminal removing hole

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	135	Single Item	Square	Available	-	-	Rubber	-	-	-

  From: 192,098 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball point hex screwdriver 206S series

  PB SWISS TOOLS

  A screwdriver with excellent impact resistance of 1 t or higher. It is also resistant to oil and gasoline.[Features]· It can be used for general applications. Recyclable clip.· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.· Gentle to the skin and comforta...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Ballpoint	-	-	50 ～ 200	Single Item	Square	NA	NA	NA	Resin	-	1.27 ～ 10	-

  From: 426,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Offset Phillips Screwdriver

  PB SWISS TOOLS

  [Features]· Effective for work in a limited space where a normal screwdriver cannot be used.· The angle of each end is different (in the rotating direction), and it is possible to rotate bit by bit.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.1 / No.2 / No.3	-	-	Single Item	Round	NA	NA	NA	-	-	-	-

  From: 377,261 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Resin Handle Stubby Screwdriver (D1MS-6/D1PS-2)

  KTC(KYOTO TOOL)

  [Features]· Square resin grip which makes it easy to apply force.· Shaft is hexagon shaped.[Applications]· General purpose tool

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6	25	Single Item	Round	Available	NA	NA	Resin	1	-	-

  From: 163,615 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Wooden handle screwdriver (through, with magnet)

  KTC(KYOTO TOOL)

  [Features]· Natural wooden grip which is easy on the hands.· The shaft is round.· Shaft material is Cr-V.· The tip is magnetic.[Applications]· General purpose tool

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	5.5 ～ 8	75 ～ 150	Single Item	Round	Available	Available	NA	Wooden handle	0.75 ～ 1.1	-	-

  From: 222,280 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Grip Screwdriver No.4500

  VESSEL

  An easy-to-grip through screwdriver with an ergonomically designed grip.[Features]· A plastic handle through-type which is strong against rough use.· With a hexagon part that can be tightened strongly with a wrench, etc.· The handle is made of cellulose acetate resin and has an ergonomic design.[Applications]· Through hole type, for demanding work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3 / No.4	5.5 ～ 9	75 ～ 200	Single Item	Round	Available	Available	Included	Resin	0.8 ～ 1.2	-	-

  From: 177,125 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Flat Head Screwdriver with Cap (SoftFinish ®)

  WIHA

  [Features]· With a hex bolster for wrenches.· The hexagonal blade of this screwdriver passes completely through the handle portion and is received by a strong steel cap, allowing difficult screws to be hit with a hammer.· The blade is made of high grade chrome vanadium molybdenum steel.· It has been quenched with a chrome plated finish.· ChromTop Processed Tip

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	6.5	125	Single Item	Square	NA	Available	Included	Rubber	1.2	-	-

  From: 889,146 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Piercing Screwdriver

  TONE

  Standard type screwdriver with a wooden handle.[Features]· Standard type screwdriver with a wooden handle with a sense of warmth.· Through screwdriver.[Applications]· Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	4.5 ～ 9	50 ～ 200	Single Item	Round	NA	Available	NA	Wooden handle	0.6 ～ 1.1	-	-

  From: 161,621 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  "Quick Screwdriver for Electrical Work" (Magnetic)

  ANEX

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	5	75 ～ 150	Single Item	Round	Available	NA	NA	Rubber	-	-	-

  From: 149,470 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver with Anti-Drop Ring

  ANEX

  The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6	100 ～ 150	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 331,505 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pin vise TPVHK-0.6·TPVHK-0.9·TPVHK-1.2

  TRUSCO NAKAYAMA

  A pin vise with a thin shaft through handle.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	Single Item	-	-	-	-	-	-	-	-

  From: 215,788 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Driver

  VESSEL

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	-	-	-	Single Item	-	-	-	-	-	-	-	-

  From: 838,552 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Driver (SP-2.5, SP-3 Series)

  SMATO

  • Volume Discount

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	-	-	-	Single Item	Round	-	-	-	Rubber	-	-	-

  From: 368,250 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Magnetic Holder

  TRUSCO NAKAYAMA

  [Features]· The magnet can hold the bit.· The bit can be elongated for use with the mounting of a replacement handle.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Other	-	-	-	Single Item	-	Available	-	-	-	-	-	-

  From: 178,855 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hex wrench bit

  TRUSCO NAKAYAMA

  [Features]· A bit with hexagonal tip.· A bit with shaft diameter of 6.35 mm.· Can also be used on ratchet screwdrivers.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Hexagon	-	-	-	Single Item	-	NA	-	-	-	-	-	-

  From: 50,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  No.B-330 Woody Thru-Tang Screwdriver

  VESSEL

  [Features]· An anti-slip grip that does not slip, even in greasy hands. Uses "wood resin" that allows you to feel the texture and feel of natural wood・ A through type that can be hit with a hammer. With star shape nut・ The shaft is chrome vanadium steel, whole body hardened, black chrome-plating finish that resists rust・ PAT[Applications]・ Ideal for oily work such as automobile maintenance and metalworking

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.2	-	-	Single Item	Round	Available	Available	NA	Resin	-	-	-

  From: 208,550 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Grip Stubby Screwdriver

  TONE

  [Features]· Original Phillips head screwdriver tip shape fits perfectly to prevent tip extending to the bottom of the screw head slot.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	-	25	Single Item	Square	Available	NA	Included	Resin	-	-	-

  From: 190,803 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Reamer K-441/K-442/K-443/K-444

  HOZAN

  A taper reamer that boasts outstanding sharpness and durability.[Features]· K-441, K-442, K-443 and K-444 are available.· Can be used in various applications according to the hole diameters and taper angles.· Perfect for work that requires application of torque as it comes with a handle.· Allows cutting by rotating clockwise.· Excellent sharpness and outstanding durability.[Applications]· Ideal for modification and enlargement of holes i...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Other	-	-	-	Single Item	-	-	-	-	Stainless Steel	-	-	-

  From: 283,385 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Core Screwdriver D-16-4B

  HOZAN

  Driver for adjusting the ferrite core and pre-set knobs (with and without dial).[Features]· Material adopts polyacetal excellent in high insulation and wear resistance.· It does not damage the core or cause misalignment.· Tip size: 2.3 X 0.4, 3.6 X 0.4 (with guide).

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	2.3 ～ 3.6	-	Single Item	-	-	-	-	Resin	0.4	-	-

  From: 53,720 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Stubby Screwdriver SD-P

  TONE

  Phillips stubby screwdriver with an overall length of 70 mm.[Features]· The total length is short, making it ideal for working in narrow places.· Includes magnet.· A square shaft screwdriver.[Applications]· Automobile interiors, and maintenance of motorcycles, bicycles, and machinery.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.2	-	23	Single Item	Square	Available	NA	NA	Resin	-	-	-

  From: 133,903 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Baby Screwdriver BBD-M50

  TONE

  Baby screwdriver with round shaft.[Features]Convenient for adjustment of metering and precision equipment, etc.[Applications]· For assembly and maintenance of electronic devices and precision equipment.· Assembly and maintenance work of automobiles, motorcycles and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	3	50	Single Item	Round	NA	NA	NA	Resin	0.4	-	-

  From: 42,945 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Cushion Screwdriver (Stubby Type) No. 720

  VESSEL

  A compact screwdriver that's ideal for narrow spaces.[Features]· Cushion grip which fits the hands.· Plated with a rust-resistant, black chrome finish.· Stubby type that exhibits its power in a limited space.[Applications]· For various screw fastening work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2	6	15	Single Item	Round	Available	NA	NA	Rubber	0.9	-	-

  From: 72,300 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Vector Screwdriver for Electric Works No. 285

  VESSEL

  [Features]· The shaft is tough and whole body is quenched with excellent durable chromium vanadium metal.· The cutting edge has undergone high precision black point processing.· Thin shaft specification (6.4 mm) to enable terminal blocks in narrow gaps to be reached

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	5.5	100 ～ 150	Single Item	Round	Available	NA	NA	Rubber	0.9	-	-

  From: 151,934 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Pin Vise K-502

  HOZAN

  Fine drill pin vise for applications including but not limited to grasping small diameter drills and rotating them, including grasping pin (rod) shaped objects securely.[Features]· As the main body is compact, it is easy to see the work at hand.· Also, there is less load in continuous work as it is a light finish.· Body is rather thick which makes it easy to apply force, and it has line knurling which makes it anti-slip and easy to turn.[Applications]· It can also ...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	Single Item	-	-	-	-	-	-	-	-

  From: 276,066 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Split Grip Screwdriver (Through) YMD-150

  TONE

  A flathead screwdriver with improved strength thanks to a thicker and longer shaft.[Features]· Designed for power with shaft and handle fixing.[Applications]· Ideal for maintenance of machinery, automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	10	150	Single Item	Square	NA	Available	NA	Resin	1.2	-	-

  From: 493,759 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Crystalline Screwdriver No. 6300

  VESSEL

  Screwdriver ideal for extremely precise work.[Features]· The grip is made of plant-derived crystalline that's eco-friendly and resistant to oil and chemicals.· Color-coded by Phillips or flathead.· The end of the handle has a concave shape that allows fingertips to be used to push against and perform quick turning.· Cellulose acetate resin is used.· Hexagonal cross section accurately transmits torque.[Applications]· General precision work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3 / No.4	4.5 ～ 10	50 ～ 300	Single Item	Round	Available	NA	NA	Resin	0.6 ～ 1.2	-	-

  From: 63,000 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  MEGADORA Chisel Screwdriver No. 970

  VESSEL

  Heavy duty through type screwdriver that does not distort the cutting edge even when striking.[Features]· Utilizes special steel material for high-grade chisels.· Hardness of 58 HRC.· Pursues abrasion resistance and sharpness of the cutting edge.· Elastomer resin absorbs impacts to lessen hand fatigue.· Through type, with a large nut.· Carburized and quenched to minimize distortion of the nut.[Applications]· Processing and chipping of metals and rock.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	7	100	Single Item	Square	Available	Available	NA	Resin	1.5	-	-

  From: 341,850 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Twin Star DST-05

  ENGINEER

  A compact-type screwdriver.[Features]· 2-in-1, Phillips and flathead 2-way screwdriver bit.· Compact type has a total length of 85 mm.· The tip is a tough SK steel bit.[Applications]· Optimal for work in narrow locations where ordinary screwdrivers cannot reach.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6.3	23	Single Item	Round	NA	-	-	Resin	-	-	-

  From: 101,526 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Electroscopic Screwdriver DKD-01/DKD-02

  ENGINEER

  Screwdriver for low voltage and automobile spark plug electrical inspection.[Features]· With a clip, it is convenient for carrying around.· The built-in neon tube lights up.[Applications]· DKD-01: Ideal for conductivity and wireless communicator transmission tests.· DKD-02: Ideal for vehicle spark plug voltage detection.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	-	28	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 185,228 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver for Special Screw and for Pentalobular Screw

  ENGINEER

  A special screwdriver for pentalobe screws (star-shaped screws) used in smartphones, etc.[Features]·Tip size: 1.3 mm diameter (DTP-03), 1.7 mm diameter (DTP-07).[Applications]·Ideal for tightening and removing pentalobe screws (star-shaped screws).·mobile phone, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Other	-	-	75 ～ 100	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 431,590 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Water Faucet Screwdriver (With Wide Tip Width)

  TOP

  For cleaning/inspection, etc., of check valve with mixing faucet strainer.[Features]· Since it has a wide 18 mm tip, work can be done on the grooves in slotted screws without stripping.· TWD-45 is a stubby type (shaft length 45 mm)

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	18	45 ～ 100	Single Item	Round	NA	NA	NA	Resin	1.5	-	-

  From: 287,123 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Stubby Phosphorescent Screwdriver (Magnetic)

  ANEX

  [Features]· Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)· Made of martensitic special stainless steel (high strength stainless steel (550)).

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	5.5 ～ 8	75 ～ 150	Single Item	Round	Available	NA	NA	Rubber	-	-	-

  From: 203,593 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Slit power screwdriver (electric type/through/magnet included)

  ANEX

  [Features]· Non-slip, powerful slit shape and hexagon shape (grip end).· Includes a washer that can be hit with a hammer.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2	5.5 ～ 6	75 ～ 150	Single Item	Round	Available	Available	NA	Rubber	-	-	-

  From: 163,425 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Precision Screwdriver (3450)

  ANEX

  [Features]· A long shaft type.· Comes with rotating cap.· Acetate Resin Handle

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.00 / No.0	1.8 ～ 3	50 ～ 75	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 61,540 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pencil Type Inspection Screwdriver

  ANEX

  [Features]· It allows the presence of voltage to be checked in general households and factories.· It indicates conductivity with a buzzer and LED lamp.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	-	-	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 338,410 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Auto Tester (Pencil Type With Buzzer And LED)

  ANEX

  [Features]·A long-life LED is used, and the presence or absence of voltage in the vehicle and the polarity can be determined by sound and light.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	Single Item	-	-	-	-	-	-	-	-

  From: 443,530 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Flexible Shaft

  ANEX

  [Features]· Ideal for fastening screws on corners and edges.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	-	Single Item	Round	NA	-	-	Resin	-	-	-

  From: 218,036 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Quick Ball 60 Ratchet Screwdriver (Magnetic)

  ANEX

  [Features]·60 gear teeth. Smooth rotation and excellent workability.·A special minus shape that can be inserted into the removal hole of the wiring terminal.·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.·A replaceable bit that can also be used as an electric bit.·With magnet (bit).·The elastomer resin and ball-shaped handle are easy to apply force.·The insertion angl...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	95	Single Item	Square	Available	-	-	Rubber	-	-	-

  From: 376,663 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Screw-Catch Screwdriver

  HIRAI KOGU

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	4.3	200	Single Item	Round	Available	NA	NA	-	-	-	-

  From: 141,111 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Reverse Gear Ratchet

  SUEKAGE TOOL

  Has a compact head that is the best in its class. The number of gear teeth is 52, and it turns with a satisfying feeling, improving work efficiency. The total height of the head with the included short bit attached is 16.5 mm.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.2	-	-	Single Item	-	NA	-	-	-	-	-	-

  From: 813,691 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ordinary Screwdriver (With Magnet)

  TRUSCO NAKAYAMA

  Features a non-slip ergonomically designed grip.It has a magnet on the tip.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	5.5 ～ 8	75 ～ 150	Single Item	Round	Available	NA	NA	Rubber	-	-	-

  From: 155,566 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  "Radial Ball Grip Switchable Screwdriver" (4 Sizes, Magnetic)

  TRUSCO NAKAYAMA

  [Features]· Supports 4 sizes ((-) 6, (+) No.1, (+) No.2, (+) No.3) with a single unit.· The radially processed grip does not become slippery even with greasy hands.· It generates a powerful tightening torque, and has a strong ball cushioned grip.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2 / No.3	6	100	Single Item	Round	Available	-	NA	Rubber	-	-	-

  From: 210,332 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Offset Ratchet Driver TRD-415·TRD-417

  TRUSCO NAKAYAMA

  [Features]· The ratchet mechanism enables fast turning in tight spaces.[Applications]· For screw removal work in narrow places.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	-	Single Item	-	NA	-	-	Stainless Steel	-	-	-

  From: 209,553 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Nut driver total length 168 mm, 185 mm, 192 mm

  WERA

  [Features]· Since the shaft portion is hollow, the nut can be turned over the entire thread.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Box	-	-	70 ～ 80	Single Item	Round	NA	NA	NA	Rubber	-	5 ～ 13	-

  From: 541,800 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Tip standards
Tip size / Phillips (+)
Tip size / flathead (-) blade width (mm) B1
Shaft length L (mm)
Single Product/Set Classification
Shaft type
Magnet
Shaft through
Bolster
Grip Type
Tip size / flathead (-) blade thickness (mm) B2
(Box/Hex/Ball-Point) Width Across Flats (mm)
(Box/Hex/Ball-Point) Width Across Flats (inch)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	ANEX	ANEX	PB SWISS TOOLS	PB SWISS TOOLS	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	VESSEL	WIHA	TONE	ANEX	ANEX	TRUSCO NAKAYAMA	VESSEL	SMATO	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	VESSEL	TONE	HOZAN	HOZAN	TONE	TONE	VESSEL	VESSEL	HOZAN	TONE	VESSEL	VESSEL	ENGINEER	ENGINEER	ENGINEER	TOP	ANEX	ANEX	ANEX	ANEX	ANEX	ANEX	ANEX	HIRAI KOGU	SUEKAGE TOOL	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	WERA
Product SeriesDòng sản phẩm	Testing Screwdriver (Pencil Type, 1035-L)	Replacement Power Screwdriver (Incorporating Magnet)	Ball point hex screwdriver 206S series	Offset Phillips Screwdriver	Resin Handle Stubby Screwdriver (D1MS-6/D1PS-2)	Wooden handle screwdriver (through, with magnet)	Power Grip Screwdriver No.4500	Flat Head Screwdriver with Cap (SoftFinish ®)	Piercing Screwdriver	"Quick Screwdriver for Electrical Work" (Magnetic)	Screwdriver with Anti-Drop Ring	Pin vise TPVHK-0.6·TPVHK-0.9·TPVHK-1.2	Ceramic Driver	Precision Driver (SP-2.5, SP-3 Series)	Magnetic Holder	Hex wrench bit	No.B-330 Woody Thru-Tang Screwdriver	Power Grip Stubby Screwdriver	Taper Reamer K-441/K-442/K-443/K-444	Core Screwdriver D-16-4B	Stubby Screwdriver SD-P	Baby Screwdriver BBD-M50	Cushion Screwdriver (Stubby Type) No. 720	Vector Screwdriver for Electric Works No. 285	Pin Vise K-502	Split Grip Screwdriver (Through) YMD-150	Crystalline Screwdriver No. 6300	MEGADORA Chisel Screwdriver No. 970	Twin Star DST-05	Electroscopic Screwdriver DKD-01/DKD-02	Screwdriver for Special Screw and for Pentalobular Screw	Water Faucet Screwdriver (With Wide Tip Width)	Stubby Phosphorescent Screwdriver (Magnetic)	Slit power screwdriver (electric type/through/magnet included)	Precision Screwdriver (3450)	Pencil Type Inspection Screwdriver	Auto Tester (Pencil Type With Buzzer And LED)	Flexible Shaft	Quick Ball 60 Ratchet Screwdriver (Magnetic)	Screw-Catch Screwdriver	Mini Reverse Gear Ratchet	Ordinary Screwdriver (With Magnet)	"Radial Ball Grip Switchable Screwdriver" (4 Sizes, Magnetic)	Offset Ratchet Driver TRD-415·TRD-417	Nut driver total length 168 mm, 185 mm, 192 mm
From	162,000 VND	192,098 VND	426,665 VND	377,261 VND	163,615 VND	222,280 VND	177,125 VND	889,146 VND	161,621 VND	149,470 VND	331,505 VND	215,788 VND	838,552 VND	368,250 VND	178,855 VND	50,000 VND	208,550 VND	190,803 VND	283,385 VND	53,720 VND	133,903 VND	42,945 VND	72,300 VND	151,934 VND	276,066 VND	493,759 VND	63,000 VND	341,850 VND	101,526 VND	185,228 VND	431,590 VND	287,123 VND	203,593 VND	163,425 VND	61,540 VND	338,410 VND	443,530 VND	218,036 VND	376,663 VND	141,111 VND	813,691 VND	155,566 VND	210,332 VND	209,553 VND	541,800 VND
Days to ShipSố ngày giao hàng	9 Day(s)	Same day	6 Day(s) or more	6 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	4 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	Same day or more	4 Day(s)	Same day or more	7 Day(s) or more	Same day or more	9 Day(s)	Same day	6 Day(s) or more	9 Day(s)	9 Day(s)	Same day	9 Day(s)	8 Day(s) or more	5 Day(s) or more	6 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	Same day	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	10 Day(s)	6 Day(s) or more	9 Day(s)	6 Day(s) or more	9 Day(s)	6 Day(s) or more	Same day or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more
Tip standards	Flathead (-)	Phillips (+)/Flathead(-)	Ballpoint	Phillips (+)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	-	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Other	Hexagon	Phillips (+)	Phillips (+) / Flathead (-)	Other	Flathead (-)	Phillips (+)	Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	-	Flathead (-)	Phillips (+) / Flathead (-)	Flathead (-)	Phillips (+)/Flathead(-)	Flathead (-)	Other	Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Flathead (-)	-	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	Phillips (+)	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-)	Box
Tip size / Phillips (+)	-	No.2	-	No.1 / No.2 / No.3	No.2	No.1 / No.2 / No.3	No.1 / No.2 / No.3 / No.4	-	No.1 / No.2 / No.3	No.2	No.2	-	-	-	-	-	No.2	No.2	-	-	No.2	-	No.1 / No.2	No.2	-	-	No.1 / No.2 / No.3 / No.4	-	No.2	-	-	-	No.1 / No.2 / No.3	No.1 / No.2	No.00 / No.0	-	-	No.2	No.2	No.2	No.2	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.2	-
Tip size / flathead (-) blade width (mm) B1	-	6	-	-	6	5.5 ～ 8	5.5 ～ 9	6.5	4.5 ～ 9	5	6	-	-	-	-	-	-	-	-	2.3 ～ 3.6	-	3	6	5.5	-	10	4.5 ～ 10	7	6.3	-	-	18	5.5 ～ 8	5.5 ～ 6	1.8 ～ 3	-	-	6	6	4.3	-	5.5 ～ 8	6	6	-
Shaft length L (mm)	-	135	50 ～ 200	-	25	75 ～ 150	75 ～ 200	125	50 ～ 200	75 ～ 150	100 ～ 150	-	-	-	-	-	-	25	-	-	23	50	15	100 ～ 150	-	150	50 ～ 300	100	23	28	75 ～ 100	45 ～ 100	75 ～ 150	75 ～ 150	50 ～ 75	-	-	-	95	200	-	75 ～ 150	100	-	70 ～ 80
Single Product/Set Classification	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item
Shaft type	Round	Square	Square	Round	Round	Round	Round	Square	Round	Round	Round	-	-	Round	-	-	Round	Square	-	-	Square	Round	Round	Round	-	Square	Round	Square	Round	Round	Round	Round	Round	Round	Round	Round	-	Round	Square	Round	-	Round	Round	-	Round
Magnet	NA	Available	NA	NA	Available	Available	Available	NA	NA	Available	NA	-	-	-	Available	NA	Available	Available	-	-	Available	NA	Available	Available	-	NA	Available	Available	NA	NA	NA	NA	Available	Available	NA	NA	-	NA	Available	Available	NA	Available	Available	NA	NA
Shaft through	NA	-	NA	NA	NA	Available	Available	Available	Available	NA	NA	-	-	-	-	-	Available	NA	-	-	NA	NA	NA	NA	-	Available	NA	Available	-	NA	NA	NA	NA	Available	NA	NA	-	-	-	NA	-	NA	-	-	NA
Bolster	NA	-	NA	NA	NA	NA	Included	Included	NA	NA	NA	-	-	-	-	-	NA	Included	-	-	NA	NA	NA	NA	-	NA	NA	NA	-	NA	NA	NA	NA	NA	NA	NA	-	-	-	NA	-	NA	NA	-	NA
Grip Type	Resin	Rubber	Resin	-	Resin	Wooden handle	Resin	Rubber	Wooden handle	Rubber	Rubber	-	-	Rubber	-	-	Resin	Resin	Stainless Steel	Resin	Resin	Resin	Rubber	Rubber	-	Resin	Resin	Resin	Resin	Resin	Resin	Resin	Rubber	Rubber	Resin	Resin	-	Resin	Rubber	-	-	Rubber	Rubber	Stainless Steel	Rubber
Tip size / flathead (-) blade thickness (mm) B2	-	-	-	-	1	0.75 ～ 1.1	0.8 ～ 1.2	1.2	0.6 ～ 1.1	-	-	-	-	-	-	-	-	-	-	0.4	-	0.4	0.9	0.9	-	1.2	0.6 ～ 1.2	1.5	-	-	-	1.5	-	-	-	-	-	-	-	-	-	-	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (mm)	-	-	1.27 ～ 10	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5 ～ 13
(Box/Hex/Ball-Point) Width Across Flats (inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	ANEX	ANEX	PB SWISS TOOLS	PB SWISS TOOLS	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	VESSEL	WIHA	TONE	ANEX	ANEX	TRUSCO NAKAYAMA	VESSEL	SMATO	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	VESSEL	TONE	HOZAN	HOZAN	TONE	TONE	VESSEL	VESSEL	HOZAN	TONE	VESSEL	VESSEL	ENGINEER	ENGINEER	ENGINEER	TOP	ANEX	ANEX	ANEX	ANEX	ANEX	ANEX	ANEX	HIRAI KOGU	SUEKAGE TOOL	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	WERA
Product SeriesDòng sản phẩm	Testing Screwdriver (Pencil Type, 1035-L)	Replacement Power Screwdriver (Incorporating Magnet)	Ball point hex screwdriver 206S series	Offset Phillips Screwdriver	Resin Handle Stubby Screwdriver (D1MS-6/D1PS-2)	Wooden handle screwdriver (through, with magnet)	Power Grip Screwdriver No.4500	Flat Head Screwdriver with Cap (SoftFinish ®)	Piercing Screwdriver	"Quick Screwdriver for Electrical Work" (Magnetic)	Screwdriver with Anti-Drop Ring	Pin vise TPVHK-0.6·TPVHK-0.9·TPVHK-1.2	Ceramic Driver	Precision Driver (SP-2.5, SP-3 Series)	Magnetic Holder	Hex wrench bit	No.B-330 Woody Thru-Tang Screwdriver	Power Grip Stubby Screwdriver	Taper Reamer K-441/K-442/K-443/K-444	Core Screwdriver D-16-4B	Stubby Screwdriver SD-P	Baby Screwdriver BBD-M50	Cushion Screwdriver (Stubby Type) No. 720	Vector Screwdriver for Electric Works No. 285	Pin Vise K-502	Split Grip Screwdriver (Through) YMD-150	Crystalline Screwdriver No. 6300	MEGADORA Chisel Screwdriver No. 970	Twin Star DST-05	Electroscopic Screwdriver DKD-01/DKD-02	Screwdriver for Special Screw and for Pentalobular Screw	Water Faucet Screwdriver (With Wide Tip Width)	Stubby Phosphorescent Screwdriver (Magnetic)	Slit power screwdriver (electric type/through/magnet included)	Precision Screwdriver (3450)	Pencil Type Inspection Screwdriver	Auto Tester (Pencil Type With Buzzer And LED)	Flexible Shaft	Quick Ball 60 Ratchet Screwdriver (Magnetic)	Screw-Catch Screwdriver	Mini Reverse Gear Ratchet	Ordinary Screwdriver (With Magnet)	"Radial Ball Grip Switchable Screwdriver" (4 Sizes, Magnetic)	Offset Ratchet Driver TRD-415·TRD-417	Nut driver total length 168 mm, 185 mm, 192 mm

Loading...Tải…