Pliers/Nippers/Pincers（Nipper Type：Nippers Page2）

Micro Nipper NS-06

ENGINEER

Wire cutters most ideal for work around the circuit board of precision equipment, etc.[Features]・ They are dedicated to soft wire rod such as copper wire・ It features eco-friendly material elastomer and fits gently in the hand・ It is a ESD-safe product with antistatic measures and has a surface resistor value of 1 × 10^6 to 10^7 Ω, so you can use it safely even for works on a circuit board・ Grip end is also equipped with a strap mounting hol...Readmore

High Strength Nippers (with Hole)

ENGINEER

[Features]· Equipped with holes (φ1.2 A and φ1.6 A) for stripping.· Material: High Carbon Steel

(Merry) Standard Nippers

MUROMOTO TEKKO

Since it has a thin blade, it is suitable for cutting thin cables, and is widely used for cutting low-power electrical equipment and precision equipment, etc.

(Merry) Miniature Plastic Nippers

MUROMOTO TEKKO

[Features]· Ideal for cutting resin of up to φ3 mm.· Ideal for detailed work because it is small and lightweight.

Plastic Wire Cutters, Round Blade

MUROMOTO TEKKO

[Features]・ Ideal for cutting resins up to ø5 mm.・ The most standard plastic wire cutters.

Lightweight Nippers

THREE PEAKS GIKEN

[Features]· Lightweight nippers to prevent fatigue even after long hours of work.· With almost no change in total length, we changed the shape of the handle and drastically reduced the thickness of the head.· Elastomer resin grip that comfortably fits the hand.

Long Stainless Steel Nippers

THREE PEAKS GIKEN

Rust-resistant stainless steel wire cutters.[Features]・ They are made of rust-resistant stainless steel・ Handle parts with elastomer resin grips that fit easily in the hand・ They do not pollute the environment when burned・ With a plastic spring with excellent durability・ Large wire cutters among the stainless steel series. They are large but lightweight compared to a forged product of the same size・ Precision screw mount that prevents lo...Readmore

Small Nipper

TRUSCO NAKAYAMA

[Features]· Small, lightweight nippers, ideal for cutting ultra-fine wires in the field of electronics and precision instruments.[Applications]· Nippers for assembly and repair of AV/communication/precision equipment and for hobbyist use.

Plastic Nippers, TBPN125/150

TRUSCO NAKAYAMA

Plastic wire cutters having the most versatile shape.[Features]・ Ideal for deburring resin products, etc.・ Mirror finish on the blade part.[Application]・ For deburring resin products, etc.・ For gate cutting and deburring of plastic models and plastic molded goods.

Catch Nipper with Spring

FUJIYA

Wire cutters dedicated for plastic cutting with shatter resistant plate.[Features]・ Since they sandwich with 2 plates, it surely catches the scrap・ It is possible to prevent loss of scraps and improve work efficiency・ Since sharp blades for plastic can cut lightly, and can make cutting surface neatly, so you can prevent injuries due to uncut edges・ Twp plates sandwich with surfaces, so you can pick the cut edge with great force・ Plastic blade...Readmore

Nippers, with Two Oblique Blades (Round Blades)

FUJIYA

Nippers featuring durability and blade toughness.[Features]·Since the blade is angled, the cutting work can be done smoothly without getting in the way of fingers.·Excellent cutting ability.·Lightweight, strong and very easy to use.· JIS-compliant product. (50 A-125/50 A-150)[Applications]·For cutting work in wiring work related to electricity and communication.

Protek Nipper (Round Blade)

FUJIYA

Sharpness is ensured using the latest blade polishing technology.

Three Piece Diagonal Nipper

TOP

Useful for stripping and cutting in general electrical work and stranded cable[Features]· Triple layer structure prevents occurrence of play even after firm use.· The cutting edge is flat, and inclined at 37°.· The portion of the grip that contacts the user's hand is processed with a soft elastomer.· The hole in the grip part allows for the use of a fall prevention cord.· Spring part adopts a leaf spring that is highly durable and has adjustable recoil force

Heavy-Duty Nippers, Sharp Blade (With Spring) 707S-150

FUJIYA

General-use model of heavy-duty nippers. [Features]· Professional specification in which a special high-performance steel is processed with a unique heat treatment.· Compared with conventional nippers, the cutting edge is large with a tough finish, so it has excellent sharpness and durability.· Particularly suited to cutting piano wire, wiring wire, spring wire, etc.· Opening and closing is a breeze because it uses a spring, so continuou...Readmore

Plastic Nippers 90S-110/90S-125/90S-150

FUJIYA

Perfect nippers for cutting hard resin (plastic). [Features]· Because the side is equipped with a blade adjustment stopper screw, there is less waste, and the blade is also protected.· The blade shape is a round blade.· Achieves amazing cutting ability using "micro mirror blade" technology for the blade. *90S-150 only.· Because of the coil spring, even continuous cutting is comfortable.· Uses a hygienic antibacterial resin for the grip. [Applicati...Readmore

Plastic nippers 90-150/90-175/90A-150/90A-200

FUJIYA

Perfect nippers for cutting hard resin (plastic). [Features]· Because the side is equipped with a blade adjustment stopper screw, there is less waste, and the blade is also protected.· With cutting-edge polishing technology called a "micro mirror blade," you can effortlessly cut coated wires and achieve a clean finish on the cut edge.· Uses a hygienic antibacterial resin for the grip. [Applications]· For gate cutting and deburring with plastic model...Readmore

Nippers (PN1)

KTC(KYOTO TOOL)

[Features]· Multi-functional type in which the tip is suitable for cutting soft wires such as copper wires and other fine wires, while the points nearby the joint is suitable for cutting stiff wires such as piano wires.[Applications]· General purpose tool

Plate Nipper

KTC(KYOTO TOOL)

[Features]· Suitable for cutting printed circuit board lead wire.· With a blade latch stopper, it is easy to switch hands.· With a cutting chip scatter-resistant function, the chips will not disperse when cutting.[Applications]· General purpose tool

Slant Nippers NN-125

TONE

A tool for cutting thin wires and copper wires used in weak current work. (Iron wires cannot be cut)[Features]· Compared to high-strength nippers, the cutting surface is flat.[Applications]· Ideal for wiring, detailed work and repair of telecommunications equipment, radios, televisions, etc.

Plastic Nippers 7211-160

KNIPEX

It can cleanly cut soft materials such as lead and plastic parts.[Features]· 45° bent tip type.· Equipped with a spring.· The blade is straight with the cutting face given a flat finish.· Head finish: Polished.· Handle specification: Plastic coating.

Karui! Light Plastic Nipper (with Spring)

TSUNODA

Because the blade is sharp and light in weight, it can be easily used even for continuous work for a long time.

Mini End Nipper

TSUNODA

For assembling models and cutting protrusions of rattan work.

Long Nose Plier With Serrated Tip

KEIBA

Well regarded as highest class longnose pliers in both Japan and abroad. Heat treatment paying close attention to the toughness of the tip has been applied so that the thin tip can endure severe work.

Electrician's F Nipper

THREE PEAKS GIKEN

Hard wires such as piano wire cannot be used, but nippers that cleanly cut VVF wire and copper wire.[Features]·VVF wire (3 cores) can be cut up to 2.0 mm.·The blade is thin and sharp so that it can easily bite into the resin of the wire, giving it excellent sharpness.・ Handle parts are elastomer resin grips that fit easily in the hand.·It does not pollute the environment when burned.·Comes with a grip hole for attaching a fall prevention strap.[App...Readmore

Top Cutter

THREE PEAKS GIKEN

[Features]· Ideal for cutting plastic gates in narrow and deep areas.· The blade can be inserted directly from above.· Reverse grasp possible.

Hi-Plastic Nippers

THREE PEAKS GIKEN

[Features]· Excellent wear resistance, maintaining good sharpness with special alloy steel.· Equipped with a stopper for preventing misalignment of the blades.

Heavy-Duty Nippers SN-□

MITOLOY

[Features]· With hole for stripping wire material.· The blade part is high-frequency quenched and has excellent cutting sharpness.

Super Nippers 7831-125

KNIPEX

Precision pliers that are suitable for fine cutting work of electronics and precision machinery 7831-125. [Features]· The joint part is linked with a stainless rivet.· Can move very smoothly with little force.· The blade is straight and has a flat cutting surface.· Comes with an open spring which is convenient for repetitive tasks and a stopper that prevents the tip from opening further than a certain spacing.· The head is narrow.· The hardness of the c...Readmore

Powerful Nipper

SESHIN BUFFALO

Precision Nipper N-57

HOZAN

HOZAN's precision nipper with a high-precision finish has been achieved via a combination of highly durable materials and precision machining.[Features]· The highly tough machined handle has been thinned up to 1.7 mm.· Processing technology with high toughness and precision is used on the inner material hidden by the grip with an electrostatic discharge (ESD) specification.· Improved durability.· A high precision of 1/100 with no r...Readmore

Miniature Nippers N-34

HOZAN

Copper and other soft wire dedicated nippers that place emphasis on the cutting surface finish.[Features]· Compact size of about 100 mm total length that fits in the palm of a woman.· Ideal for precision work with a sense of size that makes rotation easy to control.· With a cutting edge that can cut lightly and produces a clean cross-section, finished exclusively for copper wires.· Has thin and flat blades that can do side cutting with little p...Readmore

Slant Edge Nippers N-4

HOZAN

Angled finishing nippers with great sharpness.[Features]· Sharp and easy-to-use angled blade that's suitable for cutting copper wires.[Applications]· Ideal for vertical cutting of parallel lines.

SUS Nipper SKN-150

TONE

Stainless steel nippers.[Features]· Ideal for cutting, bending, pinching, pulling and twisting copper or iron wires or inserting/removing small objects.· Material adopts martensitic stainless steel which emphasizes strength.· Stainless steel tool with excellent corrosion resistance, chemical resistance and hygiene.[Applications]· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine...Readmore

End Nippers N-33

HOZAN

Nippers with a long blade length.[Features]· Equipped with coil spring to prevent fatigue even during continuous work.· As the blade is long, it is possible to cut 4 wires coming out of a modular jack at once.[Applications]· Ideal for cutting in deep places (slanted type).

Nipper N-12

HOZAN

Nippers with a sliding part that adopts a round Tyco type to enable heavy duty cutting.[Features]· Copper wire: 3.2 mm diameter, copper wire: 3.5 mm², iron wire: 1.9 mm diameter, VVF: 1.6 mm diameter x 2 cores.· Round rubberized sliding portion capable of powerful cutting.[Applications]· Powerful type with round rubberized-type grip, ideal for cutting copper wires and iron wires.

Multi Snip N-839

HOZAN

A multi-snip tool that can cut thin plates of aluminum plate in addition to VVR.[Features]· Cutting capacity (VCT wire): 3.5 mm2 x 4 cores.· VVR wire: 3.5 mm2 x 3-cores.· Aluminum plate: 1.2 mm.· Copper stranded wire: 8 mm2.· Hardness HRC (blade): 58.[Applications]· Ideal for cutting and stripping thick wires.

Precision Nipper N-55

HOZAN

Nipper with a high-precision finish achieved via a combination of high-durability material and precision machining.[Features]· HOZAN's precision series made of alloy steel molded in precision grinding with toughness and hardness used for cutting tools.· Enables safe precision wiring work without short circuit, discharge or scratches to parts.· The machined handle portion has been thinned down to 1.7 mm, opens and closes smoothly, and fe...Readmore

Standard Nippers Black Finish

BAHCO

By adopting an ergo-grip handle, the head is made smaller compared to other manufacturers, but this still enables cutting piano wire.[Features]· Nippers for both high strength and soft wire: dual purpose. Soft wire (copper wire, cable strands etc.) cut at the tip, hard wire (piano wire etc.) cut at the base of the blades close to the joint

Tip Cutter NZ-05

ENGINEER

Tip cutter for precision work.[Features]・ It features eco-friendly material elastomer and fits gently in the hand・ It is a ESD-safe product with antistatic measures and has a surface resistor value of 1 × 10^6 to 10^7 Ω, so you can use it safely even for works on a circuit board・ It is ideal for cutting thin and deep inserts with a blade tip angle of 45°[Applications]・ It is ideal for cutting fine wires in vertical precision work

Plastic Nippers (NP04)

ENGINEER

[Features]· Ideal for deburring and gate cutting of plastic extrusion moldings.· Material: High Carbon Steel

High Strength Nippers NK-36

ENGINEER

Powerful wire cutters with excellent sharpness and durability.[Features]・ Hardness of blade is HRC60±4, and steel wire with a diameter of 2 mm can be cut[Applications]・ They are ideal for cutting work such as in electronic work and precision wiring

Slant Edge Nippers NN-56

ENGINEER

Inclined wire cutters with excellent sharpness and ease of use.[Features]・ Material: high carbon steel[Applications]・ For cutting wiring hidden behind the objects・ For precision wiring work, etc.

Slant Edge Nippers (with Hole)

ENGINEER

[Features]· Slant edge nippers with excellent sharpness and usability.· Material: High carbon steel.

Strong Nippers Elastomer G

HANAZONO TOOL

[Features]· Ideal for electrical work.· With superior cutting capacity and durability, it is used extensively for electric work.· Elastomer resin grip that comfortably fits the hand.

High Power Eccentricity Electric Work Nipper

HANAZONO TOOL

[Features]· Includes crimping function for simple crimping between 1.25 and 3.5 mm.· A powerful blade type that can cut hard wires, piano wires and boot bands.· Eccentric mechanism used for light cutting.· Elastomer resin grip that comfortably fits the hand.