MAKOTOLOY Chamfering / Centering Tools（Single blade, two blades：Single blade）

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]·1 pc. of V-cut end mill can be used for various purposes such as centering countersinking, inner chamfering, outer peripheral chamfering, side machining, V-groove, drilling, and is ideal for MC and NC machining·Since the cutting tip is close to the V edge, the residue on the bottom during V-groove machining is very few·Since it is based on a carbide end mill with a right blade and a right twist of 30°, the sharpness is one of the best and the discharge of cutting chips is also good·Since the ultra-fine carbide alloy is used as the carbide material, it has a lifespan approx. 10 times longer than that of HSS end mill. Furthermore, the V-cut end mill coating series has a long lifespan and increases cutting speed to shorten machining time・ Standard type

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,168,698 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,601,146 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,168,698 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,168,698 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,601,146 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,601,146 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide V Cut End Mill Long Type Coated Series AMVL 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,370,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,370,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,370,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	60	Hole Chamfer / Chamfering/Horizontal	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Standard Type, TiN Coat, 90°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: 2,607,406 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Standard Type, TiN Coat, 120°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	120	Centering (Positioning) / Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: 2,607,406 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Long Type, TiN Coat, 90°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	90	Centering (Positioning) / Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: 3,362,911 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Long Type, TiN Coat, 120°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	120	Centering (Positioning) / Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: 3,362,911 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY
Product SeriesDòng sản phẩm	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°	Carbide V Cut End Mill Long Type Coated Series AMVL 120°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°	V Spot Carbide Drill, Standard Type, TiN Coat, 90°	V Spot Carbide Drill, Standard Type, TiN Coat, 120°	V Spot Carbide Drill, Long Type, TiN Coat, 90°	V Spot Carbide Drill, Long Type, TiN Coat, 120°
From	2,168,698 VND-	2,601,146 VND-	2,168,698 VND-	2,906,958 VND-	2,752,725 VND-	2,752,725 VND-	2,168,698 VND-	2,906,958 VND-	2,906,958 VND-	2,601,146 VND-	2,601,146 VND-	3,109,123 VND-	3,109,123 VND-	3,109,123 VND-	2,370,248 VND-	2,370,248 VND-	2,370,248 VND-	2,752,725 VND-	2,607,406 VND-	2,607,406 VND-	3,362,911 VND-	3,362,911 VND-
Days to ShipSố ngày giao hàng	7 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Tool Diameter (D)(mm)	1 ～ 20	3 ～ 20	1 ～ 20	1 ～ 20	0.3 ～ 0.9	0.3 ～ 0.9	1 ～ 20	1 ～ 20	1 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25
Tip angle (θ)	60	90	120	90	90	120	90	60	120	60	120	60	90	120	60	90	120	60	90	120	90	120
Application	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer
work material	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Coating Y/N	NA	NA	NA	Available	Available	Available	NA	Available	Available	NA	NA	Available	Available	Available	NA	NA	NA	Available	Available	Available	Available	Available
Coating Type	-	-	-	TiAlN	TiAlN	TiAlN	-	TiAlN	TiAlN	-	-	TiAlN	TiAlN	TiAlN	-	-	-	TiAlN	TiN	TiN	TiN	TiN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…