ENGINEER Screwdrivers（Shaft type：Round）

• You can add up to 6 items per a category to the compare list. Compare

  

  Miniature Screwdriver

  ENGINEER

  Select Phillips or flathead

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.000	1.6	30	Single Item	Round	NA	NA	NA	Resin	0.3	-	-

  From: 13,260 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Soft Screw Driver DG-21 – 24

  ENGINEER

  Mini soft screwdriver ideal for tightening and removing various screws.[Features]· It is a soft grip which fits well in the hand.· The shaft is chrome-vanadium steel.· The tip has been black-point processed.[Applications]· For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.00 / No.0	3 ～ 4	80	Single Item	Round	NA	NA	NA	Rubber	0.4 ～ 0.5	-	-

  From: 138,293 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Electroscopic Screwdriver DKD-01/DKD-02

  ENGINEER

  Screwdriver for low voltage and automobile spark plug electrical inspection.[Features]· With a clip, it is convenient for carrying around.· The built-in neon tube lights up.[Applications]· DKD-01: Ideal for conductivity and wireless communicator transmission tests.· DKD-02: Ideal for vehicle spark plug voltage detection.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	-	28	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 185,228 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver for Precision Special Screws DAP-01/DAP-02

  ENGINEER

  A compact design screwdriver for precision special screws.[Features]· The grip part has a rotating cap.· Uses anti-slip knurling.· DAP-01: For adjustment work of star-shaped screws (pentalobular screws).· DAP-01: For smartphone strap attachment and repair.[Applications]· DAP-01: Ideal for accessory replacement of smartphones.· DAT-02: Ideal for repair and maintenance of portable game machines.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx / Other	-	-	23	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 279,928 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  LED Electrical Screwdriver DKD-03

  ENGINEER

  LED electrical test screwdriver that can perform conduction checks.[Features]· Bright LED inside the grip is turned on when the tip comes into contact with the live wire end of sockets for regular homes/factories.· Includes a blade tip protection cap.[Applications]· For checking the conductivity of electric products.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	3	20	Single Item	Round	NA	NA	NA	Resin	0.4	-	-

  From: 226,961 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Set for Special Screw

  ENGINEER

  Screwdriver bit series that is compatible with various special screws.[Features]・ Selectable according to screw shape and application[Applications]・ Mobile phones, hard disks, toys, small radio-controlled models, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx / Other	-	-	-	Single Item	Round	Available	-	-	-	-	-	-

  From: 200,546 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Driver

  ENGINEER

  Standard-type Phillips screwdrivers and flathead screwdrivers.[Features]· Selection of various sizes is enabled in accordance with work applications.[Applications]· For work tightening and removing Phillips screws/flathead screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.00 / No.0 / No.1 / No.2	2.6 ～ 5.5	50 ～ 150	Single Item	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: 19,040 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pro Use Screwdriver

  ENGINEER

  Knurled driver can perform rapid turning.[Features]· The shaft is made of chrome-vanadium steel, and the tip has undergone black point processing.· A large grip that produces high clamping force.[Applications]· For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.00 / No.0 / No.1 / No.2	3 ～ 5.5	75 ～ 100	Single Item	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: 92,335 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver for Special Screw and for Pentalobular Screw

  ENGINEER

  A special screwdriver for pentalobe screws (star-shaped screws) used in smartphones, etc.[Features]·Tip size: 1.3 mm diameter (DTP-03), 1.7 mm diameter (DTP-07).[Applications]·Ideal for tightening and removing pentalobe screws (star-shaped screws).·mobile phone, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Other	-	-	75 ～ 100	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 431,590 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Special Screw Bit Set DR-18

  ENGINEER

  Special screw bit set for the screwdriver bit series that is compatible with various special screws.[Features]・ A 10-piece set of DR-81 to 93・ With a bit holder[Applications]・ For all maintenance of mobile phones, PHS, wireless devices, PCs, home game machines, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	-	-	Set Product	Round	Available	-	-	-	-	-	-

  From: 1,846,269 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Micro Screwdriver DM

  ENGINEER

  [Features]· Ideal for installing and removing precision screws. · Handle includes rotation cap for quick turning. · With anti-slip knurling.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	-	-	Single Item	Round	-	-	-	-	-	-	-

  From: 66,849 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Twin Star DST-05

  ENGINEER

  A compact-type screwdriver.[Features]· 2-in-1, Phillips and flathead 2-way screwdriver bit.· Compact type has a total length of 85 mm.· The tip is a tough SK steel bit.[Applications]· Optimal for work in narrow locations where ordinary screwdrivers cannot reach.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6.3	23	Single Item	Round	NA	-	-	Resin	-	-	-

  From: 101,526 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Nut Screwdriver DN

  ENGINEER

  Dedicated screwdriver for tightening and removing hex threads and bolts that can be selected according to the work application.[Features]・ It adopts a plastic handle・ It has excellent abrasion resistance

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Box	-	-	75 ～ 125	Single Item	Round	NA	NA	NA	Resin	-	4 ～ 12	-

  From: 58,140 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Grip Screwdriver DG-11 – 14

  ENGINEER

  Screwdriver with a cushion grip that fits well in the hand, that produces outstanding clamping force.[Features]・ Shaft is made of chrome vanadium steel・ Black point processing is applied at the tip[Applications]・ For tightening and removing various screws

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6	225 ～ 275	Single Item	Round	Available	NA	NA	Rubber	0.8	-	-

  From: 283,688 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Screwdriver (DK-51~53)

  ENGINEER

  +/- 2-WAY 2-in-1.[Features]· 2-in-1, Phillips and flathead 2-way screwdriver bit.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.00 / No.1 / No.2	2.6 ～ 6	67 ～ 89	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 126,921 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Screwdriver Set DK-05 – 08【1-7 Pieces Per Package】

  ENGINEER

  Interchangeable screwdriver set.[Features]・ DK-05 and 06 have low-voltage test grip (AC80 to 300 V／DC100 to 250 V)・ If the tip of the screwdriver touches the target and the head of the handle is pressed with your finger, the neon tube built in will light up[Applications]・ It is convenient for repair and maintenance work

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-) / Box / Combination	No.00 / No.0 / No.1 / No.2 / No.3	3.5 ～ 5.5	-	Set Product	Round	NA	-	-	Resin	-	4 ～ 10	-

  From: 432,076 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Jack Screwdriver

  ENGINEER

  Wireless microphone jack and connectors can be attached and detached easily.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Other	-	-	75	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 73,952 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stubby Screwdriver（DST01/02）

  ENGINEER

  ROHS Compliant Stubby Screwdriver

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6.3	38	Single Item	Round	NA	NA	NA	Resin	0.9	-	-

  From: 76,458 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustment Screwdriver DA-48 – 52

  ENGINEER

  Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.[Features]· Uses tough zirconia-based fine ceramic bit.· For high frequency area adjustment with complete non-inductive properties.· Also ideal as a short-circuit prevention screwdriver for board protection.· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)· Pencil-type portable design with caps for ...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-) / Phillips (+)/Flathead(-)	Other	0.8 ～ 2.5	-	Single Item	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: 662,217 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustable Screwdriver (With Rotating Cap)

  ENGINEER

  Ideal for trimmer adjustment in a compact design ceramic adjustment screwdriver line.[Features]・ A high strength, long lifespan, completely non-induction high frequency adjustment screwdriver using zirconia fine-ceramics.・ Two types of adjustments are possible with the straight-slot tip and the hexagonal shaft core.・ The handle has a compact design and a rotating cap that is easy to use[Applications]・ Adjustment work of variable c...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	Other	0.9 ～ 2.5	15 ～ 18	Single Item	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: 287,031 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustment Screwdriver, Detachable DA-72 – 79

  ENGINEER

  Thin-shaft ceramic adjustment screwdriver that's ideal for trimmer adjustment of deep areas.[Features]· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).· Since the shaft portion and the handle can be detached, it is also possible to use it mounted on machines, et...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	Other	0.8 ～ 2.5	15 ～ 20	Single Item	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: 436,186 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustment Screwdriver Set DK-90

  ENGINEER

  Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.[Features]· Uses tough zirconia-based fine ceramic bit.· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).· Pencil-type portable desig...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	Other	0.8 ～ 2.5	-	Set Product	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: 2,192,627 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Pro Grip Screwdriver DG-01 – 04

  ENGINEER

  Anti-slip cushion grip screwdriver with outstanding tightening force.[Features]· The shaft is chrome-vanadium steel.· The tip has been black-point processed.[Applications]· For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2	5.5 ～ 6.3	76 ～ 80	Single Item	Round	Available	NA	NA	Rubber	0.7 ～ 0.9	-	-

  From: 228,538 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Soft Screwdriver Set

  ENGINEER

  A mini soft screwdriver set with a soft grip which fits well in the hand.[Features]· It is a soft grip which fits well in the hand.· The shaft is made of a special alloy steel used in the manufacturing industry, and has been hardened over the whole length.· The tip has been black-point processed.· It has a chrome plated finish.[Applications]· For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.00 / No.0	3 ～ 4	80	Set Product	Round	NA	NA	NA	Rubber	0.4 ～ 0.5	-	-

  From: 554,006 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Screwdriver Set DK-50

  ENGINEER

  +/- 2-WAY bit for 2-in-1 interchangeable screwdriver set.[Features]· +/- 2-WAY 2-in-1 bit.· 3-piece interchangeable screwdriver set.[Applications]· For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.00 / No.1 / No.2	2.6 ～ 6	67 ～ 89	Set Product	Round	NA	-	-	Resin	-	-	-

  From: 346,359 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver For Special Screw and For Hexalobular Screw

  ENGINEER

  A screwdriver that supports all types of special screw for mobile phones, PHS, radio sets, PC, home game machines, etc.[Features]· There is a protrusion at the center of the screw hole, making it suitable for tampering and theft prevention.· It is widely used in cordless telephones / radios / precision instruments, etc.[Applications]· For the maintenance of mobile phones, PHS, radio sets, PC, home game machines, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx	-	-	75 ～ 100	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 254,411 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver for Special Screw and for Line Recess Screw (for LR Screw)

  ENGINEER

  It supports special screws used in mobile phones, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx	-	-	75	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 307,085 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Strong Through Screwdriver

  ENGINEER

  [Features]· Loosens stripped screws, rusted screws and screws that are stuck by hammering. · Can be hit with a hammer. · Can also be turned and tightened using a wrench due to the 6.0 mm width across flat shaft.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6.35	102 ～ 152	Single Item	Round	-	Available	-	-	-	-	-

  From: 172,971 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Tip standards
Tip size / Phillips (+)
Tip size / flathead (-) blade width (mm) B1
Shaft length L (mm)
Single Product/Set Classification
Shaft type
Magnet
Shaft through
Bolster
Grip Type
Tip size / flathead (-) blade thickness (mm) B2
(Box/Hex/Ball-Point) Width Across Flats (mm)
(Box/Hex/Ball-Point) Width Across Flats (inch)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER
Product SeriesDòng sản phẩm	Miniature Screwdriver	Mini Soft Screw Driver DG-21 – 24	Electroscopic Screwdriver DKD-01/DKD-02	Screwdriver for Precision Special Screws DAP-01/DAP-02	LED Electrical Screwdriver DKD-03	Screwdriver Set for Special Screw	Standard Driver	Pro Use Screwdriver	Screwdriver for Special Screw and for Pentalobular Screw	Special Screw Bit Set DR-18	Micro Screwdriver DM	Twin Star DST-05	Nut Screwdriver DN	Long Grip Screwdriver DG-11 – 14	Replacement Screwdriver (DK-51~53)	Replacement Screwdriver Set DK-05 – 08【1-7 Pieces Per Package】	Jack Screwdriver	Stubby Screwdriver（DST01/02）	Ceramic Adjustment Screwdriver DA-48 – 52	Ceramic Adjustable Screwdriver (With Rotating Cap)	Ceramic Adjustment Screwdriver, Detachable DA-72 – 79	Ceramic Adjustment Screwdriver Set DK-90	Pro Grip Screwdriver DG-01 – 04	Mini Soft Screwdriver Set	Replacement Screwdriver Set DK-50	Screwdriver For Special Screw and For Hexalobular Screw	Screwdriver for Special Screw and for Line Recess Screw (for LR Screw)	Strong Through Screwdriver
From	13,260 VND-	138,293 VND-	185,228 VND	279,928 VND	226,961 VND	200,546 VND-	19,040 VND-	92,335 VND-	431,590 VND-	1,846,269 VND	66,849 VND	101,526 VND	58,140 VND-	283,688 VND-	126,921 VND-	432,076 VND-	73,952 VND	76,458 VND	662,217 VND-	287,031 VND-	436,186 VND-	2,192,627 VND	228,538 VND-	554,006 VND	346,359 VND	254,411 VND-	307,085 VND	172,971 VND-
Days to ShipSố ngày giao hàng	9 Day(s) or more	9 Day(s)	Same day	9 Day(s)	9 Day(s)	4 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	4 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	12 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)
Tip standards	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Flathead (-)	Torx / Other	Flathead (-)	Torx / Other	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Other	Combination	Flathead (-)	Phillips (+)/Flathead(-)	Box	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-) / Box / Combination	Other	Phillips (+) / Flathead (-)	Flathead (-) / Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-)	Torx	Torx	Phillips (+) / Flathead (-)
Tip size / Phillips (+)	No.000	No.00 / No.0	-	-	-	-	No.00 / No.0 / No.1 / No.2	No.00 / No.0 / No.1 / No.2	-	-	-	No.2	-	No.2	No.00 / No.1 / No.2	No.00 / No.0 / No.1 / No.2 / No.3	-	No.2	Other	Other	Other	Other	No.1 / No.2	No.00 / No.0	No.00 / No.1 / No.2	-	-	No.2
Tip size / flathead (-) blade width (mm) B1	1.6	3 ～ 4	-	-	3	-	2.6 ～ 5.5	3 ～ 5.5	-	-	-	6.3	-	6	2.6 ～ 6	3.5 ～ 5.5	-	6.3	0.8 ～ 2.5	0.9 ～ 2.5	0.8 ～ 2.5	0.8 ～ 2.5	5.5 ～ 6.3	3 ～ 4	2.6 ～ 6	-	-	6.35
Shaft length L (mm)	30	80	28	23	20	-	50 ～ 150	75 ～ 100	75 ～ 100	-	-	23	75 ～ 125	225 ～ 275	67 ～ 89	-	75	38	-	15 ～ 18	15 ～ 20	-	76 ～ 80	80	67 ～ 89	75 ～ 100	75	102 ～ 152
Single Product/Set Classification	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	Set Product	Set Product	Single Item	Single Item	Single Item
Shaft type	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round	Round
Magnet	NA	NA	NA	NA	NA	Available	NA	NA	NA	Available	-	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	-
Shaft through	NA	NA	NA	NA	NA	-	NA	NA	NA	-	-	-	NA	NA	NA	-	NA	NA	NA	NA	NA	NA	NA	NA	-	NA	NA	Available
Bolster	NA	NA	NA	NA	NA	-	NA	NA	NA	-	-	-	NA	NA	NA	-	NA	NA	NA	NA	NA	NA	NA	NA	-	NA	NA	-
Grip Type	Resin	Rubber	Resin	Rubber	Resin	-	Resin	Resin	Resin	-	-	Resin	Resin	Rubber	Resin	Resin	Resin	Resin	Resin	Resin	Resin	Resin	Rubber	Rubber	Resin	Resin	Resin	-
Tip size / flathead (-) blade thickness (mm) B2	0.3	0.4 ～ 0.5	-	-	0.4	-	0.35 ～ 0.7	0.35 ～ 0.7	-	-	-	-	-	0.8	-	-	-	0.9	0.35 ～ 0.7	0.35 ～ 0.7	0.35 ～ 0.7	0.35 ～ 0.7	0.7 ～ 0.9	0.4 ～ 0.5	-	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (mm)	-	-	-	-	-	-	-	-	-	-	-	-	4 ～ 12	-	-	4 ～ 10	-	-	-	-	-	-	-	-	-	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER
Product SeriesDòng sản phẩm	Miniature Screwdriver	Mini Soft Screw Driver DG-21 – 24	Electroscopic Screwdriver DKD-01/DKD-02	Screwdriver for Precision Special Screws DAP-01/DAP-02	LED Electrical Screwdriver DKD-03	Screwdriver Set for Special Screw	Standard Driver	Pro Use Screwdriver	Screwdriver for Special Screw and for Pentalobular Screw	Special Screw Bit Set DR-18	Micro Screwdriver DM	Twin Star DST-05	Nut Screwdriver DN	Long Grip Screwdriver DG-11 – 14	Replacement Screwdriver (DK-51~53)	Replacement Screwdriver Set DK-05 – 08【1-7 Pieces Per Package】	Jack Screwdriver	Stubby Screwdriver（DST01/02）	Ceramic Adjustment Screwdriver DA-48 – 52	Ceramic Adjustable Screwdriver (With Rotating Cap)	Ceramic Adjustment Screwdriver, Detachable DA-72 – 79	Ceramic Adjustment Screwdriver Set DK-90	Pro Grip Screwdriver DG-01 – 04	Mini Soft Screwdriver Set	Replacement Screwdriver Set DK-50	Screwdriver For Special Screw and For Hexalobular Screw	Screwdriver for Special Screw and for Line Recess Screw (for LR Screw)	Strong Through Screwdriver

Loading...Tải…