KANEMITSU V Belt Pulleys

• You can add up to 6 items per a category to the compare list. Compare

  

  NS Standard V Pulley A

  KANEMITSU

  Nominal diameter 2 to 24 inches, with 1 to 4 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotator.[Features]· A wide range of model configurations: 95 A type, 132 B types and 102 C types, with pitches ranging from 2° to 30° and 1 to 6 grooves.· High-performance, high-quality NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.· Dimensional precision to JIS reference standards, with thorough quality control.· Groove part shape and dimensions table.· Maximum speed: NS standard V-pulley is recommended to be of circumferential speed under 25 m/s specification.· Recommended minimum pulley diameter: A type 3° or greater, B type 5° or greater, and C type 8° or greater.

  From: 258,696 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SNS JIS V Pulley A

  KANEMITSU

  Nominal diameter ø67 to 710, with 1 to 3 runners available in wide selection, good balance measurements, and directly usable on high speed rotator.[Features]· SNS JIS V pulley is a new addition to the mechanical series, with 360 types standardized, rotation ratio, distance between shafts etc. can be freely selected.· Ingenuity has been applied to the shape design etc. to prevent damage to the shaft or bearing.· Shaft etc. can be preserved, useful for saving labor.· Can also be used for machines with heavy loads and shocks etc.· High-precision machining, for good transmission efficiency, and regular rotation ration is achieved.· As the SNS and JIS V-pulleys, on all balancing machine products, machine using aligned balance measurements, they have good quality high-precision and are directly usable on high-speed rotators.

  From: 371,953 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NS Standard V-Pulley C

  KANEMITSU

  Nominal diameter 4 to 30 inches, with 2 to 6 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable on high-speed rotator.

  From: 795,608 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STB synchro pulley L

  KANEMITSU

  JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type L. Teeth no. 36 (material: carbon steel), teeth no. 40 (material: exceeds FC200)

  From: 1,339,840 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NS Standard V-Pulley B

  KANEMITSU

  Nominal diameter 2 to 30 inches, with 1 to 5 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotation.[Features]· Extensive range of applications, with high level of model configuration, and safety for quality to satisfy user needs.· The NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.· Dimensional precision to JIS reference standards, with thorough quality control.

  From: 215,121 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STB Sheave 5V

  KANEMITSU

  Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200

  From: 2,925,921 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SNS JIS V Pulley B

  KANEMITSU

  Nominal diameter ø118 to 900, with 1 to 5 runners available in wide selection, good balance measurements, and directly usable on high-speed rotator.

  From: 740,228 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STB Sheave 3V

  KANEMITSU

  Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200

  From: 660,546 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STB synchro pulley H

  KANEMITSU

  JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type H, teeth no. 28 (carbon steel) teeth no. 30 (exceeds FC200 material)[Features]· Nominal diameter from 4 to 30 inches, 2 to 6 grooves for rich lineup, and dimensional precision to JIS reference standards, good balance measurements, can be used directly on high-speed rotator.

  From: 1,866,541 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SNS Power Sheave 3V

  KANEMITSU

  JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø67 to 630, groove no. 1 to 6. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (greater transmission capacity FC250)

  From: 459,746 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SNS Power Sheave 5V

  KANEMITSU

  JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø150 to 1000, groove no. 2 to 10. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (large transmission capacity FC250)[Features]· JIS standard sizes in addition to a wide range of intermediate sizing standardized, with free selection of rotation ratio and shaft distance etc., for easy design.· JIS B 1855 slim V-pulley dimensions adopted for interchangeability.· Material exceeding FC200 (large transmission capacity FC250) used, with various dimensions displaying 100% performance for high precision, vibration, and balance.· Compared with previous products (A.B.C.....shape), narrow width V belt (3W, 5V, 8V types), there are many advantages due to the very large transmission capacity of the belt, with high horsepower greatly reducing costs.· Due to the compactness of the pulley, it can be used for low speed horsepower not possible due to large sizes with conventional products, and it is now possible to change the chain and gear transmission.· Power sheave has enough strength to withstand.· Since release, it has been used by many, so can be adopted with confidence.· Band-power ACE, and power scrum are interchangeable even when used with groove guide wheels, and max wedge belt.

  From: 2,543,446 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KANEMITSU	KANEMITSU	KANEMITSU	KANEMITSU	KANEMITSU	KANEMITSU	KANEMITSU	KANEMITSU	KANEMITSU	KANEMITSU	KANEMITSU
Product SeriesDòng sản phẩm	NS Standard V Pulley A	SNS JIS V Pulley A	NS Standard V-Pulley C	STB synchro pulley L	NS Standard V-Pulley B	STB Sheave 5V	SNS JIS V Pulley B	STB Sheave 3V	STB synchro pulley H	SNS Power Sheave 3V	SNS Power Sheave 5V
From	258,696 VND-	371,953 VND-	795,608 VND-	1,339,840 VND-	215,121 VND-	2,925,921 VND-	740,228 VND-	660,546 VND-	1,866,541 VND-	459,746 VND-	2,543,446 VND-
Days to ShipSố ngày giao hàng	4 Day(s) or more	4 Day(s) or more	7 Day(s) or more	7 Day(s) or more	4 Day(s) or more	7 Day(s) or more	4 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more

Loading...Tải…