(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
MISUMI Carbide Radius End Mills（Machining Application：Curved surface）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
60 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
MISUMI
[Features]·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Non-Coated
- General Steel
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 20 0.1 ～ 3 4 ～ 60 2 ～ 4 40 ～ 125 general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 20 - Curved surface For High Hardness (Silicon Group) / Non-Coated radius Standard torsion (30-40°) ±0.02 Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide radius end mill, 2-flute / short model
MISUMI
Radius end mills are available at low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.1 ～ 3 3 ～ 30 2 50 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 4 ～ 12 - Curved surface For General Steels (AlCrN, etc.) radius Standard torsion (30-40°) ±0.02 From: 442,479 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide radius end mill, 4-flute / short model
MISUMI
The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.1 ～ 3 8 ～ 38 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 4 ～ 20 - Curved surface For General Steels (AlCrN, etc.) radius Standard torsion (30-40°) ±0.02 From: 574,958 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
MISUMI
[Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.3 ～ 1 4.5 ～ 18 3 40 ～ 65 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 12 - Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 From: 1,564,545 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]·Radius type of multi-function end mill·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping
- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 2 5 ～ 56 3 60 ～ 130 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 20 26 ～ 92 Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 4-flute, 45°, regular model
MISUMI
[Features]·Radius type of multi-function end mill·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 3 5 ～ 56 4 60 ～ 130 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 20 26 ～ 92 Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 2-flute / short model
MISUMI
[Features]·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 20 0.1 ～ 3 2 ～ 40 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 20 17 ～ 45 Curved surface For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
MISUMI
The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.2 ～ 1 5 ～ 36 3 40 ～ 80 Aluminum[◎] / Copper[○] / Resin[○] 4 ～ 12 23 ～ 50 Curved surface DLC radius Powerful Torsion (45°-60°) ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 20 0.813 ～ 2.607 8 ～ 40 4 50 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 20 - Curved surface For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) - From: 2,359,017 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
MISUMI
[Features]·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.75 ～ 3 1.2 ～ 5 4 60 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 12 7.5 ～ 24 Curved surface For High Hardness (Silicon Group) High-Feed Radius No torsion ±0.02 From: 1,321,408 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.5 ～ 1 4.5 ～ 18 3 60 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 12 14 ～ 68 Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.1 ～ 3 1.5 ～ 18 2 40 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 12 14 ～ 45 Curved surface For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 4-flute / short model
MISUMI
[Features]·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.1 ～ 3 2 ～ 24 4 40 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 12 17 ～ 45 Curved surface For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
MISUMI
[Features]·Multi-function long neck radius with high feed capability and excellent durability·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 4 0.2 ～ 1 0.8 ～ 3.2 3 45 ～ 70 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 6 6 ～ 30 Curved surface For High Hardness (Silicon Group) Long-Neck Radius Powerful Torsion (45°-60°) ±0.005 ～ ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
MISUMI
Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 5 ～ 22 0.5 ～ 2 9 ～ 33 3 80 ～ 200 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] 4 ～ 20 - Curved surface Non-Coated radius Powerful Torsion (45°-60°) ±0.02 From: 1,801,712 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· A tool with short blade length that suppresses chatter during machining
- Volume Discount
- High-Hardness Steel
- 3 Flutes
- SR
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 10 0.3 ～ 1 10 ～ 25 3 50 ～ 80 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 10 - Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±10 From: 26,499,735 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 12 0.813 ～ 2.438 8 ～ 24 3 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 12 - Curved surface For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) - From: 3,002,853 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 12 0.813 ～ 2.438 8 ～ 24 3 80 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 12 35 ～ 108 Curved surface For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) - From: 2,361,520 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 12 0.813 ～ 2.438 8 ～ 24 4 80 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 12 35 ～ 108 Curved surface For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) - From: 1,970,331 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type
MISUMI
A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 6 0.2 ～ 0.5 3 ～ 9 4 50 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 - Curved surface For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.005 From: 1,209,640 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
MISUMI
3-flute 45° helix radius that's resistant to chattering is available at an affordable price
- Volume Discount
- XAL
- General Steel
- 3 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0 ～ 16 0.2 ～ 2 16 ～ 48 3 60 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 6 ～ 16 - Curved surface For General Steels (AlCrN, etc.) radius Powerful Torsion (45°-60°) ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
MISUMI
4-Flute Radius for High-Efficiency and High-Speed Machining
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 12 0.2 ～ 2 18 ～ 38 4 60 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 6 ～ 12 - Curved surface For General Steels (AlCrN, etc.) radius Powerful Torsion (45°-60°) ±0.02 ～ 10 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.5 ～ 2 2 ～ 12 3 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 12 - Curved surface For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) ±0.015 From: 1,742,415 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.5 ～ 2 4 ～ 24 3 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 12 - Curved surface For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) ±0.015 From: 1,699,876 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
MISUMI
[Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.5 ～ 2 2 ～ 12 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 12 - Curved surface For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) ±0.015 From: 1,171,064 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
MISUMI
[Features]·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 20 0.5 ～ 3 4 ～ 40 4 50 ～ 130 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 20 - Curved surface For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) ±0.015 From: 1,588,109 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
MISUMI
Long neck type with interference prevention can be selected from a number of effective lengths
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 16 1 ～ 3 6 ～ 24 4 70 ～ 180 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 16 28 ～ 120 Curved surface For High Hardness (Silicon Group) Long-Neck Radius Powerful Torsion (45°-60°) ±0.015 From: 1,873,993 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model
MISUMI
[Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.3 ～ 1 4.5 ～ 18 4 40 ～ 65 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 12 - Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 From: 1,497,010 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type
MISUMI
[Features]·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.3 ～ 2 5 ～ 26 3 60 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 12 18 ～ 70 Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill·Long shank type ideal for deep cavity milling·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 22 0.2 ～ 2 4.5 ～ 30 4 80 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 20 10 ～ 18 Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 From: 2,204,293 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
MISUMI
[Features]·Radius type of multi-function end mill·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface while suppressing chattering
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.5 ～ 1 4.5 ～ 18 4 60 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 12 14 ～ 68 Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 4-flute, 45° spiral / short model
MISUMI
[Features]·Multi-function end mill radius type.·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 3 5 ～ 38 4 60 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 20 18 ～ 73 Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 2-flute stub model
MISUMI
[Features]·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.2 ～ 3 3 ～ 18 2 35 ～ 60 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 12 - Curved surface For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 From: 931,471 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 2-flute / regular model
MISUMI
[Features]·General purpose 2-flute end mill with regular flute length type with cutting edge radius·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 20 0.1 ～ 3 3 ～ 60 2 45 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 20 23 ～ 55 Curved surface For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type
MISUMI
[Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.3 ～ 1 3 ～ 18 4 35 ～ 60 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 12 - Curved surface For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.02 From: 1,131,235 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Radius End Mill 4-Flute / Stub Type
MISUMI
[Features]·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.1 ～ 3 1.5 ～ 18 4 40 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 12 14 ～ 45 Curved surface For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 4-flute / regular model
MISUMI
[Features]·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.1 ～ 3 3 ～ 36 4 45 ～ 85 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 12 23 ～ 55 Curved surface For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck radius end mill, 2-flute, long neck model
MISUMI
Long neck radius that can be used as a ball and allows a large pick feed
- Volume Discount
- TS
- General Steel
- 2 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.2 ～ 6 0.05 ～ 1 0.16 ～ 12 2 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 6 1 ～ 40 Curved surface For High Hardness (Silicon Group) Long-Neck Radius Standard torsion (30-40°) ±0.005 ～ ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck radius end mill, 4-flute / long neck model
MISUMI
[Features]·Radius (R) accuracy of ±5 µm (compared to the manufacturer measurements) enables high precision deep cavity milling·By adopting 4-flute shape, it is possible to process at high feed setting compared to 2-flute·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 6 0.05 ～ 1 1.5 ～ 12 4 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 6 3 ～ 40 Curved surface For High Hardness (Silicon Group) Long-Neck Radius Standard torsion (30-40°) ±0.005 ～ ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
MISUMI
[Features]·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.2 ～ 3 0.05 ～ 0.5 0.16 ～ 6 2 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 6 1 ～ 60 Curved surface For High Hardness (Silicon Group) Tapered neck radius Standard torsion (30-40°) ±0.005 ～ ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
MISUMI
By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.8 ～ 2 4.5 ～ 18 3 80 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 16 24 ～ 105 Curved surface For High Hardness (Silicon Group) Tapered neck radius Powerful Torsion (45°-60°) ±0.02 From: 1,765,979 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model
MISUMI
[Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Taper neck is effective in suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.8 ～ 2 4.5 ～ 18 4 80 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 16 24 ～ 105 Curved surface For High Hardness (Silicon Group) Tapered neck radius Powerful Torsion (45°-60°) ±0.02 From: 2,311,265 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 6 0.2 ～ 0.5 3 ～ 9 4 50 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 - Curved surface For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) ±0.005 From: 2,200,749 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·High helix angle end mill with radius for machining high hardness steel·High tool rigidity minimizes tool tilt during side milling·Machining of high hardness steel up to 65HRC is possible·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- Multi-Flutes （5 ~）
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 12 0.5 ～ 2 5 ～ 12 6 60 ～ 85 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 12 11 ～ 55 Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·High helix angle end mill with radius for machining high hardness steel·High tool rigidity minimizes tool tilt during side milling·Machining of high hardness steel up to 65HRC is possible·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- Multi-Flutes （5 ~）
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 6 ～ 12 0.5 12 ～ 24 6 60 ～ 100 general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 12 - Curved surface For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.02 From: 2,026,423 VND Days to Ship: Số ngày giao hàng: Same day
Same day
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product SeriesDòng sản phẩm | Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill | (Economy series) XAL series carbide radius end mill, 2-flute / short model | (Economy series) XAL series carbide radius end mill, 4-flute / short model | TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / regular model | TSC series carbide radius end mill, 4-flute, 45°, regular model | DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade | TSC series carbide radius end mill, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model | TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model | Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model | TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type | XAL series carbide radius end mill, 3-flute, 45° torsion / regular model | XAL series carbide radius end mill, 4-flute, 45° torsion / regular model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model | TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model | TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type | TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model | TSC series carbide radius end mill, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, 4-flute, 45° spiral / short model | TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type | TSC series carbide long neck radius end mill, 2-flute, long neck model | TSC series carbide long neck radius end mill, 4-flute / long neck model | TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model | TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model | TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model | ||||||||||||||
| From | - | 442,479 VND- | 574,958 VND- | 1,564,545 VND- | - | - | - | - | 2,359,017 VND- | 1,321,408 VND- | - | - | - | - | 1,801,712 VND- | 26,499,735 VND | 3,002,853 VND- | 2,361,520 VND- | 1,970,331 VND- | 1,209,640 VND- | - | - | 1,742,415 VND- | 1,699,876 VND- | 1,171,064 VND- | 1,588,109 VND- | 1,873,993 VND- | 1,497,010 VND- | - | 2,204,293 VND- | - | - | 931,471 VND- | - | 1,131,235 VND- | - | - | - | - | - | 1,765,979 VND- | 2,311,265 VND- | 2,200,749 VND- | - | 2,026,423 VND- |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Blade diameter (D)(φ) | 2 ～ 20 | 1 ～ 12 | 3 ～ 20 | 3 ～ 12 | 3 ～ 20 | 3 ～ 20 | 1 ～ 20 | 2 ～ 12 | 4 ～ 20 | 3 ～ 12 | 3 ～ 12 | 1 ～ 12 | 1 ～ 12 | 1 ～ 4 | 5 ～ 22 | 4 ～ 10 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 2 ～ 6 | 0 ～ 16 | 4 ～ 12 | 2 ～ 12 | 2 ～ 12 | 2 ～ 12 | 2 ～ 20 | 4 ～ 16 | 3 ～ 12 | 3 ～ 12 | 3 ～ 22 | 3 ～ 12 | 3 ～ 20 | 2 ～ 12 | 1 ～ 20 | 2 ～ 12 | 1 ～ 12 | 1 ～ 12 | 0.2 ～ 6 | 1 ～ 6 | 0.2 ～ 3 | 3 ～ 12 | 3 ～ 12 | 2 ～ 6 | 6 ～ 12 | 6 ～ 12 |
| R Size(mm) | 0.1 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.3 ～ 1 | 0.2 ～ 2 | 0.2 ～ 3 | 0.1 ～ 3 | 0.2 ～ 1 | 0.813 ～ 2.607 | 0.75 ～ 3 | 0.5 ～ 1 | 0.1 ～ 3 | 0.1 ～ 3 | 0.2 ～ 1 | 0.5 ～ 2 | 0.3 ～ 1 | 0.813 ～ 2.438 | 0.813 ～ 2.438 | 0.813 ～ 2.438 | 0.2 ～ 0.5 | 0.2 ～ 2 | 0.2 ～ 2 | 0.5 ～ 2 | 0.5 ～ 2 | 0.5 ～ 2 | 0.5 ～ 3 | 1 ～ 3 | 0.3 ～ 1 | 0.3 ～ 2 | 0.2 ～ 2 | 0.5 ～ 1 | 0.2 ～ 3 | 0.2 ～ 3 | 0.1 ～ 3 | 0.3 ～ 1 | 0.1 ～ 3 | 0.1 ～ 3 | 0.05 ～ 1 | 0.05 ～ 1 | 0.05 ～ 0.5 | 0.8 ～ 2 | 0.8 ～ 2 | 0.2 ～ 0.5 | 0.5 ～ 2 | 0.5 |
| Blade length (ℓ)(mm) | 4 ～ 60 | 3 ～ 30 | 8 ～ 38 | 4.5 ～ 18 | 5 ～ 56 | 5 ～ 56 | 2 ～ 40 | 5 ～ 36 | 8 ～ 40 | 1.2 ～ 5 | 4.5 ～ 18 | 1.5 ～ 18 | 2 ～ 24 | 0.8 ～ 3.2 | 9 ～ 33 | 10 ～ 25 | 8 ～ 24 | 8 ～ 24 | 8 ～ 24 | 3 ～ 9 | 16 ～ 48 | 18 ～ 38 | 2 ～ 12 | 4 ～ 24 | 2 ～ 12 | 4 ～ 40 | 6 ～ 24 | 4.5 ～ 18 | 5 ～ 26 | 4.5 ～ 30 | 4.5 ～ 18 | 5 ～ 38 | 3 ～ 18 | 3 ～ 60 | 3 ～ 18 | 1.5 ～ 18 | 3 ～ 36 | 0.16 ～ 12 | 1.5 ～ 12 | 0.16 ～ 6 | 4.5 ～ 18 | 4.5 ～ 18 | 3 ～ 9 | 5 ～ 12 | 12 ～ 24 |
| Number of flutes(sheet) | 2 ～ 4 | 2 | 4 | 3 | 3 | 4 | 2 | 3 | 4 | 4 | 3 | 2 | 4 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 3 | 4 | 3 | 3 | 4 | 4 | 4 | 4 | 3 | 4 | 4 | 4 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 2 | 3 | 4 | 4 | 6 | 6 |
| Overall Length (L)(mm) | 40 ～ 125 | 50 ～ 75 | 50 ～ 100 | 40 ～ 65 | 60 ～ 130 | 60 ～ 130 | 40 ～ 110 | 40 ～ 80 | 50 ～ 150 | 60 ～ 110 | 60 ～ 100 | 40 ～ 75 | 40 ～ 75 | 45 ～ 70 | 80 ～ 200 | 50 ～ 80 | 50 ～ 100 | 80 ～ 160 | 80 ～ 160 | 50 | 60 ～ 110 | 60 ～ 100 | 50 ～ 100 | 50 ～ 100 | 50 ～ 100 | 50 ～ 130 | 70 ～ 180 | 40 ～ 65 | 60 ～ 100 | 80 ～ 200 | 60 ～ 100 | 60 ～ 110 | 35 ～ 60 | 45 ～ 125 | 35 ～ 60 | 40 ～ 75 | 45 ～ 85 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 | 80 ～ 160 | 80 ～ 160 | 50 | 60 ～ 85 | 60 ～ 100 |
| work material | general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] |
| Shank diameter (d)(mm) | 4 ～ 20 | 4 ～ 12 | 4 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 20 | 4 ～ 10 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 | 6 ～ 16 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 16 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 16 | 6 ～ 16 | 6 | 6 ～ 12 | 6 ～ 12 |
| Underneck length (ℓ1)(mm) | - | - | - | - | 26 ～ 92 | 26 ～ 92 | 17 ～ 45 | 23 ～ 50 | - | 7.5 ～ 24 | 14 ～ 68 | 14 ～ 45 | 17 ～ 45 | 6 ～ 30 | - | - | - | 35 ～ 108 | 35 ～ 108 | - | - | - | - | - | - | - | 28 ～ 120 | - | 18 ～ 70 | 10 ～ 18 | 14 ～ 68 | 18 ～ 73 | - | 23 ～ 55 | - | 14 ～ 45 | 23 ～ 55 | 1 ～ 40 | 3 ～ 40 | 1 ～ 60 | 24 ～ 105 | 24 ～ 105 | - | 11 ～ 55 | - |
| Machining Application | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface |
| Coating | For High Hardness (Silicon Group) / Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Type | radius | radius | radius | radius | radius | radius | radius | radius | High-Feed Radius | High-Feed Radius | radius | radius | radius | Long-Neck Radius | radius | radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | radius | radius | radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | Long-Neck Radius | Tapered neck radius | Tapered neck radius | Tapered neck radius | High-Feed Radius | radius | radius |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | No torsion | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) |
| R Precision(μm) | ±0.02 | ±0.02 | ±0.02 | ±0.01 | ±0.01 | ±0.01 | ±0.01 ～ ±0.02 | ±0.02 | - | ±0.02 | ±0.01 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.005 ～ ±0.01 | ±0.02 | ±10 | - | - | - | ±0.005 | ±0.02 | ±0.02 ～ 10 | ±0.015 | ±0.015 | ±0.015 | ±0.015 | ±0.015 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 ～ ±0.02 | ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 | ±0.02 | ±0.02 | ±0.005 | ±0.02 | ±0.02 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
R Size(mm)
- R0
- 0.02
- R0.02
- 0.03
- 0.05
- R0.05
- 0.1
- R0.1
- 0.15
- R0.15
- 0.2
- R0.2
- 0.25
- R0.25
- 0.3
- R0.3
- 0.4
- 0.5
- R0.5
- 0.6
- 0.7
- 0.75
- 0.76
- 0.8
- 0.813
- 0.9
- 1
- R1
- R1.0
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- R1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- R2.0
- R2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- R2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- R3.0
- R3
- 3.05
- 3.2
- 3.5
- R3.5
- 4
- R4.0
- R4
- 5
- R5
- 6
- R6
- 6.35
- 6.5
- 8
[0.1-3/0.1mm Unit(s)]
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.45
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.25
- 1.4
- 1.44
- 1.5
- 1.6
- 1.75
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 3.8
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy