MISUMI Chamfer, V-Grooves（work material：Stainless Steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]·Ideal for chamfering. Can also be used as a deburring tool·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	Available	TS	-

  From: 1,222,151 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]·Easy high-quality processing of corner radius·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	Stainless Steel[○]	Single blade	NA	Available	TS	0.1 ～ 5

  From: 1,209,848 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill 2-Flute

  MISUMI

  [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	AlCrN	-

  From: 935,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  MISUMI

  [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	Available	Available	AlCrN	-

  From: 1,260,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]·Ideal for chamfering and V-groove·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 16	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	NA	Available	TS	-

  From: 1,763,476 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide inner R-cutter, 2-flute

  MISUMI

  Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

  • Volume Discount

  • Non-Coated
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	Stainless Steel[○]	Single blade	NA	NA	-	0.15 ～ 5

  From: 1,473,421 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • Volume Discount

  • TS
  • SUS
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[◎]	Single blade	NA	Available	TS	-

  From: 1,595,616 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • Volume Discount

  • TiCN
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Powder high-speed steel	10 ～ 25	60 ～ 120	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	Available	-	-

  From: 1,373,122 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

  MISUMI

  [Features]・The popular high hardness steel chamfer end mill is even more affordable.・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)・High-efficiency machining is possible by adopting a 6-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	TS	-

  From: 1,227,500 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Stainless Steel[○]	Single blade	Available	Available	TS	-

  From: 2,000,567 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	TS	-

  From: 2,066,669 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).·Peripheral flutes enable inclined, contour and helical cutting·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type·With helix angle on the peripheral flutes·Can also be used as a deburring tool·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	Available	TS	-

  From: 1,891,926 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

  MISUMI

  [Features]・MISUMI's original inner radius cutter specialized for machining high hardness steel.・Ideal for high hardness steel inner radius machining up to 65 HRC.・High-efficiency machining is possible by adopting a 4-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	Round Chamfer	Stainless Steel[○]	Single blade	NA	Available	AlCrN	0.5 ～ 3

  From: 1,332,500 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  MISUMI

  [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	Available	Available	AlCrN	-

  From: 1,200,000 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  MISUMI

  [Features]・Machining from positioning to chamfering with a single tool.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 10	90	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Stainless Steel[○]	Single blade	NA	Available	AlCrN	-

  From: 1,523,836 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Inner Radius Cutter, 2-Flute

  MISUMI

  [Features]・An essential item for corner rounding.

  • Volume Discount

  CAD ：

  2D / 3D

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	-	-	-	Stainless Steel[○]	Single blade	NA	Available	AlCrN	-

  From: 848,514 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	TS coated carbide chamfering end mill, 2-flute / short model	TS coated carbide inner R-cutter, 2-flute	XAL Series Carbide Chamfer End Mill 2-Flute	XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type	TS coated carbide chamfer, V grooving end mill, 2-flute	Carbide inner R-cutter, 2-flute	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short	XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS coated carbide chamfering end mill, 2-flute / 15° spiral	TS coated carbide chamfering end mill, 3-flute / short model	XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type	XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type	XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle	XAL Series Carbide Inner Radius Cutter, 2-Flute
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	1,222,151 VND-	1,209,848 VND-	935,000 VND-	1,260,000 VND-	1,763,476 VND-	1,473,421 VND-	1,595,616 VND-	1,373,122 VND-	1,227,500 VND-	2,000,567 VND-	2,066,669 VND-	1,891,926 VND-	1,332,500 VND-	1,200,000 VND-	1,523,836 VND-	848,514 VND-
Days to ShipSố ngày giao hàng	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes			TS General Steel 2 Flutes	Non-Coated General Steel 2 Flutes	TS SUS 2 Flutes	TiCN 2 Flutes S (Short)		TS General Steel 2 Flutes	TS General Steel 2 Flutes	TS General Steel 3 Flutes S (Short)
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Tool Diameter (D)(mm)	3 ～ 12	-	3 ～ 16	3 ～ 12	3 ～ 16	-	3 ～ 12	10 ～ 25	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	-	3 ～ 12	3 ～ 10	-
Tip angle (θ)	60 ～ 120	-	60 ～ 120	90	60 ～ 120	-	90	60 ～ 120	90	90	90	90	-	-	90	-
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	-
work material	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	Available	NA	NA	Available	NA	NA	NA	Available	NA	Available	NA	Available	NA	Available	NA	NA
Coating Y/N	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	TS	TS	AlCrN	AlCrN	TS	-	TS	-	TS	TS	TS	TS	AlCrN	AlCrN	AlCrN	AlCrN
R Size (R)(mm)	-	0.1 ～ 5	-	-	-	0.15 ～ 5	-	-	-	-	-	-	0.5 ～ 3	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	TS coated carbide chamfering end mill, 2-flute / short model	TS coated carbide inner R-cutter, 2-flute	XAL Series Carbide Chamfer End Mill 2-Flute	XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type	TS coated carbide chamfer, V grooving end mill, 2-flute	Carbide inner R-cutter, 2-flute	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short	XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS coated carbide chamfering end mill, 2-flute / 15° spiral	TS coated carbide chamfering end mill, 3-flute / short model	XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type	XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type	XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle	XAL Series Carbide Inner Radius Cutter, 2-Flute

Loading...Tải…