What are the different types of flexible Shaft Couplings?

There are several types of flexible Shaft Couplings, including beam, bellows, jaw, Oldham, disc, diaphragm, and gear couplings. Each type has unique features and benefits that make them suitable for different applications and environments. Flexible Shaft Couplings are used to connect two shafts and allow for misalignment while transmitting torque between them.

What factors should be considered when selecting a flexible coupling?

The factor for selecting a flexible coupling, there are several factors that should be considered, including the required torque capacity, misalignment capability, operating speed, and environmental factors such as temperature and humidity. Other considerations include the required degree of axial and radial stiffness, the space available for the coupling, and the type of equipment being connected. It is also important to consider the potential for wear and tear, maintenance requirements, and the cost of the coupling.

How is a flexible coupling installed and maintained?

Shaft Couplings are installed by aligning the shafts and tightening the screws or bolts. Maintenance involves regular inspections for signs of wear, damage, or misalignment. Lubrication is important to prevent excessive wear and reduce friction. Cleaning and tightening of bolts and screws are also necessary to ensure proper operation.

What is the difference between a flexible coupling and a rigid coupling?

A flexible coupling allows for some misalignment between two connected shafts while transmitting torque, while a rigid coupling does not allow for any misalignment. Flexible couplings are designed to absorb shock and vibration, which can help reduce wear and tear on connected equipment. Rigid couplings, on the other hand, are used in applications where precise alignment between shafts is critical, such as in high-speed rotating equipment or precision machinery.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Quote /Order Báo giá /
Đặt hàng

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

Start chat

Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

NABEYA BI-TECH Flexible Shaft Couplings（Allowable Misalignment：Eccentricity）

NABEYA BI-TECH offers products Flexible Shaft Couplings specified by Allowable Misalignment Eccentricity from Automation Components product category. There are a total of 22 items. Search and select detailed specifications of parts for your machine with free CAD download. NABEYA BI-TECH products are avail

Show More Detail Show More Detail

Type	Slit Disc Oldham Jaw Bellows Rigid Others Vibration Damping Rubber Type
Brand	(52) (16) ADVANCED (11) COUP-LINE (1) ISEL (2) JIT COUPLING (0) KASCO (0) KAYSEVEN (2) KOYO ELECTRONIC (1) MIGHTY (5) MIKI PULLEY (12) MITSUBOSHI BELTING (0) NABEYA BI-TECH (22) NIHON MINIATURE (8) ORIENTAL MOTOR (1) SAKAI MANUFACTURING (11) SUNGIL (26)
Filter By	All Sale Items
CAD	2D 3D
Days to Ship	All Same day 1 Day(s) or Less 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less Others

22 itemsMặt hàng

Sort By

: 30; 45; 60

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Jaw	3 ～ 45	3 ～ 45	14 ～ 95	22 ～ 126	Standard / Servo Motor / Stepping Motor	0.05~1.00 ～ 100 < 500	High Torque ～ Vibration Insulation	Eccentricity	4001~10000 ～ 10001~78000	Aluminum	0.7 ～ 450	1	-	Coupling Main Body	0.02~0.2	6000 ～ 45000	Polyurethane	-	-

From: 535,256 VND
Days to Ship: Số ngày giao hàng: Same day or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Slit	2 ～ 35	2 ～ 35	8 ～ 63	14 ～ 90	Standard / Stepping Motor	0.05~1.00 ～ 20.01~50.00	High Torque ～ No Backlash	Eccentricity	4001~10000 ～ 10001~78000	Stainless Steel / Aluminum	0.1 ～ 35	2	0.1 ～ 0.2	Coupling Main Body	0.02~0.2	10000 ～ 78000	-	-	-

From: 610,224 VND
Days to Ship: Số ngày giao hàng: Same day or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 42	3 ～ 42	12 ～ 70	15 ～ 68.6	Standard	5.01~10.00 ～ 100 < 500	High Torque ～ High Torsional Rigidity	Eccentricity	1001~2000	Steel	5.4 ～ 352	2	0.3 ～ 1.4	Coupling Main Body	0.21~0.40 ～ 1.1~3.0	2000	-	-	-

From: 550,438 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Bellows	3 ～ 35	6 ～ 35	16.5 ～ 99	31.5 ～ 100	Servo Motor / Stepping Motor	0.05~1.00 ～ 50.01~100.00	High Torque ～ No Backlash	Eccentricity	4001~10000 ～ 10001~78000	-	0.9 ～ 270	2	0.1 ～ 0.2	Coupling Main Body	0.02~0.2	8000 ～ 20000	-	-	-

From: 3,901,815 VND
Days to Ship: Số ngày giao hàng: 9 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Slit	5 ～ 22	5 ～ 22	16 ～ 44	17.4 ～ 45	Standard / Servo Motor / Stepping Motor	0.05~1.00 ～ 5.01~10.00	High Torque ～ No Backlash	Eccentricity	10001~78000	Aluminum	0.5 ～ 9	0.5	0.05	Coupling Main Body	0.02~0.2	14000 ～ 39000	-	-	-

From: 760,978 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Disc	3 ～ 50	3 ～ 50	15 ～ 104	22 ～ 104.4	Standard / Servo Motor / Stepping Motor	0.05~1.00 ～ 100 < 500	High Torque ～ No Backlash	Eccentricity	4001~10000 ～ 10001~78000	Stainless Steel / Aluminum	0.6 ～ 200	1 ～ 2	0.05 ～ 0.5	Coupling Main Body	0.02~0.2 ～ 0.41~1.0	6000 ～ 42000	-	Stainless Steel	-

From: 1,191,530 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Disc	4 ～ 30	4 ～ 30	19 ～ 63	27 ～ 61	Standard / Servo Motor / Stepping Motor	0.05~1.00 ～ 10.01~20.00	No Backlash	Eccentricity	4001~10000 ～ 10001~78000	Aluminum	0.7 ～ 12.5	1.5	0.12 ～ 0.15	Coupling Main Body	0.02~0.2	10000 ～ 33000	-	Stainless Steel	-

From: 1,233,903 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	1 ～ 38	1 ～ 38	6 ～ 68	8.4 ～ 77	Standard / Stepping Motor	0.05~1.00 ～ 100 < 500	High Torque	Eccentricity	4001~10000 ～ 78001~	Aluminum	0.4 ～ 160	3	0.5 ～ 4.5	Coupling Main Body	0.41~1.0 ～ 3.1~5.0	9000 ～ 100000	Polyacetal	-	-

From: 282,158 VND
Special Price
Days to Ship: Số ngày giao hàng: Same day or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Slit	3 ～ 20	3 ～ 20	15 ～ 40	18 ～ 40	Servo Motor / Stepping Motor	0.05~1.00 ～ 1.01~3.00	High Torque ～ Vibration Insulation	Eccentricity	10001~78000	Aluminum	0.3 ～ 6	1	0.2	Coupling Main Body	0.02~0.2	15000 ～ 42000	-	-	-

From: 1,307,310 VND
Days to Ship: Số ngày giao hàng: Same day or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Vibration Damping Rubber Type	3 ～ 28	3 ～ 28	15 ～ 56	18 ～ 60	Standard / Servo Motor / Stepping Motor	0.05~1.00 ～ 20.01~50.00	High Torque ～ Vibration Insulation	Eccentricity	10001~78000	Aluminum	0.5 ～ 35	1.5	0.15 ～ 0.2	Coupling Main Body	0.02~0.2	11000 ～ 42000	Others	-	-

From: 693,871 VND
Days to Ship: Số ngày giao hàng: Same day or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Slit	5 ～ 30	5 ～ 30	25 ～ 63	31 ～ 90	Stepping Motor	1.01~3.00 ～ 20.01~50.00	Clean Environment ～ Vacuum Environment	Eccentricity	4001~10000 ～ 10001~78000	-	2 ～ 35	2	0.15 ～ 0.2	Coupling Main Body	0.02~0.2	10000 ～ 25000	-	-	-

From: 3,962,325 VND
Days to Ship: Số ngày giao hàng: 14 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Jaw	10 ～ 28	10 ～ 28	27.3 ～ 53.6	43.4 ～ 63.8	Standard	1.01~3.00 ～ 20.01~50.00	High Torque ～ Vibration Insulation	Eccentricity	100~ 300 ～ 10001~78000	Stainless Steel / Steel	2.1 ～ 37.3	0.5 ～ 1	0.25 ～ 0.38	Coupling Main Body	0.21~0.40	250 ～ 18000	Polyurethane / Aluminum Bronze / Others	-	-

From: 478,430 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Disc	4 ～ 30	4 ～ 30	19 ～ 63	20 ～ 46	Standard / Servo Motor / Stepping Motor	0.05~1.00 ～ 10.01~20.00	No Backlash	Eccentricity	4001~10000 ～ 10001~78000	Aluminum	0.7 ～ 12.5	0.7	0.02	Coupling Main Body	0.02~0.2	10000 ～ 33000	-	Stainless Steel	-

From: 1,032,777 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 25	3 ～ 25	16 ～ 63	18 ～ 70.6	Standard / Stepping Motor	0.05~1.00 ～ 20.01~50.00	-	Eccentricity	4001~10000 ～ 10001~78000	Aluminum	0.7 ～ 36	3	1 ～ 4	Coupling Main Body	0.41~1.0 ～ 3.1~5.0	10000 ～ 39000	Polyacetal	-	-

From: 399,980 VND
Days to Ship: Số ngày giao hàng: Same day or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Bellows	3 ～ 16	3 ～ 16	12 ～ 32	23.5 ～ 42	Stepping Motor	0.05~1.00 ～ 1.01~3.00	No Backlash	Eccentricity	10001~78000	Stainless Steel / Aluminum	0.3 ～ 3	1.5 ～ 2	0.1 ～ 0.2	Coupling Main Body	0.02~0.2	19000 ～ 52000	-	-	Stainless Steel / Phosphor Bronze

From: 537,938 VND
Days to Ship: Số ngày giao hàng: Same day or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	1 ～ 14	1 ～ 14	8 ～ 32	12.7 ～ 33.3	Standard / Stepping Motor	0.05~1.00 ～ 1.01~3.00	-	Eccentricity	10001~78000	Aluminum	0.08 ～ 2.8	2	0.5 ～ 2	Coupling Main Body	0.41~1.0 ～ 1.1~3.0	19000 ～ 78000	Polyacetal	-	-

From: 707,000 VND
Days to Ship: Số ngày giao hàng: 6 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Jaw	18 ～ 28	18 ～ 28	69.9	67.1 ～ 76.2	Standard	20.01~50.00	High Torque ～ Vibration Insulation	Eccentricity	4001~10000	-	38	2	0.7	Coupling Main Body	0.41~1.0	9200	Polyurethane	-	-

From: 3,792,913 VND
Days to Ship: Số ngày giao hàng: 9 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	3 ～ 15	3 ～ 15	16 ～ 32	27 ～ 48	Standard	0.05~1.00 ～ 1.01~3.00	Vibration Insulation	Eccentricity	10001~78000	Alloy	0.5 ～ 3	2	0.2	Coupling Main Body	0.02~0.2	19000 ～ 39000	Polyurethane	-	-

From: 340,063 VND
Days to Ship: Số ngày giao hàng: Same day or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	5 ～ 14	5 ～ 14	19 ～ 31.7	22.1 ～ 33.3	Standard / Stepping Motor	0.05~1.00 ～ 1.01~3.00	Clean Environment ～ Vibration Insulation	Eccentricity	1001~2000	Stainless Steel	0.4 ～ 2.2	2	1.3 ～ 2	Coupling Main Body	1.1~3.0	900	Vespel	-	-

From: 6,842,261 VND
Days to Ship: Số ngày giao hàng: 9 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	-	-	53 ～ 161	52 ～ 129	Standard	5.01~10.00 ～ 50.01~100.00	Vibration Insulation	Eccentricity	2001~4000 ～ 4001~10000	-	6.9 ～ 210	1	0.25 ～ 0.64	Coupling Main Body	0.21~0.40 ～ 0.41~1.0	3750 ～ 9200	-	-	-

From: 621,425 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Oldham	5 ～ 14	5 ～ 14	-	22.1 ～ 33.3	Standard / Stepping Motor	0.05~1.00 ～ 1.01~3.00	Clean Environment ～ Vacuum Environment	Eccentricity	10001~78000	Aluminum	0.7 ～ 2.8	2	1.3 ～ 2	Coupling Main Body	1.1~3.0	19000 ～ 31000	PEEK	-	-

From: 2,028,985 VND
Days to Ship: Số ngày giao hàng: 8 Day(s) or more

Type	Shaft Bore Dia. (machined) D1(Ø)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Application	Allowable Torque Range(N•m)	Features	Allowable Misalignment	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Allowable Angular Misalignment(deg)	Allowable Lateral Misalignment(mm)	Product Category	Allowable Lateral Misalignment Range(mm)	Max. Rotational Speed(r/min)	Buffer Material	Disc Material	Bellows Material
Slit	6 ～ 15	8 ～ 15	25 ～ 36	25 ～ 35	Standard	0.05~1.00 ～ 1.01~3.00	Clean Environment ～ Vacuum Environment	Eccentricity	10001~78000	Plastic	0.7 ～ 1.5	0.5	0.05	Coupling Main Body	0.02~0.2	17000 ～ 25000	-	-	-

From: 2,099,316 VND
Days to Ship: Số ngày giao hàng: 9 Day(s) or more


BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Type
Shaft Bore Dia. (machined) D1(Ø)
Shaft Bore Dia. (machined) D2(Ø)
Outer Dia. A(Ø)
Overall Length W(mm)
Application
Allowable Torque Range(N•m)
Features
Allowable Misalignment
Max. Rotational Speed Range(r/min)
Body Material
Allowable Torque(N•m)
Allowable Angular Misalignment(deg)
Allowable Lateral Misalignment(mm)
Product Category
Allowable Lateral Misalignment Range(mm)
Max. Rotational Speed(r/min)
Buffer Material
Disc Material
Bellows Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH
Product SeriesDòng sản phẩm	MJT Flexible Coupling Disk Type	MST/MSTS Flexible Coupling Slit Type	MOM Flexible Coupling - Oldham Type	Couplicon Bellows Flexible Coupling MKM	MSX Flexible Coupling - Slit Type	XBW/XBWS Flexible Coupling - Disk Type	MDW Flexible Coupling Disk Type	MOR Flexible Coupling - Oldham Type	XUT Flexible Coupling - Cross Joint Type	XGT/XGL/XGS Flexible Coupling - High-Damping Capacity Rubber Type	XSTS/XWSS Clean, Vacuum, Heat-Resistance Support Coupling - Slit Type (SUS316L)	L/SS Flexible Coupling Joe - Max Standard Type	MDS Flexible Coupling Single Disk Type	MOL Flexible Coupling - Oldham Type	MFB Flexible Coupling - Bellows Type	MOS Flexible Coupling - Oldham Type	LS/LSS Flexible Coupling - JawMax In-Shear Type	MSF Flexible Coupling-Serration Type	MOHS-C Clean, Vacuum, Heat-Resistance Support Coupling - Oldham Type (Vespel) - Clamping Type	SURE-FLEX	MOP Clean, Vacuum, Heat-Resistance Support Coupling - Oldham Type (PEEK)	MSXP-C Clean, Vacuum, Heat-Resistance Support Coupling - Slit Type (PEEK) - Clamping Type
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	535,256 VND-	610,224 VND-	550,438 VND-	3,901,815 VND-	760,978 VND-	1,191,530 VND-	1,233,903 VND-	282,158 VND Special Price On Sale Till 31/03/2025	1,307,310 VND-	693,871 VND-	3,962,325 VND-	478,430 VND-	1,032,777 VND-	399,980 VND-	537,938 VND-	707,000 VND-	3,792,913 VND-	340,063 VND-	6,842,261 VND-	621,425 VND-	2,028,985 VND-	2,099,316 VND-
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	Same day or more	14 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	9 Day(s) or more	Same day or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more
Type	Jaw	Slit	Oldham	Bellows	Slit	Disc	Disc	Oldham	Slit	Vibration Damping Rubber Type	Slit	Jaw	Disc	Oldham	Bellows	Oldham	Jaw	Oldham	Oldham	Oldham	Oldham	Slit
Shaft Bore Dia. (machined) D1(Ø)	3 ～ 45	2 ～ 35	3 ～ 42	3 ～ 35	5 ～ 22	3 ～ 50	4 ～ 30	1 ～ 38	3 ～ 20	3 ～ 28	5 ～ 30	10 ～ 28	4 ～ 30	3 ～ 25	3 ～ 16	1 ～ 14	18 ～ 28	3 ～ 15	5 ～ 14	-	5 ～ 14	6 ～ 15
Shaft Bore Dia. (machined) D2(Ø)	3 ～ 45	2 ～ 35	3 ～ 42	6 ～ 35	5 ～ 22	3 ～ 50	4 ～ 30	1 ～ 38	3 ～ 20	3 ～ 28	5 ～ 30	10 ～ 28	4 ～ 30	3 ～ 25	3 ～ 16	1 ～ 14	18 ～ 28	3 ～ 15	5 ～ 14	-	5 ～ 14	8 ～ 15
Outer Dia. A(Ø)	14 ～ 95	8 ～ 63	12 ～ 70	16.5 ～ 99	16 ～ 44	15 ～ 104	19 ～ 63	6 ～ 68	15 ～ 40	15 ～ 56	25 ～ 63	27.3 ～ 53.6	19 ～ 63	16 ～ 63	12 ～ 32	8 ～ 32	69.9	16 ～ 32	19 ～ 31.7	53 ～ 161	-	25 ～ 36
Overall Length W(mm)	22 ～ 126	14 ～ 90	15 ～ 68.6	31.5 ～ 100	17.4 ～ 45	22 ～ 104.4	27 ～ 61	8.4 ～ 77	18 ～ 40	18 ～ 60	31 ～ 90	43.4 ～ 63.8	20 ～ 46	18 ～ 70.6	23.5 ～ 42	12.7 ～ 33.3	67.1 ～ 76.2	27 ～ 48	22.1 ～ 33.3	52 ～ 129	22.1 ～ 33.3	25 ～ 35
Application	Standard / Servo Motor / Stepping Motor	Standard / Stepping Motor	Standard	Servo Motor / Stepping Motor	Standard / Servo Motor / Stepping Motor	Standard / Servo Motor / Stepping Motor	Standard / Servo Motor / Stepping Motor	Standard / Stepping Motor	Servo Motor / Stepping Motor	Standard / Servo Motor / Stepping Motor	Stepping Motor	Standard	Standard / Servo Motor / Stepping Motor	Standard / Stepping Motor	Stepping Motor	Standard / Stepping Motor	Standard	Standard	Standard / Stepping Motor	Standard	Standard / Stepping Motor	Standard
Allowable Torque Range(N•m)	0.05~1.00 ～ 100 < 500	0.05~1.00 ～ 20.01~50.00	5.01~10.00 ～ 100 < 500	0.05~1.00 ～ 50.01~100.00	0.05~1.00 ～ 5.01~10.00	0.05~1.00 ～ 100 < 500	0.05~1.00 ～ 10.01~20.00	0.05~1.00 ～ 100 < 500	0.05~1.00 ～ 1.01~3.00	0.05~1.00 ～ 20.01~50.00	1.01~3.00 ～ 20.01~50.00	1.01~3.00 ～ 20.01~50.00	0.05~1.00 ～ 10.01~20.00	0.05~1.00 ～ 20.01~50.00	0.05~1.00 ～ 1.01~3.00	0.05~1.00 ～ 1.01~3.00	20.01~50.00	0.05~1.00 ～ 1.01~3.00	0.05~1.00 ～ 1.01~3.00	5.01~10.00 ～ 50.01~100.00	0.05~1.00 ～ 1.01~3.00	0.05~1.00 ～ 1.01~3.00
Features	High Torque ～ Vibration Insulation	High Torque ～ No Backlash	High Torque ～ High Torsional Rigidity	High Torque ～ No Backlash	High Torque ～ No Backlash	High Torque ～ No Backlash	No Backlash	High Torque	High Torque ～ Vibration Insulation	High Torque ～ Vibration Insulation	Clean Environment ～ Vacuum Environment	High Torque ～ Vibration Insulation	No Backlash	-	No Backlash	-	High Torque ～ Vibration Insulation	Vibration Insulation	Clean Environment ～ Vibration Insulation	Vibration Insulation	Clean Environment ～ Vacuum Environment	Clean Environment ～ Vacuum Environment
Allowable Misalignment	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity	Eccentricity
Max. Rotational Speed Range(r/min)	4001~10000 ～ 10001~78000	4001~10000 ～ 10001~78000	1001~2000	4001~10000 ～ 10001~78000	10001~78000	4001~10000 ～ 10001~78000	4001~10000 ～ 10001~78000	4001~10000 ～ 78001~	10001~78000	10001~78000	4001~10000 ～ 10001~78000	100~ 300 ～ 10001~78000	4001~10000 ～ 10001~78000	4001~10000 ～ 10001~78000	10001~78000	10001~78000	4001~10000	10001~78000	1001~2000	2001~4000 ～ 4001~10000	10001~78000	10001~78000
Body Material	Aluminum	Stainless Steel / Aluminum	Steel	-	Aluminum	Stainless Steel / Aluminum	Aluminum	Aluminum	Aluminum	Aluminum	-	Stainless Steel / Steel	Aluminum	Aluminum	Stainless Steel / Aluminum	Aluminum	-	Alloy	Stainless Steel	-	Aluminum	Plastic
Allowable Torque(N•m)	0.7 ～ 450	0.1 ～ 35	5.4 ～ 352	0.9 ～ 270	0.5 ～ 9	0.6 ～ 200	0.7 ～ 12.5	0.4 ～ 160	0.3 ～ 6	0.5 ～ 35	2 ～ 35	2.1 ～ 37.3	0.7 ～ 12.5	0.7 ～ 36	0.3 ～ 3	0.08 ～ 2.8	38	0.5 ～ 3	0.4 ～ 2.2	6.9 ～ 210	0.7 ～ 2.8	0.7 ～ 1.5
Allowable Angular Misalignment(deg)	1	2	2	2	0.5	1 ～ 2	1.5	3	1	1.5	2	0.5 ～ 1	0.7	3	1.5 ～ 2	2	2	2	2	1	2	0.5
Allowable Lateral Misalignment(mm)	-	0.1 ～ 0.2	0.3 ～ 1.4	0.1 ～ 0.2	0.05	0.05 ～ 0.5	0.12 ～ 0.15	0.5 ～ 4.5	0.2	0.15 ～ 0.2	0.15 ～ 0.2	0.25 ～ 0.38	0.02	1 ～ 4	0.1 ～ 0.2	0.5 ～ 2	0.7	0.2	1.3 ～ 2	0.25 ～ 0.64	1.3 ～ 2	0.05
Product Category	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body	Coupling Main Body
Allowable Lateral Misalignment Range(mm)	0.02~0.2	0.02~0.2	0.21~0.40 ～ 1.1~3.0	0.02~0.2	0.02~0.2	0.02~0.2 ～ 0.41~1.0	0.02~0.2	0.41~1.0 ～ 3.1~5.0	0.02~0.2	0.02~0.2	0.02~0.2	0.21~0.40	0.02~0.2	0.41~1.0 ～ 3.1~5.0	0.02~0.2	0.41~1.0 ～ 1.1~3.0	0.41~1.0	0.02~0.2	1.1~3.0	0.21~0.40 ～ 0.41~1.0	1.1~3.0	0.02~0.2
Max. Rotational Speed(r/min)	6000 ～ 45000	10000 ～ 78000	2000	8000 ～ 20000	14000 ～ 39000	6000 ～ 42000	10000 ～ 33000	9000 ～ 100000	15000 ～ 42000	11000 ～ 42000	10000 ～ 25000	250 ～ 18000	10000 ～ 33000	10000 ～ 39000	19000 ～ 52000	19000 ～ 78000	9200	19000 ～ 39000	900	3750 ～ 9200	19000 ～ 31000	17000 ～ 25000
Buffer Material	Polyurethane	-	-	-	-	-	-	Polyacetal	-	Others	-	Polyurethane / Aluminum Bronze / Others	-	Polyacetal	-	Polyacetal	Polyurethane	Polyurethane	Vespel	-	PEEK	-
Disc Material	-	-	-	-	-	Stainless Steel	Stainless Steel	-	-	-	-	-	Stainless Steel	-	-	-	-	-	-	-	-	-
Bellows Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Stainless Steel / Phosphor Bronze	-	-	-	-	-	-	-


BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH	NABEYA BI-TECH
Product SeriesDòng sản phẩm	MJT Flexible Coupling Disk Type	MST/MSTS Flexible Coupling Slit Type	MOM Flexible Coupling - Oldham Type	Couplicon Bellows Flexible Coupling MKM	MSX Flexible Coupling - Slit Type	XBW/XBWS Flexible Coupling - Disk Type	MDW Flexible Coupling Disk Type	MOR Flexible Coupling - Oldham Type	XUT Flexible Coupling - Cross Joint Type	XGT/XGL/XGS Flexible Coupling - High-Damping Capacity Rubber Type	XSTS/XWSS Clean, Vacuum, Heat-Resistance Support Coupling - Slit Type (SUS316L)	L/SS Flexible Coupling Joe - Max Standard Type	MDS Flexible Coupling Single Disk Type	MOL Flexible Coupling - Oldham Type	MFB Flexible Coupling - Bellows Type	MOS Flexible Coupling - Oldham Type	LS/LSS Flexible Coupling - JawMax In-Shear Type	MSF Flexible Coupling-Serration Type	MOHS-C Clean, Vacuum, Heat-Resistance Support Coupling - Oldham Type (Vespel) - Clamping Type	SURE-FLEX	MOP Clean, Vacuum, Heat-Resistance Support Coupling - Oldham Type (PEEK)	MSXP-C Clean, Vacuum, Heat-Resistance Support Coupling - Slit Type (PEEK) - Clamping Type

Loading...Tải…

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia. (machined) D1(Ø)
1

1.5

2

2.5

3

3.17

3.2

4

4.5

4.76

5

6

6.35

7

7.93

8

9

9.5

9.52

9.525

9.53

10

11

12

12.7

13

14

15

15.875

16

17

18

19

20

20.5

21

22

23

24

25

25.4

26

27

28

29

30

30.5

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

50

52

55

56

58

60

65

70

75

78

80

0635

09525
Drawing

ClearTrống

Shaft Bore Dia. (machined) D2(Ø)
1

1.5

2

2.4

2.5

3

3.17

3.2

4

4.5

4.76

5

6

6.35

7

7.93

8

9

9.252

9.5

9.52

9.525

9.53

10

11

12

12.7

13

14

15

15.875

16

17

18

19

20

21

22

23

24

25

25.4

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

48

50

52

55

56

58

60

65

70

75

78

80
Drawing

ClearTrống

Outer Dia. A(Ø)
6

6.4

8

9

9.5

10

12

12.7

13

13.5

13.8

14

14.5

15

16

16.1

16.5

16.6

16.8

17

17.5

17.8

18

19

19.1

19.5

19.6

20

21

22

22.2

22.5

23.8

24

24.5

25

25.4

25.5

26

26.2

26.5

26.6

27

27.3

28

28.8

29

29.5

30

31.7

31.8

32

32.8

33

33.3

34

34.4

34.5

35

36

37.8

38

39

39.5

40

41.0

41.3

42

42.5

42.8

43

44

44.5

44.8

45

46

47

48

49

50

53

53.6

54

54.5

54.8

55

56

57

58

60

63

64

65

66

68

69

69.9

70

73

75

79

79.5

80

81

82

83

85

87

88

90

93

94

94.5

95

99

100

102

104

104.5

105

112

117

118

120

125

126

135

138

140

143

144

150

152

155

160

161

168

170

178

185

190

194

200

210

214

225

246

262

276

308

346
Drawing

ClearTrống

Overall Length W(mm)
5.1

7.3

8.4

9

9.4

9.6

10

10.2

10.5

11.2

11.4

11.8

11.9

12

12.35

12.4

12.7

13

13.5

14

14.2

14.4

14.5

14.6

14.7

14.9

15

15.4

15.5

15.6

15.7

15.8

15.9

16

16.2

16.5

16.6

16.7

17

17.4

17.5

17.6

17.8

17.9

18

18.1

18.4

18.5

18.7

18.8

19

19.1

19.2

19.35

19.4

19.6

19.7

19.8

20

20.2

20.4

20.5

21

21.1

21.2

21.3

21.4

21.5

21.6

22

22.1

22.2

22.4

22.5

22.8

23

23.05

23.1

23.15

23.2

23.3

23.4

23.5

23.6

23.9

24

24.1

24.2

24.4

24.5

24.9

25

25.4

25.45

25.5

25.6

25.7

25.9

26

26.1

26.2

26.5

26.6

27

27.2

27.3

27.4

28

28.1

28.2

28.3

28.4

28.5

28.8

29

29.4

29.5

29.8

30

30.2

30.4

30.5

31

31.2

31.4

31.5

31.6

31.7

31.8

32

32.2

32.3

32.5

32.6

32.7

32.8

33

33.2

33.3

33.5

33.6

33.8

34

34.1

34.2

34.3

34.4

34.5

35

35.5

35.6

36

36.1

36.4

36.5

36.8

37

37.2

37.4

37.5

37.8

38

38.2

38.4

38.5

38.6

39

39.2

39.4

39.5

39.7

39.8

40

40.5

41

41.8

42

42.2

43

43.2

43.4

43.5

43.6

43.8

44

44.2

44.5

44.7

44.8

45

45.1

45.2

45.3

45.5

46

46.1

46.4

46.6

47

47.1

47.2

47.6

48

48.4

49

49.2

49.4

49.7

50

50.2

50.5

50.6

50.8

51

51.2

51.3

51.4

52

52.8

53

53.2

53.3

53.4

53.6

54

54.1

54.3

54.4

54.5

54.6

55

55.5

56

56.1

56.2

56.5

56.6

56.8

57

57.5

58

58.2

58.5

58.6

59

59.4

59.7

59.8

59.9

60

60.4

60.5

60.8

61

61.2

62

63

63.4

63.5

63.6

63.7

63.8

64

64.8

65

65.4

65.6

66

66.4

66.6

66.7

66.8

67

67.1

67.5

68

68.3

68.5

68.6

68.7

68.8

69.2

69.5

69.6

69.8

70

70.5

70.6

70.7

70.9

71

71.2

71.4

72

72.4

73

73.3

74

74.4

74.8

75

75.5

75.6

75.8

75.9

76.2

77

77.2

77.6

77.8

78

78.8

79.5

79.8

80

80.8

81

81.5

81.8

82

82.5

82.6

82.8

83

83.6

84

84.7

85

85.2

85.5

85.6

86

87.6

88

89.2

89.3

89.5

89.6

89.8

89.9

90

90.5

90.8

91

92

93.6

94

95

95.6

96

96.6

97

97.2

98

98.5

98.6

98.7

99

99.2

99.6

100

100.2

101

101.6

102

102.5

104

104.4

105.8

106

107.6

108

109

110

111

112.8

113

113.4

114

115

115.6

117.6

118

118.4

118.8

119.6

120

120.8

121

123.6

124

125

126

127

129

129.6

130

131

136.4

137.6

138

138.7

140

141

144

144.2

146

147

150

150.6

153.0

154

154.6

156.4

160

164

164.6

170.6

176

178.4

182.8

185

192.4

193

200

208.8

209.2

210

216

217

218

223

238

241.2

249.4

260

286.8

290

307.0

335

337.2

377

391

421

607
Drawing

ClearTrống

Application
- Standard
- Servo Motor
- Stepping Motor
- Encoder
ClearTrống

Allowable Torque Range(N•m)
0.05~1.00

1.01~3.00

3.01~5.00

5.01~10.00

10.01~20.00

20.01~50.00

50.01~100.00

100 < 500

500 < 1000

1000 < 5000

5000 < 10000

10000 < 20000

20000 < 50000
ClearTrống

Features
Clean Environment

Heat Resistant

High Accuracy

High Durability

High Torque

High Torsional Rigidity

Low Moment of Inertia

No Backlash

Small

Standard (Input Prohibited)

Unfinished Shaft Bore

Vacuum Environment

Vibration Insulation
ClearTrống

Allowable Misalignment
- Not Provided
- Angular Misalignment
- Eccentricity
- Axial Misalignment
Larger Image

ClearTrống

Max. Rotational Speed Range(r/min)
100~ 300

1001~2000

2001~4000

4001~10000

10001~78000

78001~
ClearTrống

Body Material
- Stainless Steel
- Steel
- Aluminum
- Alloy
- Plastic
- Aluminum Alloy
ClearTrống

Allowable Torque(N•m)
0.05

0.06

0.08

0.1

0.12

0.147

0.15

0.16

0.18

0.196

0.2

0.21

0.22

0.25

0.3

0.31

0.343

0.35

0.392

0.4

0.42

0.49

0.5

0.54

0.55

0.6

0.65

0.7

0.7845

0.8

0.84

0.9

1

1.1

1.2

1.275

1.3

1.4

1.5

1.6

1.7

1.76

1.8

1.9

1.961

2

2.1

2.2

2.3

2.4

2.452

2.5

2.6

2.8

3

3.2

3.3

3.4

3.432

3.5

3.6

3.67

3.8

3.923

4

4.2

4.4

4.5

4.7

4.8

4.9

5

5.4

5.5

5.6

5.7

5.8

6

6.3

6.4

6.6

6.8

6.865

6.9

7

7.2

7.4

7.5

8

8.4

9

9.4

9.6

9.8

9.807

9.81

10

11

11.2

12

12.5

12.6

13

13.1

13.5

14

14.7

15

15.4

15.7

16

17

17.65

17.652

18

19

19.7

20

21

22

23

24

24.5

25

26

27

28

29

29.42

30

31

31.5

32

33

34

34.3

35

36

37.3

37.5

38

39.227

40

41

42

44

44.13

45

46

48

49

49.033

50

51

52

53.9

54

55

56

60

61

65

67

68

70

71

72

75

78.5

79

80

84

85

89

90

92

95

96

98.067

100

105

107

108

110

114

117

118

120

121

123

130

132

135

137

140

150

151

157

160

170

176

176.52

180

188

190

194

196

198

200

210

215.746

220

226

239

245

250

258

260

265

270

294

300

310

314

320

325

352

380

400

441

450

480

525

530

580

588

600

620

637

650

740

800

810

850

883

900

980

1000

1050

1120

1300

1370

1700

2000

2100

3400

4000

5000

5400

7000

8000

10000

15000

20000
Calculation of the allowable torque (or the Safety Factor, etc.) differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
ClearTrống

Allowable Angular Misalignment(deg)
0.1

0.15

0.2

0.5

0.6

0.7

1

1.2

1.3

1.4

1.5

1.6

1.8

2

2.5

3

3.5

4

5

6

8

10

14
ClearTrống

Allowable Lateral Misalignment(mm)
0

0.01

0.02

0.03

0.05

0.06

0.08

0.09

0.1

0.11

0.12

0.13

0.14

0.15

0.17

0.18

0.19

0.2

0.22

0.23

0.24

0.25

0.26

0.27

0.28

0.29

0.3

0.31

0.32

0.33

0.34

0.35

0.36

0.38

0.4

0.44

0.45

0.46

0.47

0.48

0.5

0.51

0.52

0.54

0.55

0.58

0.6

0.63

0.64

0.68

0.7

0.8

0.82

0.84

0.9

0.91

0.92

1

1.05

1.08

1.1

1.12

1.2

1.3

1.33

1.4

1.5

1.6

1.61

1.9

2

2.1

2.3

2.4

2.5

2.6

2.8

2.9

3

3.2

3.3

3.5

3.8

4

4.5

5

6

7

8

10

12
ClearTrống

Product Category
- Coupling Main Body
- Maintenance Components
ClearTrống

Allowable Lateral Misalignment Range(mm)
Less than 0.02

0.02~0.2

0.21~0.40

0.41~1.0

1.1~3.0

3.1~5.0

5.1~100
ClearTrống

Max. Rotational Speed(r/min)
7,700

9,000

12,000

14,000

16,000

17,000

18,000

20,000

24,000

27,000

30,000

40,000

250

900

2000

2350

2500

2550

2700

2800

2900

3000

3100

3150

3200

3400

3500

3600

3750

3800

4000

4200

4300

4400

4500

4700

4800

5000

5100

5200

5250

5500

5800

5900

6000

6200

6500

6800

7000

7400

7500

7600

7700

7900

8000

8200

8400

8500

8700

9000

9200

9500

9600

9800

10000

11000

11900

12000

13000

14000

15000

15900

16000

17000

18000

19000

20000

21000

22000

23000

23800

24000

25000

26000

27000

30000

31000

32000

33000

34000

34100

35000

37000

39000

40000

42000

45000

52000

63000

78000

100000
ClearTrống

Buffer Material
- Carbon Reinforced Resin
- Polyacetal
- Polyurethane
- Nylon
- Vespel
- PEEK
- Aluminum Bronze
- Others
- Nitrile
- Fluororubber
ClearTrống

Disc Material
- Stainless Steel
- Polyimide
- Carbon Fiber
- Aluminum
- Glass Fiber Reinforced Resin
- Polyacetal
ClearTrống

Bellows Material
- Stainless Steel
- Phosphor Bronze
- Others
ClearTrống

Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này

back next

Related Categories to Flexible Shaft CouplingsDanh mục liên quan đến Flexible Shaft Couplings

FAQ Flexible Shaft Couplings

Question: What are the different types of flexible Shaft Couplings?: Answer: There are several types of flexible Shaft Couplings, including beam, bellows, jaw, Oldham, disc, diaphragm, and gear couplings. Each type has unique features and benefits that make them suitable for different applications and environments. Flexible Shaft Couplings are used to connect two shafts and allow for misalignment while transmitting torque between them.
Question: What factors should be considered when selecting a flexible Shaft Couplings?: Answer: The factor for selecting a flexible coupling, there are several factors that should be considered, including the required torque capacity, misalignment capability, operating speed, and environmental factors such as temperature and humidity. Other considerations include the required degree of axial and radial stiffness, the space available for the coupling, and the type of equipment being connected. It is also important to consider the potential for wear and tear, maintenance requirements, and the cost of the coupling.
Question: How is a flexible Shaft Couplings installed and maintained?: Answer: Shaft Couplings are installed by aligning the shafts and tightening the screws or bolts. Maintenance involves regular inspections for signs of wear, damage, or misalignment. Lubrication is important to prevent excessive wear and reduce friction. Cleaning and tightening of bolts and screws are also necessary to ensure proper operation.
Question: What is the difference between a flexible coupling and a rigid coupling?: Answer: A flexible coupling allows for some misalignment between two connected shafts while transmitting torque, while a rigid coupling does not allow for any misalignment. Flexible Shaft Couplings are designed to absorb shock and vibration, which can help reduce wear and tear on connected equipment. Rigid couplings, on the other hand, are used in applications where precise alignment between shafts is critical, such as in high-speed rotating equipment or precision machinery.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

NABEYA BI-TECH Flexible Shaft Couplings（Allowable Misalignment：Eccentricity）

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia. (machined) D1(Ø)

Shaft Bore Dia. (machined) D2(Ø)

Outer Dia. A(Ø)

Overall Length W(mm)

Application

Allowable Torque Range(N•m)

Features

Allowable Misalignment

Max. Rotational Speed Range(r/min)

Body Material

Allowable Torque(N•m)

Allowable Angular Misalignment(deg)

Allowable Lateral Misalignment(mm)

Product Category

Allowable Lateral Misalignment Range(mm)

Max. Rotational Speed(r/min)

Buffer Material

Disc Material

Bellows Material