SANDVIK Turning Inserts（work material：Cast Iron）

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Negative Insert For Turning (Triangular Shaped 60°)【1-10 Pieces Per Package】

  SANDVIK

  [Features]Carbide-coated insertTriangular-shaped insertNegative insertFor machining general steel and low-carbon steelFor finishing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Outer Diameter/Inner Diameter	3	Finish / Medium grinding	Negative	0.4 ～ 1.6	No-hand	-	-	-	-	-

  From: 281,488 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Positive Tip for Machining

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  C (80° Diamond-Shape)	Cast Iron	Outer Diameter/Inner Diameter	2	Finish / Medium grinding	Pozidriv	0.4 ～ 1.2	No-hand	-	-	-	-	-

  From: 278,700 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 107 Diamond Shaped 35°【1-10 Pieces Per Package】

  SANDVIK

  [Features]Carbide-coated insert for outer-diameter machining of small componentsLeft/right handed insertDiamond-shaped 35° insertPositive insertFor general engineering and machining heat-resistant alloysFor finishing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  V (35° Diamond-Shaped)	Cast Iron	Outer Diameter/Inner Diameter	2	Finish / Medium grinding	Pozidriv	0.2 ～ Other	No-hand	-	-	-	-	-

  From: 361,918 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN【1-10 Pieces Per Package】

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  D (55° Diamond-Shape)	Cast Iron	Outer Diameter/Inner Diameter	2	Finish / Medium grinding	Pozidriv	0.4 ～ 0.8	No-hand	-	-	-	-	-

  From: 258,686 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-MaxP Insert X-Line CNMG

  SANDVIK

  [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Diamond-shaped 80° insert· Negative insert

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  C (80° Diamond-Shape)	Cast Iron	Outer Diameter/Inner Diameter	4	Finish / Medium grinding / Medium to deep grinding	Negative	0.4 ～ 1.6	No-hand	-	-	-	-	-

  From: 287,065 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STUB-ACME 29° Thread Crest, With Chamfering Blade

  SANDVIK

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Threading	3	-	-	-	Right-hand / Left-hand	-	-	Outer Diameter / Internal Diameter	-	3TPI ～ 16TPI

  From: 936,834 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 107 Triangular Shaped 60°【1-10 Pieces Per Package】

  SANDVIK

  [Features]Carbide-coated insert for outer-diameter machining of small componentsPrecision classTriangular-shaped insertLeft/right handed insertPositive insertFor general engineering and machining heat-resistant alloysFor finishing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Outer Diameter/Inner Diameter	3	Finish / Medium grinding	Pozidriv	0.2 ～ Other	No-hand	-	-	-	-	-

  From: 217,343 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)【1-10 Pieces Per Package】

  SANDVIK

  [Features]Carbide-coated insertHexagonal-shaped 80° insertNegative insertFor machining general steel and stainless steelFor semi-finishing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  W (Hexagonal Type)	Cast Iron	Outer Diameter/Inner Diameter	6	Finish / Medium grinding	Negative	0.4 ～ 1.6	No-hand	-	-	-	-	-

  From: 270,730 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 107 Positive Insert For Turning (Triangular Shaped 60°)

  SANDVIK

  [Features]Carbide-coated insert for outer-diameter machining of small components and general inner-diameter machiningTriangular-shaped insertWiper insertPositive insertFor machining heat-resistant alloysFor finishing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Outer Diameter/Inner Diameter	3	Finish	Pozidriv	0.2 ～ 0.8	No-hand	-	-	-	-	-

  From: 217,343 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  CORO-TURN 111 Positive Tip for Machining

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  C (80° Diamond-Shape)	Cast Iron	Outer Diameter/Inner Diameter	2	Finish / Medium grinding	Pozidriv	0.4 ～ 0.8	No-hand	-	-	-	-	-

  From: 237,001 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Negative Insert T-Max P Triangular Shaped 60°

  SANDVIK

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Outer Diameter/Inner Diameter	3	-	Negative	0.4 ～ 1.6	No-hand	-	-	-	-	-

  From: 395,931 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-MAX P For turning【1-10 Pieces Per Package】

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  D (55° Diamond-Shape)	Cast Iron	Outer Diameter/Inner Diameter	2	Finish / Medium grinding	Negative	0.4 ～ 1.6	No-hand	-	-	-	-	-

  From: 417,045 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P insert for turning, Square, Lathe Negative Tip, SNMA/SNMG/SNMM【1-10 Pieces Per Package】

  SANDVIK

  [Features]Carbide-coated insertSquare-shaped insertNegative insertFor machining general steelFor semi-finishing

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  S (Rectangular)	Cast Iron	Outer Diameter/Inner Diameter	4	Medium grinding	Negative	0.8 ～ Other	No-hand	-	-	-	-	-

  From: 168,704 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Square Shaped 90°

  SANDVIK

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  S (Rectangular)	Cast Iron	Outer Diameter/Inner Diameter	4	Medium grinding / Medium to deep grinding	Negative	1.2 ～ 1.6	No-hand	-	-	-	-	-

  From: 426,510 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-MaxP Insert X-Line WNMG

  SANDVIK

  [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Hex 80° insert· Negative insert

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  W (Hexagonal Type)	Cast Iron	Outer Diameter/Inner Diameter	6	Finish / Medium grinding / Medium to deep grinding	Negative	0.4 ～ 1.2	No-hand	-	-	-	-	-

  From: 321,659 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut

  SANDVIK

  Sharp cutting edge and high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Cast Iron	Grooving / Parting	1	-	-	0.4	No-hand	4.00mm ～ 6.00mm	-	-	-	-

  From: 553,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X-Line Chip (Negative)

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Outer Diameter/Inner Diameter	3	Finish / Medium grinding	Negative	0.4 ～ 0.8	No-hand	-	-	-	-	-

  From: 297,243 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut For Profiling

  SANDVIK

  [Features]T-Max Q-Cut insertSolid carbide-coated insertFor parting and -groovingSingle-cutting-edge specificationFor profilingFor medium-feed machiningFull RWidth: 3.0 mm

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Cast Iron	Grooving / Parting	1	-	-	Other	No-hand	3.00 mm ～ 10.00 mm	-	-	-	-

  From: 407,068 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ISO Trapezoid 30° Thread Crest, With Chamfering Blade

  SANDVIK

  [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor trapezoidal 30° threadsMachining pitch: for 8 mm

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Threading	3	-	-	-	Right-hand / Left-hand	-	1.50 mm ～ 3.00 mm	Outer Diameter / Internal Diameter	Trapezoid 30°	-

  From: 936,834 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ACME Trapezoid 29° Thread Crest, With Chamfering Blade

  SANDVIK

  [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor ACME trapezoidal 29° threadsMachining pitch: for 4 threads

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Threading	3	-	-	-	Right-hand / Left-hand	-	-	Outer Diameter / Internal Diameter	Trapezoid 29°	3TPI ～ 16TPI

  From: 936,834 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P CBN Negative Insert For Turning (Diamond Shaped 80°)

  SANDVIK

  T-Max P CBN Negative Insert[Application]Outer Diameter/Inner Diameter[Specifications]Shape: C (80° Diamond-Shape)Available corners: 2Rake angle: NegativeSelfishly: No-handTip relief angle(°): 0

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  C (80° Diamond-Shape)	Cast Iron	Outer Diameter/Inner Diameter	2	-	Negative	0.4 ～ 1.6	No-hand	-	-	-	-	-

  From: 468,172 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Insert For Turning

  SANDVIK

  [Features]T-Max S, carbide-coated insert for general machiningPrecision classSquare-shaped insertPositive insertFor general steel machiningWithout breaker

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  S (Rectangular) / T (Triangle)	Cast Iron	Outer Diameter/Inner Diameter	3 / 4	-	-	0.4 ～ Other	No-hand	-	-	-	-	-

  From: 181,090 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X-Line Insert (Negative, Hexagonal Shaped 80°)

  SANDVIK

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  W (Hexagonal Type)	Cast Iron	Outer Diameter/Inner Diameter	6	Finish / Medium grinding / Medium to deep grinding	Negative	0.4 ～ 0.8	No-hand	-	-	-	-	-

  From: 376,311 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 For Profiling

  SANDVIK

  [Features]CoroCut 2 insertsSolid carbide-coated tipFor parting and groovingThe rail lock provides high clamp rigidity2-cutting-edge specificationFor groovingFor low-feed machiningSeat size: FWidth: 3.0 mmFull R

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Cast Iron	Grooving / Parting	2	-	-	Other	No-hand	3.00 mm ～ 8.00 mm	-	-	-	-

  From: 730,045 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Ceramic Negative Tip for T-Max P Turning Tool

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  R (Circular)	Cast Iron	Outer Diameter/Inner Diameter	1	-	Negative	Other	No-hand	-	-	-	-	-

  From: 410,078 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Negative Tip for T-Max P Turning Tool

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  C (80° Diamond-Shape)	Cast Iron	Outer Diameter/Inner Diameter	2	Finish / Medium grinding	Negative	0.4 ～ 1.6	No-hand	-	-	-	-	-

  From: 318,488 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  Positive Tip for T-Max S Turning Tool

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Outer Diameter/Inner Diameter	3	-	-	0.2 ～ 0.8	No-hand	-	-	-	-	-

  From: 200,611 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  T-Max Ceramic Tip for Turning

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  D (55° Diamond-Shape)	Cast Iron	Outer Diameter/Inner Diameter	2	-	Negative	0.8 ～ 1.2	No-hand	-	-	-	-	-

  From: 405,262 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 2 Plunging/Grooving Blank Tip

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Cast Iron	Grooving / Parting	1	-	-	0.2	No-hand	2.7mm ～ 3.8mm	-	-	-	-

  From: 656,795 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross-Thread 254 Circlip Grooving Tips

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Grooving / Parting	3	-	-	Other	Right-hand	3.15mm ～ 4.15mm	-	-	-	-

  From: 1,043,255 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross-Thread 266 Thread Cutting CBN Tip

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Threading	1	-	-	-	Right-hand	-	1.5-3mm	Internal Diameter	-	16-8TPI

  From: 4,746,101 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Ceramic Positive Tip for Machining

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  R (Circular)	Cast Iron	Outer Diameter/Inner Diameter	1	-	Pozidriv	Other	No-hand	-	-	-	-	-

  From: 790,245 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic tip (material 6060/6065)

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  S (Rectangular)	Cast Iron	Outer Diameter/Inner Diameter	4	-	Negative	0.8 ～ 1.6	No-hand	-	-	-	-	-

  From: 344,459 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic tip (for turning)

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Outer Diameter/Inner Diameter	3	-	Negative	0.8 ～ 1.2	No-hand	-	-	-	-	-

  From: 382,085 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Chip for Lathe Turning【1-10 Pieces Per Package】

  SANDVIK

  Unique shape exhibits high performance

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  V (35° Diamond-Shaped)	Cast Iron	Outer Diameter/Inner Diameter	2	Medium grinding	Negative	0.8 ～ 1.2	No-hand	-	-	-	-	-

  From: 480,979 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut For Grooving

  SANDVIK

  [Features]T-Max Q-Cut insertSolid carbide-coated insertFor parting and groovingSingle-edge specificationFor groovingFor low-feed machiningWidth: 5.0 mm

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Cast Iron	Grooving / Parting	1	-	-	0.2 ～ Other	No-hand	2.00 mm ～ 10.00 mm	-	-	-	-

  From: 413,955 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut For Turning And Recessing

  SANDVIK

  [Features]T-Max Q-Cut insertSolid carbide-coated insertFor parting and groovingSingle-cutting-edge specificationFor turningFor low-feed machiningWidth: 4.0 mm

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Cast Iron	Grooving / Parting	1	-	-	0.4 ～ 0.8	No-hand	3.00 mm ～ 6.00 mm	-	-	-	-

  From: 483,676 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Blank

  SANDVIK

  [Features]T-Max Q-Cut insertSolid carbide-coated insertFor parting and groovingSingle-cutting-edge specificationFor machining reliefs, recesses etc.For medium-feed machiningWidth: 4.0 mm

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Cast Iron	Grooving / Parting	1	-	-	Other	No-hand	3.00 mm	-	-	-	-

  From: 617,545 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut (151.3 Type) For Inner Diameter Grooving

  SANDVIK

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Cast Iron	Grooving / Parting	1	-	-	0.2 ～ Other	No-hand	1.85 mm ～ 6.00 mm	-	-	-	-

  From: 381,182 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut (151.3 Type) For Face Grooving, Inner Diameter Grooving, Turning

  SANDVIK

  [Features]T-Max Q-Cut insertSolid carbide-coated insertFor parting and groovingSingle-cutting-edge specificationFor groovingFor low-feed machiningWidth: 4.0 mm

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  Other	Cast Iron	Grooving / Parting	1	-	-	0.4 ～ Other	No-hand	3.00 mm ～ 6.00 mm	-	-	-	-

  From: 450,210 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroThread 266 V-Shaped 55° Without Finishing Blade

  SANDVIK

  [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor inner-diameter threadingWithout finishing blade, for 55° threadsMachining pitch: for 7-4 threads

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Threading	3	-	-	Other	Right-hand / Left-hand	-	-	Outer Diameter / Internal Diameter	-	7-4TPI ～ 28-14TPI

  From: 751,717 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroThread 266 Metric 60° With Finishing Blade【1-10 Pieces Per Package】

  SANDVIK

  [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor metric threadsMachining pitch: for 5.0 mm

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Threading	3	Finish	-	-	Right-hand / Left-hand	-	0.50 mm ～ 5.50 mm	Outer Diameter / Internal Diameter	ISO Meter 60°	-

  From: 755,601 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroThread 266 UN 60° With Finishing Blade

  SANDVIK

  [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor inch threadsMachining pitch: for 5 threads

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Threading	3	Finish	-	-	Right-hand / Left-hand	-	-	Outer Diameter / Internal Diameter	unified 60°	4.5TPI ～ 32TPI

  From: 751,717 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade

  SANDVIK

  [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor 55° Whitworth threadsMachining pitch: for 5 threads

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Threading	3	Finish	-	-	Right-hand / Left-hand	-	-	Outer Diameter / Internal Diameter	Whitworth 55°	4.5TPI ～ 28TPI

  From: 751,717 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroThread 266 NPT 60° NPSC, NPTR, LINEPIPE1) With Finishing Blade

  SANDVIK

  [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor NPT 60° threadsMachining pitch: for 18 threads

  Shape	work material	Application	Available corners	Breaker Use	Rake angle	Nose R	Selfishly	Groove Width (For Grooving / Plunging)	Pitch (for Threading)	O.D./ I.D. (For Threading)	Screw Types (for threading)	Number of threads (for threading)
  T (Triangle)	Cast Iron	Threading	3	Finish	-	-	Right-hand / Left-hand	-	-	Outer Diameter / Internal Diameter	-	8TPI ～ 27TPI

  From: 751,717 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Shape
work material
Application
Available corners
Breaker Use
Rake angle
Nose R
Selfishly
Groove Width (For Grooving / Plunging)
Pitch (for Threading)
O.D./ I.D. (For Threading)
Screw Types (for threading)
Number of threads (for threading)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	T-Max P Negative Insert For Turning (Triangular Shaped 60°)【1-10 Pieces Per Package】	CORO-TURN 107 Positive Tip for Machining	CoroTurn 107 Diamond Shaped 35°【1-10 Pieces Per Package】	CORO-TURN【1-10 Pieces Per Package】	T-MaxP Insert X-Line CNMG	STUB-ACME 29° Thread Crest, With Chamfering Blade	CoroTurn 107 Triangular Shaped 60°【1-10 Pieces Per Package】	T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)【1-10 Pieces Per Package】	CoroTurn 107 Positive Insert For Turning (Triangular Shaped 60°)	CORO-TURN 111 Positive Tip for Machining	Negative Insert T-Max P Triangular Shaped 60°	T-MAX P For turning【1-10 Pieces Per Package】	T-Max P insert for turning, Square, Lathe Negative Tip, SNMA/SNMG/SNMM【1-10 Pieces Per Package】	T-Max P Square Shaped 90°	T-MaxP Insert X-Line WNMG	CoroCut	X-Line Chip (Negative)	T-Max Q-Cut For Profiling	ISO Trapezoid 30° Thread Crest, With Chamfering Blade	ACME Trapezoid 29° Thread Crest, With Chamfering Blade	T-Max P CBN Negative Insert For Turning (Diamond Shaped 80°)	T-Max Insert For Turning	X-Line Insert (Negative, Hexagonal Shaped 80°)	CoroCut 1/2 For Profiling	Ceramic Negative Tip for T-Max P Turning Tool	Negative Tip for T-Max P Turning Tool	Positive Tip for T-Max S Turning Tool	T-Max Ceramic Tip for Turning	CoroCut 2 Plunging/Grooving Blank Tip	Cross-Thread 254 Circlip Grooving Tips	Cross-Thread 266 Thread Cutting CBN Tip	CORO-TURN 107 Ceramic Positive Tip for Machining	Ceramic tip (material 6060/6065)	Ceramic tip (for turning)	T-Max P Chip for Lathe Turning【1-10 Pieces Per Package】	T-Max Q-Cut For Grooving	T-Max Q-Cut For Turning And Recessing	T-Max Q-Cut Blank	T-Max Q-Cut (151.3 Type) For Inner Diameter Grooving	T-Max Q-Cut (151.3 Type) For Face Grooving, Inner Diameter Grooving, Turning	CoroThread 266 V-Shaped 55° Without Finishing Blade	CoroThread 266 Metric 60° With Finishing Blade【1-10 Pieces Per Package】	CoroThread 266 UN 60° With Finishing Blade	CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade	CoroThread 266 NPT 60° NPSC, NPTR, LINEPIPE1) With Finishing Blade
From	281,488 VND-	278,700 VND-	361,918 VND-	258,686 VND-	287,065 VND-	936,834 VND-	217,343 VND-	270,730 VND-	217,343 VND-	237,001 VND-	395,931 VND-	417,045 VND-	168,704 VND-	426,510 VND-	321,659 VND-	553,657 VND-	297,243 VND	407,068 VND-	936,834 VND-	936,834 VND-	468,172 VND-	181,090 VND-	376,311 VND	730,045 VND-	410,078 VND-	318,488 VND-	200,611 VND-	405,262 VND-	656,795 VND-	1,043,255 VND	4,746,101 VND	790,245 VND-	344,459 VND-	382,085 VND-	480,979 VND-	413,955 VND-	483,676 VND-	617,545 VND	381,182 VND-	450,210 VND-	751,717 VND-	755,601 VND-	751,717 VND-	751,717 VND-	751,717 VND-
Days to ShipSố ngày giao hàng	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	4 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Shape	T (Triangle)	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	T (Triangle)	T (Triangle)	W (Hexagonal Type)	T (Triangle)	C (80° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	S (Rectangular)	S (Rectangular)	W (Hexagonal Type)	Other	T (Triangle)	Other	T (Triangle)	T (Triangle)	C (80° Diamond-Shape)	S (Rectangular) / T (Triangle)	W (Hexagonal Type)	Other	R (Circular)	C (80° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	Other	T (Triangle)	T (Triangle)	R (Circular)	S (Rectangular)	T (Triangle)	V (35° Diamond-Shaped)	Other	Other	Other	Other	Other	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)
work material	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron
Application	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Threading	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Grooving / Parting	Outer Diameter/Inner Diameter	Grooving / Parting	Threading	Threading	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Grooving / Parting	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Grooving / Parting	Grooving / Parting	Threading	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Grooving / Parting	Grooving / Parting	Grooving / Parting	Grooving / Parting	Grooving / Parting	Threading	Threading	Threading	Threading	Threading
Available corners	3	2	2	2	4	3	3	6	3	2	3	2	4	4	6	1	3	1	3	3	2	3 / 4	6	2	1	2	3	2	1	3	1	1	4	3	2	1	1	1	1	1	3	3	3	3	3
Breaker Use	Finish / Medium grinding	Finish / Medium grinding	Finish / Medium grinding	Finish / Medium grinding	Finish / Medium grinding / Medium to deep grinding	-	Finish / Medium grinding	Finish / Medium grinding	Finish	Finish / Medium grinding	-	Finish / Medium grinding	Medium grinding	Medium grinding / Medium to deep grinding	Finish / Medium grinding / Medium to deep grinding	-	Finish / Medium grinding	-	-	-	-	-	Finish / Medium grinding / Medium to deep grinding	-	-	Finish / Medium grinding	-	-	-	-	-	-	-	-	Medium grinding	-	-	-	-	-	-	Finish	Finish	Finish	Finish
Rake angle	Negative	Pozidriv	Pozidriv	Pozidriv	Negative	-	Pozidriv	Negative	Pozidriv	Pozidriv	Negative	Negative	Negative	Negative	Negative	-	Negative	-	-	-	Negative	-	Negative	-	Negative	Negative	-	Negative	-	-	-	Pozidriv	Negative	Negative	Negative	-	-	-	-	-	-	-	-	-	-
Nose R	0.4 ～ 1.6	0.4 ～ 1.2	0.2 ～ Other	0.4 ～ 0.8	0.4 ～ 1.6	-	0.2 ～ Other	0.4 ～ 1.6	0.2 ～ 0.8	0.4 ～ 0.8	0.4 ～ 1.6	0.4 ～ 1.6	0.8 ～ Other	1.2 ～ 1.6	0.4 ～ 1.2	0.4	0.4 ～ 0.8	Other	-	-	0.4 ～ 1.6	0.4 ～ Other	0.4 ～ 0.8	Other	Other	0.4 ～ 1.6	0.2 ～ 0.8	0.8 ～ 1.2	0.2	Other	-	Other	0.8 ～ 1.6	0.8 ～ 1.2	0.8 ～ 1.2	0.2 ～ Other	0.4 ～ 0.8	Other	0.2 ～ Other	0.4 ～ Other	Other	-	-	-	-
Selfishly	No-hand	No-hand	No-hand	No-hand	No-hand	Right-hand / Left-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	Right-hand	Right-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Groove Width (For Grooving / Plunging)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	4.00mm ～ 6.00mm	-	3.00 mm ～ 10.00 mm	-	-	-	-	-	3.00 mm ～ 8.00 mm	-	-	-	-	2.7mm ～ 3.8mm	3.15mm ～ 4.15mm	-	-	-	-	-	2.00 mm ～ 10.00 mm	3.00 mm ～ 6.00 mm	3.00 mm	1.85 mm ～ 6.00 mm	3.00 mm ～ 6.00 mm	-	-	-	-	-
Pitch (for Threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1.50 mm ～ 3.00 mm	-	-	-	-	-	-	-	-	-	-	-	1.5-3mm	-	-	-	-	-	-	-	-	-	-	0.50 mm ～ 5.50 mm	-	-	-
O.D./ I.D. (For Threading)	-	-	-	-	-	Outer Diameter / Internal Diameter	-	-	-	-	-	-	-	-	-	-	-	-	Outer Diameter / Internal Diameter	Outer Diameter / Internal Diameter	-	-	-	-	-	-	-	-	-	-	Internal Diameter	-	-	-	-	-	-	-	-	-	Outer Diameter / Internal Diameter	Outer Diameter / Internal Diameter	Outer Diameter / Internal Diameter	Outer Diameter / Internal Diameter	Outer Diameter / Internal Diameter
Screw Types (for threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Trapezoid 30°	Trapezoid 29°	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	ISO Meter 60°	unified 60°	Whitworth 55°	-
Number of threads (for threading)	-	-	-	-	-	3TPI ～ 16TPI	-	-	-	-	-	-	-	-	-	-	-	-	-	3TPI ～ 16TPI	-	-	-	-	-	-	-	-	-	-	16-8TPI	-	-	-	-	-	-	-	-	-	7-4TPI ～ 28-14TPI	-	4.5TPI ～ 32TPI	4.5TPI ～ 28TPI	8TPI ～ 27TPI

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	T-Max P Negative Insert For Turning (Triangular Shaped 60°)【1-10 Pieces Per Package】	CORO-TURN 107 Positive Tip for Machining	CoroTurn 107 Diamond Shaped 35°【1-10 Pieces Per Package】	CORO-TURN【1-10 Pieces Per Package】	T-MaxP Insert X-Line CNMG	STUB-ACME 29° Thread Crest, With Chamfering Blade	CoroTurn 107 Triangular Shaped 60°【1-10 Pieces Per Package】	T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)【1-10 Pieces Per Package】	CoroTurn 107 Positive Insert For Turning (Triangular Shaped 60°)	CORO-TURN 111 Positive Tip for Machining	Negative Insert T-Max P Triangular Shaped 60°	T-MAX P For turning【1-10 Pieces Per Package】	T-Max P insert for turning, Square, Lathe Negative Tip, SNMA/SNMG/SNMM【1-10 Pieces Per Package】	T-Max P Square Shaped 90°	T-MaxP Insert X-Line WNMG	CoroCut	X-Line Chip (Negative)	T-Max Q-Cut For Profiling	ISO Trapezoid 30° Thread Crest, With Chamfering Blade	ACME Trapezoid 29° Thread Crest, With Chamfering Blade	T-Max P CBN Negative Insert For Turning (Diamond Shaped 80°)	T-Max Insert For Turning	X-Line Insert (Negative, Hexagonal Shaped 80°)	CoroCut 1/2 For Profiling	Ceramic Negative Tip for T-Max P Turning Tool	Negative Tip for T-Max P Turning Tool	Positive Tip for T-Max S Turning Tool	T-Max Ceramic Tip for Turning	CoroCut 2 Plunging/Grooving Blank Tip	Cross-Thread 254 Circlip Grooving Tips	Cross-Thread 266 Thread Cutting CBN Tip	CORO-TURN 107 Ceramic Positive Tip for Machining	Ceramic tip (material 6060/6065)	Ceramic tip (for turning)	T-Max P Chip for Lathe Turning【1-10 Pieces Per Package】	T-Max Q-Cut For Grooving	T-Max Q-Cut For Turning And Recessing	T-Max Q-Cut Blank	T-Max Q-Cut (151.3 Type) For Inner Diameter Grooving	T-Max Q-Cut (151.3 Type) For Face Grooving, Inner Diameter Grooving, Turning	CoroThread 266 V-Shaped 55° Without Finishing Blade	CoroThread 266 Metric 60° With Finishing Blade【1-10 Pieces Per Package】	CoroThread 266 UN 60° With Finishing Blade	CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade	CoroThread 266 NPT 60° NPSC, NPTR, LINEPIPE1) With Finishing Blade

Loading...Tải…