SANDVIK Holding Tools for O.D. Tuning（Application：End Face）

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand / Left-hand	End Face	Cable clamp	16 ～ 32	16 ～ 32

  From: 2,777,823 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit T-Max P Lever Clamp PCLNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	End Face	Lever lock	20	20

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	End Face	Cable clamp	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Pin Lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp, SCLCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	End Face	Clamp-on	-	-

  From: 6,975,588 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  T-Max Shank Bit

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	Negative	Right-hand	End Face	Clamp-on	40	25

  From: 7,457,547 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Shank Bit for Negative Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Cable clamp	20 ～ 32	20 ～ 32

  From: 3,405,139 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for Turning Processing

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	End Face	Lever lock	-	-

  From: 14,010,565 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Left-hand	End Face	Lever lock	40	40

  From: 6,515,708 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	End Face	-	-	-

  From: 13,147,830 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDUNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	End Face	-	-	-

  From: 8,803,333 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DRSNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand / Left-hand	End Face	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	End Face	-	-	-

  From: 22,638,820 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P, Turning Cutting Unit, C8-PRSCL

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Left-hand	End Face	-	-	-

  From: 10,821,561 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P, Turning Cutting Unit, C8-PRSCR

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand	End Face	-	-	-

  From: 10,956,711 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, 177.9

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	No-hand	End Face	-	20 ～ 25	9 ～ 13

  From: 4,102,268 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, CTFPR/L

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand / Left-hand	End Face	Clamp-on	-	-

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Cartridge For Turning Tool, CSKPR/L

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Left-hand	End Face	Clamp-on	12	12

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn RC Double Clamp, DSSNR/L

  SANDVIK

  T-Max P Turning Shank Bits for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Cable clamp	32 ～ 40	25 ～ 40

  From: 3,691,105 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP

  SANDVIK

  Sandvik External holder CoroTurn HP Coromant Capto Cutting head for internal turning C-PCLNR/L-HP

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	End Face	Lever lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroPlex TT Multi-Function Turning Tool, C-TB-CN

  SANDVIK

  Equipped with 2 turning inserts in the same tool, greatly reducing tool change timeSpace-saving tool pot in tool magazine

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	End Face	-	0	-

  From: 39,085,298 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Pozidriv	Right-hand / Left-hand	End Face	Clamp-on	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	End Face	Clamp-on	-	-

  From: 13,931,828 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	End Face	Cable clamp	-	-

  From: 13,931,828 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	End Face	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12

  SANDVIK

  Tool that combines external turning and internal turning boring with two inserts in the same toolGood chip control and long tool life

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	End Face	-	-	-

  From: 28,909,040 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	End Face	-	-	-

  From: 16,745,498 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	End Face	Lever lock	-	-

  From: 24,557,575 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	End Face	Lever lock	-	-

  From: 22,638,820 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, CoroTurn RC Double Clamp, DSKNR/L

  SANDVIK

  T-Max P series shank tool bit for highly productive outer diameter turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Cable clamp	32	25

  From: 3,896,686 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit For Outer-Diameter Turning, PRGCR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Pozidriv	Left-hand	End Face	Lever lock	20	20

  From: 3,093,776 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	End Face	Clamp-on	8	8

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	End Face	Clamp-on	32	25 ～ 32

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	End Face	Cable clamp	-	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	End Face	Clamp-on	-	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	End Face	Clamp-on	32	25

  From: 5,451,962 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Pin Lock	-	-

  From: 14,107,208 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn, Outer Diameter Turning Negative Inserts, High Pressure Coolant Specification, C-PSKNR/L/-PSRNL/R-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Pin Lock	-	-

  From: 16,197,281 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L

  SANDVIK

  Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite Coromant Capto Cutting Head C-DDUNR/L

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Cable clamp	-	-

  From: 6,975,588 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative	Right-hand / Left-hand	End Face	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DSKNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Cable clamp	-	-

  From: 8,803,333 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DSSNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Cable clamp	-	-

  From: 7,817,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DWLNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand / Left-hand	End Face	Cable clamp	-	-

  From: 7,728,776 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Pin Lock	-	-

  From: 10,783,648 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, MWLNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand / Left-hand	End Face	Double Clamp	-	-

  From: 7,091,463 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR/L	Shank Tool Bit T-Max P Lever Clamp PCLNR/L	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP	Sandvik CoroTurn 107, Screw Clamp, SCLCR/L	T-Max Shank Bit	CORO-TURN RC, Shank Bit for Negative Tips	Tool Bit for Turning Processing	Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L	T-Max P Cutting Unit For Turning	T-Max P Cutting Unit For Turning, C-DDUNR/L	T-Max P Cutting Unit For Turning, C-DRSNR/L	T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP	T-Max P, Turning Cutting Unit, C8-PRSCL	T-Max P, Turning Cutting Unit, C8-PRSCR	T-Max S Shank Tool Bit For Turning, 177.9	T-Max S Shank Tool Bit For Turning, CTFPR/L	T-Max S Cartridge For Turning Tool, CSKPR/L	CoroTurn RC Double Clamp, DSSNR/L	CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP	CoroPlex TT Multi-Function Turning Tool, C-TB-CN	Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR/L	Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL	Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL	Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4	Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12	Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP	Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP	Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-HP	Shank Tool Bit, CoroTurn RC Double Clamp, DSKNR/L	Shank Tool Bit For Outer-Diameter Turning, PRGCR/L	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S	Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4	Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP	CoroTurn, Outer Diameter Turning Negative Inserts, High Pressure Coolant Specification, C-PSKNR/L/-PSRNL/R-HP	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DSKNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DSSNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DWLNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L	Sandvik, T-Max P, Cutting Unit, Turning, MWLNR/L
From	2,777,823 VND-	3,447,280 VND	9,772,263 VND-	12,668,141 VND-	6,975,588 VND-	7,457,547 VND	3,405,139 VND-	14,010,565 VND	6,515,708 VND	13,147,830 VND	8,803,333 VND-	9,413,108 VND	22,638,820 VND	10,821,561 VND	10,956,711 VND	4,102,268 VND-	3,447,280 VND-	3,447,280 VND	3,691,105 VND-	12,668,141 VND-	39,085,298 VND	7,915,072 VND-	13,931,828 VND	13,931,828 VND-	9,772,263 VND-	28,909,040 VND-	16,745,498 VND-	24,557,575 VND	22,638,820 VND	3,896,686 VND-	3,093,776 VND	3,339,521 VND	5,519,688 VND-	5,519,688 VND	5,519,688 VND	5,451,962 VND-	14,107,208 VND-	16,197,281 VND	6,975,588 VND-	8,453,730 VND-	8,803,333 VND-	7,817,848 VND-	7,728,776 VND-	10,783,648 VND-	7,091,463 VND-
Days to ShipSố ngày giao hàng	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s)	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Applicable Tip Shape	W (Hexagonal Type)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	S (Rectangular)	C (80° Diamond-Shape)	Other	C (80° Diamond-Shape)	S (Rectangular)	S (Rectangular)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	R (Circular)	C (80° Diamond-Shape)	R (Circular)	R (Circular)	T (Triangle)	T (Triangle)	S (Rectangular)	S (Rectangular)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	R (Circular)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	R (Circular)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	S (Rectangular)	S (Rectangular)	S (Rectangular)	C (80° Diamond-Shape)	S (Rectangular)	D (55° Diamond-Shape)	R (Circular)	S (Rectangular)	S (Rectangular)	W (Hexagonal Type)	S (Rectangular)	W (Hexagonal Type)
Applicable Chip Clearance Angle	Negative	Negative	-	Negative	Pozidriv	Negative	Negative	-	Negative	-	-	-	-	-	-	-	-	-	Negative	-	-	Pozidriv	-	-	-	-	-	-	-	Negative	Pozidriv	Pozidriv	-	-	-	-	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative
Selfishly	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand	No-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	Left-hand	Right-hand / Left-hand	No-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Application	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face
Clamp Shape	Cable clamp	Lever lock	Cable clamp	Pin Lock	Clamp-on	Clamp-on	Cable clamp	Lever lock	Lever lock	-	-	-	-	-	-	-	Clamp-on	Clamp-on	Cable clamp	Lever lock	-	Clamp-on	Clamp-on	Cable clamp	Clamp-on	-	-	Lever lock	Lever lock	Cable clamp	Lever lock	Clamp-on	Clamp-on	Cable clamp	Clamp-on	Clamp-on	Pin Lock	Pin Lock	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Pin Lock	Double Clamp
Shank height(mm)	16 ～ 32	20	-	-	-	40	20 ～ 32	-	40	-	-	-	-	-	-	20 ～ 25	-	12	32 ～ 40	-	0	-	-	-	-	-	-	-	-	32	20	8	32	-	-	32	-	-	-	-	-	-	-	-	-
Shank width(mm)	16 ～ 32	20	-	-	-	25	20 ～ 32	-	40	-	-	-	-	-	-	9 ～ 13	-	12	25 ～ 40	-	-	-	-	-	-	-	-	-	-	25	20	8	25 ～ 32	25	25	25	-	-	-	-	-	-	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR/L	Shank Tool Bit T-Max P Lever Clamp PCLNR/L	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP	Sandvik CoroTurn 107, Screw Clamp, SCLCR/L	T-Max Shank Bit	CORO-TURN RC, Shank Bit for Negative Tips	Tool Bit for Turning Processing	Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L	T-Max P Cutting Unit For Turning	T-Max P Cutting Unit For Turning, C-DDUNR/L	T-Max P Cutting Unit For Turning, C-DRSNR/L	T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP	T-Max P, Turning Cutting Unit, C8-PRSCL	T-Max P, Turning Cutting Unit, C8-PRSCR	T-Max S Shank Tool Bit For Turning, 177.9	T-Max S Shank Tool Bit For Turning, CTFPR/L	T-Max S Cartridge For Turning Tool, CSKPR/L	CoroTurn RC Double Clamp, DSSNR/L	CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP	CoroPlex TT Multi-Function Turning Tool, C-TB-CN	Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR/L	Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL	Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL	Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4	Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12	Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP	Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP	Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-HP	Shank Tool Bit, CoroTurn RC Double Clamp, DSKNR/L	Shank Tool Bit For Outer-Diameter Turning, PRGCR/L	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S	Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4	Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP	CoroTurn, Outer Diameter Turning Negative Inserts, High Pressure Coolant Specification, C-PSKNR/L/-PSRNL/R-HP	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DSKNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DSSNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DWLNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L	Sandvik, T-Max P, Cutting Unit, Turning, MWLNR/L

Loading...Tải…