SANDVIK Holding Tools for O.D. Tuning（Selfishly：Right-hand）

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Cable clamp	20 ～ 32	20 ～ 32

  From: 3,691,105 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSRNR/L -4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter	Clamp-on	-	-

  From: 10,902,832 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCACR-E06

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	10 ～ 12	10 ～ 12

  From: 3,151,713 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand	Outer Diameter / End Face	Cable clamp	16 ～ 32	16 ～ 32

  From: 3,059,588 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTGNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter	Cable clamp	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit T-Max P Lever Clamp PCLNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Lever lock	20	20

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter	Clamp-on	-	-

  From: 10,902,832 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDHNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRSNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand	Outer Diameter	Clamp-on	-	-

  From: 9,772,263 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / End Face / Chamfer	Cable clamp	-	-

  From: 12,571,594 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Pin Lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	Outer Diameter	Cable clamp	-	-

  From: 7,817,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	Outer Diameter / Profiling / Chamfer	Double Clamp	-	-

  From: 7,817,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, SVJBR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	-	-

  From: 10,201,168 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp, SCLCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / End Face / Chamfer	Clamp-on	-	-

  From: 6,975,588 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L

  SANDVIK

  Sandvik Outer Diameter Holder Small Lathe Tool Shank Bit QS Holding System Short Bit QS- SVABR/L

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	Outer Diameter / Profiling	Clamp-on	12	12

  From: 4,739,186 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11

  SANDVIK

  [Features]An outer-diameter turning tool featuring stable insert clamping and excellent repeatability. Produces an unimpeded flow of cutting chips. Requires little space for operation. Features a small number of component parts. For outer-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand	Outer Diameter	Clamp-on	12	12

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 3,958,685 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  QS Holding System Stepping CoroTurn 107 Bit

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	Outer Diameter	Clamp-on	16	16

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  T-Max Shank Bit

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	Negative	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Clamp-on	40	25

  From: 7,457,547 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Shank Bit for Ceramic Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	32	36

  From: 7,494,355 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Shank Bit for Negative Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face / Chamfer	Cable clamp	20 ～ 32	20 ～ 32

  From: 3,691,105 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Bit, Solid Boring Bit, Boring Bit Adapter

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	-	-

  From: 13,319,148 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for Turning Processing

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter / End Face / Profiling / Chamfer	Lever lock	-	-

  From: 13,833,100 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit T-Max P Lever Clamp PSBNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	Outer Diameter	Lever lock	16	16

  From: 3,097,514 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C3-MVJNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DRSNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand	Outer Diameter / End Face / Profiling	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / End Face / Chamfer	-	-	-

  From: 22,638,820 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PDJNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 10,783,648 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PSRNR/L-19HP

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter	-	-	-

  From: 17,567,820 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Shank Tool Bit For Turning, R/L170.35

  SANDVIK

  T-Max P Turning Shank Bits for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	-	Right-hand	-	-	40	25

  From: 5,198,698 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P, Turning Cutting Unit, C8-PRSCR

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	-	Right-hand	Outer Diameter / End Face / Profiling	-	-	-

  From: 10,956,711 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, CSDPR/L

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter / Post-Grinding	Clamp-on	-	-

  From: 3,824,136 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, CTFPR/L

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	End Face	Clamp-on	-	-

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, CTGPR/L

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	Outer Diameter	Clamp-on	32	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, CTTPR/L

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	Outer Diameter	Clamp-on	-	25

  From: 4,039,353 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Shank Tool Bit For Turning, CSRNR/L

  SANDVIK

  T-Max Turning Shank Bits for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand	Outer Diameter	Clamp-on	32	25 ～ 32

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Shank Tool Bit For Turning, CTGNR/L

  SANDVIK

  T-Max Turning Shank Bits for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand	Outer Diameter	Clamp-on	-	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SRSCR/L-HP

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Pozidriv	Right-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 14,107,208 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	-	-

  From: 19,726,421 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn RC Double Clamp, DSSNR/L

  SANDVIK

  T-Max P Turning Shank Bits for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	Outer Diameter / End Face / Chamfer	Cable clamp	32 ～ 40	25 ～ 40

  From: 3,691,105 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling / Chamfer	Lever lock	-	-

  From: 13,353,411 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR/L-HP-X

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	-	-

  From: 11,708,366 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP Cutting Head, Outer Diameter Turning - Tool Bit For Negative Inserts, C-PDUNR/L-HP

  SANDVIK

  Excellent cutting chip control and process stability for one of the best part qualityAccurate high-precision coolant supply controls cutting chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand	Outer Diameter	Lever lock	-	-

  From: 16,197,281 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP

  SANDVIK

  Sandvik External holder CoroTurn HP Coromant Capto Cutting head for internal turning C-PCLNR/L-HP

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand	Outer Diameter / End Face / Chamfer	Lever lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L	Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSRNR/L -4	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SCACR-E06	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTGNR/L	Shank Tool Bit T-Max P Lever Clamp PCLNR/L	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4	T-Max P Cutting Unit For Turning, C-DDHNR/L	Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRSNR/L	Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP	Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L	Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L	Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, SVJBR/L	Sandvik CoroTurn 107, Screw Clamp, SCLCR/L	Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11	Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S	QS Holding System Stepping CoroTurn 107 Bit	T-Max Shank Bit	T-Max Shank Bit for Ceramic Tips	CORO-TURN RC, Shank Bit for Negative Tips	Shank Bit, Solid Boring Bit, Boring Bit Adapter	Tool Bit for Turning Processing	Shank Tool Bit T-Max P Lever Clamp PSBNR/L	T-Max P Cutting Unit For Turning, C3-MVJNR/L	T-Max P Cutting Unit For Turning, C-DRSNR/L	T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP	T-Max P Cutting Unit For Turning, C-PDJNR/L	T-Max P Cutting Unit For Turning, C-PSRNR/L-19HP	T-Max P Shank Tool Bit For Turning, R/L170.35	T-Max P, Turning Cutting Unit, C8-PRSCR	T-Max S Shank Tool Bit For Turning, CSDPR/L	T-Max S Shank Tool Bit For Turning, CTFPR/L	T-Max S Shank Tool Bit For Turning, CTGPR/L	T-Max S Shank Tool Bit For Turning, CTTPR/L	T-Max Shank Tool Bit For Turning, CSRNR/L	T-Max Shank Tool Bit For Turning, CTGNR/L	Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SRSCR/L-HP	Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP	CoroTurn RC Double Clamp, DSSNR/L	CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP	CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR/L-HP-X	CoroTurn HP Cutting Head, Outer Diameter Turning - Tool Bit For Negative Inserts, C-PDUNR/L-HP	CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP
From	3,691,105 VND-	10,902,832 VND-	3,151,713 VND-	3,059,588 VND-	7,915,072 VND-	3,447,280 VND	10,902,832 VND	9,413,108 VND	9,772,263 VND-	12,571,594 VND	12,668,141 VND-	7,817,848 VND-	7,817,848 VND-	10,201,168 VND-	6,975,588 VND-	4,739,186 VND	3,339,521 VND	3,958,685 VND-	9,413,108 VND	7,457,547 VND	7,494,355 VND	3,691,105 VND-	13,319,148 VND-	13,833,100 VND-	3,097,514 VND	7,915,072 VND	9,413,108 VND	22,638,820 VND	10,783,648 VND	17,567,820 VND	5,198,698 VND	10,956,711 VND	3,824,136 VND	3,447,280 VND	5,519,688 VND	4,039,353 VND	5,519,688 VND-	5,519,688 VND	14,107,208 VND-	19,726,421 VND-	3,691,105 VND-	13,353,411 VND-	11,708,366 VND-	16,197,281 VND	12,668,141 VND-
Days to ShipSố ngày giao hàng	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more
Applicable Tip Shape	T (Triangle)	S (Rectangular)	C (80° Diamond-Shape)	W (Hexagonal Type)	T (Triangle)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	R (Circular)	C (80° Diamond-Shape)	S (Rectangular)	S (Rectangular)	T (Triangle)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	T (Triangle)	V (35° Diamond-Shaped)	T (Triangle)	Other	R (Circular)	C (80° Diamond-Shape)	S (Rectangular)	S (Rectangular)	S (Rectangular)	V (35° Diamond-Shaped)	R (Circular)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	V (35° Diamond-Shaped)	R (Circular)	S (Rectangular)	T (Triangle)	T (Triangle)	T (Triangle)	S (Rectangular)	T (Triangle)	R (Circular)	V (35° Diamond-Shaped)	S (Rectangular)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	C (80° Diamond-Shape)
Applicable Chip Clearance Angle	Negative	-	-	Negative	Negative	Negative	-	-	-	-	Negative	Negative	Negative	Pozidriv	Pozidriv	-	Pozidriv	Pozidriv	-	Negative	-	Negative	-	-	Negative	-	-	-	-	-	-	-	-	-	-	-	-	-	Pozidriv	Pozidriv	Negative	-	-	Negative	-
Selfishly	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand
Application	Outer Diameter	Outer Diameter	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter / Profiling / Chamfer	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Profiling	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter	-	Outer Diameter / End Face / Profiling	Outer Diameter / Post-Grinding	End Face	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter	Outer Diameter / Profiling	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter	Outer Diameter / End Face / Chamfer
Clamp Shape	Cable clamp	Clamp-on	Clamp-on	Cable clamp	Cable clamp	Lever lock	Clamp-on	-	Clamp-on	Cable clamp	Pin Lock	Cable clamp	Double Clamp	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Cable clamp	Clamp-on	Lever lock	Lever lock	-	-	-	-	-	-	-	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Cable clamp	Lever lock	Clamp-on	Lever lock	Lever lock
Shank height(mm)	20 ～ 32	-	10 ～ 12	16 ～ 32	-	20	-	-	-	-	-	-	-	-	-	12	12	-	16	40	32	20 ～ 32	-	-	16	-	-	-	-	-	40	-	-	-	32	-	32	-	-	-	32 ～ 40	-	-	-	-
Shank width(mm)	20 ～ 32	-	10 ～ 12	16 ～ 32	-	20	-	-	-	-	-	-	-	-	-	12	12	-	16	25	36	20 ～ 32	-	-	16	-	-	-	-	-	25	-	-	-	25	25	25 ～ 32	25	-	-	25 ～ 40	-	-	-	-

Loading...Tải…