(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
YAMAWA MFG Screw-Hole-Related Tools（Hole type：For blind hole）
YAMAWA MFG offers products Screw-Hole-Related Tools specified by Hole type For blind hole from Cutting Tools product category. There are a total of 97 items. A tool for drilling and cutting workpieces that can be used with a wide range of materials. YAMAWA MFG products are available to order through MISUM
YAMAWA MFG offers products Screw-Hole-Related Tools specified by Hole type For blind hole from Cutting Tools product category. There are a total of 97 items. A tool for drilling and cutting workpieces that can be used with a wide range of materials. YAMAWA MFG products are available to order through MISUMI online 24/7. Free shipping, no minimum order.
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
97 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
YAMAWA MFG
Hand tap used for general tapping work.[Features]・ High blade tip strength makes it easy for regrinding.・ More suitable for manual work compared to taps of other shapes.・ 2 types are available, with 5P or 1.5P chamfered threads.・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.・ Machining with mechanical machinery is also possible.・ Has straight grooves out of consideration for cutting chip stow.・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.[Applications]・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) No.0 ～ M48 Meter / unified / Sewing Machine Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.2 ～ 100 High-speed steel Hand Tap For blind hole 1.5P ～ 5P - NA 36 ～ 185 Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) No.10 ～ M48 Meter / unified / Whitworth / Sewing Machine Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.25 ～ 64 High-speed steel Spiral Tap For blind hole 2.5P - NA 36 ～ 195 Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Hand Taps for Stainless Steels_SU-HT
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.· Capable of machining both synchronously and asynchronously.· Machining speed of 5 m/min or less is recommended.[Applications]Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1/4-28UNF ～ M30 Meter / unified / Whitworth Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] 0.4 ～ 3.5 High-speed steel Hand Tap For blind hole 1.5P ～ 4P - NA 42 ～ 135 From: 125,309 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Spiral Fluted Taps, Oxidized_SP-OX
YAMAWA MFG
Spiral taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.· Oxide treatment also removes residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) No.10 ～ M30 Meter / unified / Whitworth Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] 0.4 ～ 24 High-speed steel Spiral Tap For blind hole 2.5P - NA 42 ～ 135 From: 145,946 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Aluminum_AL+SP
YAMAWA MFG
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.[Features]· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.· Stable, clean thread machining can be performed.[Applications]· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M2 ～ M24 Meter Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.4 ～ 3 High-speed steel Spiral Tap For blind hole 2.5P - NA 42 ～ 135 From: 200,640 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads, Long (ℓg) Type_PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1'-11 ～ 7/8-14 Taper for Pipe Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] - High-speed steel Tap for pipes For blind hole 2.5P - NA 55 ～ 145 From: 409,830 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Thermosetting_PL1
YAMAWA MFG
Especially suitable for thermosetting resins where tapping is more difficult than other synthetic resins.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M2 ～ M8 Meter Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] 0.4 ～ 1.25 High-speed steel Hand Tap For blind hole 3P - NA 42 ～ 70 From: 251,908 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1 ～ M48 Meter / unified Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.5 ～ 24 High-speed steel Hand Tap For blind hole 1.5P ～ 5P - NA 70 ～ 300 From: 455,100 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Spiral Fluted Taps for Stainless Steels_SU+SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.[Features]· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.· Stable scrap is ejected and a good finish is realized.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]Optimal for machining extremely viscous or work-hardened work material.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) No.10 ～ M45 Meter / unified / Whitworth High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] 0.3 ～ 56 High-speed steel Spiral Tap For blind hole 2.5P - NA 36 ～ 180 From: 158,478 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Roll Taps for Non-Ferrous Materials_N+RS
YAMAWA MFG
A roll tap suitable for threading non-ferrous materials (aluminum casting, aluminum die casting, brass etc.).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M1 ～ M10 Meter Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.25 ～ 1.5 High-speed steel Roll tap For blind hole 2P ～ 4P - NA 36 ～ 75 From: 185,130 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for American Taper Pipe Threads_NPT
YAMAWA MFG
Tap for machining American taper pipe "NPT" female threads.[Features]· The groove is a straight hand tap type. Comes with three biting teeth at the tip.· General-purpose tap for general steel materials.[Applications]· To be used when machining American tapered pipe thread for pipes "NPT" female thread.* American standard pipe threads, available in many types, can be complicated.* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1'-11.5 ～ 3/8-18 Taper for Pipe Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] - High-speed steel Tap for pipes For blind hole 3P - NA 54 ～ 120 From: 609,510 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A roll tap suitable for threading steel materials (carbon steel, alloy steel, stainless steel, etc.).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M1 ～ M16 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] 0.25 ～ 2 High-speed steel Roll tap For blind hole 2P ～ 4P - NA 36 ～ 95 From: 156,021 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Left Hand Threads_SP-LH
YAMAWA MFG
* N-SP(LH) will switch to SP(LH) as soon as the stock runs out.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M2 ～ M30 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.4 ～ 3.5 High-speed steel Spiral Tap For blind hole 2.5P - NA 42 ～ 135 From: 228,258 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A coating roll tap suitable for threading steel and nonferrous materials.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M1 ～ M6 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.25 ～ 1 High-speed steel Roll tap For blind hole 2P ～ 4P TiN Available 36 ～ 62 From: 377,150 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Plus Series Spiral Fluted Taps_+SP
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M2 ～ M6 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.4 ～ 1 High-speed steel Spiral Tap For blind hole 2.5P - NA 42 ～ 62 From: 147,422 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
High Performance Roll Taps, Coated_HP+RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) No.10-32UNF ～ M20 Meter / unified Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.25 ～ 1.75 Powder high-speed steel Roll tap For blind hole 2P ～ 4P TiCN Available 36 ～ 105 From: 386,979 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1 ～ M36 Meter / unified / Whitworth Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.5 ～ 24 High-speed steel Spiral Tap For blind hole 2.5P - NA 70 ～ 300 From: 283,784 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads Short (ℓg) Type_S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1'-11 ～ 3/8-19 Taper for Pipe Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] - High-speed steel Tap for pipes For blind hole 2.5P - NA 55 ～ 155 From: 502,618 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Parallel Pipe Threads_G
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1'1/4-11 ～ 3/8-19 Parallel for Pipes Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] - High-speed steel Tap for pipes For blind hole 3.5P - NA 59 ～ 140 From: 461,985 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide taps for ultra hard materials_UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M2 ～ M20 Meter High Hardness Steel (50-60 HRC)[○] 0.4 ～ 2.5 Carbide Point tap For blind hole 5P TiAlN Available 40 ～ 105 From: 2,107,063 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Hand Taps for Hard-to-Machine Materials_EH-HT
YAMAWA MFG
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M3 ～ M30 Meter Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] 0.5 ～ 3.5 Cobalt HSS Hand Tap For blind hole 2.5P ～ 5P - NA 46 ～ 135 From: 178,530 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI
YAMAWA MFG
Hand tap for machining female threads for inserting insert coils.[Features]· Blade designed to be ideal for aluminum type work materials, enabling stable female thread machining to be performed.· 2 types are available, with 5P or 1.5P biting threads, to suit the application used.· Screw precision in accordance with class 1b.· Work material: Aluminum rolled material, aluminum alloy casting, zinc alloy casting.[Applications]Ideal for machining female threads for inserting insert coils after threading.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) No.10 ～ M24 Meter / unified Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] 0.45 ～ 48 High-speed steel Hand Tap For blind hole 1.5P ～ 5P Non-Coated NA 52 ～ 135 From: 235,620 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Die Cast Materials_LA-HT
YAMAWA MFG
[Features]· An oversize tap suitable for female thread cutting in materials that tend to contract, such as aluminum alloy diecast (ADC) and zinc alloy diecast (ZDC).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M2 ～ M16 Meter Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] 0.4 ～ 2 High-speed steel Hand Tap For blind hole 1.5P ～ 5P Nitriding Treatment Available 42 ～ 95 From: 269,118 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for American Dryseal Taper Pipe Threads_NPTF
YAMAWA MFG
Tap for machining American taper pipe "NPTF" female threads.[Features]· The groove is a straight hand tap type. Comes with three biting teeth at the tip.· General-purpose tap for general steel materials.[Applications]· To be used when machining American tapered thread for dry seal pipe "NPTF" female thread.* American standard pipe threads, available in many types, can be complicated.* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1'-11.5 ～ 3/8-18 Taper for Pipe Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] - High-speed steel Tap for pipes For blind hole 3P - NA 54 ～ 105 From: 987,666 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP
YAMAWA MFG
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.[Features]· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.· Completely threaded to prevent the blade from chipping.· Reduction of friction resistance and tapping torque.· Maintains screw guidance (stable machining).· Maintains excellent chip discharge performance (smooth discharge).[Applications]· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.· Ideal for water soluble cutting fluids.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M2 ～ M12 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.4 ～ 1.75 High-speed steel Spiral Tap For blind hole 2.5P TiN Available 42 ～ 82 From: 449,897 VND Special Price Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Roll Taps for Steels_LS-N-RZ
YAMAWA MFG
A roll tap suitable for threading steel materials (carbon steel, alloy steel, stainless steel, etc.).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M8 ～ M10 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] 1.25 ～ 1.5 High-speed steel Roll tap For blind hole 2P ～ 4P - NA 100 ～ 150 From: 692,953 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads_Rc
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1'-11 ～ 3/8-19 Taper for Pipe Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] - High-speed steel Tap for pipes For blind hole 2.5P - NA 59 ～ 140 From: 500,651 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Hand Taps for Taper Pipe Threads Long (ℓg) Type_LS-PT
YAMAWA MFG
For standard pipe taps, it is used when the protruding length of the screw is insufficient.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1 ～ 3/8 Taper for Pipe Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 11 ～ 28 High-speed steel Tap for pipes For blind hole 2.5P - NA 100 ～ 200 From: 831,600 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Parallel Pipe Threads_PF
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1 ～ 7/8 Parallel for Pipes Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 11 ～ 28 High-speed steel Tap for pipes For blind hole 1.5P ～ 3.5P - NA 55 ～ 105 From: 426,094 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Taps for Light Alloys_N-CT-FC
YAMAWA MFG
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) No.10-32UNF ～ M24 Meter / unified Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] 0.3 ～ 3 Carbide Hand Tap For blind hole 1.5P ～ 3P - NA 34 ～ 120 From: 1,870,873 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Soft Structural Steels_E-SP
YAMAWA MFG
A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M3 ～ M24 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] 0.5 ～ 3 High-speed steel Spiral Tap For blind hole 2.5P - NA 46 ～ 120 From: 232,388 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Cast Irons_FC-HT
YAMAWA MFG
[Features]· Suitable for thread machining with brittle and hard materials such as cast iron, designed appropriately oversized to handle rapid wear.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M3 ～ M18 Meter Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] 0.5 ～ 2 High-speed steel Hand Tap For blind hole 1.5P ～ 5P Nitriding Treatment Available 46 ～ 100 From: 148,170 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps 1.5P_SP-1.5P
YAMAWA MFG
■ The SP 1.5P has a shorter cutting chamferthan usual and there is no convex center atthe end. This makes it the best spiral flute tapfor machining a blind hole that does not havethe pilot hole length for processing the threadlength.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M1.2 ～ M16 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] 0.25 ～ 2 High-speed steel Spiral Tap For blind hole 1.5P - - 36 ～ 95 From: 221,231 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP
YAMAWA MFG
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M6 ～ M20 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] 1 ～ 1.75 Cobalt HSS Spiral Tap For blind hole 2.5P TiCN Available 62 ～ 105 From: 679,270 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for longitudinal machining.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M6 ～ M20 Meter Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 1 ～ 1.75 Cobalt HSS Spiral Tap For blind hole 2.5P TiCN Available 62 ～ 105 From: 679,270 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for transverse machining.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M6 ～ M20 Meter Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 1 ～ 1.75 Cobalt HSS Spiral Tap For blind hole 2.5P TiCN Available 62 ～ 105 From: 679,270 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for vertical machining of blind holes in materials such as carbon steel and alloy steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M6 ～ M20 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] 1 ～ 1.75 Cobalt HSS Spiral Tap For blind hole 2.5P TiCN Available 62 ～ 105 From: 679,270 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP
YAMAWA MFG
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M6 ～ M20 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] 1 ～ 1.75 Cobalt HSS Spiral Tap For blind hole 2.5P TiCN Available 62 ～ 105 From: 679,270 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP
YAMAWA MFG
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Suitable for blind holes in aluminum castings, for both longitudinal and transverse machining.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M6 ～ M20 Meter Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 1 ～ 1.75 Cobalt HSS Spiral Tap For blind hole 2.5P TiCN Available 62 ～ 105 From: 679,270 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
X Series Hand Taps for Taper Pipe Threads Short (ℓg) Type_PT-X
YAMAWA MFG
■ PT-X hand tap, adopting new tap blank, ensuresproperly long projection length of the tool.Having short thread length, this tap is suitablefor tapping of such machine components ashave the limit in their thickness.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1/2-14 ～ 3/8-19 Taper for Pipe Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] - High-speed steel Tap for pipes For blind hole 2.5P - NA 75 ～ 105 From: 539,405 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
The blade shape adopted is less prone to damage during machining of aluminum alloy castings, etc. Achieves a longer life.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M6 ～ M12 Meter Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 1 ～ 1.75 Powder high-speed steel Hand Tap For blind hole 1.5P TiN Available 62 ～ 82 From: 626,263 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for American Taper Pipe Threads, Short (ℓg) Type_S-NPT
YAMAWA MFG
■ The S-NPT is a hand tap for the Americantapered pipe threads and is used for tappingwhere it is necessary to shorten the fittinglength for piping parts. Its main purpose istightness of threaded parts in connection withpipe parts etc.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1'-11.5 ～ 3/8-18 Taper for Pipe Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] - High-speed steel Tap for pipes For blind hole 3P - NA 55 ～ 95 From: 973,833 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for American Parallel Pipe Threads_NPS
YAMAWA MFG
■ The NPS tap is a hand tap for American parallelpipe threads and is used for products whosemain purpose is the tightness of the threadedpart in connecting pipe parts and the like.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) 1/2-14 ～ 1/8-27 Parallel for Pipes Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Nickel-based alloy (Inconel, etc.)[○] - High-speed steel Tap for pipes For blind hole 5P - NA 55 ～ 80 From: 888,573 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT
YAMAWA MFG
There is less than 1 chamfer thread, making it ideal for blind holes without any spare depth in the pilot hole.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M1.4 ～ M3 Meter Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.3 ～ 0.5 High-speed steel Hand Tap For blind hole 1P - NA 36 ～ 46 From: 277,891 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Torqueless Roll Taps with Short Chamfer_SC-TL-RZ
YAMAWA MFG
The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M1 ～ M6 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.2 ～ 1 Powder high-speed steel Roll tap For blind hole 1P TiCN Available 36 ～ 62 From: 597,733 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list. 
  | You can add up to 6 items per a category to the compare list.       | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list. 
  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product SeriesDòng sản phẩm | Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI | Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP | Long Shank Hand Taps for Taper Pipe Threads Long (ℓg) Type_LS-PT | For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP | For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS | For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP | For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS | For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP | For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP | X Series Hand Taps for Taper Pipe Threads Short (ℓg) Type_PT-X | Hand Taps for American Taper Pipe Threads, Short (ℓg) Type_S-NPT | Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT | |||||||||||||||||||||||||||||||||
| From | - | - | 125,309 VND Special Price On Sale Till 31/03/2025 | 145,946 VND Special Price On Sale Till 31/03/2025 | 200,640 VND- | 409,830 VND- | 251,908 VND- | 455,100 VND- | 158,478 VND Special Price On Sale Till 31/03/2025 | 185,130 VND- | 609,510 VND- | 156,021 VND- | 228,258 VND- | 377,150 VND- | 147,422 VND Special Price On Sale Till 31/03/2025 | 386,979 VND- | 283,784 VND- | 502,618 VND- | 461,985 VND- | 2,107,063 VND- | 178,530 VND Special Price On Sale Till 31/03/2025 | 235,620 VND- | 269,118 VND- | 987,666 VND- | 449,897 VND Special Price On Sale Till 31/03/2025 | 692,953 VND- | 500,651 VND- | 831,600 VND- | 426,094 VND- | 1,870,873 VND- | 232,388 VND- | 148,170 VND- | 221,231 VND- | 679,270 VND- | 679,270 VND- | 679,270 VND- | 679,270 VND- | 679,270 VND- | 679,270 VND- | 539,405 VND- | 626,263 VND- | 973,833 VND- | 888,573 VND- | 277,891 VND- | 597,733 VND- |
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | 9 Day(s) or more | Same day or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | Same day or more | Same day or more | 9 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 9 Day(s) or more | Same day or more | 6 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 7 Day(s) or more | Same day or more | 9 Day(s) | 6 Day(s) or more |
| Screw size (Nominal) | No.0 ～ M48 | No.10 ～ M48 | 1/4-28UNF ～ M30 | No.10 ～ M30 | M2 ～ M24 | 1'-11 ～ 7/8-14 | M2 ～ M8 | 1 ～ M48 | No.10 ～ M45 | M1 ～ M10 | 1'-11.5 ～ 3/8-18 | M1 ～ M16 | M2 ～ M30 | M1 ～ M6 | M2 ～ M6 | No.10-32UNF ～ M20 | 1 ～ M36 | 1'-11 ～ 3/8-19 | 1'1/4-11 ～ 3/8-19 | M2 ～ M20 | M3 ～ M30 | No.10 ～ M24 | M2 ～ M16 | 1'-11.5 ～ 3/8-18 | M2 ～ M12 | M8 ～ M10 | 1'-11 ～ 3/8-19 | 1 ～ 3/8 | 1 ～ 7/8 | No.10-32UNF ～ M24 | M3 ～ M24 | M3 ～ M18 | M1.2 ～ M16 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | 1/2-14 ～ 3/8-19 | M6 ～ M12 | 1'-11.5 ～ 3/8-18 | 1/2-14 ～ 1/8-27 | M1.4 ～ M3 | M1 ～ M6 |
| Screw Types | Meter / unified / Sewing Machine | Meter / unified / Whitworth / Sewing Machine | Meter / unified / Whitworth | Meter / unified / Whitworth | Meter | Taper for Pipe | Meter | Meter / unified | Meter / unified / Whitworth | Meter | Taper for Pipe | Meter | Meter | Meter | Meter | Meter / unified | Meter / unified / Whitworth | Taper for Pipe | Parallel for Pipes | Meter | Meter | Meter / unified | Meter | Taper for Pipe | Meter | Meter | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Meter / unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Meter | Taper for Pipe | Parallel for Pipes | Meter | Meter |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | High Hardness Steel (50-60 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] |
| Pitch (P), Number of Threading(mm) | 0.2 ～ 100 | 0.25 ～ 64 | 0.4 ～ 3.5 | 0.4 ～ 24 | 0.4 ～ 3 | - | 0.4 ～ 1.25 | 0.5 ～ 24 | 0.3 ～ 56 | 0.25 ～ 1.5 | - | 0.25 ～ 2 | 0.4 ～ 3.5 | 0.25 ～ 1 | 0.4 ～ 1 | 0.25 ～ 1.75 | 0.5 ～ 24 | - | - | 0.4 ～ 2.5 | 0.5 ～ 3.5 | 0.45 ～ 48 | 0.4 ～ 2 | - | 0.4 ～ 1.75 | 1.25 ～ 1.5 | - | 11 ～ 28 | 11 ～ 28 | 0.3 ～ 3 | 0.5 ～ 3 | 0.5 ～ 2 | 0.25 ～ 2 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | - | 1 ～ 1.75 | - | - | 0.3 ～ 0.5 | 0.2 ～ 1 |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel |
| Tap Type | Hand Tap | Spiral Tap | Hand Tap | Spiral Tap | Spiral Tap | Tap for pipes | Hand Tap | Hand Tap | Spiral Tap | Roll tap | Tap for pipes | Roll tap | Spiral Tap | Roll tap | Spiral Tap | Roll tap | Spiral Tap | Tap for pipes | Tap for pipes | Point tap | Hand Tap | Hand Tap | Hand Tap | Tap for pipes | Spiral Tap | Roll tap | Tap for pipes | Tap for pipes | Tap for pipes | Hand Tap | Spiral Tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Tap for pipes | Hand Tap | Tap for pipes | Tap for pipes | Hand Tap | Roll tap |
| Hole type | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 2.5P | 1.5P ～ 4P | 2.5P | 2.5P | 2.5P | 3P | 1.5P ～ 5P | 2.5P | 2P ～ 4P | 3P | 2P ～ 4P | 2.5P | 2P ～ 4P | 2.5P | 2P ～ 4P | 2.5P | 2.5P | 3.5P | 5P | 2.5P ～ 5P | 1.5P ～ 5P | 1.5P ～ 5P | 3P | 2.5P | 2P ～ 4P | 2.5P | 2.5P | 1.5P ～ 3.5P | 1.5P ～ 3P | 2.5P | 1.5P ～ 5P | 1.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 1.5P | 3P | 5P | 1P | 1P |
| Coating Type | - | - | - | - | - | - | - | - | - | - | - | - | - | TiN | - | TiCN | - | - | - | TiAlN | - | Non-Coated | Nitriding Treatment | - | TiN | - | - | - | - | - | - | Nitriding Treatment | - | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | - | TiN | - | - | - | TiCN |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | Available | NA | NA | NA | Available | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | Available | - | Available | Available | Available | Available | Available | Available | NA | Available | NA | NA | NA | Available |
| Overall Length (L)(mm) | 36 ～ 185 | 36 ～ 195 | 42 ～ 135 | 42 ～ 135 | 42 ～ 135 | 55 ～ 145 | 42 ～ 70 | 70 ～ 300 | 36 ～ 180 | 36 ～ 75 | 54 ～ 120 | 36 ～ 95 | 42 ～ 135 | 36 ～ 62 | 42 ～ 62 | 36 ～ 105 | 70 ～ 300 | 55 ～ 155 | 59 ～ 140 | 40 ～ 105 | 46 ～ 135 | 52 ～ 135 | 42 ～ 95 | 54 ～ 105 | 42 ～ 82 | 100 ～ 150 | 59 ～ 140 | 100 ～ 200 | 55 ～ 105 | 34 ～ 120 | 46 ～ 120 | 46 ～ 100 | 36 ～ 95 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 75 ～ 105 | 62 ～ 82 | 55 ～ 95 | 55 ～ 80 | 36 ～ 46 | 36 ～ 62 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- NPT-1-11-1-2
- No.0
- No.0UN
- NO.0-80UNF
- NO.10
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1"
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPT 1"
- NPTF1
- PF1
- PF 1
- PF 1"
- PS1
- PS 1
- PS 1"
- PT1
- PT1"
- PT 1
- PT 1"
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1"-12
- 1'-11.5
- 1'-11
- PF1-11
- PT1-11
- 1-8UNC
- 1"-8
- 1"-8UNC
- PS1-1/2
- PS1-1/4
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- NPT 1"1/2
- PF 1"1/2
- PS1"1/2
- PT1"1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PF 1"1/4
- PS1"1/4
- PT1"1/4
- PT 1 1/4
- PT 1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- PS1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1 1/16
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPT 1/2
- NPTF1/2
- PF1/2
- PF 1/2
- PS1/2
- PS 1/2
- PT1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20
- 1/2-20UNF
- 1/2-14
- PF1/2-14
- PT1/2-14
- 1/2-13
- 1/2-13UNC
- 1/2-12
- 1/2-12W
- 1/2(1/16'-1/2)
- 1/2W12
- 1/2 - 13
- 1/2 - 20
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1"3/4-5UNC
- 1 3/8
- 1"3/8UN
- G1"3/8
- PS1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNF
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPT 1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS1/4
- PS 1/4
- PT1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28
- 1/4-28UNF
- 1/4-20
- 1/4-20UNC
- 1/4-19
- PF1/4-19
- PT1/4-19
- 1/4-18
- 1/4(1/16'-1/4)
- 1/4 - 20
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- W1"7/8
- 1 7/8-8UN
- 1" - 8
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPT 1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-40W
- 1/8-28
- PF1/8-28
- PT1/8-28
- 1/8-27
- 1/8-18
- M1 to 10
- 1 12
- 1" - 12
- 1" - 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- NPT 1/16
- PT1/16
- PT 1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- M1.4
- S1.4
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- NPT 2"
- PF 2"
- PS 2
- PS 2"
- PT2"
- PT 2
- PT 2"
- R2
- Rp2
- W2
- W/2
- NO 2-56
- 2'-11.5
- 2'-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2'1/2-11
- W2"1/4
- 2'1/4-11
- 2~2.5
- 2 4.5
- M2 to 4.5
- M2.2
- M 2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- G3
- M3
- M3.0
- M 3
- M 3.0
- R3
- Rp3
- STI M3
- 3'-11
- PS3-8-19
- NPT3-8-18
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPT 3/4
- NPTF3/4
- PF3/4
- PF 3/4
- PS3/4
- PS 3/4
- PT3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16
- 3/4-16UNF
- 3/4-14
- PF3/4-14
- PT3/4-14
- 3/4-10
- 3/4-10UNC
- 3/4 - 10
- 3/4W10
- 3/4 - 16
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNF
- 3/8W
- G3/8
- NPS3/8
- NPT3/8
- NPT 3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PS 3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24
- 3/8-24UNF
- 3/8-19
- PF3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16
- 3/8-16UNC
- 3/8 - 16
- 3/8W16
- 3/8 - 24
- 3~10
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/16-32SM
- 3/16-24W
- 3/32
- SM3/32
- # 3 - 48
- # 3 - 56
- 3.5
- M3.5
- M3.5
- 4
- 4M
- G4
- M4
- M4.0
- M 4
- M 4.0
- R4
- Rp4
- STI M4
- NO 4-40
- M4 to 6
- M4 to 13
- # 4 - 40
- # 4 - 48
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- M 5
- M 5.0
- STI M5
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- PS5/8
- PT5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18
- 5/8-18UNF
- 5/8-14
- 5/8-11
- 5/8-11UNC
- 5/8 - 11
- 5/8W11
- 5/8 - 18
- M5 to 10
- M5-M12
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNF
- 5/16UNJ
- 5/16W
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24
- 5/16-24UNF
- 5/16-18
- 5/16-18UNC
- 5/16 - 18
- 5/16W18
- 5/16 - 24
- 5/32
- W5/32
- 5/32-36 UNC
- 5/32-32W
- # 5 - 40
- 5/64
- 5.5M
- M5.5
- M5.5
- 6
- M6
- M6.0
- M 6
- M 6.0
- STI M6
- No6-40UNF
- 6-32UNC
- NO 6-32
- M6 to 20
- # 6 - 32
- # 6 - 40
- M7
- M7.0
- M7
- M 7.0
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- PS7/8
- PT7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9
- 7/8-9UNC
- 7/8- 9
- 7/8W9
- 7/8- 14
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20
- 7/16-20UNF
- 7/16-14UNC
- 7/16 - 14
- 7/16W14
- 7/16 - 20
- 7/32
- SM7/32
- 7/32-24W
- 7/64
- 7.5
- 8
- #8
- M8
- M8.0
- M 8
- M 8.0
- STI M8
- 8-32UNC
- NO 8-32
- # 8 - 32
- # 8 - 36
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18
- 9/16-18UNF
- 9/16-12
- 9/16-12UNC
- 9/16 - 12
- 9/16 - 18
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- M10
- STI M10
- Tr 10
- 10-32UNF
- NO 10-32
- NO 10-24
- M10 to 13
- #10 - 24
- M10 to 25
- #10 - 32
- M11
- M11
- PG11
- 11/2
- NPT 11/2
- PF 11/2
- PS 11/2
- PT 11/2
- 11/4
- NPT 11/4
- PF 11/4
- PS 11/4
- PT 11/4
- 11/8
- 11/16
- 11~24
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- M12
- STI M12
- Tr 12
- 12-1.0-2
- #12 - 24
- M13
- 13/4
- 13/8
- 13/16
- 13/32
- PG13.5
- 14
- M14
- M14.0
- M14
- Tr 14
- M15
- 15/8
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- M17
- 17/8
- 17/16
- 17/32
- 17/64
- 18
- M18
- M18.0
- M18
- Tr 18
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20.0
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22.0
- M22
- M22X
- Tr 22
- 22-1.0
- M23
- 24
- M24
- M24.0
- M24
- M24X
- Tr 24
- 24-2.0-2
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- M27
- M27.0
- 27~36
- M28
- Tr 28
- PG29
- 30
- M30
- M30.0
- Tr 30
- M32
- 33
- M33
- M34
- M35
- 36
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1-1/8-7~1-1/26
- 1.058
- 1.2
- 1.25
- 1.27
- 1.5
- 1.7
- 1.75
- 2
- 2-56~8-32
- 2.5
- 3
- 3/8-16~1-8
- 3.5
- 4
- 4 1/2 UNC
- 4.5
- 5
- 5 UNC
- 5.5
- 6
- 6 UNC
- 7
- 7 UNC
- 8
- 8 UNC
- 8 UNS
- 8DØ
- 8J UNS
- 9
- 9 UNC
- 10
- 10 UNC
- 10-24~5/16-18
- 10、11、12、14、16、18、20、24F
- 11
- 11 UNC
- 11 1/2
- 11 1/2DØ
- 11.5
- 12
- 12 UNF
- 12 UNS
- 13
- 13 UNC
- 14
- 14 UNC
- 14 UNF
- 14 UNS
- 14DØ
- 16
- 16 UNC
- 16 UNF
- 16UNC
- 18
- 18 UNC
- 18 UNF
- 18DØ
- 19
- 20
- 20 UNC
- 20 UNF
- 20UNC
- 24
- 24 UNF
- 27
- 27DØ
- 28
- 28 UNF
- 32
- 32UNC
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 100
- 150
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- SKS
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy