(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
YAMAWA MFG Screw-Hole-Related Tools（Screw size (Nominal)：M5）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
73 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Hand tap used for general tapping work.[Features]・ High blade tip strength makes it easy for regrinding.・ More suitable for manual work compared to taps of other shapes.・ 2 types are available, with 5P or 1.5P chamfered threads.・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.・ Machining with mechanical machinery is also possible.・ Has straight grooves out of consideration for cutting chip stow.・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.[Applications]・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.5 ～ 0.9 High-speed steel Hand Tap For through hole / For blind hole 1.5P ～ 5P - NA 60 Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Stainless Steels_SU-HT
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.· Capable of machining both synchronously and asynchronously.· Machining speed of 5 m/min or less is recommended.[Applications]Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] 0.8 High-speed steel Hand Tap For through hole / For blind hole 1.5P ～ 4P - NA 60 From: 208,129 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.5 ～ 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 144,870 VND Special Price Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Die D for Metric Threads
YAMAWA MFG
Solid die with improved die runout precision.[Features]· High-speed tool steel (HSS) is adopted, realizing stable machining.· The front surface is the surface with a marking on the chamfering.· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.· Solves problems particular to adjustable type dies, realizing high precision screw machining.[Applications]· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.· Combining with NC tooling enables machining with a MC.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter - 0.5 ～ 0.8 High-speed steel Die - - - NA - From: 762,163 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Hard-to-Machine Materials_EH-HT
YAMAWA MFG
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] 0.8 Cobalt HSS Hand Tap For through hole / For blind hole 2.5P ～ 5P - NA 60 From: 181,830 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Cast Irons_FC-HT
YAMAWA MFG
[Features]· Suitable for thread machining with brittle and hard materials such as cast iron, designed appropriately oversized to handle rapid wear.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] 0.8 High-speed steel Hand Tap For through hole / For blind hole 1.5P Nitriding Treatment Available 60 From: 229,201 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 100 ～ 150 From: 283,784 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Stainless Steels_SU+PO
YAMAWA MFG
Point tap for through-hole machining with extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] 0.8 ～ 0.9 High-speed steel Point tap For through hole 5P - NA 60 From: 135,136 VND Special Price Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps, Oxidized_SP-OX
YAMAWA MFG
Spiral taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.· Oxide treatment also removes residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 150,371 VND Days to Ship: Số ngày giao hàng: 10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.[Features]· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.· Minimal scrap issues.· Low cutting torque.· Capable of machining both synchronously and asynchronously.[Applications]· Ideal for machining through-holes.* N-PO models will transition to PO as soon as stock runs out.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.5 ～ 0.8 High-speed steel Point tap For through hole 5P - NA 60 From: 144,473 VND Special Price Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Roll Taps for Dry Tapping, Coated_OL+RZ
YAMAWA MFG
It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 Powder high-speed steel Roll tap For through hole 4P TiCN Available 60 From: 421,378 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps, Oxidized_PO-OX
YAMAWA MFG
Point taps with oxide treatment (OX).[Features]· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil, reducing frictional resistance.· This prevents parts welding together and improves the finished surface roughness of the female thread.· Oxide treatment is also effective for removing residual stress from the tap, extending the life span.[Applications]· Ideal for machining easily welded materials such as stainless steel or low carbon steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○/◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] 0.8 High-speed steel Point tap For through hole 5P - NA 60 From: 120,394 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Thermosetting_PL1
YAMAWA MFG
Especially suitable for thermosetting resins where tapping is more difficult than other synthetic resins.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] 0.8 High-speed steel Hand Tap For through hole / For blind hole 3P - NA 60 From: 263,150 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP
YAMAWA MFG
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.[Features]· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.· Completely threaded to prevent the blade from chipping.· Reduction of friction resistance and tapping torque.· Maintains screw guidance (stable machining).· Maintains excellent chip discharge performance (smooth discharge).[Applications]· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.· Ideal for water soluble cutting fluids.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P TiN Available 60 From: 458,553 VND Special Price Days to Ship: Số ngày giao hàng: 5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels_SU+SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.[Features]· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.· Stable scrap is ejected and a good finish is realized.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]Optimal for machining extremely viscous or work-hardened work material.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] 0.8 ～ 0.9 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 203,175 VND Special Price Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Aluminum_AL+SP
YAMAWA MFG
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.[Features]· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.· Stable, clean thread machining can be performed.[Applications]· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 ～ 62 From: 254,170 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Left Hand Threads_SP-LH
YAMAWA MFG
* N-SP(LH) will switch to SP(LH) as soon as the stock runs out.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 230,050 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
High Performance Roll Taps, Coated_HP+RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 unified Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 Powder high-speed steel Roll tap For through hole / For blind hole 2P ～ 4P TiCN Available 60 From: 535,864 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Solid Dies (for left-hand threads) D LH for Metric Threads
YAMAWA MFG
Solid die for left-handed threads with improved die runout precision.[Features]· High-speed tool steel (HSS) is adopted, realizing stable machining.· The front surface is the surface with a marking on the chamfering.· The rear is sunk so that the end face makes close contact when the holder is attached.· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.· Enables hand turned use or use with machinery.· Solves problems particular to adjustable type dies, realizing high precision male screw machining.[Applications]· Ideal for male thread machining with iron or light metals.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter - 0.5 ～ 0.8 High-speed steel Die - - - NA - From: 1,581,015 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI
YAMAWA MFG
Hand tap for machining female threads for inserting insert coils.[Features]· Blade designed to be ideal for aluminum type work materials, enabling stable female thread machining to be performed.· 2 types are available, with 5P or 1.5P biting threads, to suit the application used.· Screw precision in accordance with class 1b.· Work material: Aluminum rolled material, aluminum alloy casting, zinc alloy casting.[Applications]Ideal for machining female threads for inserting insert coils after threading.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] 0.8 High-speed steel Hand Tap For through hole / For blind hole 1.5P ～ 5P Non-Coated - 62 From: 338,450 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Die Cast Materials_LA-HT
YAMAWA MFG
[Features]· An oversize tap suitable for female thread cutting in materials that tend to contract, such as aluminum alloy diecast (ADC) and zinc alloy diecast (ZDC).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] 0.8 High-speed steel Hand Tap For through hole / For blind hole 1.5P ～ 5P Nitriding Treatment Available 60 From: 270,713 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps_+SP
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 156,090 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Short Spiral Fluted Taps, Deep Hole Use_S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.[Features]· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.· Oxide treatment (OX treatment) applied to prevent welding.[Applications]· Optimal for deep thread machining to 2.5 times the nominal diameter or more.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 230,555 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps 1.5P_SP-1.5P
YAMAWA MFG
■ The SP 1.5P has a shorter cutting chamferthan usual and there is no convex center atthe end. This makes it the best spiral flute tapfor machining a blind hole that does not havethe pilot hole length for processing the threadlength.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] 0.8 High-speed steel Spiral Tap For blind hole 1.5P - - 60 From: 221,231 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A roll tap suitable for threading steel materials (carbon steel, alloy steel, stainless steel, etc.).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] 0.5 ～ 0.8 High-speed steel Roll tap For through hole / For blind hole 2P ～ 4P - NA 60 From: 185,505 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D
YAMAWA MFG
Solid die for difficult-to-cut materials, such as stainless steel, etc.[Features]· Adopts high-speed tool steel (HSS).· Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.· The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.· Stable male threading can be performed.· Solid type with minimal variation even under harsh cutting condition specifications.[Applications]· Optimal for machining stainless steel and other difficult-to-cut materials.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter - 0.5 ～ 0.8 High-speed steel Die - - - NA - From: 1,228,818 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Z-PRO Coated Spiral Pointed Taps
YAMAWA MFG
Z-PRO Coated Spiral Pointed Taps[Features]Durability is improved by premium powder HSS and special coating.Chip ejection efficiency is improved and cutting resistance is reduced by the unique cutting edge shape, achieving a good internal thread and long tool life.Proper tool projection length is secured, achieving a good supply of water soluble cutting fluid.This is most suitable for tapping with water soluble cutting fluid.[Specifications]SIze: M2x0.4Class: P2Chamfer: 5PL: 45mmℓ: 8mmℓn: 15mmℓs: 27mmDs: 3mmK: 2.5mmℓk: 5mmNo.of flutes: 2[Material]General, Stainless steel, SUSDetails: Steel alloy, SCM, ideal
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Stainless steel (SUS)[○] - Powder high-speed steel Point tap For through hole - Other - 70 From: 522,353 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP
YAMAWA MFG
[Features]· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 333,186 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-LH
YAMAWA MFG
Point tap suitable for machining through holes.[Features]· The grooves on the cutting edge side of the biting part are cut obliquely to push the chips forward.· Causes less trouble due to chips.· The cutting torque is low.[Applications]· Can process both synchronously and asynchronously.· Suitable for drilling through holes.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Point tap For through hole 5P - NA 60 From: 309,680 VND Days to Ship: Số ngày giao hàng: 22 Day(s)
22 Day(s)
-
You can add up to 6 items per a category to the compare list.
Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S
YAMAWA MFG
5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter - 0.5 ～ 0.8 High-speed steel Thread-cutting-related tool For through hole / For blind hole - - NA 65 From: 648,730 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide taps for ultra hard materials_UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter High Hardness Steel (50-60 HRC)[○] 0.8 Carbide Point tap For through hole / For blind hole 5P TiAlN Available 60 From: 2,203,068 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Soft Structural Steels_E-SP
YAMAWA MFG
A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 60 From: 233,981 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO
YAMAWA MFG
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○] 0.8 Cobalt HSS Point tap For through hole 4.5P - NA 60 From: 299,720 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Z-PRO Coated Spiral Fluted Taps
YAMAWA MFG
Coated Spiral Fluted Taps[Features]Durability is improved by premium powder HSS and special coating.Chip ejection efficiency is improved and cutting resistance is reduced by the unique cutting edge shape, achieving a good internal thread and long tool life.Proper tool projection length is secured, preventing chips from interfering with the holder.This is most suitable for tapping with water soluble cutting fluid.[Specifications]Tapping conditions [Ｍ3×0.5]Tapping Length: 4.5mmTapping Speed: 20m/minMachine: Machining center, vertical typeTapping Fluid: Water soluble cutting fluid[Materials]This is compatible with a wide range of steel work materials including general structural steel, carbon steel, and alloy steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Stainless steel (SUS)[○] - Powder high-speed steel Spiral Tap For blind hole - Other - 70 From: 522,353 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-V
YAMAWA MFG
Coated point tap suitable for low carbon steel to high carbon steel machining.[Features]· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Point tap For through hole 5P TiN Available 60 From: 444,782 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
A coating roll tap suitable for threading steel and nonferrous materials.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Roll tap For through hole / For blind hole 2P ～ 4P TiN Available 60 From: 377,150 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Titanium Alloys_ZET-B
YAMAWA MFG
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] 0.8 Powder high-speed steel Spiral Tap For blind hole 3P - NA 60 From: 420,125 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Straight nut tap mainly used for machining nuts using a tapping machine.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter - 0.8 High-speed steel Point tap For through hole 29P - NA 110 From: 719,853 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Nickel Base Alloys_ZEN-P
YAMAWA MFG
A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] 0.8 Powder high-speed steel Point tap For through hole 4.5P - NA 60 From: 420,125 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Threading with plastic processing does not generate chips and produces high-precision threads with a clean finish without any problems or blade chipping troubles.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter - 0.5 High-speed steel Die - - - NA - From: 5,008,873 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps, Coated_LS-SP-V
YAMAWA MFG
* LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P - NA 100 From: 759,488 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Pointed Taps, Coated_LS-PO-V
YAMAWA MFG
* LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Point tap For through hole 5P TiN Available 100 From: 759,488 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Taps for Hard Materials_EH-CT
YAMAWA MFG
Ideal for tapping of high-hardness steel of 45 to 55 HRC, such as steel for hot-rolled dies (SKS3, SKD11, etc.). We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Quenched and tempered steel (45 to 55 HRC)[○] 0.8 Carbide Point tap For through hole / For blind hole 5P TiAlN Available 60 From: 2,466,771 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL
YAMAWA MFG
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For through hole 5P TiN Available 60 From: 566,552 VND Days to Ship: Số ngày giao hàng: 5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping_F-SP
YAMAWA MFG
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
Screw size (Nominal) Screw Types work material Pitch (P), Number of Threading(mm) Tool Material Type Tap Type Hole type Chamfer threads (Lcf) Coating Type Coating Y/N Overall Length (L)(mm) M5 Meter Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] 0.8 High-speed steel Spiral Tap For blind hole 2.5P TiN Available 60 From: 602,511 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.       | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product SeriesDòng sản phẩm | Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP | Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI | Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP | Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S | Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL | ||||||||||||||||||||||||||||||||||||||||
| From | - | 208,129 VND Special Price On Sale Till 31/03/2025 | 144,870 VND Special Price On Sale Till 31/03/2025 | 762,163 VND- | 181,830 VND Special Price On Sale Till 31/03/2025 | 229,201 VND | 283,784 VND- | 135,136 VND Special Price On Sale Till 31/03/2025 | 150,371 VND | 144,473 VND Special Price On Sale Till 31/03/2025 | 421,378 VND- | 120,394 VND- | 263,150 VND | 458,553 VND Special Price On Sale Till 31/03/2025 | 203,175 VND Special Price On Sale Till 31/03/2025 | 254,170 VND- | 230,050 VND | 535,864 VND- | 1,581,015 VND- | 338,450 VND | 270,713 VND | 156,090 VND | 230,555 VND- | 221,231 VND | 185,505 VND- | 1,228,818 VND- | 522,353 VND- | 333,186 VND | 309,680 VND | 648,730 VND- | 2,203,068 VND | 233,981 VND | 299,720 VND | 522,353 VND- | 444,782 VND | 377,150 VND- | 420,125 VND | 719,853 VND | 420,125 VND | 5,008,873 VND | 759,488 VND | 759,488 VND | 2,466,771 VND | 566,552 VND | 602,511 VND |
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | 9 Day(s) or more | 6 Day(s) or more | Same day or more | 9 Day(s) | 4 Day(s) or more | 8 Day(s) or more | 10 Day(s) | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day | 5 Day(s) | 5 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 7 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 4 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 22 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 5 Day(s) | 8 Day(s) or more |
| Screw size (Nominal) | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 | M5 |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○/◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] | Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | Stainless steel (SUS)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | High Hardness Steel (50-60 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○] | Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] |
| Pitch (P), Number of Threading(mm) | 0.5 ～ 0.9 | 0.8 | 0.5 ～ 0.8 | 0.5 ～ 0.8 | 0.8 | 0.8 | 0.8 | 0.8 ～ 0.9 | 0.8 | 0.5 ～ 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 ～ 0.9 | 0.8 | 0.8 | 0.8 | 0.5 ～ 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.5 ～ 0.8 | 0.5 ～ 0.8 | - | 0.8 | 0.8 | 0.5 ～ 0.8 | 0.8 | 0.8 | 0.8 | - | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.5 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | Cobalt HSS | Powder high-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel |
| Tap Type | Hand Tap | Hand Tap | Spiral Tap | Die | Hand Tap | Hand Tap | Spiral Tap | Point tap | Spiral Tap | Point tap | Roll tap | Point tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Roll tap | Die | Hand Tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Roll tap | Die | Point tap | Spiral Tap | Point tap | Thread-cutting-related tool | Point tap | Spiral Tap | Point tap | Spiral Tap | Point tap | Roll tap | Spiral Tap | Point tap | Point tap | Die | Spiral Tap | Point tap | Point tap | Spiral Tap | Spiral Tap |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | For through hole | For through hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | - | For through hole | For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | For through hole | For through hole | - | For blind hole | For through hole | For through hole / For blind hole | For through hole | For blind hole |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 1.5P ～ 4P | 2.5P | - | 2.5P ～ 5P | 1.5P | 2.5P | 5P | 2.5P | 5P | 4P | 5P | 3P | 2.5P | 2.5P | 2.5P | 2.5P | 2P ～ 4P | - | 1.5P ～ 5P | 1.5P ～ 5P | 2.5P | 2.5P | 1.5P | 2P ～ 4P | - | - | 2.5P | 5P | - | 5P | 2.5P | 4.5P | - | 5P | 2P ～ 4P | 3P | 29P | 4.5P | - | 2.5P | 5P | 5P | 5P | 2.5P |
| Coating Type | - | - | - | - | - | Nitriding Treatment | - | - | - | - | TiCN | - | - | TiN | - | - | - | TiCN | - | Non-Coated | Nitriding Treatment | - | - | - | - | - | Other | - | - | - | TiAlN | - | - | Other | TiN | TiN | - | - | - | - | - | TiN | TiAlN | TiN | TiN |
| Coating Y/N | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | Available | NA | NA | Available | NA | NA | NA | Available | NA | - | Available | NA | NA | - | NA | NA | - | NA | NA | NA | Available | NA | NA | - | Available | Available | NA | NA | NA | NA | NA | Available | Available | Available | Available |
| Overall Length (L)(mm) | 60 | 60 | 60 | - | 60 | 60 | 100 ～ 150 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 ～ 62 | 60 | 60 | - | 62 | 60 | 60 | 60 | 60 | 60 | - | 70 | 60 | 60 | 65 | 60 | 60 | 60 | 70 | 60 | 60 | 60 | 110 | 60 | - | 100 | 100 | 60 | 60 | 60 |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- NPT-1-11-1-2
- No.0
- No.0UN
- NO.0-80UNF
- No.10
- No.1
- No.1UN
- No.10UN
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1"
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPT 1"
- NPTF1
- PF1
- PF 1
- PF 1"
- PS1
- PS 1
- PS 1"
- PT1
- PT1"
- PT 1
- PT 1"
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1"-12
- 1'-11.5
- 1'-11
- PF1-11
- PT1-11
- 1-8UNC
- 1"-8
- 1"-8UNC
- PS1-1/2
- PS1-1/4
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- NPT 1"1/2
- PF 1"1/2
- PS1"1/2
- PT1"1/2
- PT 1 1/2
- R1"1/2
- W1"1/2
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PF 1"1/4
- PS1"1/4
- PT1"1/4
- PT 1 1/4
- PT 1"1/4
- R1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- PS1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1 1/16
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- NPS1/2
- NPT1/2
- NPT 1/2
- NPTF1/2
- PF1/2
- PF 1/2
- PS1/2
- PS 1/2
- PT1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20
- 1/2-20UNF
- 1/2-14
- PF1/2-14
- PT1/2-14
- 1/2-13
- 1/2-13UNC
- 1/2-12
- 1/2-12W
- 1/2(1/16'-1/2)
- 1/2W12
- 1/2 - 13
- 1/2 - 20
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1"3/4-5UNC
- 1 3/8
- 1"3/8UN
- G1"3/8
- PS1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNJ
- G1/4
- NPS1/4
- NPT1/4
- NPT 1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS1/4
- PS 1/4
- PT1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28
- 1/4-28UNF
- 1/4-20
- 1/4-20UNC
- 1/4-19
- PF1/4-19
- PT1/4-19
- 1/4-18
- 1/4(1/16'-1/4)
- 1/4 - 20
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- W1"7/8
- 1 7/8-8UN
- 1" - 8
- 1'W8
- 1/8
- G1/8
- NPS1/8
- NPT1/8
- NPT 1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-40W
- 1/8-28
- PF1/8-28
- PT1/8-28
- 1/8-27
- 1/8-18
- M1 to 10
- 1 12
- 1" - 12
- 1" - 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- NPT 1/16
- PT1/16
- PT 1/16
- R1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- M1.4
- S1.4
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- NPT 2"
- PF 2"
- PS 2
- PS 2"
- PT2"
- PT 2
- PT 2"
- R2
- W2
- W/2
- NO 2-56
- 2'-11.5
- 2'-11
- 2-8UN
- 2'1/2-11
- W2"1/4
- 2'1/4-11
- 2~2.5
- 2 4.5
- M2 to 4.5
- M2.2
- M 2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- M3
- M3.0
- M 3
- M 3.0
- STI M3
- 3'-11
- PS3-8-19
- NPT3-8-18
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPT 3/4
- NPTF3/4
- PF3/4
- PF 3/4
- PS3/4
- PS 3/4
- PT3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16
- 3/4-16UNF
- 3/4-14
- PF3/4-14
- PT3/4-14
- 3/4-10
- 3/4-10UNC
- 3/4 - 10
- 3/4W10
- 3/4 - 16
- 3/8
- 3/8-UNJ
- 3/8UN
- G3/8
- NPS3/8
- NPT3/8
- NPT 3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PS 3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24
- 3/8-24UNF
- 3/8-19
- PF3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16
- 3/8-16UNC
- 3/8 - 16
- 3/8W16
- 3/8 - 24
- 3~10
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/16-32SM
- 3/16-24W
- 3/32
- SM3/32
- # 3 - 48
- # 3 - 56
- 3.5
- M3.5
- M3.5
- 4
- 4M
- M4
- M4.0
- M 4
- M 4.0
- STI M4
- NO 4-40
- M4 to 6
- M4 to 13
- # 4 - 40
- # 4 - 48
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- M 5
- M 5.0
- STI M5
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- PS5/8
- PT5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18
- 5/8-18UNF
- 5/8-14
- 5/8-11
- 5/8-11UNC
- 5/8 - 11
- 5/8W11
- 5/8 - 18
- M5 to 10
- M5-M12
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNJ
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24
- 5/16-24UNF
- 5/16-18
- 5/16-18UNC
- 5/16 - 18
- 5/16W18
- 5/16 - 24
- 5/32
- W5/32
- 5/32-36 UNC
- 5/32-32W
- # 5 - 40
- 5/64
- 5.5M
- M5.5
- M5.5
- 6
- M6
- M6.0
- M 6
- M 6.0
- STI M6
- No6-40UNF
- 6-32UNC
- NO 6-32
- M6 to 20
- # 6 - 32
- # 6 - 40
- M7
- M7.0
- M7
- M 7.0
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- PS7/8
- PT7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9
- 7/8-9UNC
- 7/8- 9
- 7/8W9
- 7/8- 14
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20
- 7/16-20UNF
- 7/16-14UNC
- 7/16 - 14
- 7/16W14
- 7/16 - 20
- 7/32
- SM7/32
- 7/32-24W
- 7/64
- 7.5
- 8
- #8
- M8
- M8.0
- M 8
- M 8.0
- STI M8
- 8-32UNC
- NO 8-32
- # 8 - 32
- # 8 - 36
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18
- 9/16-18UNF
- 9/16-12
- 9/16-12UNC
- 9/16 - 12
- 9/16 - 18
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- M10
- STI M10
- Tr 10
- 10-32UNF
- NO 10-32
- NO 10-24
- M10 to 13
- #10 - 24
- M10 to 25
- #10 - 32
- M11
- M11
- PG11
- 11/2
- NPT 11/2
- PF 11/2
- PS 11/2
- PT 11/2
- 11/4
- NPT 11/4
- PF 11/4
- PS 11/4
- PT 11/4
- 11/8
- 11/16
- 11~24
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- M12
- STI M12
- Tr 12
- 12-1.0-2
- #12 - 24
- M13
- 13/4
- 13/8
- 13/16
- 13/32
- PG13.5
- 14
- M14
- M14.0
- M14
- Tr 14
- M15
- 15/8
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- M17
- 17/8
- 17/16
- 17/32
- 17/64
- 18
- M18
- M18.0
- M18
- Tr 18
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20.0
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22.0
- M22
- M22X
- Tr 22
- 22-1.0
- M23
- 24
- M24
- M24.0
- M24
- M24X
- Tr 24
- 24-2.0-2
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- M27
- M27.0
- 27~36
- M28
- Tr 28
- PG29
- 30
- M30
- M30.0
- Tr 30
- M32
- 33
- M33
- M34
- M35
- 36
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.8
- 0.9
- 1
- 1-1/8-7~1-1/26
- 1.2
- 1.25
- 1.5
- 1.7
- 1.75
- 2
- 2-56~8-32
- 2.5
- 3
- 3/8-16~1-8
- 3.5
- 4
- 4 1/2 UNC
- 4.5
- 5
- 5 UNC
- 5.5
- 6
- 6 UNC
- 7
- 7 UNC
- 8
- 8 UNC
- 8 UNS
- 8DØ
- 8J UNS
- 9
- 9 UNC
- 10
- 10 UNC
- 10-24~5/16-18
- 10、11、12、14、16、18、20、24F
- 11
- 11 UNC
- 11 1/2
- 11 1/2DØ
- 11.5
- 12
- 12 UNF
- 12 UNS
- 13
- 13 UNC
- 14
- 14 UNC
- 14 UNF
- 14 UNS
- 14DØ
- 16
- 16 UNC
- 16 UNF
- 16UNC
- 18
- 18 UNC
- 18 UNF
- 18DØ
- 19
- 20
- 20 UNC
- 20 UNF
- 20UNC
- 24
- 24 UNF
- 27
- 27DØ
- 28
- 28 UNF
- 32
- 32UNC
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 100
- 150
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- SKS
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy