Clutches, Brakes（Function：Controller）

• You can add up to 6 items per a category to the compare list. Compare

  

  Permanent Wave Hysterics Torque Controller

  OGURA CLUTCH

  Can save energy because it does not require an outside power supply or wiring. A long type with no areas that can incur abrasion due to the mechanical non-contact structure, which makes maintenance easy.

  CAD ：

  2D

  Function	Type	Operating Condition	Max. Operating Rotational Speed(rpm)	Rated Torque (Range)(N･m)
  Controller	Magnets	Dry	700 ～ 10000	0.1 ~ 30 / Less Than 0.1

  From: 5,069,381 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fixed Current Controller

  OGURA CLUTCH

  The powder and hysteresis type clutch and brake run based on energization, so the torque will fluctuate if the current values fluctuate when using general low voltage controls. The constant current controls require resistance values to be set for the load that is connect to the controller.

  Function	Type	Operating Condition	Max. Operating Rotational Speed(rpm)	Rated Torque (Range)(N･m)
  Controller	-	-	-	-

  From: 5,277,353 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tension Controller for Feedback

  OGURA CLUTCH

  Compares the set values with the tensile strength measured by the tensile strength detector and then eliminates any differences by adding torque (current value) to the powder or hysteresis type clutch, which allows it to suppress fluctuation in tensile strength resulting from reel diameter or disturbances.

  Function	Type	Operating Condition	Max. Operating Rotational Speed(rpm)	Rated Torque (Range)(N･m)
  Controller	-	-	-	-

  From: 12,193,990 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tension Setting Device for CTP

  OGURA CLUTCH

  The CTP1200/3200 operation has a run setting that calculates the reel diameter from the pulse signal input for each rotation and each set value and changes the control output to maintain a constant tensile strength, a stop setting that retains the previous control output, and a Sakae motor off setting that blocks control output.

  Function	Type	Operating Condition	Max. Operating Rotational Speed(rpm)	Rated Torque (Range)(N･m)
  Controller	-	-	-	-

  From: 9,752,716 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Function
Type
Operating Condition
Max. Operating Rotational Speed(rpm)
Rated Torque (Range)(N･m)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OGURA CLUTCH	OGURA CLUTCH	OGURA CLUTCH	OGURA CLUTCH
Product SeriesDòng sản phẩm	Permanent Wave Hysterics Torque Controller	Fixed Current Controller	Tension Controller for Feedback	Tension Setting Device for CTP
CADCAD	2D
From	5,069,381 VND	5,277,353 VND	12,193,990 VND	9,752,716 VND
Days to ShipSố ngày giao hàng	7 Day(s) or more	4 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Function	Controller	Controller	Controller	Controller
Type	Magnets	-	-	-
Operating Condition	Dry	-	-	-
Max. Operating Rotational Speed(rpm)	700 ～ 10000	-	-	-
Rated Torque (Range)(N･m)	0.1 ~ 30 / Less Than 0.1	-	-	-

Loading...Tải…