Keyless Bushing (Fastening Fittings)（Body Material：Steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  MechaLock - Standard (Centering Function)

  MISUMI

  It comes in a wide variety of sizes, materials, and surface treatments, and has a centering function.

  • Volume Discount

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	5 ～ 70	16 ～ 97	Steel	2.0~20.0 ～ 3000.1~10000.0	Provided	None / Black Oxide / Electroless Nickel Plating	Single Cone Type	Mechanical Type (Wedge Type)	4.6 ～ 3400

  From: 619,900 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Lock, AS Series

  TSUBAKIMOTO CHA

  A keyless bushing (fastening joint) that connects the shaft and boss without using a key.[Features]·Strong fastening is possible just by tightening the tightening bolt.·A general-purpose type that is easy to install and remove.·Key processing, spline processing, press fitting, shrink fitting, etc. are not required at all.·A wide variety of sizes are available, and it is also compatible with large diameter shafts.·Selectable depending on the application.·Stainless steel, electroless nickel plating, and inch sizes are also available.[Applications]·Ideal for timing pulleys, cams, etc. where fine angle adjustment is required.·Convenient for places where it is necessary to put on and take off.·Ideal for industrial printers, machine tools, etc.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	19 ～ 200	47 ～ 260	Steel	200.1~300.0 ～ 10000.1~300000.0	None	None	Double Cone Type	Mechanical Type (Wedge Type)	294 ～ 60600

  From: 1,440,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power lock keyless bushing A.P.LOCK SAPL-D1 series

  SUNGIL

  [Features] · Most General Shaft-hub Combining Structure · Recommended Shaft Outer Diameter Tolerance: h8 · Recommended Hub Inner Diameter Tolerance: H8

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	18 ～ 200	47 ～ 260	Steel	-	-	None	-	Mechanical Type (Wedge Type)	240 ～ 63342

  From: 517,214 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  MechaLock - Straight

  MISUMI

  The maximum permissible torque is higher than the standard type, and it securely locks the shaft and hub.

  • Volume Discount

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	55 ～ 60	85 ～ 90	Steel	1000.1~3000.0	None	Electroless Nickel Plating	Double Cone Type	Mechanical Type (Wedge Type)	2530 ～ 2760

  From: 2,543,351 VND
  Special Price
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Keyless bushing A.P.LOCK SAPL-A Series

  SUNGIL

  [Features]·Self-centering function: Prevents fine off-centering·Small diameter difference between inner diameter (d) and outer diameter (D), low surface pressure allows installation on small hubs·Inner diameter standardized from ⌀5 to ⌀50·Simple in concept and easy to assemble·Stainless steel material (vacuum environment) or electroless nickel plating (corrosion prevention) product can be selected depending on the usage environment.

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	5 ～ 50	16 ～ 72	Steel	2.0~20.0 ～ 1000.1~3000.0	Provided	None	Single Cone Type	Mechanical Type (Wedge Type)	7 ～ 1500

  From: 518,395 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MechaLock - Overview - Thin

  MISUMI

  Because the bolt is attached directly to the hub, the difference between the inside and outside diameters is small and the walls are thin. Can be attached to small hubs.

  • Volume Discount

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Direct Mounting	5 ～ 30	8 ～ 35	Steel	2.0~20.0 ～ 100.1~150.0	None	None	Single Cone Type	Mechanical Type (Wedge Type)	4.2 ～ 149

  From: 635,159 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Lock, KE Series

  TSUBAKIMOTO CHA

  A keyless bushing that connects the shaft and boss without using a key.[Features]·Since it is compatible with a wide range of tolerance shafts (other than KP specifications), it is possible to use standard products for plus tolerance shafts such as servo motors.·It has a centering function.·With a product lineup starting from small diameter shafts, it is ideal for fastening the output shafts of small stepping motors and servo motors.·Stainless steel specifications (SS) and electroless nickel plating specifications (KP) do not require the application of oil or grease during assembly.·Compared to the AE series, the inner/outer diameter ratio is smaller, allowing for a more compact design.·Low surface pressure specifications that can be used for small diameter bosses are also available.[Applications]·Ideal for timing pulleys, cams, etc. where fine angle adjustment is required.·It is convenient for places where detachment is required, such as when mounting directly on the motor shaft.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	10 ～ 19	23 ～ 33	Steel	20.1~50.0 ～ 100.1~150.0	Provided	None	Single Cone Type	Mechanical Type (Wedge Type)	31.4 ～ 120

  From: 1,517,693 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MechaLock - Straight for High Torque

  MISUMI

  The axial length has been extended compared to the straight type, allowing it to handle higher loads.

  • Volume Discount

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	30 ～ 65	55 ～ 95	Steel	1000.1~3000.0 ～ 3000.1~10000.0	None	None	Double Cone Type	Mechanical Type (Wedge Type)	1110 ～ 6400

  From: 2,360,686 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Clamp Element Model SCE300

  SANKI

  Mounting space has been extremely reduced in a radial direction. Great torque transmission can also be produced by using up to 4 units in arrangement.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Sleeve	10 ～ 60	13 ～ 68	Steel	2.0~20.0 ～ 700.1~1000.0	None	None	Tapered Sleeve Type	Mechanical Type (Wedge Type)	6.9 ～ 725

  From: 269,175 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  MechaLock MA Standard Type)

  ISEL

  [Features]· 34 models that have shaft diameters standardized from ø5 to ø85.· Centering function suppresses outer circumference and terminal surface run-out.· Loose design of slope angle degrees produces a self-locking effect.· Hub internal diameter can be used with pass-through machining.· Wide range of hub options with thin walls and low surface pressure

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	5 ～ 80	16 ～ 107	Steel	2.0~20.0 ～ 3000.1~10000.0	Provided	None	Single Cone Type	Mechanical Type (Wedge Type)	7 ～ 4100

  From: 736,382 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MechaLock - Compact (Centering Function)

  MISUMI

  [Features]It has a centering function and is suitable for a smaller hub.

  • Volume Discount

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Thin Wall	5 ～ 50	12 ～ 65	Steel	2.0~20.0 ～ 1000.1~3000.0	Provided	None / Electroless Nickel Plating	Single Cone Type	Mechanical Type (Wedge Type)	9 ～ 2120

  From: 708,143 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Lock, AE Series

  TSUBAKIMOTO CHA

  A friction type fastener that fastens the shaft and boss without using a key or the like.[Features]·This series has the same inner and outer diameters as the general-purpose AS series and has a centering function.·Since no centering guide is required, the boss hole can be straight, eliminating the need for troublesome centering guide processing.·It has a simple structure consisting of three parts: an inner ring, an outer ring, and a tightening bolt.[Applications]·Machine tool build-in servo motor shafts, tool change arms, etc.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	19 ～ 110	47 ～ 155	Steel	200.1~300.0 ～ 10000.1~300000.0	Provided	None	Single Cone Type	Mechanical Type (Wedge Type)	265 ～ 11400

  From: 2,797,846 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Keyless bushing A.P.LOCK SAPL-B Series

  SUNGIL

  [Features] · Self-centering Capability: Minimal Off-centering Prevention. ·The outer diameter of the cover is larger than that of the SAPL-A type, and the bolt size is larger, which makes it relatively durable compared to the same inner diameter.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	8 ～ 30	22 ～ 55	Steel	2.0~20.0 ～ 500.1~700.0	Provided	None	Single Cone Type	Mechanical Type (Wedge Type)	18 ～ 510

  From: 680,316 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mechanical Lock MT General Purpose Type

  ISEL

  No drag when connecting for easy removal

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	19 ～ 70	47 ～ 110	Steel	200.1~300.0 ～ 3000.1~10000.0	None	None	Double Cone Type	Mechanical Type (Wedge Type)	290 ～ 4810

  From: 773,726 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powerlock Keyless Bushing A.P.LOCK SAPL-R Series

  SUNGIL

  [Features] · Relatively Low Fastening Torque · Recommended shaft outer diameter tolerance: h6 if smaller than inner diameter (d) 40 mm, h8 if larger than 42 mm · Recommended hub diameter tolerance: H7 if smaller than inner diameter (d) 40 mm, H8 if larger than 42 mm

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Sleeve	6 ～ 50	9 ～ 57	Steel	-	-	None	-	-	-

  From: 276,938 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Clamp Element Model SCE200

  SANKI

  Clamp element for shaft and boss connections that require substantial transmission torque.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	19 ～ 100	47 ～ 145	Steel	200.1~300.0 ～ 10000.1~300000.0	None	None	Double Cone Type	Mechanical Type (Wedge Type)	270 ～ 10500

  From: 1,718,473 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mecha-Lock MN Series, Nut Type

  ISEL

  Tightening by nut shortens tightening time

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Nut Tightening	8 ～ 35	14 ～ 48	Steel	20.1~50.0 ～ 300.1~500.0	Provided	None	Tapered Sleeve Type	Mechanical Type (Wedge Type)	29.4 ～ 461

  From: 847,114 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  POSI LOCK D

  MIKI PULLEY

  Shaft and mounting parts have a large allowable dimensions clearance, and can be easily aligned and positioned. Medium load and lightweight types.[Features]· Tighten the clamping bolt to move the outer ring in the shaft direction.· At this time, the wedging action between the inner ring and the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.· The PSL-D is designed for use with medium loads, the surface pressure is small, and it can lead to a reduction of the diameter and weight of the installation.· Short in shaft direction, taking up no more space than is necessary.· PSL-D-CThe simple rust proofing specification is a simple rust proofing specification that involves applying electroless nickel plating to the main body

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	2 ～ 50	16 ～ 80	Steel	2.0~20.0 ～ 1000.1~3000.0	-	None / Electroless Nickel Plating	Single Cone Type	Mechanical Type (Wedge Type)	6 ～ 1760

  From: 1,677,034 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mechanical Lock MR Thin Type

  ISEL

  Optimal for when a thin-wall hub design is desired

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Thin Wall	6 ～ 50	12 ～ 65	Steel	2.0~20.0 ～ 1000.1~3000.0	Provided	None	Tapered Sleeve Type	Mechanical Type (Wedge Type)	11 ～ 2120

  From: 674,568 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Lock-SWLE200 Type

  YHB CO.LTD.

  • Volume Discount

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  -	-	47 ～ 250	Steel	200.1~300.0 ～ 10000.1~300000.0	-	-	-	Mechanical Type (Wedge Type)	265 ～ 49588

  From: 833,977 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power lock keyless bushing A.P.LOCK SAPL-D4 series

  SUNGIL

  [Features] · Self-centering Capability · Recommended Shaft Outer Diameter Tolerance: h8 · Recommended Hub Inner Diameter Tolerance: H8

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	19 ～ 60	47 ～ 90	Steel	-	Provided	None	-	Mechanical Type (Wedge Type)	360 ～ 5820

  From: 1,319,848 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  POSI LOCK K

  MIKI PULLEY

  Shaft and mounting parts have a large allowable dimensions clearance, and can be easily aligned and positioned.

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	6 ～ 40	12 ～ 53	Steel	2.0~20.0 ～ 700.1~1000.0	-	None / Electroless Nickel Plating	Single Cone Type	Mechanical Type (Wedge Type)	5.9 ～ 720

  From: 980,450 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Lock-SWLE200B Type

  YHB CO.LTD.

  • Volume Discount

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  -	8 ～ 100	22 ～ 145	Steel	-	-	-	-	Mechanical Type (Wedge Type)	18 ～ 10591

  From: 842,752 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  MechaLock - Easy Mounting (Nut)

  MISUMI

  [Features]It can be easily installed by simply tightening 1 nut.

  • Volume Discount

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Nut Tightening	8 ～ 35	14 ～ 48	Steel	20.1~50.0 ～ 300.1~500.0	None	None / Black Oxide / Electroless Nickel Plating	Tapered Sleeve Type	Mechanical Type (Wedge Type)	21 ～ 461

  From: 907,699 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mechanical MKT Rust-proof General Purpose Type - Electroless Nickel Plating Specifications

  ISEL

  No drag when connecting for easy removal. Electroless nickel plated product.

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	20 ～ 50	47 ～ 80	Steel	200.1~300.0 ～ 1000.1~3000.0	None	Electroless Nickel Plating	Single Cone Type	Mechanical Type (Wedge Type)	294 ～ 1775

  From: 1,497,010 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powerlock Keyless Bushing A.P.LOCK SAPL-T Series

  SUNGIL

  [Features] · Self-centering Capability · Recommended Shaft Outer Diameter Tolerance: h8 · Recommended Hub Inner Diameter Tolerance: H8

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	6 ～ 50	14 ～ 65	Steel	-	Provided	None	-	Mechanical Type (Wedge Type)	12 ～ 2100

  From: 453,594 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mechanical MKN Rust-proof Nut Tightening Type - Electroless Nickel Plating Specifications

  ISEL

  Nut tightening shortens tightening time. Electroless nickel plated product.

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Nut Tightening	8 ～ 35	14 ～ 48	Steel	20.1~50.0 ～ 300.1~500.0	Provided	Electroless Nickel Plating	Tapered Sleeve Type	Mechanical Type (Wedge Type)	29.4 ～ 461

  From: 1,608,242 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KanaLock (Cost-Effective Product) Model KPL300

  KATAYAMA CHAIN

  [Features]・ The KPL300 type requires very little mounting space in the radial direction, and the number of built-in KanaLocks can be selected up to 4. It is also possible to transmit a large torque.・ The mating of the boss hole and the shaft is up to H8/h8

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Sleeve	10 ～ 80	-	Steel	2.0~20.0 ～ 1000.1~3000.0	None	None	Tapered Sleeve Type	Mechanical Type (Wedge Type)	6.9 ～ 1860

  From: 116,560 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Clamp Element Model SCE201

  SANKI

  [Features]· In addition to the features of model SCE200, it has a centering effect, and is usable for items with especially narrow boss widths.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	8 ～ 50	21 ～ 72	Steel	20.1~50.0 ～ 1000.1~3000.0	Provided	None	Single Cone Type	Mechanical Type (Wedge Type)	21 ～ 1660

  From: 1,280,775 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Clamp Element Model SCE210

  SANKI

  Because the ratio of the internal and outer diameters is small, it can be connected with a small-diameter boss. Also, it has a centering function that stops the boss from moving in the shaft direction.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Thin Wall	6 ～ 50	14 ～ 65	Steel	2.0~20.0 ～ 1000.1~3000.0	Provided	None	Single Cone Type	Mechanical Type (Wedge Type)	12 ～ 1870

  From: 1,325,803 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Keyless Bushing A.P.LOCK SAPL-AK Series

  SUNGIL

  [Features]·Self-centering function: Prevents minute off-centering.·The diameter difference between the inner diameter (d) and the outer diameter (D) is small, and the low surface pressure makes it possible to install even small hubs.·Standardized inner diameter ⌀4.5 to ⌀40.·Simple in concept and easy to assemble.·Stainless steel (vacuum environment) or electroless nickel plating (corrosion prevention) products can be selected depending on the operating environment.

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	5 ～ 50	16 ～ 72	Steel	2.0~20.0 ～ 1000.1~3000.0	Provided	Electroless Nickel Plating	Single Cone Type	Mechanical Type (Wedge Type)	4.6 ～ 1362

  From: 631,941 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power lock keyless bushing A.P.LOCK SAPL-D2 series

  SUNGIL

  [Features] · Self-centering Capability · Recommended Shaft Outer Diameter Tolerance: h8 · Recommended Hub Inner Diameter Tolerance: H8

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	19 ～ 60	47 ～ 90	Steel	-	Provided	None	-	Mechanical Type (Wedge Type)	273 ～ 2553

  From: 552,774 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Power lock keyless bushing A.P.LOCK SAPL-D3 series

  SUNGIL

  [Features] · Self-centering Capability · Recommended Shaft Outer Diameter Tolerance: h8 · Recommended Hub Inner Diameter Tolerance: H8

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	19 ～ 60	47 ～ 90	Steel	-	Provided	None	-	Mechanical Type (Wedge Type)	243 ～ 2223

  From: 574,546 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  POWERLOCK ML/MG SERIES

  TSUBAKIMOTO CHA

  A keyless bushing that connects the shaft and boss without using a key.[Features]·A simple fastening type that can be easily fastened with a single nut.·It can also be attached to a boss that is shorter than the overall length of the power lock.·A special lubricating coating eliminates the need to apply oil or grease during assembly.·It has a centering function, eliminating the need for troublesome machining of the guide part of the boss.[Applications]·Ideal for timing pulleys, cams, etc. where fine angle adjustment is required.·Convenient for places where removal is required.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Nut Tightening	10 ～ 12	24	Steel	20.1~50.0	Provided	None	Tapered Sleeve Type	Mechanical Type (Wedge Type)	42.1 ～ 50

  From: 2,611,853 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mechanical Lock MKA Rust-proof Standard Electroless Nickel Plating Specifications

  ISEL

  Centering function suppresses outer circumference and terminal surface run-out. Electroless nickel plated product.

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Flanged	8 ～ 50	21 ～ 72	Steel	20.1~50.0 ～ 1000.1~3000.0	Provided	Electroless Nickel Plating	Single Cone Type	Mechanical Type (Wedge Type)	16.6 ～ 1362

  From: 1,247,050 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KANA lock (cost performance product) KPL200 shape

  KATAYAMA CHAIN

  KPL200 is a dedicated KanaLock for shafts and bosses that require substantial transmission torque. Easy mounting. Applicable shaft diameter 19 mm to 70 mm.

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	19 ～ 70	47 ～ 110	Steel	200.1~300.0 ～ 3000.1~10000.0	None	None	Double Cone Type	Mechanical Type (Wedge Type)	270 ～ 5100

  From: 445,569 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pressurization Flange Model F300S

  SANKI

  Pressurization flange for boss side mounting usable as a set with clamp element model SCE300.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Sleeve	10.2 ～ 60.2	12.8 ～ 67.8	Steel	-	None	None	Tapered Sleeve Type	Mechanical Type (Wedge Type)	-

  From: 363,070 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Lock-SWLE200A Type

  YHB CO.LTD.

  • Volume Discount

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  -	19 ～ 100	47 ～ 145	Steel	-	-	-	-	Mechanical Type (Wedge Type)	294 ～ 11081

  From: 818,017 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Lock-SWLE200C Type

  YHB CO.LTD.

  • Volume Discount

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  -	-	50 ～ 145	Steel	700.1~1000.0 ～ 10000.1~300000.0	-	-	-	Mechanical Type (Wedge Type)	900 ～ 26500

  From: 2,394,089 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  POSI LOCK G

  MIKI PULLEY

  Shaft and mounting parts have a large allowable dimensions clearance, and can be easily aligned and positioned. Can support heavy loads.[Features]· Tighten the clamping bolt to move the 2 taper ring in the shaft direction.· At this time, the wedging action between both the inner ring and the outer ring against the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.· The PSL-G has an even transmission ability due to its simple construction and strong components, and can also cope with heavy loads.· Short in shaft direction, taking up no more space than is necessary.· PSL-G-CThe simple rust proofing specification is a simple rust proofing specification that involves applying electroless nickel plating to the main body

  CAD ：

  2D / 3D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Straight	19 ～ 120	47 ～ 165	Steel	200.1~300.0 ～ 10000.1~300000.0	-	None / Electroless Nickel Plating	Double Cone Type	Mechanical Type (Wedge Type)	289 ～ 13500

  From: 1,347,034 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Lock-SWLE100 Type

  YHB CO.LTD.

  • Volume Discount

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  -	-	18 ～ 125	Steel	50.1~70.0 ～ 10000.1~300000.0	-	-	-	Mechanical Type (Wedge Type)	58 ～ 15000

  From: 808,791 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Lock-SWLE200D Type

  YHB CO.LTD.

  • Volume Discount

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  -	-	38 ～ 170	Steel	-	-	-	-	Mechanical Type (Wedge Type)	-

  From: 1,322,197 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Keyless Bushing A.P.LOCK SAPL-C Series

  SUNGIL

  [Features] · Self-centering Capability: Minimal Off-centering Prevention. ・The difference in diameter between the inner diameter (d) and the outer diameter (D) is small, so that it can be mounted on a small hub with low surface pressure. (A.P. Lock of the most compact design) ·Suitable for Short Hubs. ·Since the inner ring is in close contact with the hub section, the hub does not move during tightening. ·Stainless Steel or Electroless Nickel plated products can be selected depending on the environment.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Thin Wall	5 ～ 30	12 ～ 41	Steel	2.0~20.0 ～ 500.1~700.0	Provided	None	Single Cone Type	Mechanical Type (Wedge Type)	9 ～ 523

  From: 725,330 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Keyless Bushing A.P.LOCK SAPL-CK Series

  SUNGIL

  [Features] · Self-centering Capability: Minimal Off-centering Prevention. ・The difference in diameter between the inner diameter (d) and the outer diameter (D) is small, so that it can be mounted on a small hub with low surface pressure. (A.P. Lock of the most compact design) ·Suitable for Short Hubs. ·Since the inner ring is in close contact with the hub section, the hub does not move during tightening. ·Stainless Steel or Electroless Nickel plated products can be selected depending on the environment.

  CAD ：

  2D

  Type	Shaft Bore Dia. d(Ø)	Hub Dia.(Ø)	Body Material	Allowable Torque Range(N•m)	Centering	Surface Treatment	Tightening Structure	Tightening Method	Allowable Torque(N•m)
  Thin Wall	5 ～ 30	12 ～ 41	Steel	2.0~20.0 ～ 500.1~700.0	Provided	Electroless Nickel Plating	Single Cone Type	Mechanical Type (Wedge Type)	9 ～ 523

  From: 861,586 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Type
Shaft Bore Dia. d(Ø)
Hub Dia.(Ø)
Body Material
Allowable Torque Range(N•m)
Centering
Surface Treatment
Tightening Structure
Tightening Method
Allowable Torque(N•m)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	TSUBAKIMOTO CHA	SUNGIL	MISUMI	SUNGIL	MISUMI	TSUBAKIMOTO CHA	MISUMI	SANKI	ISEL	MISUMI	TSUBAKIMOTO CHA	SUNGIL	ISEL	SUNGIL	SANKI	ISEL	MIKI PULLEY	ISEL	YHB CO.LTD.	SUNGIL	MIKI PULLEY	YHB CO.LTD.	MISUMI	ISEL	SUNGIL	ISEL	KATAYAMA CHAIN	SANKI	SANKI	SUNGIL	SUNGIL	SUNGIL	TSUBAKIMOTO CHA	ISEL	KATAYAMA CHAIN	SANKI	YHB CO.LTD.	YHB CO.LTD.	MIKI PULLEY	YHB CO.LTD.	YHB CO.LTD.	SUNGIL	SUNGIL
Product SeriesDòng sản phẩm	MechaLock - Standard (Centering Function)	Power Lock, AS Series	Power lock keyless bushing A.P.LOCK SAPL-D1 series	MechaLock - Straight	Keyless bushing A.P.LOCK SAPL-A Series	MechaLock - Overview - Thin	Power Lock, KE Series	MechaLock - Straight for High Torque	Clamp Element Model SCE300	MechaLock MA Standard Type)	MechaLock - Compact (Centering Function)	Power Lock, AE Series	Keyless bushing A.P.LOCK SAPL-B Series	Mechanical Lock MT General Purpose Type	Powerlock Keyless Bushing A.P.LOCK SAPL-R Series	Clamp Element Model SCE200	Mecha-Lock MN Series, Nut Type	POSI LOCK D	Mechanical Lock MR Thin Type	Power Lock-SWLE200 Type	Power lock keyless bushing A.P.LOCK SAPL-D4 series	POSI LOCK K	Power Lock-SWLE200B Type	MechaLock - Easy Mounting (Nut)	Mechanical MKT Rust-proof General Purpose Type - Electroless Nickel Plating Specifications	Powerlock Keyless Bushing A.P.LOCK SAPL-T Series	Mechanical MKN Rust-proof Nut Tightening Type - Electroless Nickel Plating Specifications	KanaLock (Cost-Effective Product) Model KPL300	Clamp Element Model SCE201	Clamp Element Model SCE210	Keyless Bushing A.P.LOCK SAPL-AK Series	Power lock keyless bushing A.P.LOCK SAPL-D2 series	Power lock keyless bushing A.P.LOCK SAPL-D3 series	POWERLOCK ML/MG SERIES	Mechanical Lock MKA Rust-proof Standard Electroless Nickel Plating Specifications	KANA lock (cost performance product) KPL200 shape	Pressurization Flange Model F300S	Power Lock-SWLE200A Type	Power Lock-SWLE200C Type	POSI LOCK G	Power Lock-SWLE100 Type	Power Lock-SWLE200D Type	Keyless Bushing A.P.LOCK SAPL-C Series	Keyless Bushing A.P.LOCK SAPL-CK Series
CADCAD	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D	2D / 3D	2D / 3D	2D	2D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D			2D / 3D			2D	2D
From	619,900 VND Special Price On Sale Till 31/03/2025	1,440,000 VND	517,214 VND	2,543,351 VND Special Price On Sale Till 31/03/2025	518,395 VND	635,159 VND	1,517,693 VND	2,360,686 VND	269,175 VND	736,382 VND	708,143 VND	2,797,846 VND	680,316 VND	773,726 VND	276,938 VND	1,718,473 VND	847,114 VND	1,677,034 VND	674,568 VND	833,977 VND	1,319,848 VND	980,450 VND	842,752 VND	907,699 VND Special Price On Sale Till 31/03/2025	1,497,010 VND	453,594 VND	1,608,242 VND	116,560 VND	1,280,775 VND	1,325,803 VND	631,941 VND	552,774 VND	574,546 VND	2,611,853 VND	1,247,050 VND	445,569 VND	363,070 VND	818,017 VND	2,394,089 VND	1,347,034 VND	808,791 VND	1,322,197 VND	725,330 VND	861,586 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	8 Day(s)	4 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	6 Day(s) or more	9 Day(s) or more	4 Day(s) or more	8 Day(s)	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	8 Day(s)	6 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	8 Day(s)	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	8 Day(s)	8 Day(s)	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	5 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	9 Day(s) or more	9 Day(s) or more
Type	Flanged	Straight	Straight	Straight	Flanged	Direct Mounting	Flanged	Straight	Sleeve	Flanged	Thin Wall	Flanged	Flanged	Straight	Sleeve	Straight	Nut Tightening	Straight	Thin Wall	-	Straight	Flanged	-	Nut Tightening	Straight	Flanged	Nut Tightening	Sleeve	Flanged	Thin Wall	Flanged	Straight	Flanged	Nut Tightening	Flanged	Straight	Sleeve	-	-	Straight	-	-	Thin Wall	Thin Wall
Shaft Bore Dia. d(Ø)	5 ～ 70	19 ～ 200	18 ～ 200	55 ～ 60	5 ～ 50	5 ～ 30	10 ～ 19	30 ～ 65	10 ～ 60	5 ～ 80	5 ～ 50	19 ～ 110	8 ～ 30	19 ～ 70	6 ～ 50	19 ～ 100	8 ～ 35	2 ～ 50	6 ～ 50	-	19 ～ 60	6 ～ 40	8 ～ 100	8 ～ 35	20 ～ 50	6 ～ 50	8 ～ 35	10 ～ 80	8 ～ 50	6 ～ 50	5 ～ 50	19 ～ 60	19 ～ 60	10 ～ 12	8 ～ 50	19 ～ 70	10.2 ～ 60.2	19 ～ 100	-	19 ～ 120	-	-	5 ～ 30	5 ～ 30
Hub Dia.(Ø)	16 ～ 97	47 ～ 260	47 ～ 260	85 ～ 90	16 ～ 72	8 ～ 35	23 ～ 33	55 ～ 95	13 ～ 68	16 ～ 107	12 ～ 65	47 ～ 155	22 ～ 55	47 ～ 110	9 ～ 57	47 ～ 145	14 ～ 48	16 ～ 80	12 ～ 65	47 ～ 250	47 ～ 90	12 ～ 53	22 ～ 145	14 ～ 48	47 ～ 80	14 ～ 65	14 ～ 48	-	21 ～ 72	14 ～ 65	16 ～ 72	47 ～ 90	47 ～ 90	24	21 ～ 72	47 ～ 110	12.8 ～ 67.8	47 ～ 145	50 ～ 145	47 ～ 165	18 ～ 125	38 ～ 170	12 ～ 41	12 ～ 41
Body Material	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel
Allowable Torque Range(N•m)	2.0~20.0 ～ 3000.1~10000.0	200.1~300.0 ～ 10000.1~300000.0	-	1000.1~3000.0	2.0~20.0 ～ 1000.1~3000.0	2.0~20.0 ～ 100.1~150.0	20.1~50.0 ～ 100.1~150.0	1000.1~3000.0 ～ 3000.1~10000.0	2.0~20.0 ～ 700.1~1000.0	2.0~20.0 ～ 3000.1~10000.0	2.0~20.0 ～ 1000.1~3000.0	200.1~300.0 ～ 10000.1~300000.0	2.0~20.0 ～ 500.1~700.0	200.1~300.0 ～ 3000.1~10000.0	-	200.1~300.0 ～ 10000.1~300000.0	20.1~50.0 ～ 300.1~500.0	2.0~20.0 ～ 1000.1~3000.0	2.0~20.0 ～ 1000.1~3000.0	200.1~300.0 ～ 10000.1~300000.0	-	2.0~20.0 ～ 700.1~1000.0	-	20.1~50.0 ～ 300.1~500.0	200.1~300.0 ～ 1000.1~3000.0	-	20.1~50.0 ～ 300.1~500.0	2.0~20.0 ～ 1000.1~3000.0	20.1~50.0 ～ 1000.1~3000.0	2.0~20.0 ～ 1000.1~3000.0	2.0~20.0 ～ 1000.1~3000.0	-	-	20.1~50.0	20.1~50.0 ～ 1000.1~3000.0	200.1~300.0 ～ 3000.1~10000.0	-	-	700.1~1000.0 ～ 10000.1~300000.0	200.1~300.0 ～ 10000.1~300000.0	50.1~70.0 ～ 10000.1~300000.0	-	2.0~20.0 ～ 500.1~700.0	2.0~20.0 ～ 500.1~700.0
Centering	Provided	None	-	None	Provided	None	Provided	None	None	Provided	Provided	Provided	Provided	None	-	None	Provided	-	Provided	-	Provided	-	-	None	None	Provided	Provided	None	Provided	Provided	Provided	Provided	Provided	Provided	Provided	None	None	-	-	-	-	-	Provided	Provided
Surface Treatment	None / Black Oxide / Electroless Nickel Plating	None	None	Electroless Nickel Plating	None	None	None	None	None	None	None / Electroless Nickel Plating	None	None	None	None	None	None	None / Electroless Nickel Plating	None	-	None	None / Electroless Nickel Plating	-	None / Black Oxide / Electroless Nickel Plating	Electroless Nickel Plating	None	Electroless Nickel Plating	None	None	None	Electroless Nickel Plating	None	None	None	Electroless Nickel Plating	None	None	-	-	None / Electroless Nickel Plating	-	-	None	Electroless Nickel Plating
Tightening Structure	Single Cone Type	Double Cone Type	-	Double Cone Type	Single Cone Type	Single Cone Type	Single Cone Type	Double Cone Type	Tapered Sleeve Type	Single Cone Type	Single Cone Type	Single Cone Type	Single Cone Type	Double Cone Type	-	Double Cone Type	Tapered Sleeve Type	Single Cone Type	Tapered Sleeve Type	-	-	Single Cone Type	-	Tapered Sleeve Type	Single Cone Type	-	Tapered Sleeve Type	Tapered Sleeve Type	Single Cone Type	Single Cone Type	Single Cone Type	-	-	Tapered Sleeve Type	Single Cone Type	Double Cone Type	Tapered Sleeve Type	-	-	Double Cone Type	-	-	Single Cone Type	Single Cone Type
Tightening Method	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	-	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)	Mechanical Type (Wedge Type)
Allowable Torque(N•m)	4.6 ～ 3400	294 ～ 60600	240 ～ 63342	2530 ～ 2760	7 ～ 1500	4.2 ～ 149	31.4 ～ 120	1110 ～ 6400	6.9 ～ 725	7 ～ 4100	9 ～ 2120	265 ～ 11400	18 ～ 510	290 ～ 4810	-	270 ～ 10500	29.4 ～ 461	6 ～ 1760	11 ～ 2120	265 ～ 49588	360 ～ 5820	5.9 ～ 720	18 ～ 10591	21 ～ 461	294 ～ 1775	12 ～ 2100	29.4 ～ 461	6.9 ～ 1860	21 ～ 1660	12 ～ 1870	4.6 ～ 1362	273 ～ 2553	243 ～ 2223	42.1 ～ 50	16.6 ～ 1362	270 ～ 5100	-	294 ～ 11081	900 ～ 26500	289 ～ 13500	58 ～ 15000	-	9 ～ 523	9 ～ 523

Loading...Tải…