(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
Nuts（Material：Steel Page2）
Nuts (for extruded aluminum extrusions) are fasteners used to attach parts to aluminum extrusions, connect two frames together or the like. Pre- and post-assembly nuts are available. The former is inserted in groove end surfaces of extruded aluminum extrusions before assembly. The latter is inserted in the top
Nuts (for extruded aluminum extrusions) are fasteners used to attach parts to aluminum extrusions, connect two frames together or the like. Pre- and post-assembly nuts are available. The former is inserted in groove end surfaces of extruded aluminum extrusions before assembly. The latter is inserted in the tops of grooves after assembly. Nuts can be fastened finger-tight in extruded aluminum extrusion grooves by using spring nuts, anti-slip nuts or stoppers. Nuts are made of many different materials and have many different surface treatments, so should be selected to match the application.
|
Nut Type
|
|
|---|---|
Brand |
|
Filter By |
|
| CAD |
|
| Days to Ship |
|
119 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
5 Series Post-Assembly Insertion Nut/Stopper Set
MISUMI
A set of the post-assembly insertion nut and stopper. It is cheaper than purchasing the nut and stopper separately.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Steel Nuts and Stoppers Set Not Provided From: 11,550 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
Long Nuts for Aluminum Frames - For 8 Series (Slot Width 10mm) -Long Nuts L Dimension Fixed Type
MISUMI
These are long nuts with fixed length (L dimension) of 450 mm. Workpieces such as slide guides can be attached to the frame at any pitch. It can also be used for adding frames.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts MISUMI 8 Series / MISUMI 8-45 Series - Steel - Not Provided From: 131,786 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
5 Series Stopper - Integrated Pre-Assembly Insertion Nut, Steel
MISUMI
·Product that integrates a pre-assembly insertion nut and a pre-assembly insertion stopper. You can also purchase each part individually.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Steel With Stoppers Not Provided From: 15,013 VND Special Price Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M3 / M4 / M8 Steel Short, Rotating Not Provided From: 6,100 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Economy Type Post-Assembly Insertion Screws for 5 (Slot Width 6mm) Aluminum Frames
MISUMI
Economy type post-assembly insertion screws for 5 Series aluminum extrusions.
Nut Type Series Nominal of Thread M(mm) Material Function Lock T-Bolts MISUMI 5 Series M5 Steel Conductive Not Provided From: 13,820 VND Special Price Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
5 Series Post-Assembly Insertion Nut with Leaf Spring, Steel
MISUMI
The plate spring is welded to the stopper nut. It does not fall off even if the frame is placed vertically
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Steel With Leaf Springs Not Provided From: 5,350 VND Special Price Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
Pre-Assembly Insertion Square Nuts for Aluminum Frames - For 6 Series (Slot Width 8mm). It is a square nut used for preparing a screw hole for assembling with bolt and machine component [Features] • Pre-Assembly insertion: Insert from the end before assembling the aluminum frame • Suitable for use with aluminum profile 6 series (slot width 8 mm.) • Can support bolt size M4, M5 and M6 • Size (Width x Length x Depth): 16 ...Readmore
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 6 Series M4 / M5 / M6 Steel Economy Not Provided From: 501,914 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Post-assembly insertion spring nut for aluminum frames with a built-in spring and a temporary stop function. You can easily move through the groove by pressing it lightly with your hand.
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 6 Series M3 / M4 / M5 / M6 Steel With Ball Springs Not Provided From: 1,391,744 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Nut and Stopper Set
MISUMI
This set product is less expensive than purchasing the nut and stopper separately.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M4 / M5 / M6 / M8 Steel Nuts and Stoppers Set Not Provided From: 17,099 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyStraight-Line Connector For Aluminum Frames With Slot Width of 10 mm
MiSUMi EconomyMISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum M8 Steel Economy Not Provided From: 24,856 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
NIC AUTOTEC
Structural element of factory automation equipment. [Nut Type]Pre-assembly insertion nut [Specifications] Equivalent to SWCH
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series / NIC Autotec Conveyor Frame M3 / M4 / M5 / M6 / M8 Steel Standard Not Provided From: 2,490 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Long Nuts for Aluminum Frame - For 6 Series (Slot Width 8 mm) - Long Nuts L Dimension Fixed Type
MISUMI
These are long nuts with fixed length (L dimension) of 450 mm. Workpieces such as slide guides can be attached to the frame at any pitch. It can also be used for adding frames.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts MISUMI 6 Series - Steel - Not Provided From: 96,754 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyPre-Assembly Standard Nut for AF China profiles _VNM
MiSUMi EconomyMISUMI
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Stoppers - M6 / M8 Steel Short, Rotating - From: 500 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Square Nut Set (Steel) NHG/NHR Series
NIC AUTOTEC
Structural material for factory automation equipment
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series M3 / M4 / M5 / M6 / M8 Steel Nuts and Stoppers Set Not Provided From: 169,295 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pre-Assembly Insertion Square Nuts - For 5 Series (Slot Width 6mm)【100 Pieces Per Package】
MISUMI
Pre-Assembly Insertion Square Nuts For Aluminum Profile - 5 Series (Slot Width 6 mm.). It is a square nut used for preparing a screw hole for assembling with bolt and machine component [Features] • Pre-Assembly insertion: Insert from the end before assembling the aluminum frame • Suitable for use with aluminum profile 5 series (slot width 6 mm.) • Can support bolt size M3, M4 and M5 • Size (Width x Length x Depth): 15 x 10 x 3 mm. • ...Readmore
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Steel Economy Not Provided From: 468,342 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Short Nuts【1-100 Pieces Per Package】
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Steel Short, Rotating Not Provided From: 15,013 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
This is an inexpensive sheet metal type iron nut. Please use HNKKST as the stopper.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M4 / M5 / M6 / M8 Steel Economy Not Provided From: 535,278 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion Short Nut【1-100 Pieces Per Package】
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M3 / M4 / M8 Steel Short, Rotating Not Provided From: 8,880 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Post-Insertion Nut / Nut Stopper L
NABESEI
[Applications]・ Post-assembly insertion nut L (M3・4・5・6・8)・ S Post-assembly insertion nut L (M3・4・5・6・8)・ Post-assembly insertion nut / nut stopper L for a 10 mm groove
- CAD ：
- 2D
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts - M3 / M4 / M5 / M6 / M8 Steel Standard Not Provided From: 95,848 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Square Nut【500-2,000 Pieces Per Package】
HAAFA
【Features】· Material : SS41· Surface : Zinc(Z), Nickel(N), Electroless Nickel(E)·It is inserted in a way for engagement with the groove, not being directly inserted into it, and price is affordable.
Nut Type Series Nominal of Thread M(mm) Material Function Lock Square Nut - M4 / M5 / M6 / M10 Steel - - From: 1,108,413 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock Nuts with Leaf Springs
MISUMI
The leaf spring is welded to the lock nut. Because positioning can be done easily, it is convenient for places where panels and covers are frequently removed.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M5 Steel With Locks Not Provided From: 18,766 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock Nuts
MISUMI
The position of the nut single piece can be fixed with the included set screw. It is convenient for places where panels and covers are frequently removed.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Steel With Locks Not Provided From: 6,180 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Long Nuts for Aluminum Frames - For 5 Series (Slot Width 6mm) -Long Nuts L Dimension Fixed Type
MISUMI
These are long nuts with fixed length (L dimension). Workpieces such as slide guides can be attached to the frame at any pitch. It can also be used for adding frames.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts MISUMI 5 Series - Steel - Not Provided From: 56,301 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Pre-Assembly Insertion Lock Nut - For 6 Series (Slot Width 8mm)
MISUMI
The position of the nut single piece can be fixed with the included set screw. It is convenient for places where panels and covers are frequently removed.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 6 Series M6 Steel With Locks Not Provided From: 16,681 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 6 Series M4 / M5 / M6 Steel Short, Rotating Not Provided From: 19,181 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Post-Assembly Nut and Stopper Set - For 6 Series (Slot Width 8 mm) Aluminum Frame
MISUMI
This set product is less expensive than purchasing the nut and stopper separately.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 6 Series M3 / M4 / M5 / M6 Steel Nuts and Stoppers Set Not Provided From: 15,430 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
MISUMI
The leaf spring is welded to the post-assembly insertion lock nut. Positioning is easy.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 6 Series M6 Steel With Locks Not Provided From: 19,392 VND Special Price Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
20mm Square Metal Stopper for 5 Series Aluminum Frames
MISUMI
A set of the post-assembly insertion nut and stopper. It is cheaper than purchasing the nut and stopper separately.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Steel Nuts and Stoppers Set Not Provided From: 15,638 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Nut and Metal Stopper Set
MISUMI
This set product is less expensive than purchasing the nut and stopper separately.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M4 / M5 / M6 / M8 Steel Nuts and Stoppers Set Not Provided From: 18,141 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Lock Nuts with Leaf Springs
MISUMI
The plate spring is welded to the post-assembly insertion lock nut. Positioning is easy.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M8 Steel With Locks Not Provided From: 20,435 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Lock Nuts
MISUMI
The position of the nut single piece can be fixed with the included set screw. It is convenient for places where panels and covers are frequently removed.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M4 / M5 / M6 / M8 Steel With Locks Not Provided From: 17,724 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Post-Assembly Insertion Nut Set (Steel) NAST Series
NIC AUTOTEC
Structural material for factory automation equipment
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series M3 / M4 / M5 / M6 / M8 Steel Nuts and Stoppers Set Not Provided From: 60,615 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YUKIGIKEN
[Applications]· Retrofitting nut, dedicated for 40 series frames. A wide range of parts can be screwed into the frame.
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts LECOFRAME 40 Series (For Medium/Heavy Structures) M4 / M5 / M6 / M8 Steel Standard Not Provided From: 123,116 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
IMAO CORPORATION
line 6 profiles dedicated. When inserted into the T-groove, the nut is temporarily fixed by the spring pressure of the spring plunger. It can also be inserted from any position of the groove.
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts IMAO (item) Line 6 M3 / M4 / M5 / M6 Steel - - From: 56,760 VND Special Price Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Double Nut【500 Pieces Per Package】
HAAFA
【Features】· Material : Zn Casting· Surface : Vibrating Barrel, Nickel(N)· It can be directly tightened by putting into the frame groove.(Very simple when panel working)
Nut Type Series Nominal of Thread M(mm) Material Function Lock - - - Steel - - From: 7,271,437 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Nut【20 Pieces Per Package】
HAAFA
【Features】· Material : SS41· Surface : Nickel Plating(N)· It is a long nut which is used for direct connection without frame processing.
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts - - Steel - - From: 1,112,587 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ball Nut【500-1,000 Pieces Per Package】
HAAFA
【Features】· Material : Steel (Equivalent to S10C)· Surface : Nickel Plating(N)· It is used for tightening by inserting into the frame groove.It is fixed on a desired location as tension works on the ball.
Nut Type Series Nominal of Thread M(mm) Material Function Lock - - M3 / M4 / M5 / M6 / M8 Steel - - From: 3,635,718 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pre-Assembly Insertion Lock Nut - For 5 Series (Slot Width 6mm)
MISUMI
The position can be fixed with the single nut by tightening the included set screw
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 5 Series M5 Steel With Locks Not Provided From: 8,360 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Steel Short, Rotating Not Provided From: 11,040 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Post-Assembly Nut and Metal Stopper Set - For 6 Series (Slot Width 8 mm) Aluminum Frame
MISUMI
This set product is less expensive than purchasing the nut and stopper separately.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 6 Series M3 / M4 / M5 / M6 Steel Nuts and Stoppers Set Not Provided From: 16,472 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pre-Assembly Insertion Lock Nuts for Aluminum Frames - For 8 Series (Slot Width 10mm)
MISUMI
The position of the nut single piece can be fixed with the included set screw. It is convenient for places where panels and covers are frequently removed.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M8 Steel With Locks Not Provided From: 17,724 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
MISUMI
This product integrates a pre-assembly insertion nut and a pre-assembly insertion stopper. You can also purchase each part individually.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 8-45 Series M4 / M5 / M6 / M8 Steel With Stoppers Not Provided From: 14,220 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Economy Type Post-Assembly Insertion Screws for 6 (Slot Width 8mm) Aluminum Frames
MISUMI
Economy type post-assembly insertion screws for 6 Series aluminum extrusions.
Nut Type Series Nominal of Thread M(mm) Material Function Lock T-Bolts MISUMI 6 Series M6 Steel Conductive Not Provided From: 10,950 VND Special Price Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Economy Type Post-Assembly Insertion Screws for 8 (Slot Width 10mm) Aluminum Frames
MISUMI
Economy type post-assembly insertion screws for 8 Series aluminum extrusions.
Nut Type Series Nominal of Thread M(mm) Material Function Lock T-Bolts MISUMI 8 Series / MISUMI 8-45 Series M8 Steel Conductive Not Provided From: 22,720 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NIC AUTOTEC
It can be used for the M6 and M8 series. [Materials]SS400 equivalent [Treatment] Trivalent chromate
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts NIC Autotec M6 Series / NIC Autotec M8 Series M6 / M8 Steel Standard Not Provided From: 150,008 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Series
- MISUMI 3 Series
- MISUMI 5 Series
- MISUMI 6 Series
- MISUMI 8 Series
- MISUMI 8-45 Series
- LECOFRAME 25 Series (For Light/Medium Structures)
- LECOFRAME 40 Series (For Medium/Heavy Structures)
- NIC Autotec M4 Series
- NIC Autotec M6 Series
- NIC Autotec M8 Series
- NIC Autotec H10 Series
- NIC Autotec Conveyor Frame
- IMAO (item) Line 5
- IMAO (item) Line 6
- IMAO (item) Line 8
- MISUMI, European Standard, Groove Width: 6 mm, Dedicated for Aluminum
- MISUMI, European Standard, Groove Width: 8 mm, Dedicated for Aluminum
- MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum
-
Nominal of Thread M(mm)
- M3
- M4
- M5
- M6
- M8
- M10
-
Material
-
Function
-
Standard -
Economy -
Nuts and Stoppers Set -
With Leaf Springs -
With Ball Springs -
With Stoppers -
With Locks -
Conductive -
Eccentricity -
Short, Rotating -
Plastic Stoppers -
Metal Stoppers -
With galling prevented
-
-
Lock
- Provided
- Not Provided
Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này
Related Categories to NutsDanh mục liên quan đến Nuts
-
- Aluminum Frames
- Special AEX
- AEX Units
- Brackets and Joint Parts
- Nuts
- Bolts
- Frame Caps
- Slot Covers
- Handles
- Hinges
- Catches and Locks
- Casters
- Foot Bases for Aluminum Extrusions
- Adjuster Pads
- Panel Mounts
- Curtains, Sheets
- Door Sliders
- Conveyor Parts
- Clamps, Holders, Hooks
- LED Lights
- Jigs, Maintenace Parts
- Concealed(invisible) joint parts/frame with joints
- Accessories for aluminum alloy profiles
- Transparent Plastic Covers
- Perforated Metals, Fences, Nets, Panels
-
FAQ Nuts (for Aluminum extrusions)
-
- Question: Can JIS standard hexagon nuts and square nuts be used for Aluminum extrusions?
- Answer: No.
A special nut that fits into the groove of the Aluminum extrusion shall be used to secure a large area of buckling pressure and prevents buckling of the Aluminum extrusion. - Question: Can nuts and brackets be used in common with any type of Aluminum extrusion?
- Answer: It can be used within the same series.
Since the groove shape is the same, accessories can be used in common. - Question: Is it possible to attach nuts and bolts made of stainless steel as the attachment for alteration code of black bracket as "with applicable bolts and nuts set"
(e.g.：HBLFSNB6-SST, HBLFSNB6-SSU, HBLFSNB6-SSP , etc.) - Answer: No, because there are no black stainless-steel bolts that correspond to the black bracket, so it cannot be attachment for alteration "with applicable bolts and nuts set".
- Question: Is there any product to prevent the fastening part from loosening?
- Answer: Yes.
• Screws with Captured Spring Washer Bulk Packages (500 pcs. per Package) (HCBST)
• Nut with Loosen Prevention Function (HNTTV□/HNTTZ□-series)
□ is Aluminum extrusion No. - Question: What is the difference between the 8-series and 8-45-series when selecting nuts for Aluminum extrusions?
- Answer: The Model No. used for the Pre-Assembly Insertion Stoppers and Stopper Integrated Nuts are different between the 8-series and 8-45-series. Other nuts can be used in common.
• 8-series：Pre-Assembly Insertion Stoppers HNST8, Stopper Integrated Nuts HNTE8, stainless steel material is model SHNTE8
• 8-45-series：HNST8-45, HNTE8-45, SHNTE8-45 - Question: What is the function of “reversal” in Tabbed Reversal Brackets?
- Answer: The Tabbed Reversal Brackets allows Aluminum extrusions to be connected together in L-connections and Cross-connections. Please see the example below.
Tabbed Reversal Brackets can be used even when the frames intersect. - Question: The allowable load of the bracket is the load under what conditions?
- Answer: It is the load per unit under the condition where two Aluminum extrusions are set up, then another Aluminum extrusion is placed between them with two brackets attached underneath.
The allowable load represents the load that bracket can maintain its position (without breaking/sliding) when all the mounting holes of the bracket are fixed with bolts and the load is applied.
- Question: What is the customizable length of the Aluminum extrusion that available for order?
- Answer: The length betwen 50 to 4000 mm can be ordered.
In addition, depending on the type, it is possible to order length 4001 mm to 6000 mm per Misumi FA catalog. So, please send us a request for quotation via Quotation request for item not listed in MISUMI FA Catalog service. - Question: What are the cutting tolerances of the Aluminum extrusions?
- Answer: ± 0.5 mm of the specified dimension.
- Question: Please explain about the perpendicularity of the cut surface of the Aluminum extrusion.
- Answer: Since the Aluminum extrusion is an extruded material, the datum cannot be specified. Therefore, the perpendicularity of the cut surface cannot be measured.
- Question: What is the product with "K" at the beginning of the Model No. of the Aluminum extrusion?
(Example：KHFS6-3030-4000) - Answer: A fixed-length frame. Available in 2 types: 4000 mm (effective length) and 1000 mm.
- Question: Fixed-length frames of Model No. starts with K are described as "effective length 4000 mm". What does effective length mean?
- Answer: It means that the actual usable length is 4000 mm or more.
Actual size should be 4000 mm or more (a few 10 mm longer).
A fixed-length frame is a frame that is cut and used by the customer, so the exact length cannot be specified. - Question: What is the difference between the Aluminum extrusion 8-series and the 8-45-series?
- Answer: Groove width is the same 1 mm, but the size of outer diameter and depth of groove are different.
Please select accessories that are compatible with each-series. - Question: What is tools for Aluminum extrusion cutting?
- Answer: The Aluminum extrusion can be cut by tip saw for soft steel materials. After assembling the frame, please attach Frame Caps at the cut surface.
- Question: What is the perpendicularity tolerance of the bracket?
- Answer: It depends on the type of bracket.
• Other than extruded brackets: There is no perpendicularity tolerance setting.
• Extruded bracket: Within ± 1 degree according to JIS standard H 4100 special class (excluding right angle machining type).
• Right angle (90 degree Brackets): Tolerance smaller than normal extruded bracket. Please refer to each product page for details. - Question: Is there a bracket for connecting between Aluminum extrusion and plate?
- Answer: Yes.
Please select a bracket with single side tap (HBLFSNK □, HBLFSNE □)
□ is Aluminum extrusion No. - Question: Please explain about the type of frame cap of high-rigidity Aluminum extrusion GFS, GNFS
- Answer: The following products are available:
Frame cap (made of resin)：
• 6-series (groove width 8 mm) frame cap for Aluminum extrusion (Frame End Caps - For 6 Series (Slot Width 8mm) Aluminum Frames)
• 8-series (groove width 10 mm) frame cap for Aluminum extrusion (Frame End Caps - For 8 Series (Slot Width 10mm) Aluminum Frames)
High-rigidity plate (made of metal)：
• HFCD□ (□ is Aluminum extrusion No.)
GFS and GNFS type have different cross-sectional shapes from other types, so they need to use with special frame caps. - Question: Is there a bracket that can be easily installed after assembly?
- Answer: Yes.
Please check on Panel Brackets - Plastic (HCBR).
It can be installed after assembling the Aluminum extrusion, and the panel can be attached. - Question: Are there any accessories for fixing the cable to the Aluminum extrusion?
- Answer: Yes.
Please check on Cable clamp (HFCN□PACK, HFCC□PACK) Please also be noted that cable band is not included.
□ is Aluminum extrusion No. - Question: Is there a roller that can be used with the Aluminum extrusion?
- Answer: Yes.
Rollers for Aluminum Frames (HFROLL, HFROLLM) or One-Sided Rollers for Aluminum Frames【10 Pieces Per Package】 (HFROLK) - Question: There is something like blue grease on the thread part of the round bar handle with plate. Is there any problem in use?
- Answer: No problem in use.
Since the grease is applied for rust prevention inside the thread part, it can be used normally. - Question: When creating a door using aluminum extrusion, how should the clearance between the door and Aluminum extrusion be?
- Answer: Clearance of .the Aluminum extrusion between the door and the outer frame depends on the series of Aluminum extrusions used and the width of the door.
Please refer to the clearance between the door and the outer frame below.
-
- Question: If I specify "with applicable bolts and nuts set"for alteration code of the bracket, can I change only the nuts to a different model number by "change M diameter"?
- Answer: No. In that case, please order separately.
- Question: Is it possible to add a tapped hole to the end face of a flat milled Aluminum extrusion?
- Answer: Yes.
Alteration code LTP (left end face) , RTP (right end face) , and TPW (both end faces) can be specified same as normal Aluminum extrusion. - Question: Is it possible to specify 2 or more types of alteration code on the Aluminum? extrusion?
- Answer: Yes.
Please add on the alteration code numbers side by side.
For example: "HFS6-3030-1000-LTP-RCH" - Question: Is it possible to drill holes with different diameters on one Aluminum extrusion?
- Answer: Not available as a standard product.
- Question: How many additional wrench holes can be specified for the Aluminum extrusion?
- Answer: Up to 5 horizontal, vertical, and cross holes, totally 15 locations.
- Question: Is it possible to peform alteration code (Number of holes, hole position, hole size, etc.) for Aluminum extrusions that are not listed in the "Alteration code" in the Aluminum extrusion page?
- Answer: There is a case where it is possible.
- Question: When using the screw joint HCJ6 with the 6-series Aluminum extrusion, which hole diameter should be used for the additional wrench hole of the Aluminum extrusion between φ5 and φ8?
- Answer: Wrench hole diameter must be φ8.
- Question: Is it possible to make additional 5 holes to the flat frame?
- Answer: Yes.
Up to 5 holes can be added to the flat frame. - Question: Is it possible to paint the Aluminum extrusion?
- Answer: No.
- Question: Please explain about the difference between LMH and LMV of M hole alteration of Aluminum extrusion.
- Answer: LMH is the instruction to make M hole horizontally on the left side of Aluminum extrusion, and LMV is the instruction to make M hole vertically.
(Additional string meaning L：Left, R：Right, H：Horizontal, V：Vertical)
Please refer to the frame placement standard and instructions below.
• Frame placement standard and instructions
When specifying a hole drilling, please specify "which side of the frame should the machining be done (left or right)" and "horizontal or vertical orientation." For MISUMI Aluminum extrusion, after setting in the prescribed way, the right/left/horizontal/vertical are determined as shown in the figure below.
- Question: Can the perpendicularity of the end face of the Aluminum extrusion be improved by specifying the alteration code "SC" (High precision cut) for the flat milled frame?
- Answer: It does not improve perpendicularity.
(The flat milled frame has a top and bottom parallelism of 0.1/100 and a height T of ± 0.05. SC only improves accuracy of length dimension) - Question: Is it possible to make an M6 hole on the side of the bracket?
- Answer: No. The alteration code "C" (alteration code of cover mounting holes) only supports drilling M5 holes.
- Question: Which part of the Aluminum extrusion will be machined if a tapped hole alteration is specified?
- Answer: The machining location is the part surrounded by red circles in the cross-sectional view of the Aluminum extrusion on the product page. There are two types, center hole and square hole, depending on the cross-sectional shape of the Aluminum extrusion.
- Question: Is it possible to insert a Thread Insert by adding tapped holes to the Aluminum extrusion?
- Answer: Yes.
Please refer to the Aluminum extrusion selection information site. If LHP, RHP, or HPW, is selected, alteration code with Thread Insert can be specified. - Question: Is it possible that Thread Insert is inserted even though Thread Insert insertion (LHR, PHP, HPW) is not specified in the tap hole alteration of the Aluminum extrusion?
- Answer: Yes.
In the case of the Aluminum extrusion 8-45-series, Thread Insert can be inserted even if LTP, RTP, or TPW is not specified, but only when the hole size of the tapped hole is φ12.5 - Question: The tolerance for the length of the Aluminum extrusion is ± 0.5 mm. Is it possible to request cutting with more accurate tolerance?
- Answer: Yes.
By specifying the alternation "SC" of the Aluminum extrusion, the tolerance for the total length L dimension can be changed from ± 0.5 to ± 0.2 mm and cut with high accuracy. However, only a length of 1500 mm or less can be performed.
-
- Question: Please show an example of application on how to attach a linear guide to an Aluminum extrusion.
- Answer: The following is an example of connecting a linear guide using a flat milled frame of an Aluminum extrusion and a long nut.
※The representative product in this example is 6-series, but it can be applied in the same way for Aluminum extrusion and long nut for 5-series and 8-series.
※When using an Aluminum extrusion, please be considering on bending and twisting the material within the range of JIS.
- Question: Please explain about how to mount the Aluminum extrusion vertically on the base plate.
- Answer: There are three methods.
• Set up nut for pre-assembly double joint the base plate and attach the Aluminum extrusion vertically it on the base plate with two bolts of the Aluminum extrusion fitted with lead-in double joint. (Fig.1)
• Make two through holes in the base plate and attach it to the Aluminum extrusion with nuts for lead-in double joint with bolts from under the base plate. (Fig.2)
• Attach with the anchor stand for Aluminum extrusion. (Fig.3)
- Question: Please show an example for application of angled Aluminum extrusion (HFS□□A5)
- Answer: The following is an example of application for angle-taped Aluminum extrusion HFS30A5-20.
-
- Question: Please explain about the types and features of Aluminum extrusion.
- Answer: Materials and features are different depending on type of Aluminum extrusion.
Please refer to the table below.
• Aluminum Extrusion Type and Characteristics
The color of aluminum extrusion may slightly vary depending on the materials. - Question: Please explain about how to select accessories for Aluminum extrusions.
- Answer: When the Aluminum extrusion is selected, available peripheral parts No. will be determined. Use the No. as a guide to select accessories.
• Selection of peripheral parts
When the Aluminum extrusion is selected, available peripheral parts No. will be determined. Use the No. as a guide to select accessories.
- Question: Please explain about how to secure the panel to the Aluminum extrusion.
- Answer: There are three methods of securing the panel to the Aluminum extrusion: bracket mounting, groove fitting, and direct mounting.
- Question: what's the difference between bolt and screw?
- Answer: The screw looks like a bolt, however, it has a shaped tip. The thread of the screw mate with the material. It is turned through to hold the screw in materials such as wood and plastic without using a nut
On the other hand, the bolt is not designed for self-tapping material, so that requires a nut to hold the bolt and object together - Question: Which is nut and which is bolt?
- Answer: The easy way to categorized between nut and bolt is
– Nuts have a screw hole,which has thread inside for example Hex nuts, Flanged nuts, Square nut and etc
– Bolts have an external male thread, which always use with nuts or screw hole for example Hex bolt, T-Bolt , Eye bolt etc. - Question: How many nut types are there?
- Answer: Nuts have varieties of types, sizes and materials for example,
Nut for aluminum profile can categorized by 2 types
1. Post-Assembly: Mountable from slots after assembly such as Free nut, Special T-nuts , Leaf spring T-nut, Ball spring T-nut, T- bolt and so on
2. Pre-Assembly: Insert from the slot ends before assembly such as T-nut, Long T-nut, T-nut with stopper , T-nut with set screw etc. - Question: Does a screw need a nut?
- Answer: When you use screws don't need to use nuts, because the screw has threads spiraling along the length, which can drill and stick to the material without using a nut. On the other hand, bolts need to use with nuts to hold two or more objects together.
- Question: How do you fasten nuts properly?
- Answer: 1. Before using a nut and a bolt need to check both of them have the same size of threads and pitch, for example, bolt size M8x1.5 and nut size M8x1.5 is OK
2. Use hands for tight a bolt and a nut mate together
3. Use a wrench or hex socket wrench to fasten it until tight
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy