Lever（Operation Direction：Horizontal）

Clamp Levers/Threaded

MISUMI

[Features]·One of the most versatile clamp lever. [Clamp Type]Clamping mechanism, "Operating direction" horizontal

• Volume Discount

CAD ：

2D / 3D

Miniature Clamp Levers/Threaded

MISUMI

[Features]·A miniature clamp lever with a short lever.

• Volume Discount

CAD ：

2D / 3D

Resin Clamp Levers/Straight Handle

MISUMI

[Features]·A general-purpose clamp lever. [Material]·Resin type

• Volume Discount

CAD ：

2D / 3D

Miniature Resin Clamp Levers

MISUMI

·A miniature resin clamp lever. [Clamp Type]Clamping mechanism, "Operating direction" horizontal

• Volume Discount

CAD ：

2D / 3D

Flat Clamp Levers

MISUMI

[Features]·It can be used without interference when there is no upper space.

• Volume Discount

CAD ：

2D / 3D

Clamp Lever (FKF, FKR)

IMAO CORPORATION

Machine lever for tightening and loosening screws without tools.[Features]・ In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged.・ After tightening, you can turn the lever freely to any position.・ Can be used in tight places where a lever cannot be turned 360°. ・ After screw tightening, the lever can be moved to an arbitrary position.・ Main unit available in 4 colors (silver, black, red and ...Readmore

CAD ：

2D / 3D

Double Arm Clamp Levers

MISUMI

[Features]·A butterfly-shaped clamp lever. [Material]Available in stainless steel or steel.

• Volume Discount

CAD ：

2D / 3D

Clamp Lever (KF, KR)

IMAO CORPORATION

In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. The standard type that boasts steady popularity.

CAD ：

2D / 3D

Clamp Levers/Threaded/with Washer

MISUMI

[Features]·It is a versatile type clamp lever with a built-in washer

• Volume Discount

CAD ：

2D / 3D

Clamp Levers/with Pad/Radiused Tip

MISUMI

A padded tip SR clamp lever. [Material]Stainless steel / steel

CAD ：

2D / 3D

Push Button Clamp Levers

MISUMI

[Features]·The serration can be easily released by pressing the screw head with your thumb

• Volume Discount

CAD ：

2D / 3D

Clamp Lever LDMS/LDFS

NABEYA BI-TECH

Stainless steel clamp lever[Features]· Stainless steel clamp lever.· 3 color variation (powder coating) or chrome plating.· SG: silver, OR: orange, BK: black, CR chrome plated.· Wide range of screw sizes, from M3 to M16.· A combination of lever turning radius and thread diameter can be selected.· Material/finish, lever: zinc die casting.· Powder coating: SG, BK, OR.· Chrome plated CR.· Screw / setscrew: SUS30.· Spring: Stainless steel copper wire

CAD ：

2D / 3D

Clamp Levers/Stainless Steel/Threaded/Chrome Plated

MISUMI

[Features]·Stainless steel series general-purpose clamp levers.

• Volume Discount

CAD ：

2D / 3D

EALA Ergo Adjuster Clamp Lever (With Hex Socket Head)

IMAO CORPORATION

Lever with curves coordinated design. .Even though the lever part is free, when the lever is pushed down, the serrations can be engaged with each other, so it is possible to prevent contact malfunction after tightening.[Features]· Curved design of the entire lever part gives a comfortable grip feeling.· We accept additional work

CAD ：

2D / 3D

Ratcheting Clamp Levers

MISUMI

Ratchet function allows you to easily change the direction of operation

• Volume Discount

CAD ：

2D / 3D

Safety Resin Clamp Levers

MISUMI

In the normal position, the lever is free, so even if you accidentally turn the lever, the clamp will not loosen.

• Volume Discount

CAD ：

2D / 3D

Platen Clamping Lever_LEM/LEF

NABEYA BI-TECH

Good design award received. Plastic made clamp lever.

CAD ：

2D / 3D

Resin Clamp Levers/Curved Handle

MISUMI

[Features]·A general-purpose clamp lever. [Material]·Resin type

• Volume Discount

CAD ：

2D / 3D

Clamping Lever_LDM/LDF/LDR

NABEYA BI-TECH

Zinc die-cast clamp lever.[Features]·A wide range of screw sizes from M3 to M16.·You can choose the thread material and surface treatment.·The lever part has a matte electrostatic coating that makes scratches less noticeable.·Four color variations are available for the lever. Selectable by the end symbol of the part number.[Applications]·For tightening after adjusting the workpiece position.·Ideal for applications that are frequently open...Readmore

CAD ：

2D / 3D

Clamp Lever_LDMS-NI/LDFS-NI

NABEYA BI-TECH

All stainless steel clamp lever. All parts are made of stainless steel.

CAD ：

2D / 3D

Y-Shaped Clamp Levers

MISUMI

A Y-shaped clamp lever. [Specifications]·Operating direction: horizontal. ·Type of mounting section: male thread.

• Volume Discount

CAD ：

2D / 3D

Plastic Clamp Lever_LUDM/LUDF

NABEYA BI-TECH

Double arm type plastic clamp lever.

CAD ：

2D / 3D

Clamp Lever (SUS) (FKF-SUS/FKR-SUS)

IMAO CORPORATION

With this stainless steel lever handle, the serration that was engaged becomes loose by pulling up on the lever. All stainless steel type and stainless steel screw parts types are available.

CAD ：

2D / 3D

Locking Lever (LL)

IMAO CORPORATION

[Features]· Standard type lever handle that can be used widely.· For grip, PC type door knob is used

CAD ：

2D / 3D

Clamp Nut Lever_LNN

NABEYA BI-TECH

Clamp nut lever for operation.[Features]·Shot blasted with S15C.·Available in 2 materials.·LNN: Made of steel.·LNNS: Made of stainless steel.[Applications]·operating lever.

CAD ：

2D / 3D

Ergostyle Adjustable Clamp Lever (EAL)

IMAO CORPORATION

Lever with curves coordinated design. Normally, the lever part is free, and when the lever is pushed down, the serration can be engaged and operated,which prevents incorrect handling after tightening.[Features]· Curved design of the entire lever part gives a comfortable grip feeling.· Initial tightening work can be done comfortably as the knurling is applied on the lower part of the mail body.· The standard color of the button is or...Readmore

CAD ：

2D / 3D

Resin Clamp Levers/with Push Button

MISUMI

A push-type resin clamp lever. [Material]Stainless steel / steel

• Volume Discount

CAD ：

2D / 3D

Flat Tension Lever_LFM/LFF

NABEYA BI-TECH

[Features]· For locations where there is no clear space up or down.· The handle position can be adjusted freely.· All stainless steel and steel types standard.· Large turning radius and clamping force can be obtained with lesser force.

CAD ：

2D / 3D

Platen Clamping Lever_LEMS/LEFS

NABEYA BI-TECH

Plastic made clamp lever. Uses stainless steel parts.

CAD ：

2D / 3D

Mini Plastic Clamp Lever_LECM/LECF

NABEYA BI-TECH

Compact type plastic clamp lever

CAD ：

2D / 3D

Mini Plastic Clamp Lever_LECMS/LECFS

NABEYA BI-TECH

Compact type plastic clamp lever

CAD ：

2D / 3D

Flat Tension Lever (FTF/FT)

IMAO CORPORATION

In this type, when the lever is pulled the serrations mesh and the lever becomes free. Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.[Features]· Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.· If interference of the lever occurs during operation, a short lever can be installed and used

CAD ：

2D / 3D

All Stainless Steel Clamping Lever SRSS, SFSS

KONISHI

All stainless steel clamp lever used when fixing the position. Since the lever becomes free, when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Since all parts including the lever part are stainless steel, it has excellent rust prevention properties.

CAD ：

2D

Controller Lever MR.p【1-10 Pieces Per Package】

ELESA

【Features】・It is especially suitable when there is not enough space to turn the lever.・MR. The Control Lever can be assembled quickly using an electric or pneumatic screwdriver. ・Related Keywords: ELESA, Lever

CAD ：

2D / 3D

Plastic Clamping Lever_LUDMS/LUDFS

NABEYA BI-TECH

Double arm type plastic clamp lever.

CAD ：

2D / 3D

Clamping Lever KR, KF

KONISHI

Lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Amongst the products with 5 different types of turning radius, select the one that can be used with the appropriate load.

CAD ：

2D

Plastic Clamping Lever VR, VF

KONISHI

Since the lever becomes free when it is lifted upwards and the serration inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Since the lever part is made from polyamide, the weight of the machine can be reduced.

CAD ：

2D

Flat Tension Levers

MISUMI

[Features]·It is a general-purpose flat type tension lever.

• Volume Discount

CAD ：

2D / 3D

Flat Tension Levers/With Hexagonal Socket Head/Threaded

MISUMI

A flat tension lever with a hex socket head. [Clamp Type]Clamp mechanism

• Volume Discount

CAD ：

2D / 3D

Latch Lever_LZY

NABEYA BI-TECH

Clamping lever using spiral latch. Tightening can be adjusted without any steps of moving up and down of lever.

CAD ：

2D / 3D

Control Lever (CL)

IMAO CORPORATION

By using the optional CLB, you can also use the snap method with this lever handle.[Features]· The boss hole can be easily covered with the center plate accessory after installation.· Optional ball & spring can be installed, and snap method can be used.· In order to limit the lever operating angle to 125 ±1°,the groove for the snap pin is provided in the boss.· For grip, PG type is used

CAD ：

2D / 3D

Clamp Lever (FKFT, FKRT)

IMAO CORPORATION

[Features]· When the lever is pulled, the serrations mesh and lever handle becomes free.· The upper part of the boss protrudes, and the lever lifting is easy.

CAD ：

2D / 3D

Mini Clamping Lever MCR, MCF

KONISHI

[Features]· Lever used for fixing the position.· By reducing the turning radius of the lever, it can be used even in places without space.· Lever available in 4 different colors.

CAD ：

2D

Mini-Clamp Lever (Stainless Steel) MCRS, MCFS

KONISHI

[Features]· Lever used for fixing the position.· By reducing the turning radius of the lever, it can be used even in places without space.· Lever comes in 3 different colors.

CAD ：

2D

Clamp Lever, SR, SF

KONISHI

[Features]· Lever used for fixing the position.· Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.· Compared to conventional products, it is easy to use and cheap

CAD ：

2D