Air Tube/Nylon Tube（Material：Urethane Page2）

Urethane Foam Braid Tube (with Coupling for Lock Type Tubing)

TRUSCO NAKAYAMA

[Features]● Superior in oil resistance, pressure-resistance, and flexibility at low temperature (-5°C).● Compatible with common coupling.

Urethane Air Hose (with male swivel thread)

ESCO

[Features]·The swivel type with male thread prevents the hose from kinking.

Water-Resistant Polyurethane TE Twin Touch Tube

CHIYODA

A water-resistant twin-touch type with a line that makes it easy to identify the piping.[Features]・ Use TE tube: Inheriting the features of TE tube as it is・ Includes line on one side: Easy identification of piping・ Quick-connect fittings can be used: Due to special welding, no marks remain when peeling, and connection with a quick-connect fitting is possible

Mega Touch Tube MTP Polyurethane Tube

CHIYODA

A polyurethane tube with a wide inner diameter and a large flow rate.[Features]・ Air leaks are hard to occur and tubes can be attached and removed smoothly・ Can be used for air and industrial water piping・ It has excellent flexibility and the minimum bending radius of the tube is smaller than other tubes, so it can be used for piping in narrow places・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management・ Excellent oil resistance・ Excellent outer diameter accuracy[Application]・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

P-Flex Series, Hot-Water-Resistant Polyurethane Tube

CHIYODA

Polyurethane tube for cooling water.[Features]・ Ideal for cooling water piping. A material that is extremely resistant to hot water, ideal for cooling water piping, and can be used with air・ Excellent oil resistance. Ideal for factory air and industrial water piping・ Excellent outer diameter accuracy. Outer diameter accuracy is listed in the specification column・ Excellent heat resistance・ Excellent flexibility. Very small bend radius and easy to handle[Application]・ Cooling water piping in general (Molds, robots, etc.)

Urethane Braided Tube

TRUSCO NAKAYAMA

[Features]● Approximately 1/3 to 1/5 the weight of a rubber hose.● Superior in oil resistance, pressure-resistance, and flexibility at low temperature (-5°C).

Tubes/Sputter Resisting

MISUMI

Tubes/Sputter ResistingPolyurethane Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 6, 8, 10, and 12● Inner Diameter (mm.) : 4, 5, 6.5, and 8● Length (m.) : 10, 20 and can configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.● Maximum operating pressure (MPa) : 0.8● Operating Temperature Range (℃) : -5 to 60● Material : Incombustible Polyurethane● Color : Black, Red and Green[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

CAD ：

2D / 3D

Coil Hoses/Spiral Tube

MISUMI

Coil Hoses/Spiral TubePolyurethane Tubes are compliant with high flexibility and especially in abrasion resistance. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 8 and 10● Inner Diameter (mm.) : 5, and 6.5● Operating Range Length (mm.) : 800, 1800 and 3700 depends on product code● Maximum operating pressure (MPa) : 1.1● Operating Temperature Range (℃) : -40 to 80● Material : Polyurethane● Color : Orange[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as air gun and so on.

• Volume Discount

CAD ：

2D / 3D

Air Hose/Sliding

MISUMI

[Features]·Its softness and suppleness enable safe and smooth work.

• Volume Discount

CAD ：

2D / 3D

Multi-Straight Tube

CHIYODA

A straight tube that uses a variety of different color variations to make pipe identification easy.[Features]· Directly inherits the features of TP tubing.· Can be connected using a one touch fitting without leaving marks during peeling via special welding .· Pipe identification is made easy through color variation wherein a different color can be used for each pipe.· Ideal for locations where horizontal piping is difficult or when many pipes are used

Multi Spiral Wrap MPS Type

CHIYODA

Colorful air piping multi-core spiral wrap with excellent flexibility.[Features]・ The touch tube is bundled into multiple cores and processed into a coil. Ideal for telescopic piping・ A wide variety (204 standard types) are available. Possible to select according to operating environment・ Both ends of the straight part are 200 mm, allowing fine adjustment of the operating range・ Excellent abrasion resistance・ Inheriting the same features as TP tubes・ Quick-connect fittings can be used[Applications]・ Most suitable for all air pipe drive locations (internal piping, robots, conveyors, etc.)

Strong Spiral Hose

CHIYODA

A high-repulsion spiral hose that prevents sagging.

Spiral Air Hose, Yellow Line SPH Type

CHIYODA

[Features]· Spiral tube with excellent flexibility and oil resistance

Chiyoda Polyurethane Hose

CHIYODA

A soft air Hose suitable for low pressure robot piping.[Features]・ Excellent in oil resistance, ideal for air piping in the factory・ Excellent flexibility・ Very soft tube allows for very easy connection to hose fittings[Applications]・ Most suitable for all air piping (equipment piping, air tools, etc.)

GS-Type Curl Hose

MUROMOTO TEKKO

Use at locations that require flow rate.

Urethane Coil Tube UC/USC/UMC

NITTA

[Features]・ This is a tube made by processing the urethane tube "U2" into a coil shape・ "USC" is a coil tube with a more compact coil outer diameter than "UC"・ "UMC" is a coil tube that enables multiple piping by welding multiple tubes

Urethane Tube for General Air Pressure (High Pressure Type) U1

NITTA

【Features】 · Usable in the pressure area higher than U2 tube Since it uses the coterie based polyurethane resin, deterioration of erosion due to moisture and mold at high temperature and humidity. happens less. Coil machining and welding machining are possible. •Related Keywords: NITTA, Tube / Tube Related Parts

Urethane Multi-line Tube UML

NITTA

Urethane multi-line tube UML is a urethane tube "U2" is a multiple welding processed tube.[Features]・The urethane tube "U2" is a multiple installed tube

Urethane Coiled Hose (CH-15.CH-30)

TRUSCO NAKAYAMA

[Features]● Superior in flexibility, elasticity, oil resistance, chemical resistance, abrasion resistance, heat resistance, and operability.● This urethane air hose utilizes the characteristics of polyurethane material.

Spiral Air Hose (with R1/4 Nipple)

TRUSCO NAKAYAMA

[Features]·Spiral air hose with rubber elasticity and excellent resilience.

Polyurethane Braided Hose Flameproof type with Coupling

TRUSCO NAKAYAMA

[Features]● Made of flame-retardant polyurethane resin to prevent melting and fire due to sparks during sputtering.● Features lightweight, flexibility and abrasion resistance compatible to polyurethane hose for easy handling.● Water-resistant polyurethane outer layer is weatherproof for outdoor use.● Can be cut to the required length for the application and location.[Application]● Controllers for pneumatic devices and instrumentation.

Urethane hose (with coupler) straight type ⌀9.5 1.4 MPa

ESCO

【Product Specifications】・Normal pressure-1.5MPa(15kgf/cm2)・Material-Urethane resin・With a swivel fitting・With a plug and a socket・ID×OD-9.5×13.5mm・Length-15m

Urethane Hose (With Thread/Coupler)

ESCO

【Product Specifications】・Normal pressure-0.69MPa (7kgf/cm2)・ID-5mm ・OD-8mm ・Material-Urethane resin・Specification…G(PF)1/4 screw・Range of use…3m

Tubes/Multi-Spiral Type

MISUMI

Tubes/Multi-Spiral TypePolyurethane Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 8, 10 and 12● Inner Diameter (mm.) : 2, 4, 5, 6.5 and 8● Number of Spiral Core : 2,3 and 4● Operating Range Length Minimum/Maximum (mm.) : 787 to 1920 depends on product code● Maximum operating pressure (MPa) : 0.8● Operating Temperature Range (℃) : -5 to 60● Material : Polyurethane[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as air gun and so on.

• Volume Discount

CAD ：

2D / 3D

Polyurethane Tubes (Orange)

MISUMI

• Volume Discount

CAD ：

2D / 3D

Twin Touch Tube TP Polyurethane Tube

CHIYODA

Lined twin touch type with simplified pipe identification.[Features]· Uses TP tubing: inherits the features of TP tubing.· Simplifies identification of single side lined piping.· One-touch fitting supported: Connectible with a one-touch fitting via a special welding process that leaves no marks during peeling

Slitted Straight Tube

CHIYODA

A slitted straight tube that makes it possible to replace electric wiring.[Features]· Slit machining.· Thanks to the slit on the tube, it is possible to perform wire replacement.· Wire protection.· Best suited for protecting electrical wires from scraping damage within cableveyors, etc., by placing wiring inside air tubes.· One-touch fittings can be used for air piping.· Special orders accepted

Line Spiral Hose

CHIYODA

A lightweight spiral hose with reduced tangling.

Curled Hose with Straight Curl

MUROMOTO TEKKO

The straight part of this hose is long, making it particularly well-suited for operational applications such as heavy equipment and construction machinery as well as production lines that demand long distances. Internal diameter of tube 5, external diameter of tube 8

Urethane Tube for General Air Pressure (Ultra Flexible) U5

NITTA

[Features]▪ Among all urethane tubes, the U5 urethane tube has the least bending stress and excellent workability.▪ Since ether-based polyurethane resin is used, there is less erosion and deformation caused by moisture and mold at high temperature and humidity.▪Barb fittings (bamboo shoot joints) can be used.

Junron UFL (Low Friction Polyurethane Tube)

JUNKOSHA

[Features]・ The surface of the tube is embossed to reduce friction and improve slipperiness・ There is no stickiness on the tube surface, and it has excellent workability in high-density (space-saving) piping・ Reduces wear and noise caused by moving the cable carrier・ Basic characteristics (flexibility, mechanical strength, low elution, low bleed) are equivalent to Junron UF (polyurethane tube)[Applications]・ Tube line for movable parts such as sliding parts・ Tube line in cable carrier・ Space-saving high-density tube line

Urethane Coiled Hose (with Plastic Coupling)

TRUSCO NAKAYAMA

[Features]● Plastic coupling will not damage tools or equipment.● Kink-resistant and superior in abrasion resistance.● Very tough, with excellent flexibility, elasticity, and extension length capability. ● Straight handle part, so there is no need for an auxiliary hand-held hose.

Polyurethane Braided Hose Flameproof type

TRUSCO NAKAYAMA

[Features]● Made of flame-retardant polyurethane resin to prevent melting and fire due to sparks during sputtering.● Features lightweight, flexibility and abrasion resistance compatible to polyurethane hose for easy handling.● Water-resistant polyurethane outer layer is weatherproof for outdoor use.● Can be cut to the required length for the application and location.[Application]● Controllers for pneumatic devices and instrumentation.

Urethane hose (with coupler) straight type ⌀6.5/8 1.5 MPa

ESCO

【Product Specifications】・Normal pressure-1.5MPa (15kgf/cm2)・Material-Urethane resin・ID x OD…8.5 x 12.5mm・Length…10m

Flame-Resistant (Equivalent To UL-94 Standard V-0) FR Three-Layer Polyurethane Tubing, TRTU Series

SMC

Triple-layered, flame-resistant (equivalent to UL-94 standard V-0) polyurethane tubing, TRTU series. [Features]· Includes an aluminum layer between the outer sheath and the inner tube for improved spatter resistance. [Applications]· Suitable for air and water piping in environments with sparks from arc welders, etc.

Abrasion Resistant Tube, ARU

AOI

[Features]・ It has greater flexibility than conventional urethane tubes and has significantly improved abrasion resistance.・ With a special manufacturing method, the surface of the tube is finished with a matte finish (matte) to reduce the abrasion resistance on the surface of the tube, so smooth movement can be obtained even in movable parts. (Since the inner surface remains smooth, it does not affect the fluid pressure loss. )・ Excellent water resistance due to the use of ether (PTMG) polyurethane material.

Tubes/Flat Type

MISUMI

[Features]·A flat tube for multiple piping of double-acting cylinders.

• Volume Discount

CAD ：

2D / 3D

Tubes/Antistatic Type

MISUMI

[Features]·Tube suitable for piping in environments where static electricity should be avoided.

• Volume Discount

CAD ：

2D / 3D

Tubes - Slit Spriral with Fluoro-Insulated Wire

MISUMI

[Features]This product can expand and contract at will to follow the direct movement of slide units, etc. It has slits on the side of the tube for easy insertion and removal of cables.

• Volume Discount

CAD ：

2D / 3D

Tubes/Water Resisting Polyurethane Spiral Type

MISUMI

Tubes/Water Resisting Polyurethane Spiral TypeAir Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 8, 10 and 12● Inner Diameter (mm.) : 2 , 4 , 5, 6.5 and 8● Operating Range Length Minimum/Maximum (mm.) : 700 to 3100● Operating Temperature Range (℃) : -5 to 60● Material : Polyurethane● Color : White[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as air guns and so on.

CAD ：

2D / 3D

Urethane Tubes, TE Series

TAIYO

Features excellent flexibility. Has excellent diametral accuracy and is safe for use with single-touch fittings.[Features]• The burst pressure is as high as 3.0 MPa (at 20°C), allowing for use in a wide range of applications.· Excellent flexibility.• The bending radius is smaller than conventional types.• A series of ⌀12 types are also available.• Has excellent diametral accuracy and is safe for use with single-touch fittings.

SP Soft Polyurethane Touch Tube Spiral

CHIYODA

Spiral type soft tube.[Features]· Use of SP tube: inherits the features of the SP tube as-is

Water Resistant Multi-Spiral Tubes MES Series

CHIYODA

These spiral tubes feature superior water resistance.

Slit Spiral Wrap 3-SSE Type

CHIYODA

Slit spiral wrap with replaceable cables.[Features]・ Slit processing. Cables can be replaced by slitting the tube・ Electric cable protection. Optimal for protection by rubbing the wire inside the cable carrier by putting the wire in the air tube・ Quick-connect fittings can be used for air piping

Air Tool Sputter Preventing Spiral Hose Tough Coil

CHIYODA

Sputter-preventing spiral tube with excellent flame retardant properties and oil resistance.[Features]· Long-life and durable against sparks, chipping, etc. as compared to spirals used in TPS, etc. · Suitable for air piping inside factories