Air Tube/Nylon Tube（Applicable Fluid：Air Page3）

ALE Type L-Flex Spatter-Resistant Tube

CHIYODA

[Features]· Inner TE tube. The features of TP tubes are all inherited. At welding sites, the tube can be used for both air and cooling water (industrial water) without separation・ Wide color variations. Convenient for pipe management・ 3-layer tube. The LE inner is coated with an aluminum film to further improve spatter resistance and the strongest specification for sputter tubes

Crown Light Eco Tube

KOKUGO

Semi-transparent tube that is very flexible and simplifies piping. Complies with the Japan Food Sanitation Law.[Features]· Compliant with Ministry of Health, Labor and Welfare Notification 20 (food hygiene), excluding n-heptane.· Excellent cold and heat resistance.· Easily withstands sterilization.· Very flexible with simplifying piping.· Being semi-transparent, fluid can be viewed while inside.· Countermeasures against dioxins implemented.· S...Readmore

Coiled Hose

MUROMOTO TEKKO

Small wound diameter at φ28mm. Offers a wide range of uses, including air-driven equipment. Internal diameter of tube 5, external diameter 8.

Urethane Tube for General Air Pressure (High Pressure Type) U1

NITTA

【Features】 · Usable in the pressure area higher than U2 tube Since it uses the coterie based polyurethane resin, deterioration of erosion due to moisture and mold at high temperature and humidity. happens less. Coil machining and welding machining are possible. •Related Keywords: NITTA, Tube / Tube Related Parts

Urethane Tube for General Air Pressure (Ultra Flexible) U5

NITTA

[Features]▪ Among all urethane tubes, the U5 urethane tube has the least bending stress and excellent workability.▪ Since ether-based polyurethane resin is used, there is less erosion and deformation caused by moisture and mold at high temperature and humidity.▪Barb fittings (bamboo shoot joints) can be used.

Urethane Multi-line Tube UML

NITTA

Urethane multi-line tube UML is a urethane tube "U2" is a multiple welding processed tube.[Features]・The urethane tube "U2" is a multiple installed tube

Polyolefin Resin Tube Clean Pipes (Flexible) PL

NITTA

[Features]・ A clean tube that uses clean air, N2 gas, pure water, or various chemicals,etc., as a fluid, and is suitable for installation and applications.・ Environmentally friendly eco-type tube. Carbon dioxide is the only gas generated during incineration (750°C), and no toxic gases such as nitrogen oxides (NOx) and sulfur oxides (SOx) are generated. No dioxin is generated・ Manufactured in a cleanroom, the tube terminal is sealed with a cap, ...Readmore

Junflon Sputtering Tube (Tube for Spot Welder), Junflon SPF (Three-Layer Sputtering Tube)

JUNKOSHA

Exhibits excellent durability against sparks and shocks generated from welding equipment. High flexibility, and with excellent weather and water resistance.

Junron UF (Water-Resistant Flexible Polyurethane Tube)

JUNKOSHA

[Features]・ Excellent mechanical strength, especially abrasion resistance・ It has excellent heat and cold resistance・ Resin no-load continuous operating temperature -40 to +80°C・ Flexible and has high impact resilience・ No risk of elution of toxic substances・ Small bending radius and excellent workability[Application]・ Tube for pneumatic equipment・ Tube for fluid element・ Pneumatic tube for chemical plant

Urethane Coiled Hose (UCH)

TRUSCO NAKAYAMA

[[Features]]● Kink-resistant and superior in abrasion resistance.● Superior flexibility, elasticity, and extension length capability, yet tough.●The handle is straight, so a handle hose is unnecessary.●It is coiled, widely expanding the range of work that can be done.

Oxygen Hose (Blue/Rubber)

ESCO

【Product Specifications】・Normal pressure-0.98MPa (10kgf/cm2)・Max. pressure-2MPa・Material-Natural rubber・ID x OD…9.5 x 16.5mm・Length…10m

Air hose (With coupler/PVC)

ESCO

[Features]·It is flexible, slippery, lightweight and has excellent operability. ·Normal pressure: 1.5 MPa.

Flame-Resistant (Equivalent To UL-94 Standard V-0) FR Three-Layer Polyurethane Tubing, TRTU Series

SMC

Triple-layered, flame-resistant (equivalent to UL-94 standard V-0) polyurethane tubing, TRTU series. [Features]· Includes an aluminum layer between the outer sheath and the inner tube for improved spatter resistance. [Applications]· Suitable for air and water piping in environments with sparks from arc welders, etc.

Antistatic Tubing TA Series

SMC

Tubing to which measures against static electricity have been applied. [Features]· Maximum operating pressure 1.2 MPa or less (at 20°C).· For pneumatic piping and applications which require measures against static electricity.· Flame-retardant tubing (equivalent to UL-94 standard V-0).· Fluid: air.· Color: black. [Applications]· For preventing static electricity.

Air Hose/Sliding

MISUMI

[Features]·Its softness and suppleness enable safe and smooth work.

• Volume Discount

CAD ：

2D / 3D

Air Hoses/High-Flex

MISUMI

[Features]·Soft and easy to insert metal fittings. It doesn't get sticky with oil.

• Volume Discount

CAD ：

2D / 3D

Soft Nylon Tubes, SN Series

KOGANEI

Features excellent water resistance, dimensional stability, and weather resistance, as well as flexibility[Features]· Flexibility is added while maintaining the properties of a nylon tube with excellent water resistance, dimensional stability, and weather resistance.

Multi-Core Straight Flat Tube for General Piping

PISCO

Flat tubes ideal for filling machine-related specifications.[Features]·Multiple pipes such as double-acting drive equipment can be neat and clean.·UQ using flexible polyurethane tube and UCQ using ultra-soft polyurethane tube are available.·In the case of black with 2 cores, an identification line is printed on one side of the tube to prevent piping mistakes.·Cut marks are displayed at intervals of approx. 500 mm, which is useful when cut...Readmore

The Anti-Static Straight Anti-Static Tube

PISCO

Tube using a static electricity dissipation resin.[Features]·Uses conductive resin.·Ideal for manufacturing and assembly lines that require antistatic performance.·Cut marks are displayed at intervals of approx. 500 mm, which is useful when cutting the tube.[Application]·Semiconductor related.

Urethane Tubes, TE Series

TAIYO

Features excellent flexibility. Has excellent diametral accuracy and is safe for use with single-touch fittings.[Features]• The burst pressure is as high as 3.0 MPa (at 20°C), allowing for use in a wide range of applications.· Excellent flexibility.• The bending radius is smaller than conventional types.• A series of ⌀12 types are also available.• Has excellent diametral accuracy and is safe for use with single-touch fittings.

Nylon Tube, N2 Series

TAIYO

[Features]▪ Uses special nylon material and offers excellent pressure, corrosion, and heat resistance.▪ Can be used at temperatures of up to 100°C.▪ Lightweight and with excellent flexibility.▪ Can be used for a wide range of fluids.

Twin Touch Tube TP Polyurethane Tube

CHIYODA

Lined twin touch type with simplified pipe identification.[Features]· Uses TP tubing: inherits the features of TP tubing.· Simplifies identification of single side lined piping.· One-touch fitting supported: Connectible with a one-touch fitting via a special welding process that leaves no marks during peeling

Mega Touch Tube MTP Polyurethane Tube

CHIYODA

A polyurethane tube with a wide inner diameter and a large flow rate.[Features]・ Air leaks are hard to occur and tubes can be attached and removed smoothly・ Can be used for air and industrial water piping・ It has excellent flexibility and the minimum bending radius of the tube is smaller than other tubes, so it can be used for piping in narrow places・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management・ Ex...Readmore

Touch Tubing, SP Soft Polyurethane Tubing

CHIYODA

Soft urethane tube suitable for drive equipment.[Features]·The one of the most flexible of all Chiyoda polyurethane tubes.·Dedicated to the tube outer diameter of 4 and 6 mm.·The use of inner support makes it compatible with quick-connect fitting.·Excellent oil resistance and ideal for air piping in factories.・ Excellent outer diameter accuracy.[Application]·Ideal for piping in small places.·Convenient for various types of air piping (piping i...Readmore

SP Soft Polyurethane Touch Tube Spiral

CHIYODA

Spiral type soft tube.[Features]· Use of SP tube: inherits the features of the SP tube as-is

Multi-Flat Tubes

CHIYODA

A flat tube with abundant color variations for easy identification.

Multi-Straight Tube

CHIYODA

A straight tube that uses a variety of different color variations to make pipe identification easy.[Features]· Directly inherits the features of TP tubing.· Can be connected using a one touch fitting without leaving marks during peeling via special welding .· Pipe identification is made easy through color variation wherein a different color can be used for each pipe.· Ideal for locations where horizontal piping is difficult or when many pipes are used

Multi Spiral Wrap MPS Type

CHIYODA

Colorful air piping multi-core spiral wrap with excellent flexibility.[Features]・ The touch tube is bundled into multiple cores and processed into a coil. Ideal for telescopic piping・ A wide variety (204 standard types) are available. Possible to select according to operating environment・ Both ends of the straight part are 200 mm, allowing fine adjustment of the operating range・ Excellent abrasion resistance・ Inheriting the same features as TP tubes・...Readmore

Slitted Straight Tube

CHIYODA

A slitted straight tube that makes it possible to replace electric wiring.[Features]· Slit machining.· Thanks to the slit on the tube, it is possible to perform wire replacement.· Wire protection.· Best suited for protecting electrical wires from scraping damage within cableveyors, etc., by placing wiring inside air tubes.· One-touch fittings can be used for air piping.· Special orders accepted

Twin L-Flex Sputter Preventing Polyurethane Tube

CHIYODA

[Features]· Directly inherits the features of the TE tube.· A sputter-preventing tube optimal for in-out piping

Cover Tube Spatter Preventing Polyurethane Tube

CHIYODA

Sputter prevention tube which uses chloroprene rubber on the outer skin. [Features]· For air only; directly inherits the features of TP inner. · Wide range of color variation, which is convenient for pipe management. · Two-layer tube with chloroprene rubber used for the outer skin

Strong Spiral Hose

CHIYODA

A high-repulsion spiral hose that prevents sagging.

Air Tool Sputter Preventing Spiral Hose Tough Coil

CHIYODA

Sputter-preventing spiral tube with excellent flame retardant properties and oil resistance.[Features]· Long-life and durable against sparks, chipping, etc. as compared to spirals used in TPS, etc. · Suitable for air piping inside factories

Spiral Air Hose, Yellow Line SPH Type

CHIYODA

[Features]· Spiral tube with excellent flexibility and oil resistance

Zero One Series Spiral Zero One

CHIYODA

A thin, light and soft spiral tube.

Line Spiral Hose

CHIYODA

A lightweight spiral hose with reduced tangling.

Ultra-Lightweight Spiral Hose 705

CHIYODA

Ultra lightweight spiral hose.[Features]・ Weight reduction of 25% using a special tube・ High elasticity polyurethane material is used to improve springiness and durability・ The fitting has a nickel-plated finish to improve corrosion resistance[Applications]・ Ideal for places where air dusters are used・ For places where weight reduction is required

Toaron G Tube

KOKUGO

Transparent tube with superior chemical resistance.[Features]· Has ultra-high elasticity, transparency, and superior cold resistance.· Has superior chemical resistance, weather resistance, ozone resistance, sulfidation resistance, and superior repeated compressibility characteristics.· The operating temperature range is -40℃ to +70℃

GS-Type Curl Hose

MUROMOTO TEKKO

Use at locations that require flow rate.

Curl Hose SE Type

MUROMOTO TEKKO

This is used for general factory production lines with straight component lengthened on the manual side. Internal diameter of tube 5, external diameter of tube 8[Features]· Breakthrough air hose whose standard product has just φ28 mm outer diameter by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.· Light and easy to handle thanks to φ28 mm outer diameter (standard ...Readmore

Straight Hose

MUROMOTO TEKKO

Can be used separately. Tube with 5-mm internal diameter x 8-mm external diameter; available cut lengths: 2 m, 3 m, 5 m, 7 m, and 10 m.[Features]· Breakthrough air hose with an outer diameter of just 28 mm achieved by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.· Light and easy to handle thanks to the 28 mm outer diameter (standard type).· Thanks to the free expans...Readmore

Curled Hose with Straight Curl

MUROMOTO TEKKO

The straight part of this hose is long, making it particularly well-suited for operational applications such as heavy equipment and construction machinery as well as production lines that demand long distances. Internal diameter of tube 5, external diameter of tube 8

Stretch Curl Hose, LS Type

MUROMOTO TEKKO

The thick middle curl is highly extensible, giving it good operability when a given flow rate is necessary. Internal diameter of tube 5, external diameter 8.

Thickly Wound Curl Hose

MUROMOTO TEKKO

Wide wound diameter at φ56mm; the coiled part can be extended up to 10 times its length, allowing a wide range of applications. Internal diameter of tube 5, external diameter 8.

Thick-Diameter Curl Hose, GSL Type

MUROMOTO TEKKO

Suited for work requiring a short total length in the curled part and a large flow rate (when the flow rate of the current hose is insufficient). Tube internal diameter × external diameter = 8 × 12