Air Tube/Nylon Tube（Page5）

Urethane Hose with Fitting EA125CN-4

ESCO

【Product Specifications】・Material-Urethane resin・Max. operating pressure-0.68MPa・Fitting-Male R (PT) 1/4 x female G (PF) 1/4・Service temperature： -20 to 70℃・Excellent in mechanical strength and pressure, abrasion, bending fatigue, heat, and low-temperatureresistances・ID x OD…8 x 12mm・Range of use…4m

Soft Urethane Tube EA125DB-10

ESCO

【Product Specifications】・Length-20m・Applicable fluid-Air, water・Operating temperature-Air： -40 to 80℃ Water： 0 to 60℃ (no freezing)・OD x ID…10 x 6.5mm・Max pressure…0.8MPa・Color…White

Zip tie (for tubes)【10 Pieces Per Package】

ESCO

【Product Specifications】・Material-Polypropylene(only EA125DZ-42 Polyamide)・It easily and neatly binds by only tucking down multiple tubes.・Provided with holes for fixing the cable tie・Tube dia.-4mm・Unity number-2 pcs

Air hose (With swivel fittings, PVC)

ESCO

【Product Specifications】・Normal pressure-0.98MPa ・Material-PVC・Thread size-R1/4(Swivel type)・With Plug・ID.xOD.-8.5x12.5mm・Length-1.5m

[PTFE] Fluororesin Tube EA125FC-5A

ESCO

【Product Specifications】・Material-Fluororesin ・Max operating temperature-260℃・Operating pressure (normal temperature)・Characteristics-Excellent electric insulation and heat, adhesion, and chemical resistances・OD x ID…5 x 4mm・Length…5m・Pressure(MPa)…0.8

[PFA] Fluororesin Tube EA125FH-8C

ESCO

【Product Specifications】・Material-Fluororesin (PFA)・Operating temperature：-65℃ to 180℃・Color-Semitransparent・Max operating pressure (23℃)・Weather-resistant and nonflammable・Inactive against most chemicals and solvents・It hardly adheres to most materials and even if it adheres, it can be removed easily.・OD x ID…8 x 6mm・Length…20m・Max pressure(MPa)…1.0

Oil-Resistant Fuel Tube EA125JA-25

ESCO

【Product Specifications】・Material-PVC・Service temperature range-0 to 60℃・For piping tube of small engines, farm equipment, and machines・Clear type that allows for fluid check・ID x OD(mm)…25 x 31・Max. pressure (MPa)…0.30・Length…15m

Nylon tube (Flexible)

ESCO

[Features]·With excellent heat resistant, cold resistant, pressure resistant, abrasion resistant], flex fatigue resistant, etc.

Hose Cutter EA338A-13

ESCO

【Product Specifications】・Material-Body：plastic, Blade：Stainless steel・Cutting capacity-Dia.3 to 13mm・Length-115mm

PP 3-Way Faucet EA425KB-12

ESCO

【Product Specifications】・Material-Polypropylene・Applicable fluid- Liquid・OD…12mm

Connector (Straight type/PP)

ESCO

[Features]·3 sizes of hose can be connected. [Materials]Polypropylene

(PVC) Vinyl Tie EA475VA-6

ESCO

【Product Specifications】・Dim-4mm x 600m・Material-Steel + PVC・Color-OD Green

Rubber Tie EA475WN-4【2 Pieces Per Package】

ESCO

【Product Specifications】・Materials-Rubber, carbon steel wire・Weather-resistant・Can be used for various applications such as bundling and hanging cords.・Usable repeatedly・Length-457mm・Color-Black・Qty. per unit-2 pcs

PVC Adhesive EA935CA-100A

ESCO

【Product Specifications】・Capacity-100g・For general pipe(VP,VU)・Quick-drying and low-viscosity type・With brush・Meet Japan water works association standard(JWWA-S101)

Flame-Resistant (Equivalent To UL-94 Standard V-0) FR Three-Layer Polyurethane Tubing, TRTU Series

SMC

Triple-layered, flame-resistant (equivalent to UL-94 standard V-0) polyurethane tubing, TRTU series. [Features]· Includes an aluminum layer between the outer sheath and the inner tube for improved spatter resistance. [Applications]· Suitable for air and water piping in environments with sparks from arc welders, etc.

Flame Retardant (Equivalent To UL-94 Standard V-0) FR Double Layer Tubing TRB Series

SMC

Tubing with a 2-layer structure. [Features]· Double-layer design using flame-retardant resin (equivalent to UL-94 Standard V-0) for outer layer.· Fluid: air, water.· Colors: black, white, red, blue, yellow, green. [Applications]· Suitable for air and water piping in environments with sparks from spot welders, etc.

Polyurethane Coil Tubing 10-TCU Series, For Flexible Tubing

SMC

Polyurethane coil tube for flexible and movable tubing. [Features] · Makes compact piping possible. · RoHS compliant. · Fluid: air. · Maximum operating pressure (at 20°C): 0.8 MPa. · Operating temperature: -20 to +60°C. · Material: polyurethane. · Color: black. · Cleanliness class (ISO class): class 3.

Clean Tubing, Polyolefin Tubing, TPH Series (20 m / 100 m)

SMC

A RoHS-compliant clean tube. [Features] · Applicable fittings: clean one-touch fitting, metal one-touch fitting KQB2 Series. · Applicable fittings: SUS316 one-touch fittings KQG2 series, insert fittings. · Colors: white (material color) / black (opaque) / red (opaque) / blue (opaque) / yellow (opaque) / green (opaque). · Length: 20 m roll / 100 m roll.

Clean / Antistatic Tube ES

NITTA

[Features]・ It is a clean tube that has antistatic properties and is suitable for fluids such as clean air, N2 gas, refrigerants. (It can be used in a cleanroom environment)・ It has no elution of antistatic agents and has a surface resistance rate of 10^11 Ω/sq. or less.・ It has the flexibility equivalent to PL.・ Manufactured in a cleanroom, the tube end is sealed with a cap and heat sealed.・ It is economical compared to fluoropolymer tubes.

Tubes/Flat Type

MISUMI

[Features]·A flat tube for multiple piping of double-acting cylinders.

• Volume Discount

CAD ：

2D / 3D

Tubes/Soft Fluororesin Type

MISUMI

Tubes/Soft Fluororesin TypeAir Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 9 and 12● Inner Diameter (mm.) : 2 , 4 , 6, and 8● Length (m.) : configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.● Operating Temperature Range (℃) : -20 to 80● Material : Fluororesin (ETFE)● Color : White[Application]Fluororesin Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

• Volume Discount

CAD ：

2D / 3D

Tubes/Antistatic Type

MISUMI

[Features]·Tube suitable for piping in environments where static electricity should be avoided.

• Volume Discount

CAD ：

2D / 3D

Tube Items/Tube Clips

MISUMI

A tube clip. [Material]SUS304D/SPCC

• Volume Discount

CAD ：

2D / 3D

Tubes - Slit Spriral with Fluoro-Insulated Wire

MISUMI

[Features]This product can expand and contract at will to follow the direct movement of slide units, etc. It has slits on the side of the tube for easy insertion and removal of cables.

• Volume Discount

CAD ：

2D / 3D

Tubes/Water Resisting Polyurethane Spiral Type

MISUMI

Tubes/Water Resisting Polyurethane Spiral TypeAir Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.[Feature]● Outer Diameter (mm.) : 4, 6, 8, 10 and 12● Inner Diameter (mm.) : 2 , 4 , 5, 6.5 and 8● Operating Range Length Minimum/Maximum (mm.) : 700 to 3100● Operating Temperature Range (℃) : -5 to 60● Material : Polyurethane● Color : White[Application]This Polyurethane Tube is used to connect with pneumatic equipments such as air guns and so on.

CAD ：

2D / 3D

Soft Nylon Tubes, SN Series

KOGANEI

Features excellent water resistance, dimensional stability, and weather resistance, as well as flexibility[Features]· Flexibility is added while maintaining the properties of a nylon tube with excellent water resistance, dimensional stability, and weather resistance.

Tube Bolt / TH Series【10 Pieces Per Package】

KOGANEI

Can easily connect multiple tubes. Usable under NCU specification.

Connector Connector Band

PISCO

Multiple connectors should be used.[Features]· Multiple tubes can be connected or disconnected at once with this connector.· A connector band can be used, and multiple connectors can be combined together.

Tube Cutter, Replacement Blade for Tube Cutter【10 Pieces Per Package】

PISCO

Tube Cutter, Replacement Blade for Tube CutterThis replacement blade is equipment for an air tube cutter model TC-21, branded PISCO[Feature]● Blade position : two cutting edges opposite side● Caution :- Ensure that the mounting screws are tightened properly when replacing a blade to prevent the risk of injury- This blade can be used for cutting only tube. Do not use it for cutting an electric wire, a steel pipe and so on[Application]It is a replacement blade for Pisco tube cutter TC-21.

Cable Tie【10 Pieces Per Package】

PISCO

Tie tubes just by clamping them.

Urethane Tubes, TE Series

TAIYO

Features excellent flexibility. Has excellent diametral accuracy and is safe for use with single-touch fittings.[Features]• The burst pressure is as high as 3.0 MPa (at 20°C), allowing for use in a wide range of applications.· Excellent flexibility.• The bending radius is smaller than conventional types.• A series of ⌀12 types are also available.• Has excellent diametral accuracy and is safe for use with single-touch fittings.

Twin Touch Tube TP Polyurethane Tube

CHIYODA

Lined twin touch type with simplified pipe identification.[Features]· Uses TP tubing: inherits the features of TP tubing.· Simplifies identification of single side lined piping.· One-touch fitting supported: Connectible with a one-touch fitting via a special welding process that leaves no marks during peeling

SP Soft Polyurethane Touch Tube Spiral

CHIYODA

Spiral type soft tube.[Features]· Use of SP tube: inherits the features of the SP tube as-is

Water Resistant Multi-Spiral Tubes MES Series

CHIYODA

These spiral tubes feature superior water resistance.

Slit Spiral Wrap 3-SSE Type

CHIYODA

Slit spiral wrap with replaceable cables.[Features]・ Slit processing. Cables can be replaced by slitting the tube・ Electric cable protection. Optimal for protection by rubbing the wire inside the cable carrier by putting the wire in the air tube・ Quick-connect fittings can be used for air piping

Twin L-Flex Sputter Preventing Polyurethane Tube

CHIYODA

[Features]· Directly inherits the features of the TE tube.· A sputter-preventing tube optimal for in-out piping

Slim L-Flex Sputter Preventing Polyurethane Tube

CHIYODA

Tube with flexibility in addition to sputtering resistance. [Features]· Achieves both sputtering resistance and flexibility. By thinning the outer skin of a conventional L-Flex tube, sputtering resistance is improved and excellent flexibility is provided. · Lightweight 25% lighter weight compared to conventional L-Flex tubing. · Excellent outer skin peeling properties. The outer skin is easier to peel and construction is easier than with conventional two-layer tubing

Zip wrap

CHIYODA

Zip wrap that is easy to slit and handle. [Features]· No need for tube wrapping allowing work time to be reduced. · Freely track bending of equipment with side slitting. · Removal and repeated use are supported. · Made from nylon 6, which has excellent heat resistance, oil resistance, and chemical resistance

Tube Cutter, TC-16【1-10 Pieces Per Package】

CHIYODA

A utility knife that cuts air tubes and hoses at right angles.[Features]・ The cut surface of the tube can be cut cleanly to prevent air leakage・ Easy right angle cut. You can cut it at a right angle just by setting the tube・ Easy cut. You can cut polyurethane, nylon, fluoropolymer tube, etc., with a light force・ You can check the cut surface with the transparent body. You can cut while checking the cut part of the tube・ Easy replacement of bladesCan be replaced with a single cross-head screwdriver (1 screw specification)・ Wide size compatible. One model can support up to ø3 to 16[Applications]・ Convenient for cutting polyurethane, nylon, fluoropolymer tubes, etc.

Air Tool Sputter Preventing Spiral Hose Tough Coil

CHIYODA

Sputter-preventing spiral tube with excellent flame retardant properties and oil resistance.[Features]· Long-life and durable against sparks, chipping, etc. as compared to spirals used in TPS, etc. · Suitable for air piping inside factories

Zero One Series Spiral Zero One

CHIYODA

A thin, light and soft spiral tube.

Ultra-Lightweight Spiral Hose 705

CHIYODA

Ultra lightweight spiral hose.[Features]・ Weight reduction of 25% using a special tube・ High elasticity polyurethane material is used to improve springiness and durability・ The fitting has a nickel-plated finish to improve corrosion resistance[Applications]・ Ideal for places where air dusters are used・ For places where weight reduction is required

Curl Hose SE Type

MUROMOTO TEKKO

This is used for general factory production lines with straight component lengthened on the manual side. Internal diameter of tube 5, external diameter of tube 8[Features]· Breakthrough air hose whose standard product has just φ28 mm outer diameter by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.· Light and easy to handle thanks to φ28 mm outer diameter (standard type).· Thanks to the free expansion and contraction and its light weight (1/3 of rubber hose), the grip operation is easy and no fatigue feeling is given to workers.· It is highly resilient, and will not pose any problems from going through severe repeated testing that entails running over it with a truck, etc.▪ 3 to 5 times abrasion resistance compared to rubber hose.▪ Chemical resistance (30 days): Ideal material that can withstand almost all chemicals other than Hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, Chlorine and benzaldehyde is used.・Heat resistance 70°C .▪ Cold-resistance: Does not lose its flexibility even at -10°C.▪ Can withstand expansion/contraction tests performed at an air pressure of 0.7 MPa for more than 300, 000 times without any regularities.▪ With smaller outer curling diameter and straight wires of a constant dimensions at both ends of the hose, the hose does not break even when handled roughly.▪ As the hose color is pale green, it is easy on the eyes

Jumbo Curled Hose

MUROMOTO TEKKO

Semi-braided hose with a pressure resistance capable of withstanding air pressures up to 1.5 Mpa. Suitable for gas stations and car repair shops.[Features]・· Light and easy to handle thanks to φ28 mm outer diameter (standard type).· Thanks to its ability to be freely expanded/contracted and its light weight (1/3 that of the rubber hose), grip operation is easy, helping alleviate fatigue in workers.· It is highly resilient, and stands up, problem-free, to repeated testing, including being run-over by trucks etc.▪ Offers 3 to 5 times the abrasion resistance of the rubber hose.▪ Chemical resistance (30 days): Uses material able to withstand almost all chemicals except hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, chlorine and benzaldehyde.· Heat resistance 70°C.▪ Cold-resistance: Does not lose its flexibility, even at -10°C.▪ Can withstand over 300, 000 expansion/contraction tests performed at air pressures of 0.7 MPa without displaying any abnormalities.▪ With a small outer curling diameter and straight wires with set dimensions at both ends of the hose, the hose will not break, even when handled roughly.· Its pale green color is easy on the eyes.

Straight Hose

MUROMOTO TEKKO

Can be used separately. Tube with 5-mm internal diameter x 8-mm external diameter; available cut lengths: 2 m, 3 m, 5 m, 7 m, and 10 m.[Features]· Breakthrough air hose with an outer diameter of just 28 mm achieved by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.· Light and easy to handle thanks to the 28 mm outer diameter (standard type).· Thanks to the free expansion and contraction and lightweight (1/3rd rubber hose), the product is easy to grip.· It is highly resilient, and will withstand severe repeated application of force, such as running over it with a truck.· Abrasion resistance three to five times superior than a rubber hose.· Chemical resistance (30 days): Ideal material that can withstand almost all chemicals other than Hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, Chlorine, and benzaldehyde.· Heat resistance: 70°C .· Cold-resistance: Does not lose flexibility even at -10°C.· Can withstand expansion/contraction performed at air pressure of 0.7 MPa more than 300, 000 times without any abnormalities.· With smaller outer curling diameter and straight tubing of a constant dimension at both ends of the hose, the hose does not break even when handled roughly.· Attractive pale green color.