Sanitary Fittings（Nominal O.D. D Range：5.5S~6.5S）

• You can add up to 6 items per a category to the compare list. Compare

  

  Weld Ferrule

  OSAKA SANITARY

  It is a sanitary ferrule made in Japan, conforming to the ISO standard.[Features]・ ISO standard clamp union fittings are unions that are assembled by sandwiching a gasket with ferrules and tightening with a clamp・ The union has a structure where the inner surface of the pipe and the sealing surface match when tightened・ Welded screw union is joined with sanitary pipe by argon arc TIG welding. The inner and outer diameters of the welded part are in accordance with JIS G 3447 stainless steel copper sanitary pipe dimensions・ The expand band type screw union pushes the pipe with the tube expander and joins the fitting・ Welded type: 1.0 MPa or less, expandable type: 0.2 MPa or less

  CAD ：

  2D

  Type	Fitting Shape	Nominal O.D. D Range	Fitting Material	Connection Type 1 (Left or Large Diameter Side)	Surface Finish	Connection Type 2 (Right or Small Diameter Side)	Nominal O.D. D(Ø)	Dia., Center	Connection Type (between Equal Type/Dia. Fittings)	Combination of Tee and Cross at Connecting Part (A-B-C)
  Fitting	Straight	5.5S~6.5S	SUS304 / SUS316L	ISO Ferrule Union	Machined Finishing	Weld-On	-	Equal Dia., Concentric	-	-

  From: 1,929,178 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ferrule Gasket Type B

  OSAKA SANITARY

  [Features]・ Very little liquid penetration, significantly reducing the odor of the gasket・ Ideal when introducing HACCP・ Very low extract from the material, ideal for ultraclean processes・ Maintains rubber properties even at high temperatures・ Sufficient sealing is possible even in the steam line (Operating temperature 145°C or less)・ It has excellent sealing performance at high temperatures and can be used for aseptic lines and aseptic systems・ Can be used for most chemicals that were difficult to use with conventional rubber・ Can be used without problems for the following chemicals・ ex. Sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  Type	Fitting Shape	Nominal O.D. D Range	Fitting Material	Connection Type 1 (Left or Large Diameter Side)	Surface Finish	Connection Type 2 (Right or Small Diameter Side)	Nominal O.D. D(Ø)	Dia., Center	Connection Type (between Equal Type/Dia. Fittings)	Combination of Tee and Cross at Connecting Part (A-B-C)
  Gaskets	-	5.5S~6.5S	-	-	-	-	-	-	-	-

  From: 262,831 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ferrule Cap

  OSAKA SANITARY

  [Features]·A convenient sanitary ferrule cap. [Materials]SUS304/SUS316L

  Type	Fitting Shape	Nominal O.D. D Range	Fitting Material	Connection Type 1 (Left or Large Diameter Side)	Surface Finish	Connection Type 2 (Right or Small Diameter Side)	Nominal O.D. D(Ø)	Dia., Center	Connection Type (between Equal Type/Dia. Fittings)	Combination of Tee and Cross at Connecting Part (A-B-C)
  Fitting	Cap	5.5S~6.5S	SUS304 / SUS316L	ISO Ferrule Union	Only Outer Surface Grinding	-	-	-	-	-

  From: 2,551,223 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Welded Elbows

  OSAKA SANITARY

  [Features]·A sanitary elbow compliant with ISO standard.

  CAD ：

  2D

  Type	Fitting Shape	Nominal O.D. D Range	Fitting Material	Connection Type 1 (Left or Large Diameter Side)	Surface Finish	Connection Type 2 (Right or Small Diameter Side)	Nominal O.D. D(Ø)	Dia., Center	Connection Type (between Equal Type/Dia. Fittings)	Combination of Tee and Cross at Connecting Part (A-B-C)
  Fitting	90°	5.5S~6.5S	SUS304	-	Inner and Outer Surface Grinding	-	-	Equal Dia., Concentric	Weld-On	-

  From: 8,730,414 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3K Clamp

  OSAKA SANITARY

  [Features]・ Sanitary clamp for high pressure・ ISO standard clamp union fittings are unions that are assembled by sandwiching a gasket with ferrules and tightening with a clamp・ The union has a structure in which the inner surface of the pipe and the sealing surface match when tightened・ The welded clamp union is joined to the sanitary pipe by argon arc TIG welding. The inner and outer diameter dimensions of the welded part are based on the dimensions of JIS G 3447 stainless steel sanitary pipe・ The expandable clamp union uses a tube expander to expand the pipe and join the fitting

  Type	Fitting Shape	Nominal O.D. D Range	Fitting Material	Connection Type 1 (Left or Large Diameter Side)	Surface Finish	Connection Type 2 (Right or Small Diameter Side)	Nominal O.D. D(Ø)	Dia., Center	Connection Type (between Equal Type/Dia. Fittings)	Combination of Tee and Cross at Connecting Part (A-B-C)
  Clamp	-	5.5S~6.5S	-	ISO Ferrule Union	-	-	-	-	-	-

  From: 1,938,326 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sanitary Flange (Loose Flange)

  OSAKA SANITARY

  Made in Japan inside/outside 320–400 buff polishing[Features]▪ Maximum pressure 1.96 MPa.· The liquid pool seen in the gasket part in the JIS standard flange is not present.· Since it has a loose flange format, bolt hole centering is required when piping construction is done.▪ Superior strength against expansion/contraction, and deflection of piping

  Type	Fitting Shape	Nominal O.D. D Range	Fitting Material	Connection Type 1 (Left or Large Diameter Side)	Surface Finish	Connection Type 2 (Right or Small Diameter Side)	Nominal O.D. D(Ø)	Dia., Center	Connection Type (between Equal Type/Dia. Fittings)	Combination of Tee and Cross at Connecting Part (A-B-C)
  Others	-	5.5S~6.5S	SUS304	-	Inner and Outer Surface Grinding	-	-	-	-	-

  From: 3,840,715 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2D Clamp

  OSAKA SANITARY

  [Features]・ 8 A to 15 A, 1.0S to 1.5S are shared・ ISO standard clamp union fittings are unions that are assembled by sandwiching a gasket with ferrules and tightening with a clamp・ The union has a structure in which the inner surface of the pipe and the sealing surface match when tightened・ The welded clamp union is joined to the sanitary pipe by argon arc TIG welding. The inner and outer diameter dimensions of the welded part are based on the dimensions of JIS G 3447 stainless steel sanitary pipe・ The expandable clamp union uses a tube expander to expand the pipe and join the fitting

  Type	Fitting Shape	Nominal O.D. D Range	Fitting Material	Connection Type 1 (Left or Large Diameter Side)	Surface Finish	Connection Type 2 (Right or Small Diameter Side)	Nominal O.D. D(Ø)	Dia., Center	Connection Type (between Equal Type/Dia. Fittings)	Combination of Tee and Cross at Connecting Part (A-B-C)
  Clamp	-	5.5S~6.5S	-	ISO Ferrule Union	-	-	-	-	-	-

  From: 2,438,326 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sanitary Flange (Fixed Flange).

  OSAKA SANITARY

  [Features]·Made in Japan, internal and external 320 to 400# polished. · Stainless steel

  Type	Fitting Shape	Nominal O.D. D Range	Fitting Material	Connection Type 1 (Left or Large Diameter Side)	Surface Finish	Connection Type 2 (Right or Small Diameter Side)	Nominal O.D. D(Ø)	Dia., Center	Connection Type (between Equal Type/Dia. Fittings)	Combination of Tee and Cross at Connecting Part (A-B-C)
  Others	-	5.5S~6.5S	SUS304	-	Inner and Outer Surface Grinding	-	-	-	-	-

  From: 5,853,981 VND
  Days to Ship: Số ngày giao hàng: 19 Day(s) or more

  19 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Type
Fitting Shape
Nominal O.D. D Range
Fitting Material
Connection Type 1 (Left or Large Diameter Side)
Surface Finish
Connection Type 2 (Right or Small Diameter Side)
Nominal O.D. D(Ø)
Dia., Center
Connection Type (between Equal Type/Dia. Fittings)
Combination of Tee and Cross at Connecting Part (A-B-C)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSAKA SANITARY	OSAKA SANITARY	OSAKA SANITARY	OSAKA SANITARY	OSAKA SANITARY	OSAKA SANITARY	OSAKA SANITARY	OSAKA SANITARY
Product SeriesDòng sản phẩm	Weld Ferrule	Ferrule Gasket Type B	Ferrule Cap	Welded Elbows	3K Clamp	Sanitary Flange (Loose Flange)	2D Clamp	Sanitary Flange (Fixed Flange).
CADCAD	2D			2D
From	1,929,178 VND	262,831 VND	2,551,223 VND	8,730,414 VND	1,938,326 VND	3,840,715 VND	2,438,326 VND	5,853,981 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	11 Day(s) or more	4 Day(s) or more	19 Day(s) or more	11 Day(s) or more	19 Day(s) or more
Type	Fitting	Gaskets	Fitting	Fitting	Clamp	Others	Clamp	Others
Fitting Shape	Straight	-	Cap	90°	-	-	-	-
Nominal O.D. D Range	5.5S~6.5S	5.5S~6.5S	5.5S~6.5S	5.5S~6.5S	5.5S~6.5S	5.5S~6.5S	5.5S~6.5S	5.5S~6.5S
Fitting Material	SUS304 / SUS316L	-	SUS304 / SUS316L	SUS304	-	SUS304	-	SUS304
Connection Type 1 (Left or Large Diameter Side)	ISO Ferrule Union	-	ISO Ferrule Union	-	ISO Ferrule Union	-	ISO Ferrule Union	-
Surface Finish	Machined Finishing	-	Only Outer Surface Grinding	Inner and Outer Surface Grinding	-	Inner and Outer Surface Grinding	-	Inner and Outer Surface Grinding
Connection Type 2 (Right or Small Diameter Side)	Weld-On	-	-	-	-	-	-	-
Nominal O.D. D(Ø)	-	-	-	-	-	-	-	-
Dia., Center	Equal Dia., Concentric	-	-	Equal Dia., Concentric	-	-	-	-
Connection Type (between Equal Type/Dia. Fittings)	-	-	-	Weld-On	-	-	-	-
Combination of Tee and Cross at Connecting Part (A-B-C)	-	-	-	-	-	-	-	-

Loading...Tải…