Air Nozzles（Features：Movable Discharge Port）

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nozzle TJ Type

  NABEYA

  Screw-in type nozzle. It can stably lean 35° forward or back, left or right.[Features]· The nozzle on the taper face can be inclined by 35° back and forth and around so you can apply it properly.

  CAD ：

  2D

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Point	-	-	Plastic	-	Angle Adjustable	-	Insert Nozzle	Movable Discharge Port	Solution

  From: 733,110 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nozzle LP Type

  NABEYA

  Round dish screw mounting nozzle. The copper tube nozzle can be freely oriented to the required position.　

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Point	-	-	Brass	-	Angle Adjustable / Straight	-	Insert Nozzle	Movable Discharge Port	Solution

  From: 796,356 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nozzle PM Type

  NABEYA

  Screw-in type nozzle. 10-MPa high-pressure type. It can stably lean 35 degrees forward or back, left or right.　[Features]· 10MPa high-pressure type

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Point	-	-	Stainless Steel / Brass	-	Angle Adjustable	-	Insert Nozzle	Movable Discharge Port	Solution

  From: 1,836,670 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Compact MX Series for Compressor

  DAIKOKENNETU

  With the Double-slit method, two processes can be done with one nozzle, which makes it possible to execute tasks such as water drainage almost perfectly.

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Straight	-	Compressor	Stainless Steel	Flat	Straight	Standard	Air Nozzles	Movable Discharge Port	Compressed Air

  From: 6,021,389 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nozzle JB Model

  NABEYA

  A screw-in nozzle that can lean 35° forward or back, left or right.　[Features]- The nozzle on the taper face can be inclined by 35° in any direction for precision spraying.

  CAD ：

  2D

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Point	-	-	Plastic	-	Angle Adjustable	-	Insert Nozzle	Movable Discharge Port	Solution

  From: 943,071 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nozzle SB Type

  NABEYA

  Press Fit Nozzle. Compact and suitable for embedding in machinery or fixtures. The edged tool does not interfere with fixtures.　[Features]· Can be embedded in machines or jigs so as not to interfere with blades or jigs.· The nozzle angle can be speedily changed

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Point	-	-	Plastic	-	Angle Adjustable	-	Insert Nozzle	Movable Discharge Port	Solution

  From: 677,663 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nozzle BU Type

  NABEYA

  [Features]· Round countersunk screw mount nozzle.· Nozzle angle of 70° that can be changed a lot.

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Point	-	-	Plastic	-	Angle Adjustable	-	Insert Nozzle	Movable Discharge Port	Solution

  From: 975,583 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nozzle JJ-Type

  NABEYA

  Press Fit Nozzle. Compact and can be incorporated into machinery or fixtures. The blade does not interfere with fixtures.[Features]· Can be incorporated into machinery or fixtures with no interference with blades or fixtures.· The nozzle angle can be quickly changed.

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Point	-	-	Plastic	-	Angle Adjustable	-	Insert Nozzle	Movable Discharge Port	Solution

  From: 631,763 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nozzle PJ Type

  NABEYA

  Screw-in type nozzle. It is compact and can be embedded in machinery or fixtures. The edged tool does not interfere with fixtures.　[Features]· Can be embedded to machines or jigs, without interfering with blades or jigs.· The nozzle angle can be quickly changed

  CAD ：

  2D

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Point	-	-	Plastic	-	Angle Adjustable	-	Insert Nozzle	Movable Discharge Port	Solution

  From: 1,182,753 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nozzle PM-ST Type

  NABEYA

  Screw-in nozzle. 10-MPa high-pressure type. Can stably tilt 35 degrees forward or back, left or right. [Features]· 10 MPa high-pressure type

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Point	-	-	Stainless Steel / Brass	-	Angle Adjustable	-	Insert Nozzle	Movable Discharge Port	Solution

  From: 1,094,271 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert Nozzle BE-Type

  NABEYA

  A round counter-sunk screw mounting nozzle. Compact, embeddable in machinery or fixtures, and does not interfere with blades or jigs.　

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Point	-	-	Plastic	-	Angle Adjustable	-	Insert Nozzle	Movable Discharge Port	Solution

  From: 771,715 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UT Ball Joint, UT Series Metal / Plastic Made

  IKEUCHI

  [Metal] Allows precise nozzle alignment after piping. Ideal for angled mounting or to allow change of direction as required.[Plastic] Enables angle adjustment while spraying up to 0.3 MPa.[Features]· Allows precise nozzle alignment after piping.· Ideal for angled mounting or to allow change of direction as required.· Available in sizes from 1/8 inch to 3/4 inch.· Enables angle adjustment while spraying up to 0.3 MPa.· No O-ring required. Can be tightened by hand.· Weight is less than half of the metal ball joint.· Very inexpensive due to the injection-molded construction.

  CAD ：

  2D

  Spray Pattern	Spraying Angle θ (at 0.5MPa)(deg)	Air Source	Material	Mounting Angle	Angle Adjustment	Blow Type	Type	Features	Applicable Fluid
  Air Nozzle Related Components	-	-	Stainless Steel / Plastic	-	-	-	Related Components	Movable Discharge Port	-

  From: 293,986 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Spray Pattern
Spraying Angle θ (at 0.5MPa)(deg)
Air Source
Material
Mounting Angle
Angle Adjustment
Blow Type
Type
Features
Applicable Fluid

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NABEYA	NABEYA	NABEYA	DAIKOKENNETU	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	IKEUCHI
Product SeriesDòng sản phẩm	Insert Nozzle TJ Type	Insert Nozzle LP Type	Insert Nozzle PM Type	Compact MX Series for Compressor	Insert Nozzle JB Model	Insert Nozzle SB Type	Insert Nozzle BU Type	Insert Nozzle JJ-Type	Insert Nozzle PJ Type	Insert Nozzle PM-ST Type	Insert Nozzle BE-Type	UT Ball Joint, UT Series Metal / Plastic Made
CADCAD	2D				2D				2D			2D
From	733,110 VND	796,356 VND	1,836,670 VND	6,021,389 VND	943,071 VND	677,663 VND	975,583 VND	631,763 VND	1,182,753 VND	1,094,271 VND	771,715 VND	293,986 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	12 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more
Spray Pattern	Point	Point	Point	Straight	Point	Point	Point	Point	Point	Point	Point	Air Nozzle Related Components
Spraying Angle θ (at 0.5MPa)(deg)	-	-	-	-	-	-	-	-	-	-	-	-
Air Source	-	-	-	Compressor	-	-	-	-	-	-	-	-
Material	Plastic	Brass	Stainless Steel / Brass	Stainless Steel	Plastic	Plastic	Plastic	Plastic	Plastic	Stainless Steel / Brass	Plastic	Stainless Steel / Plastic
Mounting Angle	-	-	-	Flat	-	-	-	-	-	-	-	-
Angle Adjustment	Angle Adjustable	Angle Adjustable / Straight	Angle Adjustable	Straight	Angle Adjustable	Angle Adjustable	Angle Adjustable	Angle Adjustable	Angle Adjustable	Angle Adjustable	Angle Adjustable	-
Blow Type	-	-	-	Standard	-	-	-	-	-	-	-	-
Type	Insert Nozzle	Insert Nozzle	Insert Nozzle	Air Nozzles	Insert Nozzle	Insert Nozzle	Insert Nozzle	Insert Nozzle	Insert Nozzle	Insert Nozzle	Insert Nozzle	Related Components
Features	Movable Discharge Port	Movable Discharge Port	Movable Discharge Port	Movable Discharge Port	Movable Discharge Port	Movable Discharge Port	Movable Discharge Port	Movable Discharge Port	Movable Discharge Port	Movable Discharge Port	Movable Discharge Port	Movable Discharge Port
Applicable Fluid	Solution	Solution	Solution	Compressed Air	Solution	Solution	Solution	Solution	Solution	Solution	Solution	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	NABEYA	NABEYA	NABEYA	DAIKOKENNETU	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	IKEUCHI
Product SeriesDòng sản phẩm	Insert Nozzle TJ Type	Insert Nozzle LP Type	Insert Nozzle PM Type	Compact MX Series for Compressor	Insert Nozzle JB Model	Insert Nozzle SB Type	Insert Nozzle BU Type	Insert Nozzle JJ-Type	Insert Nozzle PJ Type	Insert Nozzle PM-ST Type	Insert Nozzle BE-Type	UT Ball Joint, UT Series Metal / Plastic Made

Loading...Tải…