Ejector Sleeves（Inner dia. tolerance：+0.01/0）

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

  MISUMI

  If your product inquiries are out of catalogue, we can support by drawing (Made to order). Please contact PM_BD@misumi.co.th

  CAD ：

  2D / 3D

  D/P (Shaft diameter)(mm)	V (Hole diameter)(mm)	Material	Head thickness	Product composition	Concentricity between the hole and shaft diameters	Shaft diameter tolerance	Inner dia. tolerance	Surface treatment	Boring method	Tapered or not	Center pin tip shape	P (Tip diameter)(mm)
  3.2 ～ 14	0.8 ～ 12.2	SKH51	4mm(T4)	Single sleeve	◎0.005 / ◎0.01	0/-0.005 / -0.01/-0.02	+0.01/0	No	Grinding	No	No	-

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

  MISUMI

  This is an ejector sleeve whose tip wall thickness can be set to a minimum of 0.6mm. Compared to regular products, this product allows you to select the length of the inner sliding part (S dimension) up to 50mm.

  CAD ：

  2D / 3D

  D/P (Shaft diameter)(mm)	V (Hole diameter)(mm)	Material	Head thickness	Product composition	Concentricity between the hole and shaft diameters	Shaft diameter tolerance	Inner dia. tolerance	Surface treatment	Boring method	Tapered or not	Center pin tip shape	P (Tip diameter)(mm)
  3.2 ～ 14	0.8 ～ 12.2	SKH51	4mm(T4) / 6mm(JIS) / 8mm(JIS)	Single sleeve	◎0.01	0/-0.005 / -0.01/-0.02	+0.01/0	No	Wire cutting & polishing	No	No	-

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Ejector Sleeves (Bushings for straight ejector pins)

  MISUMI

  This is an ejector sleeve whose total length (L dimension) can be set to a minimum of 15mm. The wall thickness at the tip can be set to a minimum of 0.6mm, and the length from the sliding part to the relief hole is tapered.

  CAD ：

  2D / 3D

  D/P (Shaft diameter)(mm)	V (Hole diameter)(mm)	Material	Head thickness	Product composition	Concentricity between the hole and shaft diameters	Shaft diameter tolerance	Inner dia. tolerance	Surface treatment	Boring method	Tapered or not	Center pin tip shape	P (Tip diameter)(mm)
  2.5 ～ 8	1 ～ 6.8	SKH51	4mm(T4)	Single sleeve	◎0.01	0/-0.005 / -0.01/-0.02	+0.01/0	No	-	Yes	No	-

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
D/P (Shaft diameter)(mm)
V (Hole diameter)(mm)
Material
Head thickness
Product composition
Concentricity between the hole and shaft diameters
Shaft diameter tolerance
Inner dia. tolerance
Surface treatment
Boring method
Tapered or not
Center pin tip shape
P (Tip diameter)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-	Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-	Short Ejector Sleeves (Bushings for straight ejector pins)
CADCAD	2D / 3D	2D / 3D	2D / 3D
From
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
D/P (Shaft diameter)(mm)	3.2 ～ 14	3.2 ～ 14	2.5 ～ 8
V (Hole diameter)(mm)	0.8 ～ 12.2	0.8 ～ 12.2	1 ～ 6.8
Material	SKH51	SKH51	SKH51
Head thickness	4mm(T4)	4mm(T4) / 6mm(JIS) / 8mm(JIS)	4mm(T4)
Product composition	Single sleeve	Single sleeve	Single sleeve
Concentricity between the hole and shaft diameters	◎0.005 / ◎0.01	◎0.01	◎0.01
Shaft diameter tolerance	0/-0.005 / -0.01/-0.02	0/-0.005 / -0.01/-0.02	0/-0.005 / -0.01/-0.02
Inner dia. tolerance	+0.01/0	+0.01/0	+0.01/0
Surface treatment	No	No	No
Boring method	Grinding	Wire cutting & polishing	-
Tapered or not	No	No	Yes
Center pin tip shape	No	No	No
P (Tip diameter)(mm)	-	-	-

Loading...Tải…